1. |
|
|
2. |
- Akbar, Fariia Iasmin, et al.
(författare)
-
High-pressure dysprosium carbides containing carbon dimers, trimers, chains, and ribbons
- 2024
-
Ingår i: Carbon. - : PERGAMON-ELSEVIER SCIENCE LTD. - 0008-6223 .- 1873-3891. ; 228
-
Tidskriftsartikel (refereegranskat)abstract
- Exploring the chemistry of materials at high pressure leads to discoveries of previously unknown compounds and phenomena. Here chemical reactions between elemental dysprosium and carbon were studied in laser-heated diamond anvil cells at pressures up to 95 GPa and temperatures of similar to 2800 K. In situ single-crystal synchrotron X-ray diffraction (SCXRD) analysis of the reaction products revealed the formation of novel dysprosium carbides, gamma-DyC2, Dy5C9, and gamma-Dy4C5, along with previously reported Dy3C2 and Dy4C3 . The crystal structures of gamma-DyC (2) and Dy (5) C (9) feature infinite flat carbon polyacene-like ribbons and cis-polyacetylene-type chains, respectively. In the structure of gamma-Dy4C5, carbon atoms form dimers and non-linear trimers. Dy3C2 contains ethanide-type carbon dumbbells, and Dy4C3 is methanide featuring single carbon atoms. Density functional theory calculations reproduce well the crystal structures of high-pressure dysprosium carbides and reveal conjugated pi-electron systems in novel infinite carbon polyanions. This work demonstrates that complex carbon homoatomic species previously unknown in organic chemistry can be synthesized at high pressures by direct reactions of carbon with metals.
|
|
3. |
- Akbar, Fariia Iasmin, et al.
(författare)
-
High-pressure synthesis of dysprosium carbides
- 2023
-
Ingår i: Frontiers in Chemistry. - : FRONTIERS MEDIA SA. - 2296-2646. ; 11
-
Tidskriftsartikel (refereegranskat)abstract
- Chemical reactions between dysprosium and carbon were studied in laser-heated diamond anvil cells at pressures of 19, 55, and 58 GPa and temperatures of similar to 2500 K. In situ single-crystal synchrotron X-ray diffraction analysis of the reaction products revealed the formation of novel dysprosium carbides, Dy4C3 and Dy3C2, and dysprosium sesquicarbide Dy2C3 previously known only at ambient conditions. The structure of Dy4C3 was found to be closely related to that of dysprosium sesquicarbide Dy2C3 with the Pu2C3-type structure. Ab initio calculations reproduce well crystal structures of all synthesized phases and predict their compressional behavior in agreement with our experimental data. Our work gives evidence that high-pressure synthesis conditions enrich the chemistry of rare earth metal carbides.
|
|
4. |
- Aslandukov, Andrey, et al.
(författare)
-
Stabilization of N6 and N8 anionic units and 2D polynitrogen layers in high-pressure scandium polynitrides
- 2024
-
Ingår i: Nature Communications. - : NATURE PORTFOLIO. - 2041-1723. ; 15:1
-
Tidskriftsartikel (refereegranskat)abstract
- Nitrogen catenation under high pressure leads to the formation of polynitrogen compounds with potentially unique properties. The exploration of the entire spectrum of poly- and oligo-nitrogen moieties is still in its earliest stages. Here, we report on four novel scandium nitrides, Sc2N6, Sc2N8, ScN5, and Sc4N3, synthesized by direct reaction between yttrium and nitrogen at 78-125 GPa and 2500 K in laser-heated diamond anvil cells. High-pressure synchrotron single-crystal X-ray diffraction reveals that in the crystal structures of the nitrogen-rich Sc2N6, Sc2N8, and ScN5 phases nitrogen is catenated forming previously unknown N-6(6)- and N-8(6)- units and infinity 2(N-5(3-)) anionic corrugated 2D-polynitrogen layers consisting of fused N-12 rings. Density functional theory calculations, confirming the dynamical stability of the synthesized compounds, show that Sc2N6 and Sc2N8 possess an anion-driven metallicity, while ScN5 is an indirect semiconductor. Sc2N6, Sc2N8, and ScN5 solids are promising high-energy-density materials with calculated volumetric energy density, detonation velocity, and detonation pressure higher than those of TNT.
|
|
5. |
- Aslandukov, Andrey, et al.
(författare)
-
Stabilization Of The CN35− Anion In Recoverable High-pressure Ln3O2(CN3) (Ln=La, Eu, Gd, Tb, Ho, Yb) Oxoguanidinates
- 2023
-
Ingår i: Angewandte Chemie International Edition. - : WILEY-V C H VERLAG GMBH. - 1433-7851 .- 1521-3773. ; 62:47
-
Tidskriftsartikel (refereegranskat)abstract
- A series of isostructural Ln(3)O(2)(CN3) (Ln=La, Eu, Gd, Tb, Ho, Yb) oxoguanidinates was synthesized under high-pressure (25-54 GPa) high-temperature (2000-3000 K) conditions in laser-heated diamond anvil cells. The crystal structure of this novel class of compounds was determined via synchrotron single-crystal X-ray diffraction (SCXRD) as well as corroborated by X-ray absorption near edge structure (XANES) measurements and density functional theory (DFT) calculations. The Ln(3)O(2)(CN3) solids are composed of the hitherto unknown CN35- guanidinate anion-deprotonated guanidine. Changes in unit cell volumes and compressibility of Ln(3)O(2)(CN3) (Ln=La, Eu, Gd, Tb, Ho, Yb) compounds are found to be dictated by the lanthanide contraction phenomenon. Decompression experiments show that Ln(3)O(2)(CN3) compounds are recoverable to ambient conditions. The stabilization of the CN35- guanidinate anion at ambient conditions provides new opportunities in inorganic and organic synthetic chemistry.
|
|
6. |
- Aslandukov, Andrey, et al.
(författare)
-
Synthesis of LaCN3, TbCN3, CeCN5, and TbCN5 Polycarbonitrides at Megabar Pressures
- 2024
-
Ingår i: Journal of the American Chemical Society. - : AMER CHEMICAL SOC. - 0002-7863 .- 1520-5126. ; 146:26, s. 18161-18171
-
Tidskriftsartikel (refereegranskat)abstract
- Inorganic ternary metal-C-N compounds with covalently bonded C-N anions encompass important classes of solids such as cyanides and carbodiimides, well known at ambient conditions and composed of [CN](-) and [CN2](2-) anions, as well as the high-pressure formed guanidinates featuring [CN3](5-) anion. At still higher pressures, carbon is expected to be 4-fold coordinated by nitrogen atoms, but hitherto, such CN4-built anions are missing. In this study, four polycarbonitride compounds (LaCN3, TbCN3, CeCN5, and TbCN5) are synthesized in laser-heated diamond anvil cells at pressures between 90 and 111 GPa. Synchrotron single-crystal X-ray diffraction (SCXRD) reveals that their crystal structures are built of a previously unobserved anionic single-bonded carbon-nitrogen three-dimensional (3D) framework consisting of CN4 tetrahedra connected via di- or oligo-nitrogen linkers. A crystal-chemical analysis demonstrates that these polycarbonitride compounds have similarities to lanthanide silicon phosphides. Decompression experiments reveal the existence of LaCN3 and CeCN5 compounds over a very large pressure range. Density functional theory (DFT) supports these discoveries and provides further insight into the stability and physical properties of the synthesized compounds.
|
|
7. |
- Aslandukova, Alena, et al.
(författare)
-
Diverse high-pressure chemistry in Y-NH3BH3 and Y–paraffin oil systems
- 2024
-
Ingår i: Science Advances. - : AMER ASSOC ADVANCEMENT SCIENCE. - 2375-2548. ; 10:11
-
Tidskriftsartikel (refereegranskat)abstract
- The yttrium-hydrogen system has gained attention because of near-ambient temperature superconductivity reports in yttrium hydrides at high pressures. We conducted a study using synchrotron single-crystal x-ray diffraction (SCXRD) at 87 to 171 GPa, resulting in the discovery of known (two YH3 phases) and five previously unknown yttrium hydrides. These were synthesized in diamond anvil cells by laser heating yttrium with hydrogen-rich precursors-ammonia borane or paraffin oil. The arrangements of yttrium atoms in the crystal structures of new phases were determined on the basis of SCXRD, and the hydrogen content estimations based on empirical relations and ab initio calculations revealed the following compounds: Y3H11, Y2H9, Y4H23, Y13H75, and Y4H25. The study also uncovered a carbide (YC2) and two yttrium allotropes. Complex phase diversity, variable hydrogen content in yttrium hydrides, and their metallic nature, as revealed by ab initio calculations, underline the challenges in identifying superconducting phases and understanding electronic transitions in high-pressure synthesized materials.
|
|
8. |
- Aslandukova, Alena, et al.
(författare)
-
High-pressure hP3 yttrium allotrope with CaHg2-type structure as a prototype of the hP3 rare-earth hydride series
- 2023
-
Ingår i: Physical Review B. - : AMER PHYSICAL SOC. - 2469-9950 .- 2469-9969. ; 107:1
-
Tidskriftsartikel (refereegranskat)abstract
- A high-pressure (HP) yttrium allotrope, hP3-Y (space group P6/mmm), was synthesized in a multi-anvil press at 20 GPa and 2000 K which is recoverable to ambient conditions. Its relative stability and electronic properties were investigated using density functional theory calculations. A hP3-Y derivative hydride, hP3-YHx, with a variable hydrogen content (x = 2.8, 3, 2.4), was synthesized in diamond anvil cells by the direct reaction of yttrium with paraffin oil, hydrogen gas, and ammonia borane upon laser heating to similar to 3000 K at 51, 45 and 38 GPa, respectively. Room-temperature decompression leads to gradual reduction and eventually the complete loss of hydrogen at ambient conditions. Isostructural hP3-NdHx and hP3-GdHx hydrides were synthesized from Nd and Gd metals and paraffin oil, suggesting that the hP3-Y structure type may be common for rare-earth elements. Our results expand the list of allotropes of trivalent lanthanides and their hydrides and suggest that they should be considered in the context of studies of HP behavior and properties of this broad class of materials.
|
|
9. |
- Aslandukova, Alena, et al.
(författare)
-
High-Pressure oC16-YBr3 Polymorph Recoverable to Ambient Conditions: From 3D Framework to Layered Material
- 2024
-
Ingår i: Inorganic Chemistry. - : AMER CHEMICAL SOC. - 0020-1669 .- 1520-510X.
-
Tidskriftsartikel (refereegranskat)abstract
- Exfoliation of graphite and the discovery of the unique properties of graphene-graphite's single layer-have raised significant attention to layered compounds as potential precursors to 2D materials with applications in optoelectronics, spintronics, sensors, and solar cells. In this work, a new orthorhombic polymorph of yttrium bromide, oC16-YBr3 was synthesized from yttrium and CBr4 in a laser-heated diamond anvil cell at 45 GPa and 3000 K. The structure of oC16-YBr3 was solved and refined using in situ synchrotron single-crystal X-ray diffraction. At high pressure, it can be described as a 3D framework of YBr9 polyhedra, but upon decompression below 15 GPa, the structure motif changes to layered, with layers comprising edge-sharing YBr8 polyhedra weakly bonded by van der Waals interactions. The layered oC16-YBr3 material can be recovered to ambient conditions, and according to Perdew-Burke-Ernzerhof-density functional theory calculations, it exhibits semiconductor properties with a band gap that is highly sensitive to pressure. This polymorph possesses a low exfoliation energy of 0.30 J/m(2). Our results expand the list of layered trivalent rare-earth metal halides and provide insights into how high pressure alters their structural motifs and physical properties.
|
|
10. |
- Bykova, Elena, et al.
(författare)
-
Synthesis, crystal structure, and properties of stoichiometric hard tungsten tetraboride, WB4
- 2022
-
Ingår i: Journal of Materials Chemistry A. - : ROYAL SOC CHEMISTRY. - 2050-7488 .- 2050-7496. ; 10:37, s. 20111-20120
-
Tidskriftsartikel (refereegranskat)abstract
- Tungsten tetraboride has been known so far as a non-stoichiometric compound with a variable composition (e.g. WB4-x, WB4+x). Its mechanical properties could exceed those of hard tungsten carbide, which is widely used nowadays in science and technology. The existence of stoichiometric WB4 has not been proven yet, and its structure and crystal chemistry remain debatable to date. Here we report the synthesis of single crystals of the stoichiometric WB4 phase under high-pressure high-temperature conditions. The crystal structure of WB4 was determined using synchrotron single-crystal X-ray diffraction. In situ high-pressure compressibility measurements show that the bulk modulus of WB4 is 238.6(2) GPa for B = 5.6(0). Measurements of mechanical properties of bulk polycrystalline sub-millimeter size samples under ambient conditions reveal a hardness of similar to 36 GPa, confirming that the material falls in the category of superhard materials.
|
|