| 1. |
- Cai, C. S., et al.
(författare)
-
Polymer solar cells spray coated with non-halogenated solvents
- 2017
-
Ingår i: Solar Energy Materials and Solar Cells. - : Elsevier BV. - 0927-0248. ; 161, s. 52-61
-
Tidskriftsartikel (refereegranskat)abstract
- Using spray-coating technique, we successfully fabricated conventional ITO-based and inverted ITO-free polymer solar cells (PSCs) based on a conjugated polymer poly[2,3-bis-(3-octyloxyphenyl) quinoxaline-5,8-diyl-alt-thiophene-2,5-diyl] (TQ1) as the donor and [6,6]-phenyl-C61-butyric acid methyl ester (PC61BM) or [6,6] -phenyl-C71-butyric acid methyl ester (PC71BM) as the acceptor. Environment-friendly non-halogenated solvents were used to process the active layers. The influence of substrate temperatures and processing solvents on the photovoltaic performance of the ITO-based TQ1:PC61BM PSCs was systemically investigated. A higher substrate temperature can accelerate the solvent evaporating rate and afford a micro-textured rougher surface, which efficiently reduced light reflectance and enhanced absorption. Furthermore, finer phase separation was observed when using this high substrate temperature, which led to enhanced photocurrent due to the reduced bimolecular recombination. The device performance of spray-processed PSCs using the non-halogenated solvent mixtures was comparable to that of spray-processed PSCs using the halogenated o-dichlorobenzene (oDCB), which demonstrates that the non-halogenated solvents are very promising in spray-processed PSCs. This work sheds new light on developing efficient roll-to-roll compatible spray-coated PSCs with environment-friendly solvents.
|
|
| 2. |
- Chen, Qiaonan, 1992, et al.
(författare)
-
Effects of Flexible Conjugation-Break Spacers of Non-Conjugated Polymer Acceptors on Photovoltaic and Mechanical Properties of All-Polymer Solar Cells
- 2022
-
Ingår i: Nano-Micro Letters. - : Springer Science and Business Media LLC. - 2311-6706 .- 2150-5551. ; 14:1
-
Tidskriftsartikel (refereegranskat)abstract
- Highlights: A series of non-conjugated acceptor polymers with flexible conjugation-break spacers (FCBSs) of different lengths were synthesized.The effect of FCBSs length on solubility of the acceptor polymers, and their photovoltaic and mechanical properties in all-polymer solar cells were explored.This work provides useful guidelines for the design of semiconducting polymers by introducing FCBS with proper length, which can giantly improved properties that are not possible to be achieved by the state-of-the-art fully conjugated polymers. Abstract: All-polymer solar cells (all-PSCs) possess attractive merits including superior thermal stability and mechanical flexibility for large-area roll-to-roll processing. Introducing flexible conjugation-break spacers (FCBSs) into backbones of polymer donor (PD) or polymer acceptor (PA) has been demonstrated as an efficient approach to enhance both the photovoltaic (PV) and mechanical properties of the all-PSCs. However, length dependency of FCBS on certain all-PSC related properties has not been systematically explored. In this regard, we report a series of new non-conjugated PAs by incorporating FCBS with various lengths (2, 4, and 8 carbon atoms in thioalkyl segments). Unlike common studies on so-called side-chain engineering, where longer side chains would lead to better solubility of those resulting polymers, in this work, we observe that the solubilities and the resulting photovoltaic/mechanical properties are optimized by a proper FCBS length (i.e., C2) in PA named PYTS-C2. Its all-PSC achieves a high efficiency of 11.37%, and excellent mechanical robustness with a crack onset strain of 12.39%, significantly superior to those of the other PAs. These results firstly demonstrate the effects of FCBS lengths on the PV performance and mechanical properties of the all-PSCs, providing an effective strategy to fine-tune the structures of PAs for highly efficient and mechanically robust PSCs.[Figure not available: see fulltext.]
|
|
| 3. |
- Chen, Zhan, et al.
(författare)
-
Photoluminescence Enhancement for Efficient Mixed-Halide Blue Perovskite Light-Emitting Diodes
- 2023
-
Ingår i: Advanced Optical Materials. - : WILEY-V C H VERLAG GMBH. - 2162-7568 .- 2195-1071. ; 11:6
-
Tidskriftsartikel (refereegranskat)abstract
- The development of highly efficient blue perovskite light-emitting diodes (PeLEDs) remains a big challenge, requiring more fundamental investigations. In this work, significant photoluminescence enhancement in mixed halide blue perovskite films is demonstrated by using a molecule, benzylphosphonic acid, which eventually doubles the external quantum efficiency to 6.3% in sky-blue PeLEDs. The photoluminescence enhancement is achieved by forming an oxide-bonded perovskite surface at grain boundaries and suppressing electron-phonon interaction, which enhances the radiative recombination rate and reduces the nonradiative recombination rate, respectively. Moreover, severe thermal quenching is observed in the blue perovskite films, which can be explained by a two-step mechanism involving exciton dissociation and electron-phonon interaction. The results suggest that enhancing the radiative recombination rate and reducing the electron-phonon interaction-induced nonradiative recombination rate are crucial for achieving blue perovskite films with strong emission at or above room temperature.
|
|
| 4. |
- Fan, Qunping, et al.
(författare)
-
10.13% Efficiency All-Polymer Solar Cells Enabled by Improving the Optical Absorption of Polymer Acceptors
- 2020
-
Ingår i: Solar RRL. - : Wiley. - 2367-198X. ; 4:6
-
Tidskriftsartikel (refereegranskat)abstract
- The limited light absorption capacity for most polymer acceptors hinders the improvement of the power conversion efficiency (PCE) of all-polymer solar cells (all-PSCs). Herein, by simultaneously increasing the conjugation of the acceptor unit and enhancing the electron-donating ability of the donor unit, a novel narrow-bandgap polymer acceptor PF3-DTCO based on an A–D–A-structured acceptor unit ITIC16 and a carbon–oxygen (C–O)-bridged donor unit DTCO is developed. The extended conjugation of the acceptor units from IDIC16 to ITIC16 results in a red-shifted absorption spectrum and improved absorption coefficient without significant reduction of the lowest unoccupied molecular orbital energy level. Moreover, in addition to further broadening the absorption spectrum by the enhanced intramolecular charge transfer effect, the introduction of C–O bridges into the donor unit improves the absorption coefficient and electron mobility, as well as optimizes the morphology and molecular order of active layers. As a result, the PF3-DTCO achieves a higher PCE of 10.13% with a higher short-circuit current density (Jsc) of 15.75 mA cm−2 in all-PSCs compared with its original polymer acceptor PF2-DTC (PCE = 8.95% and Jsc = 13.82 mA cm−2). Herein, a promising method is provided to construct high-performance polymer acceptors with excellent optical absorption for efficient all-PSCs.
|
|
| 5. |
- Fan, Qunping, 1989, et al.
(författare)
-
A Non-Conjugated Polymer Acceptor for Efficient and Thermally Stable All-Polymer Solar Cells
- 2020
-
Ingår i: Angewandte Chemie - International Edition. - : Wiley. - 1433-7851 .- 1521-3773. ; 59:45, s. 19835-19840
-
Tidskriftsartikel (refereegranskat)abstract
- A non-conjugated polymer acceptor PF1-TS4 was firstly synthesized by embedding a thioalkyl segment in the mainchain, which shows excellent photophysical properties on par with a fully conjugated polymer, with a low optical band gap of 1.58 eV and a high absorption coefficient >105 cm−1, a high LUMO level of −3.89 eV, and suitable crystallinity. Matched with the polymer donor PM6, the PF1-TS4-based all-PSC achieved a power conversion efficiency (PCE) of 8.63 %, which is ≈45 % higher than that of a device based on the small molecule acceptor counterpart IDIC16. Moreover, the PF1-TS4-based all-PSC has good thermal stability with ≈70 % of its initial PCE retained after being stored at 85 °C for 180 h, while the IDIC16-based device only retained ≈50 % of its initial PCE when stored at 85 °C for only 18 h. Our work provides a new strategy to develop efficient polymer acceptor materials by linkage of conjugated units with non-conjugated thioalkyl segments.
|
|
| 6. |
- Fan, Qunping, 1989, et al.
(författare)
-
High-performance all-polymer solar cells enabled by a novel low bandgap non-fully conjugated polymer acceptor
- 2021
-
Ingår i: Science in China Series B. - : Springer Nature. - 1674-7291 .- 1869-1870. ; 64, s. 1380-1388
-
Tidskriftsartikel (refereegranskat)abstract
- Anon-fully conjugated polymer as a new class of acceptor materials has shown some advantages over its small molecular counterpart when used in photoactive layers for all-polymer solar cells (all-PSCs), despite a low power conversion efficiency (PCE) caused by its narrow absorption spectra. Herein, a novel non-fully conjugated polymer acceptor PFY-2TS with a low bandgap of similar to 1.40 eV was developed, via polymerizing a large pi-fused small molecule acceptor (SMA) building block (namely YBO) with a non-conjugated thioalkyl linkage. Compared with its precursor YBO, PFY-2TS retains a similar low bandgap but a higher LUMO level. Moreover, compared with the structural analog of YBO-based fully conjugated polymer acceptor PFY-DTC, PFY-2TS shows similar absorption spectrum and electron mobility, but significantly different molecular crystallinity and aggregation properties, which results in optimal blend morphology with a polymer donor PBDB-T and better device physical processes in all-PSCs. As a result, PFY-2TS-based all-PSCs achieved a PCE of 12.31% with a small energy loss of 0.56 eV enabled by the reduced non-radiative energy loss (0.24 eV), which is better than that of 11.08% for the PFY-DTC-based ones. Our work clearly demonstrated that non-fully conjugated polymers as a new class of acceptor materials are very promising for the development of high-performance all-PSCs.
|
|
| 7. |
- Fan, Qunping, 1989, et al.
(författare)
-
Mechanically Robust All-Polymer Solar Cells from Narrow Band Gap Acceptors with Hetero-Bridging Atoms
- 2020
-
Ingår i: Joule. - : Elsevier BV. - 2542-4351. ; 4:3, s. 658-672
-
Tidskriftsartikel (refereegranskat)abstract
- We developed three narrow band-gap polymer acceptors PF2-DTC, PF2-DTSi, and PF2-DTGe with different bridging atoms (i.e., C, Si, and Ge). Studies found that such different bridging atoms significantly affect the crystallinity, extinction coefficient, electron mobility of the polymer acceptors, and the morphology and mechanical robustness of related active layers. In all-polymer solar cells (all-PSCs), these polymer acceptors achieved high power conversion efficiencies (PCEs) over 8.0%, while PF2-DTSi obtained the highest PCE of 10.77% due to its improved exciton dissociation, charge transport, and optimized morphology. Moreover, the PF2-DTSi-based active layer showed excellent mechanical robustness with a high toughness value of 9.3 MJ m−3 and a large elongation at a break of 8.6%, which is a great advantage for the practical applications of flexible devices. As a result, the PF2-DTSi-based flexible all-PSC retained >90% of its initial PCE (6.37%) after bending and relaxing 1,200 times at a bending radius of ∼4 mm.
|
|
| 8. |
- Fan, Qunping, 1989, et al.
(författare)
-
Over 14% efficiency all-polymer solar cells enabled by a low bandgap polymer acceptor with low energy loss and efficient charge separation
- 2020
-
Ingår i: Energy & Environmental Science. - : Royal Society of Chemistry. - 1754-5692 .- 1754-5706. ; 13:12, s. 5017-5027
-
Tidskriftsartikel (refereegranskat)abstract
- Obtaining both high open-circuit voltage (V-oc) and short-circuit current density (J(sc)) has been a major challenge for efficient all-polymer solar cells (all-PSCs). Herein, we developed a polymer acceptor PF5-Y5 with excellent optical absorption capability (onset extending to similar to 880 nm and maximum absorption coefficient exceeding 105 cm(-1) in a film), high electron mobility (3.18 x 10(3) cm(2) V-1 s(-1)) and high LUMO level (-3.84 eV) to address such a challenge. As a result, the PBDB-T:PF5-Y5-based all-PSCs achieved a high power conversion efficiency of up to 14.45% with both a high Voc (0.946 V) and a high Jsc (20.65 mA cm(-2)), due to the high and broad absorption coverage, small energy loss (0.57 eV) and efficient charge separation and transport in the device, which are among the best values in the all-PSC field. In addition, the all-PSC shows a similar to 15% improvement in PCE compared to its counterpart small molecule acceptor (Y5)-based device. Our results suggest that PF5-Y5 is a very promising polymer acceptor candidate for applications in efficient all-PSCs.
|
|
| 9. |
- Fan, Qunping, 1989, et al.
(författare)
-
Weak Makes It Powerful: The Role of Cognate Small Molecules as an Alloy Donor in 2D/1A Ternary Fullerene Solar Cells for Finely Tuned Hierarchical Morphology in Thick Active Layers
- 2020
-
Ingår i: Small Methods. - : Wiley. - 2366-9608. ; 4:3
-
Tidskriftsartikel (refereegranskat)abstract
- Herein, a novel small molecule donor is first developed, FSM6, which is a cognate molecule to BTR possessing similar molecular structure with comparable optical absorption but different crystallinity. The efficient fullerene-type ternary small molecular solar cells (SMSCs) based on an alloy donor of BTR and FSM6 in a thick film of 250 nm reveal the improved hierarchical phase separation morphology and molecular structural order of ternary active layers with improved crystallinity of the key donor component BTR. Furthermore, FSM6 as the key third component also plays a role of charge transfer accelerator in ternary SMSCs. As a result, the optimal ternary SMSCs based on BTR:FSM6:PC71BM achieve a high power conversion efficiency (PCE) up to 10.21% with the synergistically improved open-circuit voltage of 0.950 V, short-circuit current density of 13.85 mA cm(-2), and fill factor of 77.6%, in comparison with either the binary SMSCs of BTR:PC71BM (PCE = 9.37%) or FSM6:PC71BM (PCE = 8.00%). This work provides a promising methodology to optimize device morphology for high-performance ternary SMSCs by combining two cognate small molecules with similar absorption spectra but different crystallinity as an alloy donor.
|
|
| 10. |
- Hou, Lintao, et al.
(författare)
-
Lateral Phase Separation Gradients in Spin-Coated Thin Films of High-Performance Polymer: Fullerene Photovoltaic Blends
- 2011
-
Ingår i: Advanced Functional Materials. - : Wiley. - 1616-3028 .- 1616-301X. ; 21:16, s. 3169-3175
-
Tidskriftsartikel (refereegranskat)abstract
- In this study, it is demonstrated that a finer nanostructure produced under a rapid rate of solvent removal significantly improves charge separation in a high-performance polymer: fullerene bulk-heterojunction blend. During spin-coating, variations in solvent evaporation rate give rise to lateral phase separation gradients with the degree of coarseness decreasing away from the center of rotation. As a result, across spin-coated thin films the photocurrent at the first interference maximum varies as much as 25%, which is much larger than any optical effect. This is investigated by combining information on the surface morphology of the active layer imaged by atomic force microscopy, the 3D nanostructure imaged by electron tomography, film formation during the spin coating process imaged by optical interference and photocurrent generation distribution in devices imaged by a scanning light pulse technique. The observation that the nanostructure of organic photovoltaic blends can strongly vary across spin-coated thin films will aid the design of solvent mixtures suitable for high molecular-weight polymers and of coating techniques amenable to large area processing.
|
|
| 11. |
- Jiang, Jianxia, et al.
(författare)
-
Colorless-to-colorful switching of electrochromic MXene by reversible ion insertion
- 2022
-
Ingår i: Nano Reseach. - : Tsinghua University Press. - 1998-0124 .- 1998-0000. ; 15:4, s. 3587-3593
-
Tidskriftsartikel (refereegranskat)abstract
- Electrochromic (EC) materials that change color with voltage have been widely studied for use in dynamic windows. However, colorless-to-colorful switching with high contrast ratio is generically unattainable, especially for colorless-to-black electrochromic materials with an ultrahigh contrast ratio over the entire visible region. In this work, we developed Nb1.33C MXene-based dynamic windows with colorless-to-black switching of up to 75% reversible change in transmittance from 300 to 1,500 nm. By exploring the electrochromic effects of different electrolytes through in situ optical changes and electrochemical quartz crystal microbalance (EQCM), it is found that electrochromic behavior is greatly influenced by the extent of reversible Li+ insertion/deinsertion between the two-dimensional Nb1.33C MXene nanosheets. In addition, a colorless-to-black EC device based on Nb1.33C with an overall integrated contrast ratio over 80% was successfully constructed by a solution-processable spin coating method. This work enables a simple route to fabricate MXene-based high-performance electrochromic smart windows, which is important for further expanding the application of MXenes to optoelectronic and photonic applications.
|
|
| 12. |
- Li, Yaohui, et al.
(författare)
-
An n-n Heterojunction Configuration for Efficient Electron Transport in Organic Photovoltaic Devices
- 2023
-
Ingår i: Advanced Functional Materials. - : WILEY-V C H VERLAG GMBH. - 1616-301X .- 1616-3028. ; 33:9
-
Tidskriftsartikel (refereegranskat)abstract
- Selective electron transport and extraction are essential to the operation of photovoltaic devices. Electron transport layer (ETL) is therefore critical to organic photovoltaics (OPV). Herein, an ETL configuration is presented comprising a solution-processed n-n organic heterojunction to enhance electron transport and hole blocking, and boost power conversion efficiency (PCE) in OPV. Specifically, the n-n heterojunction is constructed by stacking a narrow-band n-type conjugated polymer layer (PNDIT-F3N) and a wide-band n-type conjugated molecule layer (Phen-NaDPO). Based on the ultraviolet photoelectron spectroscopy measurement and numerical simulation of current density-voltage characteristics, the formation of the built-in potential is investigated. In three OPVs with different active layers, substantial improvements are observed in performance following the introduction of this ETL configuration. The performance enhancement arises from the combination of selective carrier transport properties and reduced recombination. Another contributing factor is the good film-forming quality of the new ETL configuration, where the surface energies of the related materials are well-matched. The n-n organic heterojunction represents a viable and promising ETL construction strategy for efficient OPV devices.
|
|
| 13. |
- Li, Yaohui, et al.
(författare)
-
Improved efficiency of organic solar cell using MoS2 doped poly (3,4-ethylenedioxythiophene)(PEDOT) as hole transport layer
- 2022
-
Ingår i: Applied Surface Science. - : ELSEVIER. - 0169-4332 .- 1873-5584. ; 590
-
Tidskriftsartikel (refereegranskat)abstract
- We report an efficient hole transporting layer (HTL) for organic solar cell (OSC) based on solution-processed organic-inorganic hybrid composed of ultrasonic-exfoliated MoS2 nanosheets and dopamine-copolymerized poly(3,4-ethylenedioxythiophene) (PEDOT) derivative (DA-P). The OSCs based on this new hybrid HTL show a marked performance improvement over those with single-component HTLs, and they retain up to 80% of their original power conversion efficiency after 35 days. Our investigations reveal that the boost in performance is due to a synergistic effect that improves both hole transport and extraction ability. This effect is mainly due to the doping of exfoliated-MoS2 nanosheets on DA-P. We employ a comprehensive range of spectroscopies to uncover that the dopant is derived from the oxidation products of MoS2 nanosheets during the ultrasonic exfoliation. Our work demonstrates an efficient hybrid HTL and offers new insights into the interaction of exfoliated-MoS2 nanosheets and the PEDOT derivatives.
|
|
| 14. |
- Lin, Y. B., et al.
(författare)
-
Energy-effectively printed all-polymer solar cells exceeding 8.61% efficiency
- 2018
-
Ingår i: Nano Energy. - : Elsevier BV. - 2211-2855. ; 46, s. 428-435
-
Tidskriftsartikel (refereegranskat)abstract
- All-polymer solar cells (all-PSCs) have attracted tremendous attention in the past few years due to their unique advantages. However, up to now most of high-efficiency all-PSCs are processed by spin-coating with complicated post treatment processes, which is ill-suited to a large-area roll-to-roll (R2R) technique. In this work, high-efficiency all-PSCs based on PTB7-Th and PNDI-T10 are achieved by one of R2R compatible printing techniques, i.e. doctor-blading, without any annealing treatment. It was found that incorporating an additive into all polymer blends solution can prolong the drying time of all polymer nanocomposites from 120 to 1000 s to form a better bulk heterojunction morphology and a higher crystallinity, which thus reduce charge recombination and show much better electrical impedance spectroscopy parameters. Record-breaking power conversion efficiencies (PCEs) of 8.61% and high fill factors (FF) of 0.71 are achieved by doctor-blading under an extremely process-simple and energy-effective conditions. Moreover, large-area (2.03 cm 2 ) flexible ITO-free all-PSCs by doctor-blading with record-breaking PCEs of 6.65% and FF of 0.65 are realized, which are much higher than conventional fullerene-based ones under the same condition, demonstrating that all-PSCs are more suitable for the flexible device structure and have a bright future towards practical application with R2R manufacture.
|
|
| 15. |
- Lin, Y. B., et al.
(författare)
-
Study of ITO-free roll-to-roll compatible polymer solar cells using the one-step doctor blading technique
- 2017
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry (RSC). - 2050-7488 .- 2050-7496. ; 5:8, s. 4093-4102
-
Tidskriftsartikel (refereegranskat)abstract
- Extremely simple one-step coating ITO-free inverted polymer solar cells (IFIPSCs) have been fabricated using a novel film deposition method-doctor blading technique, which is completely compatible with roll-to-roll (R2R) manufacturing. Delamination of the interfacial buffer layer (IBL) from the photoactive mixtures is achieved via a spontaneous vertical self-assembly. The performance of one-step doctor-blading IFIPSCs is primarily influenced by the inherent IBL stratification purity rather than the fine donor/acceptor phase separation for the rigid backbone PTB7 system, which is significantly different from that of the conventional two-step doctor blading devices. The surface energy results strongly demonstrate that the formation of the interfacial layer between the ITO-free cathode and the photoactive layer is significantly controlled by the solvent drying time, which determines the self-assembly quality and can be greatly manipulated from 2700 to 1200 s by different substrate temperatures. It's worth noting that the pure interfacial layer formed at low substrate temperatures improves charge separation and transport, whereas high substrate temperatures limit its growth, leading to the decrease of device performance. The detailed relationship between the self-assembly interfacial layer and the internal resistance and capacitance is revealed by impedance spectroscopy. Encouraging power conversion efficiency (PCE) of 6.56% is achieved from simple one-step doctor-blading ITO-free devices at a very low substrate temperature of 25 degrees C, which is energy saving and appropriate for industrialized R2R production. In contrast, the highest PCE of 7.11% ever reported for two-step doctor-blading ITO-free IFIPSCs was obtained at a high substrate temperature of 60 degrees C for achieving a fine morphology without regard to the vertical delamination. Furthermore, for crystalline polymer systems like P3TI with a semiflexible chain, it requires a higher substrate temperature of 40 degrees C to mediate the balance of vertical selfassembly stratification of the interfacial buffer layer and photoactive morphology to maximize the device performance.
|
|
| 16. |
- Lin, Yuanbao, et al.
(författare)
-
One-Step Blade-Coated Highly Efficient Nonfullerene Organic Solar Cells with a Self-Assembled Interfacial Layer Enabled by Solvent Vapor Annealing
- 2019
-
Ingår i: Solar RRL. - : Wiley. - 2367-198X. ; 3:8
-
Tidskriftsartikel (refereegranskat)abstract
- A pronounced enhancement of the power conversion efficiency (PCE) by 38% is achieved in one-step doctor-blade printing organic solar cells (OSCs) via a simple solvent vapor annealing (SVA) step. The organic blend composed of a donor polymer, a nonfullerene acceptor, and an interfacial layer (IL) molecular component is found to phase-separate vertically when exposed to a solvent vapor-saturated atmosphere. Remarkably, the spontaneous formation of a fine, self-organized IL between the bulk heterojunction (BHJ) layer and the indium tin oxide (ITO) electrode facilitated by SVA yields solar cells with a significantly higher PCE (11.14%) than in control devices (8.05%) without SVA and in devices (10.06%) made with the more complex two-step doctor-blade printing method. The stratified nature of the ITO/IL/BHJ/cathode is corroborated by a range of complementary characterization techniques including surface energy, cross-sectional scanning electron microscopy, grazing incidence wide angle X-ray scattering, and X-ray photoelectron spectroscopy. This study demonstrates that a spontaneously formed IL with SVA treatment combines simplicity and precision with high device performance, thus making it attractive for large-area manufacturing of next-generation OSCs.
|
|
| 17. |
- Lin, Yuanbao, et al.
(författare)
-
Printed Nonfullerene Organic Solar Cells with the Highest Efficiency of 9.5%
- 2018
-
Ingår i: Advanced Energy Materials. - : WILEY-V C H VERLAG GMBH. - 1614-6832 .- 1614-6840. ; 8:13
-
Tidskriftsartikel (refereegranskat)abstract
- The current work reports a high power conversion efficiency (PCE) of 9.54% achieved with nonfullerene organic solar cells (OSCs) based on PTB7-Th donor and 3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)-indanone))-5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3-d:2,3-d]-s-indaceno[1,2-b:5,6-b]dithiophene) (ITIC) acceptor fabricated by doctor-blade printing, which has the highest efficiency ever reported in printed nonfullerene OSCs. Furthermore, a high PCE of 7.6% is realized in flexible large-area (2.03 cm(2)) indium tin oxide (ITO)-free doctor-bladed nonfullerene OSCs, which is higher than that (5.86%) of the spin-coated counterpart. To understand the mechanism of the performance enhancement with doctor-blade printing, the morphology, crystallinity, charge recombination, and transport of the active layers are investigated. These results suggest that the good performance of the doctor-blade OSCs is attributed to a favorable nanoscale phase separation by incorporating 0.6 vol% of 1,8-diiodooctane that prolongs the dynamic drying time of the doctor-bladed active layer and contributes to the migration of ITIC molecules in the drying process. High PCE obtained in the flexible large-area ITO-free doctor-bladed nonfullerene OSCs indicates the feasibility of doctor-blade printing in large-scale fullerene-free OSC manufacturing. For the first time, the open-circuit voltage is increased by 0.1 V when 1 vol% solvent additive is added, due to the vertical segregation of ITIC molecules during solvent evaporation.
|
|
| 18. |
- Liu, Alei, et al.
(författare)
-
Manipulate Micrometer Surface and Nanometer Bulk Phase Separation Structures in the Active Layer of Organic Solar Cells via Synergy of Ultrasonic and High-Pressure Gas Spraying
- 2019
-
Ingår i: ACS Applied Materials and Interfaces. - : AMER CHEMICAL SOC. - 1944-8244 .- 1944-8252. ; 11:11, s. 10777-10784
-
Tidskriftsartikel (refereegranskat)abstract
- For organic solar cells, the vertical and lateral micro-/nanometer-scale structure in the active layer largely determines the device performance. In this work, the surface and bulk domain size of the photoactive layer are successfully manipulated with a facile two-step spraying method, that is, an ultrathin active layer by high-pressure spraying is deliberately stacked on top of the thick active layer by ultrasonic spraying. Thus, the morphology is effectively optimized with the comprehensive study of optical and electrical characteristics, such as photon absorption, exciton dissociation efficiency, and bimolecular recombination. Moreover, the novel method can be used not only in the fullerene system but also in the nonfullerene system, demonstrating the remarkable universality through this synergy method. This work provides an easy and reliable strategy to improve photovoltaic device performance in the industrial large-area spray-coating process.
|
|
| 19. |
- Luo, Xuhao, et al.
(författare)
-
Intrinsic polarization-sensitive organic photodetector with self-assembled all-polymer heterojunction
- 2022
-
Ingår i: Applied Physics Letters. - : AIP Publishing. - 0003-6951 .- 1077-3118. ; 121:23
-
Tidskriftsartikel (refereegranskat)abstract
- Intrinsic polarization-sensitive photodetectors (IPPDs) have attracted considerable attention in recent years due to their simplicity in configuration, making them ideal candidates for compact and integrated polarization-sensitive sensing and imaging systems. Photoactive films with intrinsic optical anisotropy are necessary for IPPDs. This study reports an achievement of photoactive films based on all-polymer heterojunction films with in-plane optical anisotropy using a simple bottom-up self-assembly method. Both the donor (TQ1) and acceptor (N2200) polymers have the same spatial orientation with distinct anisotropy, approaching a dichroic ratio (DR) of 8. Polarization-sensitive light absorption is due to the uniaxially oriented polymer chains, which are dominated by lamellar packing with edge-on orientation. For IPPDs based on this anisotropic all-polymer heterojunction film, a photocurrent anisotropy was found with a polarized photocurrent ratio of 2.6. The detectivity of these IPPDs was found to be 1.9 × 1011 Jones (@ ∼600 nm, 0 V bias). Our work shows that oriented polymer donor-acceptor films fabricated using bottom-up self-assembly have great potential in applications, such as polarization detection.
|
|
| 20. |
- Peng, Zuosheng, et al.
(författare)
-
A dual ternary system for highly efficient ITO-free inverted polymer solar cells
- 2015
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry. - 2050-7488 .- 2050-7496. ; 3:36, s. 18365-18371
-
Tidskriftsartikel (refereegranskat)abstract
- In this study, it has been found that a very fine nanostructure can be realized by mixing 1-chloronaphthalene (CN) - a high-boiling solvent into a binary chlorobenzene (CB) : 1,8-diiodooctane (DIO) solvent mixture to form a ternary solvent system. An improvement in energy level alignment is also obtained by doping ICBA into a binary PTB7 : PCBM[70] blend, whereby the ternary solute system provides a new pathway for charge transfer from PTB7 to the PCBM[ 70] : ICBA alloy. This is confirmed by imaging the surface morphology of the active layer using AFM and TEM, monitoring the transient film formation process and measuring the charge transfer states with Fourier transform photocurrent spectroscopy. An encouraging PCE of 7.65% is achieved from the dual ternary system, which is the highest value ever reported for an ITO-free inverted polymer solar cell with a PEDOT:PSS layer as the top semitransparent electrode - a system which is compatible with low-cost large-area roll-to-roll manufacturing.
|
|
| 21. |
- Peng, Zuosheng, et al.
(författare)
-
One-step coating inverted polymer solar cells using a conjugated polymer as an electron extraction additive
- 2015
-
Ingår i: Journal of Materials Chemistry A. - : ROYAL SOC CHEMISTRY. - 2050-7488 .- 2050-7496. ; 3:41, s. 20500-20507
-
Tidskriftsartikel (refereegranskat)abstract
- We report a facile technique of blending a conjugated polymer thieno[3,4-b]thiophene/benzodithiophene (PTB7):[6,6]-phenyl-C71-butyric acid methyl ester (PCBM[70]) active materials with a conjugated interfacial modification polymer poly[(9,9-bis(3-(N,N-dimethylamino)propyl)-2,7-fluorene)-alt-2,7-(9,9-dioctylfluorene)] (PFN) to simplify the coating process and improve the bulk heterojunction (BHJ) polymer solar cell (PSC) performance. The reason for and result of PFN self-organization via a spontaneous vertical delamination onto the ITO surface were investigated by charge transfer state, optical modelling based on transfer matrix formalism, surface energy measurement, scanning Kelvin probe force microscopy and impedance spectroscopy analysis in conjunction with atomic force microscopy and scanning electron microscopy. The relaxed charge transfer state demonstrates that PFN doping has a negligible impact on the donor: acceptor heterojunction interface. The optical simulation of device structures indicates that doping PFN into a BHJ has nearly no influence on the photon absorption profile of the active layer. Very encouraging device performance was achieved in the one-step coating PFN: BHJ PSC with ITO as the cathode, which is comparable to that of the two-step coating PSC. Moreover, for ITO-free inverted PSCs with PEDOT:PSS as the incident light top-electrode, decent device performance can also be obtained, demonstrating the remarkable universality through this facile strategy.
|
|
| 22. |
- Qin, Leiqiang, et al.
(författare)
-
A flexible semitransparent photovoltaic supercapacitor based on water-processed MXene electrodes
- 2020
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry. - 2050-7488 .- 2050-7496. ; 8:11, s. 5467-5475
-
Tidskriftsartikel (refereegranskat)abstract
- Solar energy, although it has the highest power density available in terms of renewable energy, has the drawback of being erratic. Integrating an energy harvesting and storage device into photovoltaic energy storage modules is a viable route for obtaining self-powered energy systems. Herein, an MXene-based all-solution processed semitransparent flexible photovoltaic supercapacitor (PSC) was fabricated by integrating a flexible organic photovoltaic (OPV) with Ti3C2Tx MXene as the electrode and transparent MXene supercapacitors with an organic ionogel as the electrolyte in the vertical direction, using Ti3C2Tx thin film as a common electrode. In the quest for a semitransparent flexible PSC, Ti3C2Tx MXene was first used as a transparent electrode for OPV with a high power conversion efficiency of 13.6%. The ionogel electrolyte-based transparent MXene supercapacitor shows a high volumetric capacitance of 502 F cm(-3) and excellent stability. Finally, a flexible PSC with a high average transmittance of over 33.5% was successfully constructed by all-solution processing and a remarkable storage efficiency of 88% was achieved. This strategy enables a simple route for fabricating MXene based high-performance all-solution-processed flexible PSCs, which is important for realizing flexible and printable electronics for future technologies.
|
|
| 23. |
- Qin, Leiqiang, 1987-, et al.
(författare)
-
Flexible Solid-State Asymmetric Supercapacitors with Enhanced Performance Enabled by Free-Standing MXene-Biopolymer Nanocomposites and Hierarchical Graphene-RuOx Paper Electrodes
- 2020
-
Ingår i: Batteries & Supercaps. - : WILEY-V C H VERLAG GMBH. - 2566-6223. ; 3:7, s. 604-610
-
Tidskriftsartikel (refereegranskat)abstract
- Two-dimensional (2D) transition metal carbides and carbonitrides, called MXenes, with metallic conductivity and hydrophilic surfaces, show great promise as electrode materials for supercapacitors. A major drawback of 2D nanomaterials is the re-stacking of the nanosheets, which prevents full utilization of surface area and blocks the access of the electrolyte. In this study, a free-standing nanocomposite paper electrode is realized by combining Mo1.33C MXene and positively charged biopolymer lignin (the second most abundant biopolymer in nature, L-DEA). The self-assembled layered architecture with alternating polymer and MXene flakes increases the interlayer space to promote ion transport, and with combining charge storage capability of the lignin derivative and MXene in an interpenetrating MXene/L-DEA nanocomposite, which offers an impressive capacitance of 503.7 F g(-1). Moreover, we demonstrate flexible solid-state asymmetric supercapacitors (ASCs) using Mo1.33C@L-DEA as the negative electrode and electrochemically exfoliated graphene with ruthenium oxide (EG@RuOx) as the positive electrode. This asymmetric device operates at a voltage window of 1.35 V, which is about two times wider than that of a symmetric Mo1.33C@L-DEA based supercapacitor. Finally, the ASCs can deliver an energy density of 51.9 Wh kg(-1) at a power density of 338.5 W kg(-1), with 86 % capacitance retention after 10000 charge-discharge cycles.
|
|
| 24. |
- Qin, Leiqiang, 1987-, et al.
(författare)
-
MXene-based multifunctional smart fibers for wearable and portable electronics
- 2022
-
Ingår i: Journal of Materials Chemistry A. - : ROYAL SOC CHEMISTRY. - 2050-7488 .- 2050-7496. ; 10:23, s. 12544-12550
-
Tidskriftsartikel (refereegranskat)abstract
- Fiber type devices are promising for applications in wearable and portable electronics. However, scalable fabrication of fiber electrodes with multifunctional performance for use in distinct fields remains challenging. Herein, high performance smart fibers based on Mo1.33C i-MXene nanosheets and poly(3,4-ethylenedioxythiophene):polystyrene sulfonate hybrid paste are fabricated with an easily scalable spinning approach. The hybrid fibers produced by this method can be applied in both high-performance supercapacitors and electrochemical transistors (ECTs). When assembled into a fiber type asymmetric supercapacitor with reduced graphene oxide (rGO) fiber, a capacitance of 105 F g(-1) and an energy density of 37 mW h g(-1) were reached for a potential window of 1.6 V. The hybrid fiber based ECT shows high transconductance and fast response time. This work demonstrates the potential of i-MXene-based fiber electrodes for multifunctional applications, to aid in the development of the next-generation, high-performance wearable electronic devices.
|
|
| 25. |
- Qin, Leiqiang, et al.
(författare)
-
Thick Electrodes of a Self-Assembled MXene Hydrogel Composite for High-Rate Energy Storage
- 2023
-
Ingår i: Energy & Environmental Materials. - : WILEY. - 2575-0356.
-
Tidskriftsartikel (refereegranskat)abstract
- Supercapacitors based on two-dimensional MXene (Ti3C2Tz) have shown extraordinary performance in ultrathin electrodes with low mass loading, but usually there is a significant reduction in high-rate performance as the thickness increases, caused by increasing ion diffusion limitation. Further limitations include restacking of the nanosheets, which makes it challenging to realize the full potential of these electrode materials. Herein, we demonstrate the design of a vertically aligned MXene hydrogel composite, achieved by thermal-assisted self-assembled gelation, for high-rate energy storage. The highly interconnected MXene network in the hydrogel architecture provides very good electron transport properties, and its vertical ion channel structure facilitates rapid ion transport. The resulting hydrogel electrode show excellent performance in both aqueous and organic electrolytes with respect to high capacitance, stability, and high-rate capability for up to 300 mu m thick electrodes, which represents a significant step toward practical applications.
|
|
