| 1. |
- Adlmann, Franz A., et al.
(författare)
-
Towards neutron scattering experiments with sub-millisecond time resolution
- 2015
-
Ingår i: Journal of applied crystallography. - 0021-8898 .- 1600-5767. ; 48, s. 220-226
-
Tidskriftsartikel (refereegranskat)abstract
- Neutron scattering techniques offer several unique opportunities in materials research. However, most neutron scattering experiments suffer from the limited flux available at current facilities. This limitation becomes even more severe if time-resolved or kinetic experiments are performed. A new method has been developed which overcomes these limitations when a reversible process is studied, without any compromise on resolution or beam intensity. It is demonstrated that, by recording in absolute time the neutron detector events linked to an excitation, information can be resolved on sub-millisecond timescales. Specifically, the concept of the method is demonstrated by neutron reflectivity measurements in time-of-flight mode at the Liquids Reflectometer located at the Spallation Neutron Source, Oak Ridge National Laboratory, Tennessee, USA, combined with in situ rheometry. The opportunities and limitations of this new technique are evaluated by investigations of a micellar polymer solution offering excellent scattering contrast combined with high sensitivity to shear.
|
|
| 2. |
- Adlmann, Franz A., et al.
(författare)
-
Överlåtaren : a fast way to transfer and orthogonalize two-dimensional off-specular reflectivity data
- 2016
-
Ingår i: Journal of applied crystallography. - 0021-8898 .- 1600-5767. ; 49, s. 2091-2099
-
Tidskriftsartikel (refereegranskat)abstract
- Reflectivity measurements offer unique opportunities for the study of surfaces and interfaces, and specular reflectometry has become a standard tool in materials science to resolve structures normal to the surface of a thin film. Off-specular scattering, which probes lateral structures, is more difficult to analyse, because the Fourier space being probed is highly anisotropic and the scattering pattern is truncated by the interface. As a result, scattering patterns collected with (especially time-of-flight) neutron reflectometers are difficult to transform into reciprocal space for comparison with model calculations. A program package is presented for a generic two-dimensional transformation of reflectometry data into q space and back. The data are represented on an orthogonal grid, allowing cuts along directions relevant for theoretical modelling. This treatment includes background subtraction as well as a full characterization of the resolution function. The method is optimized for computational performance using repeatable operations and standardized instrument settings.
|
|
| 3. |
|
|
| 4. |
|
|
| 5. |
- Altomare, Angela, et al.
(författare)
-
Advances in powder pattern indexing: N-TREOR09
- 2009
-
Ingår i: Journal of applied crystallography. - 0021-8898 .- 1600-5767. ; 42, s. 768-775
-
Tidskriftsartikel (refereegranskat)abstract
- Powder pattern indexing can still be a challenge, despite the great recent advances in theoretical approaches, computer speed and experimental devices. More plausible unit cells, belonging to different crystal systems, are frequently found by the indexing programs, and recognition of the correct one may not be trivial. The task is, however, of extreme importance: in case of failure a lot of effort and computing time may be wasted. The classical figures of merit for estimating the unit-cell reliability {i.e.M20 [de Wolff (1968). J. Appl. Cryst.1, 108–113] and FN [Smith & Snyder (1979). J. Appl. Cryst.12, 60–65]} sometimes fail. For this reason, a new figure of merit has been introduced in N-TREOR09, the updated version of the indexing package N-TREOR [Altomare, Giacovazzo, Guagliardi, Moliterni, Rizzi & Werner (2000). J. Appl. Cryst. 33, 1180–1186], combining the information supplied by M20 with additional parameters such as the number of unindexed lines, the degree of overlap in the pattern (the so-called number of statistically independent observations), the symmetry deriving from the automatic evaluation of the extinction group, and the agreement between the calculated and observed profiles. The use of the new parameters requires a dramatic modification of the procedures used worldwide: in the approach presented here, extinction symbol and unit-cell determination are simultaneously estimated. N-TREOR09 benefits also from an improved indexing procedure in the triclinic system and has been integrated into EXPO2009, the updated version of EXPO2004 [Altomare, Caliandro, Camalli, Cuocci, Giacovazzo, Moliterni & Rizzi (2004). J. Appl. Cryst. 37, 1025–1028]. The application of the new procedure to a large set of test structures is described.
|
|
| 6. |
- Aslandukov, Andrey, et al.
(författare)
-
Domain Auto Finder (DAFi) program : the analysis of single-crystal X-ray diffraction data from polycrystalline samples
- 2022
-
Ingår i: Journal of applied crystallography. - : Wiley-Blackwell Publishing Ltd.. - 0021-8898 .- 1600-5767. ; 55, s. 1383-1391
-
Tidskriftsartikel (refereegranskat)abstract
- This paper presents the Domain Auto Finder (DAFi) program and its application to the analysis of single-crystal X-ray diffraction (SC-XRD) data from multiphase mixtures of microcrystalline solids and powders. Superposition of numerous reflections originating from a large number of single-crystal domains of the same and/or different (especially unknown) phases usually precludes the sorting of reflections coming from individual domains, making their automatic indexing impossible. The DAFi algorithm is designed to quickly find subsets of reflections from individual domains in a whole set of SC-XRD data. Further indexing of all found subsets can be easily performed using widely accessible crystallographic packages. As the algorithm neither requires a priori crystallographic information nor is limited by the number of phases or individual domains, DAFi is powerful software to be used for studies of multiphase polycrystalline and microcrystalline (powder) materials. The algorithm is validated by testing on X-ray diffraction data sets obtained from real samples: a multi-mineral basalt rock at ambient conditions and products of the chemical reaction of yttrium and nitrogen in a laser-heated diamond anvil cell at 50 GPa. The high performance of the DAFi algorithm means it can be used for processing SC-XRD data online during experiments at synchrotron facilities.
|
|
| 7. |
- Barty, Anton, et al.
(författare)
-
Cheetah : software for high-throughput reduction and analysis of serial femtosecond X-ray diffraction data
- 2014
-
Ingår i: Journal of applied crystallography. - 0021-8898 .- 1600-5767. ; 47, s. 1118-1131
-
Tidskriftsartikel (refereegranskat)abstract
- The emerging technique of serial X-ray diffraction, in which diffraction data are collected from samples flowing across a pulsed X-ray source at repetition rates of 100 Hz or higher, has necessitated the development of new software in order to handle the large data volumes produced. Sorting of data according to different criteria and rapid filtering of events to retain only diffraction patterns of interest results in significant reductions in data volume, thereby simplifying subsequent data analysis and management tasks. Meanwhile the generation of reduced data in the form of virtual powder patterns, radial stacks, histograms and other meta data creates data set summaries for analysis and overall experiment evaluation. Rapid data reduction early in the analysis pipeline is proving to be an essential first step in serial imaging experiments, prompting the authors to make the tool described in this article available to the general community. Originally developed for experiments at X-ray free-electron lasers, the software is based on a modular facility-independent library to promote portability between different experiments and is available under version 3 or later of the GNU General Public License.
|
|
| 8. |
- Bellisario, Alfredo, et al.
(författare)
-
Noise reduction and mask removal neural network for X-ray single-particle imaging
- 2022
-
Ingår i: Journal of applied crystallography. - : International Union of Crystallography (IUCr). - 0021-8898 .- 1600-5767. ; 55, s. 122-132
-
Tidskriftsartikel (refereegranskat)abstract
- Free-electron lasers could enable X-ray imaging of single biological macro-molecules and the study of protein dynamics, paving the way for a powerful new imaging tool in structural biology, but a low signal-to-noise ratio and missing regions in the detectors, colloquially termed 'masks', affect data collection and hamper real-time evaluation of experimental data. In this article, the challenges posed by noise and masks are tackled by introducing a neural network pipeline that aims to restore diffraction intensities. For training and testing of the model, a data set of diffraction patterns was simulated from 10 900 different proteins with molecular weights within the range of 10-100 kDa and collected at a photon energy of 8 keV. The method is compared with a simple low-pass filtering algorithm based on autocorrelation constraints. The results show an improvement in the mean-squared error of roughly two orders of magnitude in the presence of masks compared with the noisy data. The algorithm was also tested at increasing mask width, leading to the conclusion that demasking can achieve good results when the mask is smaller than half of the central speckle of the pattern. The results highlight the competitiveness of this model for data processing and the feasibility of restoring diffraction intensities from unknown structures in real time using deep learning methods. Finally, an example is shown of this preprocessing making orientation recovery more reliable, especially for data sets containing very few patterns, using the expansion-maximization-compression algorithm.
|
|
| 9. |
- Bender, Philipp, et al.
(författare)
-
Shape-induced superstructure formation in concentrated ferrofluids under applied magnetic fields
- 2022
-
Ingår i: Journal of applied crystallography. - : INT UNION CRYSTALLOGRAPHY. - 0021-8898 .- 1600-5767. ; 55:6, s. 1613-1621
-
Tidskriftsartikel (refereegranskat)abstract
- The field-induced ordering of concentrated ferrofluids based on spherical and cuboidal maghemite nanoparticles is studied using small-angle neutron scattering, revealing a qualitative effect of the faceted shape on the interparticle interactions as shown in the structure factor and correlation lengths. Whereas a spatially disordered hard-sphere interaction potential with a short correlation length is found for similar to 9 nm spherical nanoparticles, nanocubes of a comparable particle size exhibit a more pronounced interparticle interaction and the formation of linear arrangements. Analysis of the anisotropic two-dimensional pair distance correlation function gives insight into the real-space arrangement of the nanoparticles. On the basis of the short interparticle distances found here, oriented attachment, i.e. a face-to-face arrangement of the nanocubes, is likely. The unusual field dependence of the interparticle correlations suggests a field-induced structural rearrangement.
|
|
| 10. |
- Bengtsson, Viktor E. G., 1989-, et al.
(författare)
-
Scipion-ED : a graphical user interface for batch processing and analysis of 3D ED/MicroED data
- 2022
-
Ingår i: Journal of applied crystallography. - : International Union of Crystallography (IUCr). - 0021-8898 .- 1600-5767. ; 55:3, s. 638-646
-
Tidskriftsartikel (refereegranskat)abstract
- Three-dimensional electron diffraction (3D ED)/microcrystal electron diffraction (MicroED) techniques are gaining in popularity. However, the data processing often does not fit existing graphical user interface software, instead requiring the use of the terminal or scripting. Scipion-ED, described in this article, provides a graphical user interface and extendable framework for processing of 3D ED/MicroED data. An illustrative project is described, in which multiple 3D ED/MicroED data sets collected on tetragonal lysozyme were processed with DIALS through the Scipion-ED interface. The ability to resolve unmodelled features in the electrostatic potential map was compared between three strategies for merging data sets.
|
|
| 11. |
- Bergenholtz, Johan, 1964, et al.
(författare)
-
Analysis of small-angle X-ray scattering data in the presence of significant instrumental smearing
- 2016
-
Ingår i: Journal of Applied Crystallography. - 0021-8898 .- 1600-5767. ; 49, s. 47-54
-
Tidskriftsartikel (refereegranskat)abstract
- A laboratory-scale small-angle X-ray scattering instrument with pinhole collimation has been used to assess smearing effects due to instrumental resolution. A new, numerically efficient method to smear ideal model intensities is developed and presented. It allows for directly using measured profiles of isotropic but otherwise arbitrary beams in smearing calculations. Samples of low-polydispersity polymer spheres have been used to show that scattering data can in this way be quantitatively modeled even when there is substantial distortion due to instrumental resolution.
|
|
| 12. |
- Bergfors, Terese, et al.
(författare)
-
Screening cells for crystals : a synergistic approach
- 2020
-
Ingår i: Journal of applied crystallography. - : International Union of Crystallography (IUCr). - 0021-8898 .- 1600-5767. ; 53, s. 1414-1415
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)
|
|
| 13. |
|
|
| 14. |
- Björck, Matts, et al.
(författare)
-
GenX : an extensible X-ray reflectivity refinement program utilizing differential evolution
- 2007
-
Ingår i: Journal of applied crystallography. - 0021-8898 .- 1600-5767. ; 40:6, s. 1174-1178
-
Tidskriftsartikel (refereegranskat)abstract
- GenX is a versatile program using the differential evolution algorithm for fitting X-ray and neutron reflectivity data. It utilizes the Parratt recursion formula for simulating specular reflectivity. The program is easily extensible, allowing users to incorporate their own models into the program. This can be useful for fitting data from other scattering experiments, or for any other minimization problem which has a large number of input parameters and/or contains many local minima, where the differential evolution algorithm is suitable. In addition, GenX manages to fit an arbitrary number of data sets simultaneously. The program is released under the GNU General Public License.
|
|
| 15. |
- Cerenius, Y., et al.
(författare)
-
Preliminary tests on the use of an acoustic levitator for liquid X-ray diffraction experiments
- 2003
-
Ingår i: Journal of applied crystallography. - : International Union of Crystallography (IUCr). - 0021-8898 .- 1600-5767. ; 36, s. 163-164
-
Tidskriftsartikel (refereegranskat)abstract
- Some preliminary tests at the crystallography beamline I711 at the MAX II synchrotron in Lund, Sweden, have shown that it is possible to use acoustical levitation to keep a droplet of liquid and solid (powder) samples in an X-ray beam for a sufficient time for collection of the X-ray diffraction pattern.
|
|
| 16. |
- Cichocka, Magdalena O., et al.
(författare)
-
High-throughput continuous rotation electron diffraction data acquisition via software automation
- 2018
-
Ingår i: Journal of applied crystallography. - 0021-8898 .- 1600-5767. ; 51:6, s. 1652-1661
-
Tidskriftsartikel (refereegranskat)abstract
- Single-crystal electron diffraction (SCED) is emerging as an effective technique to determine and refine the structures of unknown nano-sized crystals. In this work, the implementation of the continuous rotation electron diffraction (cRED) method for high-throughput data collection is described. This is achieved through dedicated software that controls the transmission electron microscope and the camera. Crystal tracking can be performed by defocusing every nth diffraction pattern while the crystal rotates, which addresses the problem of the crystal moving out of view of the selected area aperture during rotation. This has greatly increased the number of successful experiments with larger rotation ranges and turned cRED data collection into a high-throughput method. The experimental parameters are logged, and input files for data processing software are written automatically. This reduces the risk of human error, and makes data collection more reproducible and accessible for novice and irregular users. In addition, it is demonstrated how data from the recently developed serial electron diffraction technique can be used to supplement the cRED data collection by automatic screening for suitable crystals using a deep convolutional neural network that can identify promising crystals through the corresponding diffraction data. The screening routine and cRED data collection are demonstrated using a sample of the zeolite mordenite, and the quality of the cRED data is assessed on the basis of the refined crystal structure.
|
|
| 17. |
|
|
| 18. |
- Dawe, Louise N., et al.
(författare)
-
Teaching and Education highlighted
- 2022
-
Ingår i: Journal of applied crystallography. - : International Union of Crystallography (IUCr). - 0021-8898 .- 1600-5767. ; 55, s. 215-217
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)
|
|
| 19. |
- Droulias, Sotirios A., et al.
(författare)
-
Limitations of the kinematic approximation in neutron reflectivity measurements for the analysis of bilayers
- 2018
-
Ingår i: Journal of applied crystallography. - : INT UNION CRYSTALLOGRAPHY. - 0021-8898 .- 1600-5767. ; 51, s. 1556-1563
-
Tidskriftsartikel (refereegranskat)abstract
- The limitations of a phenomenological fitting approach compared to simulations of the optical model including reflection and refraction at all interfaces are demonstrated using the example of hydrogen loading in ultra-thin vanadium layers. Fe/V superlattices are loaded with deuterium and the lattice expansion and deuterium concentration are extracted from neutron reflectivity data. A noticeable difference is found between the extraction of concentrations and bilayer thicknesses directly from the superlattice peaks and fits of the density profile using the Parratt formalism. The results underline the importance of carefully considering the limitations of phenomenological approaches, in order to obtain robust results. The limitations of the kinematic approximation for the analysis are discussed in detail.
|
|
| 20. |
|
|
| 21. |
- Glavic, Artur, et al.
(författare)
-
GenX 3 : the latest generation of an established tool
- 2022
-
Ingår i: Journal of applied crystallography. - : International Union of Crystallography (IUCr). - 0021-8898 .- 1600-5767. ; 55, s. 1063-1071
-
Tidskriftsartikel (refereegranskat)abstract
- Since its publication more than 15 years ago the GenX software has been continuously developed and has established itself as a standard package for analyzing X-ray and neutron reflectometry data. The evolution of the software during the last two major revisions is reported here. This includes a simplified model builder for beginners, simple samples, additional sample models, statistical error analysis and the use of just-in-time compilation modules for the reflectometry kernel to achieve higher performance. In addition, the influence of experimental errors on the reflectivity curve is discussed, and new features are described that allow the user to include these in the error statistics to improve the fitting and uncertainty estimation.
|
|
| 22. |
- Gruene, Tim, et al.
(författare)
-
CELLOPT : improved unit-cell parameters for electron diffraction data of small-molecule crystals
- 2022
-
Ingår i: Journal of applied crystallography. - 0021-8898 .- 1600-5767. ; 55, s. 647-655
-
Tidskriftsartikel (refereegranskat)abstract
- Electron diffraction enables structure determination of organic small molecules using crystals that are too small for conventional X-ray crystallography. However, because of uncertainties in the experimental parameters, notably the detector distance, the unit-cell parameters and the geometry of the structural models are typically less accurate and precise compared with results obtained by X-ray diffraction. Here, an iterative procedure to optimize the unit-cell parameters obtained from electron diffraction using idealized restraints is proposed. The cell optimization routine has been implemented as part of the structure refinement, and a gradual improvement in lattice parameters and data quality is demonstrated. It is shown that cell optimization, optionally combined with geometrical corrections for any apparent detector distortions, benefits refinement of electron diffraction data in small-molecule crystallography and leads to more accurate structural models.
|
|
| 23. |
|
|
| 24. |
- Han, Huijong, et al.
(författare)
-
The XBI BioLab for life science experiments at the European XFEL
- 2021
-
Ingår i: Journal of applied crystallography. - 0021-8898 .- 1600-5767. ; 54, s. 7-21
-
Tidskriftsartikel (refereegranskat)abstract
- The science of X-ray free-electron lasers (XFELs) critically depends on the performance of the X-ray laser and on the quality of the samples placed into the X-ray beam. The stability of biological samples is limited and key biomolecular transformations occur on short timescales. Experiments in biology require a support laboratory in the immediate vicinity of the beamlines. The XBI BioLab of the European XFEL (XBI denotes XFEL Biology Infrastructure) is an integrated user facility connected to the beamlines for supporting a wide range of biological experiments. The laboratory was financed and built by a collaboration between the European XFEL and the XBI User Consortium, whose members come from Finland, Germany, the Slovak Republic, Sweden and the USA, with observers from Denmark and the Russian Federation. Arranged around a central wet laboratory, the XBI BioLab provides facilities for sample preparation and scoring, laboratories for growing prokaryotic and eukaryotic cells, a Bio Safety Level 2 laboratory, sample purification and characterization facilities, a crystallization laboratory, an anaerobic laboratory, an aerosol laboratory, a vacuum laboratory for injector tests, and laboratories for optical microscopy, atomic force microscopy and electron microscopy. Here, an overview of the XBI facility is given and some of the results of the first user experiments are highlighted.
|
|
| 25. |
- Hantke, Max F., et al.
(författare)
-
Condor : a simulation tool for flash X-ray imaging
- 2016
-
Ingår i: Journal of applied crystallography. - 0021-8898 .- 1600-5767. ; 49, s. 1356-1362
-
Forskningsöversikt (refereegranskat)abstract
- Flash X-ray imaging has the potential to determine structures down to molecular resolution without the need for crystallization. The ability to accurately predict the diffraction signal and to identify the optimal experimental configuration within the limits of the instrument is important for successful data collection. This article introduces Condor, an open-source simulation tool to predict X-ray far-field scattering amplitudes of isolated particles for customized experimental designs and samples, which the user defines by an atomic or a refractive index model. The software enables researchers to test whether their envisaged imaging experiment is feasible, and to optimize critical parameters for reaching the best possible result. It also aims to support researchers who intend to create or advance reconstruction algorithms by simulating realistic test data. Condor is designed to be easy to use and can be either installed as a Python package or used from its web interface (http://lmb.icm.uu.se/condor). X-ray free-electron lasers have high running costs and beam time at these facilities is precious. Data quality can be substantially improved by using simulations to guide the experimental design and simplify data analysis.
|
|
