| 1. |
- Beal, Jacob, et al.
(författare)
-
Robust estimation of bacterial cell count from optical density
- 2020
-
Ingår i: Communications Biology. - : Springer Science and Business Media LLC. - 2399-3642. ; 3:1
-
Tidskriftsartikel (refereegranskat)abstract
- Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data.
|
|
| 2. |
- Kristan, Matej, et al.
(författare)
-
The Ninth Visual Object Tracking VOT2021 Challenge Results
- 2021
-
Ingår i: 2021 IEEE/CVF INTERNATIONAL CONFERENCE ON COMPUTER VISION WORKSHOPS (ICCVW 2021). - : IEEE COMPUTER SOC. - 9781665401913 ; , s. 2711-2738
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge VOT2021 is the ninth annual tracker benchmarking activity organized by the VOT initiative. Results of 71 trackers are presented; many are state-of-the-art trackers published at major computer vision conferences or in journals in recent years. The VOT2021 challenge was composed of four sub-challenges focusing on different tracking domains: (i) VOT-ST2021 challenge focused on short-term tracking in RGB, (ii) VOT-RT2021 challenge focused on "real-time" short-term tracking in RGB, (iii) VOT-LT2021 focused on long-term tracking, namely coping with target disappearance and reappearance and (iv) VOT-RGBD2021 challenge focused on long-term tracking in RGB and depth imagery. The VOT-ST2021 dataset was refreshed, while VOT-RGBD2021 introduces a training dataset and sequestered dataset for winner identification. The source code for most of the trackers, the datasets, the evaluation kit and the results along with the source code for most trackers are publicly available at the challenge website(1).
|
|
| 3. |
- Huang, Hongyun, et al.
(författare)
-
Clinical Cell Therapy Guidelines for Neurorestoration (IANR/CANR 2017)
- 2018
-
Ingår i: Cell Transplantation. - : SAGE Publications. - 0963-6897 .- 1555-3892. ; 27:2, s. 310-324
-
Forskningsöversikt (refereegranskat)abstract
- Cell therapy has been shown to be a key clinical therapeutic option for central nervous system diseases or damage. Standardization of clinical cell therapy procedures is an important task for professional associations devoted to cell therapy. The Chinese Branch of the International Association of Neurorestoratology (IANR) completed the first set of guidelines governing the clinical application of neurorestoration in 2011. The IANR and the Chinese Association of Neurorestoratology (CANR) collaborated to propose the current version "Clinical Cell Therapy Guidelines for Neurorestoration (IANR/CANR 2017)". The IANR council board members and CANR committee members approved this proposal on September 1, 2016, and recommend it to clinical practitioners of cellular therapy. These guidelines include items of cell type nomenclature, cell quality control, minimal suggested cell doses, patient-informed consent, indications for undergoing cell therapy, contraindications for undergoing cell therapy, documentation of procedure and therapy, safety evaluation, efficacy evaluation, policy of repeated treatments, do not charge patients for unproven therapies, basic principles of cell therapy, and publishing responsibility.
|
|
| 4. |
- Song, Xianli, et al.
(författare)
-
Enhanced transport and favorable distribution of Li-ion in a poly(ionic liquid) based electrolyte facilitated by Li1.3Al0.3Ti1.7(PO4)3 nanoparticles for highly-safe lithium metal batteries
- 2021
-
Ingår i: Electrochimica Acta. - : Elsevier. - 0013-4686 .- 1873-3859. ; 368
-
Tidskriftsartikel (refereegranskat)abstract
- Solid-state batteries, which exhibit characteristics including uniform Li deposition, non-flammability and low interfacial resistance, are desirable for novel energy storage devices. Herein, a self-standing, fireproof and electrochemically stable organic-inorganic composite ionogel electrolyte was carefully designed and prepared by using polymerized ionic liquid (PIL), ionic liquid (IL), lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) and lithium aluminum titanium phosphate (LATP) nanoparticles. The incorporation of LATP nanoparticles into polymer backbone was found to facilitate ionic transport due to the homogenous Li+ distribution, which would further boost the ionic conductivity and mechanical properties. In addition, the introduction of IL favored the reduction of interface resistance. Benefiting from the nonflammability, the thermal shrinkage performance of as-prepared electrolyte could stand over a broad operating temperature range. A Li/Li symmetric cell containing optimized PIL-14 wt% LATP could be cycled steadily for over 2000 h at 50 °C. A lithium metal battery containing composite ionogel electrolyte exhibited an outstanding specific capacity of 145 mAh g−1 and 95% capacity retention at 50°C even after 100 cycles. This study indicates that the co-employment of IL and inorganic nanoparticle is an effective strategy for the construction of organic-inorganic hybrid electrolytes for high-safety solid-state lithium metal batteries (LMBs).
|
|
| 5. |
- Tian, Shiwei, et al.
(författare)
-
Investigation on the microstructure evolution and dynamic recrystallization mechanisms of TiAl alloy at elevated temperature
- 2021
-
Ingår i: Journal of Materials Research and Technology. - : Elsevier BV. - 2238-7854. ; 14, s. 968-984
-
Tidskriftsartikel (refereegranskat)abstract
- The flow stress–strain curves appear to be sensitive to deformation conditions. The ratio of critical strain to peak strain εc/εp follows a linear relationship except when the temperature is 1240 °C and the strain rate is 0.001 s−1. During the deformation, the fragmentation and decomposition of γ/α2 lamellae are related to recrystallization of α2 and γ laths in the lamellae and the γ → α2 phase transformation, the former depends on dislocation slip and twinning, and the latter is related to temperature, local stress concentration and diffusion time. As for the recrystallization mechanisms, the γ phase is discontinuous dynamic recrystallization (DDRX) mode, while the α2 phase relies on continuous dynamic recrystallization (CDRX) mode. The β phase has more low-angle grain boundaries (LAGB) during deformation, indicating the continuous coordinated deformation, and this explains the enlarged hot working window of the TiAl alloy (1165–1240 °C/0.001 ~ 1 s−1 and 1120–1165 °C/0.001–0.4 s−1).
|
|
| 6. |
- Abelev, Betty, et al.
(författare)
-
Long-range angular correlations on the near and away side in p-Pb collisions at root S-NN=5.02 TeV
- 2013
-
Ingår i: Physics Letters. Section B: Nuclear, Elementary Particle and High-Energy Physics. - : Elsevier BV. - 0370-2693. ; 719:1-3, s. 29-41
-
Tidskriftsartikel (refereegranskat)abstract
- Angular correlations between charged trigger and associated particles are measured by the ALICE detector in p-Pb collisions at a nucleon-nucleon centre-of-mass energy of 5.02 TeV for transverse momentum ranges within 0.5 < P-T,P-assoc < P-T,P-trig < 4 GeV/c. The correlations are measured over two units of pseudorapidity and full azimuthal angle in different intervals of event multiplicity, and expressed as associated yield per trigger particle. Two long-range ridge-like structures, one on the near side and one on the away side, are observed when the per-trigger yield obtained in low-multiplicity events is subtracted from the one in high-multiplicity events. The excess on the near-side is qualitatively similar to that recently reported by the CMS Collaboration, while the excess on the away-side is reported for the first time. The two-ridge structure projected onto azimuthal angle is quantified with the second and third Fourier coefficients as well as by near-side and away-side yields and widths. The yields on the near side and on the away side are equal within the uncertainties for all studied event multiplicity and p(T) bins, and the widths show no significant evolution with event multiplicity or p(T). These findings suggest that the near-side ridge is accompanied by an essentially identical away-side ridge. (c) 2013 CERN. Published by Elsevier B.V. All rights reserved.
|
|
| 7. |
- Abelev, Betty, et al.
(författare)
-
Measurement of prompt J/psi and beauty hadron production cross sections at mid-rapidity in pp collisions at root s=7 TeV
- 2012
-
Ingår i: Journal of High Energy Physics. - 1029-8479. ; :11
-
Tidskriftsartikel (refereegranskat)abstract
- The ALICE experiment at the LHC has studied J/psi production at mid-rapidity in pp collisions at root s = 7 TeV through its electron pair decay on a data sample corresponding to an integrated luminosity L-int = 5.6 nb(-1). The fraction of J/psi from the decay of long-lived beauty hadrons was determined for J/psi candidates with transverse momentum p(t) > 1,3 GeV/c and rapidity vertical bar y vertical bar < 0.9. The cross section for prompt J/psi mesons, i.e. directly produced J/psi and prompt decays of heavier charmonium states such as the psi(2S) and chi(c) resonances, is sigma(prompt J/psi) (p(t) > 1.3 GeV/c, vertical bar y vertical bar < 0.9) = 8.3 +/- 0.8(stat.) +/- 1.1 (syst.)(-1.4)(+1.5) (syst. pol.) mu b. The cross section for the production of b-hadrons decaying to J/psi with p(t) > 1.3 GeV/c and vertical bar y vertical bar < 0.9 is a sigma(J/psi <- hB) (p(t) > 1.3 GeV/c, vertical bar y vertical bar < 0.9) = 1.46 +/- 0.38 (stat.)(-0.32)(+0.26) (syst.) mu b. The results are compared to QCD model predictions. The shape of the p(t) and y distributions of b-quarks predicted by perturbative QCD model calculations are used to extrapolate the measured cross section to derive the b (b) over bar pair total cross section and d sigma/dy at mid-rapidity.
|
|
| 8. |
- Hu, Jinhong, et al.
(författare)
-
Safety and immunogenicity of a malaria vaccine, Plasmodium falciparum AMA-1/MSP-1 chimeric protein formulated in montanide ISA 720 in healthy adults
- 2008
-
Ingår i: PLOS ONE. - : PLOS. - 1932-6203. ; 3:4
-
Tidskriftsartikel (refereegranskat)abstract
- BACKGROUND: The P. falciparum chimeric protein 2.9 (PfCP-2.9) consisting of the sequences of MSP1-19 and AMA-1 (III) is a malaria vaccine candidate that was found to induce inhibitory antibodies in rabbits and monkeys. This was a phase I randomized, single-blind, placebo-controlled, dose-escalation study to evaluate the safety and immunogenicity of the PfCP-2.9 formulated with a novel adjuvant Montanide ISA720. Fifty-two subjects were randomly assigned to 4 dose groups of 10 participants, each receiving the test vaccine of 20, 50, 100, or 200 microg respectively, and 1 placebo group of 12 participants receiving the adjuvant only.METHODS AND FINDINGS: The vaccine formulation was shown to be safe and well-tolerated, and none of the participants withdrew. The total incidence of local adverse events (AEs) was 75%, distributed among 58% of the placebo group and 80% of those vaccinated. Among the vaccinated, 65% had events that were mild and 15% experienced moderate AEs. Almost all systemic adverse reactions observed in this study were graded as mild and required no therapy. The participants receiving the test vaccine developed detectable antibody responses which were boosted by the repeated vaccinations. Sixty percent of the vaccinated participants had high ELISA titers (>1:10,000) of antigen-specific antibodies which could also recognize native parasite proteins in an immunofluorescence assay (IFA).CONCLUSION: This study is the first clinical trial for this candidate and builds on previous investigations supporting PfCP-2.9/ISA720 as a promising blood-stage malaria vaccine. Results demonstrate safety, tolerability (particularly at the lower doses tested) and immunogenicity of the formulation. Further clinical development is ongoing to explore optimizing the dose and schedule of the formulation to decrease reactogenicity without compromising immunogenicity.TRIAL REGISTRATION: Chinese State Food and Drug Administration (SFDA) 2002SL0046; Controlled-Trials.com ISRCTN66850051 [66850051].
|
|
| 9. |
- Jia, Xiaomin, et al.
(författare)
-
Single crystal metal-organic framework constructed by vertically self-pillared nanosheets and its derivative for oriented lithium plating
- 2021
-
Ingår i: Cuihuà xuébào. - : Elsevier BV. - 0253-9837 .- 1872-2067. ; 42:9, s. 1553-1560
-
Tidskriftsartikel (refereegranskat)abstract
- This vertically self-pillared (VSP) structure extends the application range of traditional porous materials with facile mass/ion transport and enhanced reaction kinetics. Here, we prepare a single crystal metal-organic framework (MOF), employing the ZIF-67 structure as a proof of concept, which is constructed by vertically self-pillared nanosheets (VSP-MOF). We further converted VSP-MOF into VSP-cobalt sulfide (VSP-CoS2) through a sulfidation process. Catalysis plays an important role in almost all battery technologies; for metallic batteries, lithium anodes exhibit a high theoretical specific capacity, low density, and low redox potential. However, during the half-cell reaction (Li++e=Li), uncontrolled dendritic Li penetrates the separator and solid electrolyte interphase layer. When employed as a composite scaffold for lithium metal deposition, there are many advantage to using this framework: 1) the VSP-CoS2 substrate provides a high specific surface area to dissipate the ion flux and mass transfer and acts as a pre-catalyst, 2) the catalytic Co center favors the charge transfer process and preferentially binds the Li+ with the enhanced electrical fields, and 3) the VSP structure guides the metallic propagation along the nanosheet 2D orientation without the protrusive dendrites. All these features enable the VSP structure in metallic batteries with encouraging performances.
|
|
| 10. |
- Li, Jiajia, et al.
(författare)
-
Gravity field induced composite solid electrolytes enabling enhanced Li+ transport kinetics of lithium metal battery
- 2024
-
Ingår i: Chemical Engineering Journal. - : Elsevier. - 1385-8947 .- 1873-3212. ; 484
-
Tidskriftsartikel (refereegranskat)abstract
- Multilayer composite solid electrolytes (CSEs) exhibit many advantages over uniform monolayer CSEs but are hindered by high interlayer resistance and complex preparation methods. Herein, for the first time, a natural sedimentation strategy was developed to construct concentration gradient CSEs (GCSEs) for lithium-metal batteries (LMBs). This method utilizes intrinsic gravity and photopolymerization to achieve multiple functions in the monolayer, avoiding additional interlayer resistance and reducing preparation time. Owning to the concentration gradient structure, the Li+ transport on the PolyIL-rich side relies on the weak solvation of Li+ with EMIMTFSI, while the Li+ transport on the LLZTO-rich side follows the 'vehicular diffusion' mechanism with the aid of TFSI−, improving the Li+ transport and enhances the Li+ transference number, leading to the high stability to 2300 h for the Li//Li cell and stable operation at 4.3 V with 89.6 % capacity retention after 100 cycles for the assembled LMB. Moreover, compared with the monolayer uniform hybrid CSEs, the gradient structure alleviates uncoordinated thermal expansion between LLZTO and PolyIL, avoiding stress increase during cycling and battery capacity fade. This gradient strategy mitigates high interlayer resistance and offers a universal path to address the sluggish Li+ transportation in multilayer CSEs and improves compatibility between the electrolyte and electrodes in fabricating solid-state batteries.
|
|
