1. |
- Lozano, Rafael, et al.
(författare)
-
Measuring progress from 1990 to 2017 and projecting attainment to 2030 of the health-related Sustainable Development Goals for 195 countries and territories: a systematic analysis for the Global Burden of Disease Study 2017
- 2018
-
Ingår i: The Lancet. - : Elsevier. - 1474-547X .- 0140-6736. ; 392:10159, s. 2091-2138
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Efforts to establish the 2015 baseline and monitor early implementation of the UN Sustainable Development Goals (SDGs) highlight both great potential for and threats to improving health by 2030. To fully deliver on the SDG aim of “leaving no one behind”, it is increasingly important to examine the health-related SDGs beyond national-level estimates. As part of the Global Burden of Diseases, Injuries, and Risk Factors Study 2017 (GBD 2017), we measured progress on 41 of 52 health-related SDG indicators and estimated the health-related SDG index for 195 countries and territories for the period 1990–2017, projected indicators to 2030, and analysed global attainment. Methods: We measured progress on 41 health-related SDG indicators from 1990 to 2017, an increase of four indicators since GBD 2016 (new indicators were health worker density, sexual violence by non-intimate partners, population census status, and prevalence of physical and sexual violence [reported separately]). We also improved the measurement of several previously reported indicators. We constructed national-level estimates and, for a subset of health-related SDGs, examined indicator-level differences by sex and Socio-demographic Index (SDI) quintile. We also did subnational assessments of performance for selected countries. To construct the health-related SDG index, we transformed the value for each indicator on a scale of 0–100, with 0 as the 2·5th percentile and 100 as the 97·5th percentile of 1000 draws calculated from 1990 to 2030, and took the geometric mean of the scaled indicators by target. To generate projections through 2030, we used a forecasting framework that drew estimates from the broader GBD study and used weighted averages of indicator-specific and country-specific annualised rates of change from 1990 to 2017 to inform future estimates. We assessed attainment of indicators with defined targets in two ways: first, using mean values projected for 2030, and then using the probability of attainment in 2030 calculated from 1000 draws. We also did a global attainment analysis of the feasibility of attaining SDG targets on the basis of past trends. Using 2015 global averages of indicators with defined SDG targets, we calculated the global annualised rates of change required from 2015 to 2030 to meet these targets, and then identified in what percentiles the required global annualised rates of change fell in the distribution of country-level rates of change from 1990 to 2015. We took the mean of these global percentile values across indicators and applied the past rate of change at this mean global percentile to all health-related SDG indicators, irrespective of target definition, to estimate the equivalent 2030 global average value and percentage change from 2015 to 2030 for each indicator. Findings: The global median health-related SDG index in 2017 was 59·4 (IQR 35·4–67·3), ranging from a low of 11·6 (95% uncertainty interval 9·6–14·0) to a high of 84·9 (83·1–86·7). SDG index values in countries assessed at the subnational level varied substantially, particularly in China and India, although scores in Japan and the UK were more homogeneous. Indicators also varied by SDI quintile and sex, with males having worse outcomes than females for non-communicable disease (NCD) mortality, alcohol use, and smoking, among others. Most countries were projected to have a higher health-related SDG index in 2030 than in 2017, while country-level probabilities of attainment by 2030 varied widely by indicator. Under-5 mortality, neonatal mortality, maternal mortality ratio, and malaria indicators had the most countries with at least 95% probability of target attainment. Other indicators, including NCD mortality and suicide mortality, had no countries projected to meet corresponding SDG targets on the basis of projected mean values for 2030 but showed some probability of attainment by 2030. For some indicators, including child malnutrition, several infectious diseases, and most violence measures, the annualised rates of change required to meet SDG targets far exceeded the pace of progress achieved by any country in the recent past. We found that applying the mean global annualised rate of change to indicators without defined targets would equate to about 19% and 22% reductions in global smoking and alcohol consumption, respectively; a 47% decline in adolescent birth rates; and a more than 85% increase in health worker density per 1000 population by 2030. Interpretation: The GBD study offers a unique, robust platform for monitoring the health-related SDGs across demographic and geographic dimensions. Our findings underscore the importance of increased collection and analysis of disaggregated data and highlight where more deliberate design or targeting of interventions could accelerate progress in attaining the SDGs. Current projections show that many health-related SDG indicators, NCDs, NCD-related risks, and violence-related indicators will require a concerted shift away from what might have driven past gains—curative interventions in the case of NCDs—towards multisectoral, prevention-oriented policy action and investments to achieve SDG aims. Notably, several targets, if they are to be met by 2030, demand a pace of progress that no country has achieved in the recent past. The future is fundamentally uncertain, and no model can fully predict what breakthroughs or events might alter the course of the SDGs. What is clear is that our actions—or inaction—today will ultimately dictate how close the world, collectively, can get to leaving no one behind by 2030.
|
|
2. |
- Murray, Christopher J. L., et al.
(författare)
-
Population and fertility by age and sex for 195 countries and territories, 1950–2017: a systematic analysis for the Global Burden of Disease Study 2017
- 2018
-
Ingår i: The Lancet. - 1474-547X .- 0140-6736. ; 392:10159, s. 1995-2051
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Population estimates underpin demographic and epidemiological research and are used to track progress on numerous international indicators of health and development. To date, internationally available estimates of population and fertility, although useful, have not been produced with transparent and replicable methods and do not use standardised estimates of mortality. We present single-calendar year and single-year of age estimates of fertility and population by sex with standardised and replicable methods. Methods: We estimated population in 195 locations by single year of age and single calendar year from 1950 to 2017 with standardised and replicable methods. We based the estimates on the demographic balancing equation, with inputs of fertility, mortality, population, and migration data. Fertility data came from 7817 location-years of vital registration data, 429 surveys reporting complete birth histories, and 977 surveys and censuses reporting summary birth histories. We estimated age-specific fertility rates (ASFRs; the annual number of livebirths to women of a specified age group per 1000 women in that age group) by use of spatiotemporal Gaussian process regression and used the ASFRs to estimate total fertility rates (TFRs; the average number of children a woman would bear if she survived through the end of the reproductive age span [age 10–54 years] and experienced at each age a particular set of ASFRs observed in the year of interest). Because of sparse data, fertility at ages 10–14 years and 50–54 years was estimated from data on fertility in women aged 15–19 years and 45–49 years, through use of linear regression. Age-specific mortality data came from the Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2017 estimates. Data on population came from 1257 censuses and 761 population registry location-years and were adjusted for underenumeration and age misreporting with standard demographic methods. Migration was estimated with the GBD Bayesian demographic balancing model, after incorporating information about refugee migration into the model prior. Final population estimates used the cohort-component method of population projection, with inputs of fertility, mortality, and migration data. Population uncertainty was estimated by use of out-of-sample predictive validity testing. With these data, we estimated the trends in population by age and sex and in fertility by age between 1950 and 2017 in 195 countries and territories. Findings: From 1950 to 2017, TFRs decreased by 49·4% (95% uncertainty interval [UI] 46·4–52·0). The TFR decreased from 4·7 livebirths (4·5–4·9) to 2·4 livebirths (2·2–2·5), and the ASFR of mothers aged 10–19 years decreased from 37 livebirths (34–40) to 22 livebirths (19–24) per 1000 women. Despite reductions in the TFR, the global population has been increasing by an average of 83·8 million people per year since 1985. The global population increased by 197·2% (193·3–200·8) since 1950, from 2·6 billion (2·5–2·6) to 7·6 billion (7·4–7·9) people in 2017; much of this increase was in the proportion of the global population in south Asia and sub-Saharan Africa. The global annual rate of population growth increased between 1950 and 1964, when it peaked at 2·0%; this rate then remained nearly constant until 1970 and then decreased to 1·1% in 2017. Population growth rates in the southeast Asia, east Asia, and Oceania GBD super-region decreased from 2·5% in 1963 to 0·7% in 2017, whereas in sub-Saharan Africa, population growth rates were almost at the highest reported levels ever in 2017, when they were at 2·7%. The global average age increased from 26·6 years in 1950 to 32·1 years in 2017, and the proportion of the population that is of working age (age 15–64 years) increased from 59·9% to 65·3%. At the national level, the TFR decreased in all countries and territories between 1950 and 2017; in 2017, TFRs ranged from a low of 1·0 livebirths (95% UI 0·9–1·2) in Cyprus to a high of 7·1 livebirths (6·8–7·4) in Niger. The TFR under age 25 years (TFU25; number of livebirths expected by age 25 years for a hypothetical woman who survived the age group and was exposed to current ASFRs) in 2017 ranged from 0·08 livebirths (0·07–0·09) in South Korea to 2·4 livebirths (2·2–2·6) in Niger, and the TFR over age 30 years (TFO30; number of livebirths expected for a hypothetical woman ageing from 30 to 54 years who survived the age group and was exposed to current ASFRs) ranged from a low of 0·3 livebirths (0·3–0·4) in Puerto Rico to a high of 3·1 livebirths (3·0–3·2) in Niger. TFO30 was higher than TFU25 in 145 countries and territories in 2017. 33 countries had a negative population growth rate from 2010 to 2017, most of which were located in central, eastern, and western Europe, whereas population growth rates of more than 2·0% were seen in 33 of 46 countries in sub-Saharan Africa. In 2017, less than 65% of the national population was of working age in 12 of 34 high-income countries, and less than 50% of the national population was of working age in Mali, Chad, and Niger. Interpretation: Population trends create demographic dividends and headwinds (ie, economic benefits and detriments) that affect national economies and determine national planning needs. Although TFRs are decreasing, the global population continues to grow as mortality declines, with diverse patterns at the national level and across age groups. To our knowledge, this is the first study to provide transparent and replicable estimates of population and fertility, which can be used to inform decision making and to monitor progress. Funding: Bill & Melinda Gates Foundation.
|
|
3. |
- Stanaway, Jeffrey D., et al.
(författare)
-
Global, regional, and national comparative risk assessment of 84 behavioural, environmental and occupational, and metabolic risks or clusters of risks for 195 countries and territories, 1990-2017: A systematic analysis for the Global Burden of Disease Study 2017
- 2018
-
Ingår i: The Lancet. - 1474-547X .- 0140-6736. ; 392:10159, s. 1923-1994
-
Tidskriftsartikel (refereegranskat)abstract
- Background The Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2017 comparative risk assessment (CRA) is a comprehensive approach to risk factor quantification that offers a useful tool for synthesising evidence on risks and risk-outcome associations. With each annual GBD study, we update the GBD CRA to incorporate improved methods, new risks and risk-outcome pairs, and new data on risk exposure levels and risk- outcome associations. Methods We used the CRA framework developed for previous iterations of GBD to estimate levels and trends in exposure, attributable deaths, and attributable disability-adjusted life-years (DALYs), by age group, sex, year, and location for 84 behavioural, environmental and occupational, and metabolic risks or groups of risks from 1990 to 2017. This study included 476 risk-outcome pairs that met the GBD study criteria for convincing or probable evidence of causation. We extracted relative risk and exposure estimates from 46 749 randomised controlled trials, cohort studies, household surveys, census data, satellite data, and other sources. We used statistical models to pool data, adjust for bias, and incorporate covariates. Using the counterfactual scenario of theoretical minimum risk exposure level (TMREL), we estimated the portion of deaths and DALYs that could be attributed to a given risk. We explored the relationship between development and risk exposure by modelling the relationship between the Socio-demographic Index (SDI) and risk-weighted exposure prevalence and estimated expected levels of exposure and risk-attributable burden by SDI. Finally, we explored temporal changes in risk-attributable DALYs by decomposing those changes into six main component drivers of change as follows: (1) population growth; (2) changes in population age structures; (3) changes in exposure to environmental and occupational risks; (4) changes in exposure to behavioural risks; (5) changes in exposure to metabolic risks; and (6) changes due to all other factors, approximated as the risk-deleted death and DALY rates, where the risk-deleted rate is the rate that would be observed had we reduced the exposure levels to the TMREL for all risk factors included in GBD 2017.
|
|
4. |
- Sumbal, Muhammad Saleem, et al.
(författare)
-
A framework to retain the knowledge of departing knowledge workers in the manufacturing industry
- 2020
-
Ingår i: VINE. - : Emerald Group Publishing Limited. - 2059-5891. ; 50:4, s. 631-661
-
Tidskriftsartikel (refereegranskat)abstract
- Purpose: The purpose of this study is to develop a conceptual framework on knowledge loss in a manufacturing sector based on three aspects: likelihood of knowledge loss, critical areas of knowledge loss and relevance of each of these knowledge areas in terms of utilization and alignment with organizational goals and strategy. Such a conceptual framework can be helpful to the practicing managers in understanding the types of knowledge that is lost of a given departing employee and thus deciding on a measure to retain the critical employees or capture their knowledge before they leave. Design/methodology/approach: Using a case study approach, data has been collected from a multinational battery manufacturing company based in Hong Kong. Semi-structured interviews have been conducted and analyzed through CAQDAS ATLAS.ti to generate the themes which were then used to develop the conceptual framework. Findings: The findings revealed that the likelihood factors of knowledge loss in the manufacturing sector include layoffs, retirement, immigration and job change. The critical areas of knowledge loss comprise the knowledge of relationships and networks, especially with the customers and suppliers, the technical knowledge (battery and process technology) and knowledge of management, among others. The relevance of each of these knowledge areas needs to be determined through proper analysis whether these knowledge areas are needed in future projects, up to date and aligned with organizational goals and strategy along with other factors. Research limitations/implications: Using the developed conceptual framework, managers and executives can identify critical employees in the manufacturing sector and accordingly take some appropriate measures to retain their knowledge. Caution should be taken while applying the findings of this study in other industries and context. Originality/value: This paper is an attempt to reduce the dearth of empirical studies by exploring knowledge retention in the manufacturing sector, especially in the development of proper conceptual frameworks to assess the potential knowledge loss of employees.
|
|
5. |
- Feigin, Valery L., et al.
(författare)
-
Global, regional, and national burden of neurological disorders, 1990–2016 : a systematic analysis for the Global Burden of Disease Study 2016
- 2019
-
Ingår i: Lancet Neurology. - : Elsevier. - 1474-4422 .- 1474-4465. ; 18:5, s. 459-480
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Neurological disorders are increasingly recognised as major causes of death and disability worldwide. The aim of this analysis from the Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2016 is to provide the most comprehensive and up-to-date estimates of the global, regional, and national burden from neurological disorders.Methods: We estimated prevalence, incidence, deaths, and disability-adjusted life-years (DALYs; the sum of years of life lost [YLLs] and years lived with disability [YLDs]) by age and sex for 15 neurological disorder categories (tetanus, meningitis, encephalitis, stroke, brain and other CNS cancers, traumatic brain injury, spinal cord injury, Alzheimer's disease and other dementias, Parkinson's disease, multiple sclerosis, motor neuron diseases, idiopathic epilepsy, migraine, tension-type headache, and a residual category for other less common neurological disorders) in 195 countries from 1990 to 2016. DisMod-MR 2.1, a Bayesian meta-regression tool, was the main method of estimation of prevalence and incidence, and the Cause of Death Ensemble model (CODEm) was used for mortality estimation. We quantified the contribution of 84 risks and combinations of risk to the disease estimates for the 15 neurological disorder categories using the GBD comparative risk assessment approach.Findings: Globally, in 2016, neurological disorders were the leading cause of DALYs (276 million [95% UI 247–308]) and second leading cause of deaths (9·0 million [8·8–9·4]). The absolute number of deaths and DALYs from all neurological disorders combined increased (deaths by 39% [34–44] and DALYs by 15% [9–21]) whereas their age-standardised rates decreased (deaths by 28% [26–30] and DALYs by 27% [24–31]) between 1990 and 2016. The only neurological disorders that had a decrease in rates and absolute numbers of deaths and DALYs were tetanus, meningitis, and encephalitis. The four largest contributors of neurological DALYs were stroke (42·2% [38·6–46·1]), migraine (16·3% [11·7–20·8]), Alzheimer's and other dementias (10·4% [9·0–12·1]), and meningitis (7·9% [6·6–10·4]). For the combined neurological disorders, age-standardised DALY rates were significantly higher in males than in females (male-to-female ratio 1·12 [1·05–1·20]), but migraine, multiple sclerosis, and tension-type headache were more common and caused more burden in females, with male-to-female ratios of less than 0·7. The 84 risks quantified in GBD explain less than 10% of neurological disorder DALY burdens, except stroke, for which 88·8% (86·5–90·9) of DALYs are attributable to risk factors, and to a lesser extent Alzheimer's disease and other dementias (22·3% [11·8–35·1] of DALYs are risk attributable) and idiopathic epilepsy (14·1% [10·8–17·5] of DALYs are risk attributable).Interpretation: Globally, the burden of neurological disorders, as measured by the absolute number of DALYs, continues to increase. As populations are growing and ageing, and the prevalence of major disabling neurological disorders steeply increases with age, governments will face increasing demand for treatment, rehabilitation, and support services for neurological disorders. The scarcity of established modifiable risks for most of the neurological burden demonstrates that new knowledge is required to develop effective prevention and treatment strategies.Funding: Bill & Melinda Gates Foundation.
|
|
6. |
- Hanan, Abdul, et al.
(författare)
-
PdO@CoSe2 composites: efficient electrocatalysts for water oxidation in alkaline media
- 2022
-
Ingår i: RSC Advances. - : ROYAL SOC CHEMISTRY. - 2046-2069. ; 13:1, s. 743-755
-
Tidskriftsartikel (refereegranskat)abstract
- In this study, we have prepared cobalt selenide (CoSe2) due to its useful aspects from a catalysis point of view such as abundant active sites from Se edges, and significant stability in alkaline conditions. CoSe2, however, has yet to prove its functionality, so we doped palladium oxide (PdO) onto CoSe2 nanostructures using ultraviolet (UV) light, resulting in an efficient and stable water oxidation composite. The crystal arrays, morphology, and chemical composition of the surface were studied using a variety of characterization techniques, including X-ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared (FTIR) spectroscopy. It was also demonstrated that the composite systems were heterogeneous in their morphology, undergoing a shift in their diffraction patterns, suffering from a variety of metal oxidation states and surface defects. The water oxidation was verified by a low overpotential of 260 mV at a current density of 20 mA cm(-2) with a Tafel Slope value of 57 mV dec(-1). The presence of multi metal oxidation states, rich surface edges of Se and favorable charge transport played a leading role towards water oxidation with a low energy demand. Furthermore, 48 h of durability is associated with the composite system. With the use of PdO and CoSe2, new, low efficiency, simple electrocatalysts for water catalysis have been developed, enabling the development of practical energy conversion and storage systems. This is an excellent alternative approach for fostering growth in the field.
|
|
7. |
- Khattak, Muhammad Irfan, et al.
(författare)
-
A Planar UWB Antenna with Tripple Notched Bands
- 2017
-
Ingår i: 2017 9th International Confernce on Computational Intelligence and Communication Networks (CICN). - : Institute of Electrical and Electronics Engineers (IEEE). - 9781509050017 ; , s. 1-5
-
Konferensbidrag (refereegranskat)abstract
- This paper presents a rectangular planar monopole antenna with triple stop bands for ultra-wide band Applications. The antenna is compact size (24mm x 24mm x 1.6mm) and is covering the entire UWB band with VSWR < 2 except the band of WiMAX range from 3.07 - 4.73 GHz, the WLAN band range from 5.14 - 5.97 GHz and the ITU frequency band range from of 7.92 - 8.61 GHz. The three slots are added to this antenna to stop various bands. Different shaped slots i.e. inverted Z, C and U are introduced in radiating element to stop WiMAX, WLAN and ITU respectively. The antenna is simulated using High Frequency Structure Simulator (HFSS) using FR4 as a substrate.
|
|
8. |
- Abelev, Betty, et al.
(författare)
-
Long-range angular correlations on the near and away side in p-Pb collisions at root S-NN=5.02 TeV
- 2013
-
Ingår i: Physics Letters. Section B: Nuclear, Elementary Particle and High-Energy Physics. - : Elsevier BV. - 0370-2693. ; 719:1-3, s. 29-41
-
Tidskriftsartikel (refereegranskat)abstract
- Angular correlations between charged trigger and associated particles are measured by the ALICE detector in p-Pb collisions at a nucleon-nucleon centre-of-mass energy of 5.02 TeV for transverse momentum ranges within 0.5 < P-T,P-assoc < P-T,P-trig < 4 GeV/c. The correlations are measured over two units of pseudorapidity and full azimuthal angle in different intervals of event multiplicity, and expressed as associated yield per trigger particle. Two long-range ridge-like structures, one on the near side and one on the away side, are observed when the per-trigger yield obtained in low-multiplicity events is subtracted from the one in high-multiplicity events. The excess on the near-side is qualitatively similar to that recently reported by the CMS Collaboration, while the excess on the away-side is reported for the first time. The two-ridge structure projected onto azimuthal angle is quantified with the second and third Fourier coefficients as well as by near-side and away-side yields and widths. The yields on the near side and on the away side are equal within the uncertainties for all studied event multiplicity and p(T) bins, and the widths show no significant evolution with event multiplicity or p(T). These findings suggest that the near-side ridge is accompanied by an essentially identical away-side ridge. (c) 2013 CERN. Published by Elsevier B.V. All rights reserved.
|
|
9. |
- Ahmad, Naveed, et al.
(författare)
-
Csr communication through social media : A litmus test for banking consumers’ loyalty
- 2021
-
Ingår i: Sustainability (Switzerland). - : MDPI AG. - 2071-1050. ; 13:4, s. 1-16
-
Tidskriftsartikel (refereegranskat)abstract
- Prior literature in the field of corporate social responsibility (CSR) has largely focused on investigating its relationship with organizational-related outcomes, whereas the impact of CSR on consumer behavior is largely ignored in the recent literature. Further, most of the prior studies have investigated CSR with a philanthropic viewpoint, but its importance in achieving marketing-related outcomes is something that is to date, underexplored. Hence, the aim of the present study is to investigate the impact of CSR communication through social media on consumer loyalty with the mediating effect of consumers’ brand admiration in the banking sector of Pakistan. The banking sector was selected due to the reason that this sector is homogenized in nature and creating consumers’ loyalty due to this homogenized character of this sector is challenging. The data of the present study were collected from different banking consumers through an adapted questionnaire on a five-point Likert scale. A total of 448 fully filled questionnaires were received which included 289 male and 159 female banking consumers. The results of the present study revealed that CSR communications through social media have a positive impact on consumer loyalty, and consum-ers’ brand admiration partially mediates this relationship. The findings of the present study would help policymakers from banking institutions to use CSR strategy from the perspective of marketing which is undoubtedly very important for every organization in the current digital age.
|
|
10. |
- Akhtar, Nadia, et al.
(författare)
-
Uncovering Barriers for Industrial Symbiosis : Assessing Prospects for Eco-Industrialization through Small and Medium-Sized Enterprises in Developing Regions
- 2022
-
Ingår i: Sustainability. - : MDPI AG. - 2071-1050. ; 14:11, s. 6898-
-
Tidskriftsartikel (refereegranskat)abstract
- Industrialization is indispensable for socio-economic development but poses far-reaching implications for resources and the environment. Consequently, industrial symbiosis-based collaborations are gaining recognition as a viable strategy to manage resource consumption for mitigating environmental distress. However, these types of synergistic collaborations are more prevalent in developed regions and are linked to larger-sized industries. Admittedly, such collaborative partnerships are less focused in developing regions and small- to medium-size enterprises (SMEs). This calls for discovering the potentials for synergistic partnerships among the small and medium scaled industrial entities in developing economies. Therefore, the study was designed to identify, assess and explore the prospects of symbiotic collaborations among SMEs in Pakistan. Moreover, the inputs are equally relevant for developing and expanding such productive associations in developing regions. Data regarding inputs and outputs was collected from sixty-one (61) SMEs through field survey during the year 2019. It was processed and analyzed to uncover existing and potential synergies among SMEs. The significant findings transpired that the majority of collaborative linkages are bilateral and are driven to maximize economic gains. However, informal networks of recyclers and absence of a stringent regulatory regime are the ground realities in developing/transforming economies. These factors symptomatically interfere with the process of formal/informal exchanges between and among firms. Furthermore, it was observed that the lack of awareness and impulsiveness of SMEs, as well as the inconsistent supply of by-products, act as barriers for such partnerships in developing countries. It calls for proactive engagements and facilitations from the state institutions through policy instruments. The study addresses a broad audience including industrialists, investors, policy makers and researchers engaged in IS studies. Moreover, the inputs will provide impetus for stimulating eco-industrial progress in developing regions such as Pakistan.
|
|
11. |
- Ali, Irfan, et al.
(författare)
-
A thermal-aware scheduling algorithm for reducing thermal risks in DAG-based applications in cyber-physical systems
- 2023
-
Ingår i: Ubiquitous security. - Singapore : Springer. - 9789819902712 - 9789819902729 ; , s. 497-508
-
Konferensbidrag (refereegranskat)abstract
- Directed Acyclic Graph (DAG)-based scheduling applications are critical to resource allocation in the Cloud, Edge, and Fog layers of cyber-physical systems (CPS). However, thermal anomalies in DVFS-enabled homogeneous multiprocessor systems (HMSS) may be exploited by malicious applications posing risks to the availability of the underlying CPS. This can negatively affect the trustworthiness of CPS. This paper proposes an algorithm to address the thermal risks in DVFS-enabled HMSS for periodic DAG-based applications. It also improves the current list scheduling-based Depth-First and Breadth-First techniques without violating the timing constraints of the system. We test the algorithm using standard benchmarks and synthetic applications in a simulation setup. The results show a reduction in the temperature peaks by up to 30%, average temperature by up to 22%, temperature variations up to 3 times, and temperature spatial gradients by up to 4 times as compared to the conventional Depth-First Scheduling algorithms.
|
|
12. |
- Anwar, Hamid, et al.
(författare)
-
Intercomparison of deep learning models in predicting streamflow patterns: insight from CMIP6
- 2024
-
Ingår i: Scientific Reports. - : Springer Nature. - 2045-2322. ; 14
-
Tidskriftsartikel (refereegranskat)abstract
- This research was carried out to predict daily streamflow for the Swat River Basin, Pakistan through four deep learning (DL) models: Feed Forward Artificial Neural Networks (FFANN), Seasonal Artificial Neural Networks (SANN), Time Lag Artificial Neural Networks (TLANN) and Long Short-Term Memory (LSTM) under two Shared Socioeconomic Pathways (SSPs) 585 and 245. Taylor Diagram, Random Forest, and Gradient Boosting techniques were used to select the best combination of General Circulation Models (GCMs) for Multi-Model Ensemble (MME) computation. MME was computed via the Random Forest technique for Maximum Temperature (Tmax), Minimum Temperature (Tmin), and precipitation for the aforementioned three techniques. The best MME for Tmax, Tmin, and precipitation was rendered by Compromise Programming. The DL models were trained and tested using observed precipitation and temperature as independent variables and discharge as dependent variables. The results of deep learning models were evaluated using statistical performance indicators such as root mean square error (RMSE), mean square error (MSE), mean absolute error (MAE), and coefficient of determination (R2). The TLANN demonstrated superior performance compared to the other models based on RMSE, MSE, MAE, and R2 during training (65.25 m3/s, 4256.97 m3/s, 46.793 m3/s and 0.7978) and testing (72.06 m3/s, 5192.95 m3/s, 51.363 m3/s and 0.7443) respectively. Subsequently, TLANN was utilized to make predictions based on MME of SSP245 and SSP585 scenarios for future streamflow until the year 2100. These results can be used for planning, management, and policy-making regarding water resources projects in the study area.
|
|
13. |
|
|
14. |
- Hassan, Mohsan, et al.
(författare)
-
Effects of Cu–Ag hybrid nanoparticles on the momentum and thermal boundary layer flow over the wedge
- 2019
-
Ingår i: Proceedings of the Institution of mechanical engineers. Part E, journal of process mechanical engineering. - : Sage Publications. - 0954-4089 .- 2041-3009. ; 233:5, s. 1128-1136
-
Tidskriftsartikel (refereegranskat)abstract
- In this work, the effects of hybrid nanoparticles on the momentum and thermal boundary layers as well as flow characteristics and thermal performance of the hybrid nanofluid are investigated over the wedge. The fluid in the enclosure is water containing hybrid nanoparticles Cu–Ag. The physical model of homogenous hybrid nanofluid is derived using the elementary equations of thermo-hydrodynamic and co-relation's model of a mixture that supports the effective physical features. The results are calculated to measure the effects of nanoparticle concentration on thermal and momentum boundary layers and displayed in graphs for discussions. In addition, the effects of nanoparticles concentration and different compositions of hybrid nanoparticles on temperature and velocity profiles, physical properties, skin friction, and convective heat transfer coefficient are deliberated through graphs and tables. To check its heat transfer performance, a comparison of hybrid nanofluid is made between the base fluid and single material nanofluids. It is found that the efficiency of hybrid nanofluids as a heat transfer fluid is much more than conventional fluids or single nanoparticles-based nanofluids. These results in terms of boundary layers phenomena, heat transfer performance, and temperature and velocity profiles under hybrid nanomaterial could help chemical engineers to design the critical equipment in a process industry such as heat exchangers and pumps and others.
|
|
15. |
- Irfan, Muhammad, et al.
(författare)
-
Tuning the Optoelectronic Properties of Naphtho-Dithiophene-Based A-D-A Type Small Donor Molecules for Bulk Hetero-Junction Organic Solar Cells
- 2018
-
Ingår i: ChemistrySelect. - : John Wiley & Sons. - 2365-6549. ; 3:8, s. 2352-2358
-
Tidskriftsartikel (refereegranskat)abstract
- Four acceptor-donor-acceptor (A-D-A) type small molecules using naphtho-dithiophene as central building block, trithiophene as -bridges, malononitrile and 2-Thioxo-thiazolidin-4-one as end acceptor groups were designed by using density functional theory (DFT) and investigated as donor materials for organic solar cells (OSCs). The effects of end acceptor groups on absorption, charge transport, morphology, energy level and photovoltaic properties of the molecules were investigated and compared with reference molecule (R1= NDTP-CNCOO). These designed molecules showed relatively low HOMO levels of -5.46 to -5.56eV, strong absorption between 440-650nm by using chloroform as solvent. The designed donor molecules have an excellent electron mobility from 0.0161 to 0.0201V, hole mobility from 0.0275 to 0.0307V and open circuit voltage (Voc) from 1.76 to 1.86V. This study revealed that the designed donor materials are suitable and recommended for high performance organic solar cell devices.
|
|
16. |
- Javed, Muhammad Tayeb, et al.
(författare)
-
A comparative kinetic study of SNCR process using ammonia
- 2008
-
Ingår i: Brazilian journal of chemical engineering. - : Brazilian Society of Chemical Engineering. - 0104-6632 .- 1678-4383. ; 25:1, s. 109-117
-
Tidskriftsartikel (refereegranskat)abstract
- The paper presents comparative kinetic modelling of nitrogen oxides (NOx) removal from flue gases by selective non-catalytic reduction process using ammonia as reducing agent. The computer code SENKIN is used in this study with the three published chemical kinetic mechanisms; Zanoelo, Kilpinen and Skreiberg. Kinetic modeling was performed for an isothermal plug flow reactor at atmospheric pressure so as to compare it with the experimental results. A 500 ppm NOx background in the flue gas is considered and kept constant throughout the investigation. The ammonia performance was modeled in the range of 750 to 1250 ºC using the molar ratios NH3/NOx from 0.25 to 3.0 and residence times up to 1.5 seconds. The modeling using all the mechanisms exhibits and confirms a temperature window of NOx reduction with ammonia. It was observed that 80% of NOxreduction efficiency could be achieved if the flue gas is given 300 msec to react with ammonia, while it is passing through a section within a temperature range of 910 to 1060 ºC (Kilpinen mechanism) or within a temperature range of 925 to 1030 ºC (Zanoelo mechanism) or within a temperature range of 890 to 1090 ºC (Skreiberg mechanism).
|
|
17. |
- Javed, Muhammad Tayyeb, et al.
(författare)
-
Combustion Kinetics Modelling
- 2010
-
Ingår i: Handbook of Combustion. - Weinheim, Germany : John Wiley & Sons. - 9783527324491 ; , s. 153-173
-
Bokkapitel (refereegranskat)abstract
- Combustion is a complex phenomenon characterized by the interaction and competition of various physical and chemical processes. The correct description of chemical changes requires the application of reaction mechanisms that consist of several hundreds or thousands of elementary reactions. This creates an opportunity for kinetic modeling to play important role in understanding the combustion phenomenon. This chapter provides an overview of combustion modeling, the main aim being to present a comprehensive knowledge base for combustion kinetic modeling. The coupling of fluid dynamics and chemical kinetics using commercial software such as CHEMKIN and FLUENT is also discussed. Moreover, an exemplary approach for reducing complex chemical reaction mechanisms is illustrated with reference to an H2 + O2 mixture in an adiabatic system. This approach involves the identification of redundant species via rate sensitivity analysis, and of redundant reactions, by principal component analysis of the rate sensitivity matrix. An eigenvalue–eigenvector analysis is used to extract meaningful kinetic information from linear sensitivity coefficients computed for all species of chemical mechanism at several time points. The main advantage of this method lies in its ability to reveal those parts of the mechanism, which consist of strongly interacting reactions, and to indicate their importance within the mechanism. By using the above procedures, reduced reaction mechanisms could be developed at different chosen conditions and employed in CFD codes in place of detailed mechanisms, giving due consideration to flow fields.
|
|
18. |
|
|
19. |
- Kazim, Muhammad Irfan, et al.
(författare)
-
An Efficient Full-Wave Electromagnetic Analysis for Capacitive Body-Coupled Communication
- 2015
-
Ingår i: International Journal of Antennas and Propagation. - : Hindawi Limited. - 1687-5869 .- 1687-5877. ; 2015, s. 15-
-
Tidskriftsartikel (refereegranskat)abstract
- Measured propagation loss for capacitive body-coupled communication (BCC) channel (1 MHz to 60 MHz) is limitedly available in the literature for distances longer than 50 cm. This is either because of experimental complexity to isolate the earth-ground or design complexity in realizing a reliable communication link to assess the performance limitations of capacitive BCC channel. Therefore, an alternate efficient full-wave electromagnetic (EM) simulation approach is presented to realistically analyze capacitive BCC, that is, the interaction of capacitive coupler, the human body, and the environment all together. The presented simulation approach is first evaluated for numerical/human body variation uncertainties and then validated with measurement results from literature, followed by the analysis of capacitive BCC channel for twenty different scenarios. The simulation results show that the vertical coupler configuration is less susceptible to physiological variations of underlying tissues compared to the horizontal coupler configuration. The propagation loss is less for arm positions when they are not touching the torso region irrespective of the communication distance. The propagation loss has also been explained for complex scenarios formed by the ground-plane and the material structures (metals or dielectrics) with the human body. The estimated propagation loss has been used to investigate the link-budget requirement for designing capacitive BCC system in CMOS sub-micron technologies.
|
|
20. |
- Kazim, Muhammad Irfan, et al.
(författare)
-
Complex path impedance estimation and matching requirements for body-coupled communication
- 2015
-
Ingår i: Circuit Theory and Design (ECCTD), 2015 European Conference on. - : IEEE. - 9781479998777 ; , s. 424-427
-
Konferensbidrag (refereegranskat)abstract
- Capacitive body coupled communication (BCC) channel has been modeled as a two-port complex path impedance matrix [Z] which varies as a function of ten different body positions over the frequency range of 1 MHz to 60 MHz. A systematic numerical simulation methodology has been used to estimate [Z] parameters. The estimated complex path impedance [Z] is a symmetric matrix showing BCC channel is a reciprocal network of passive components for given coupler configuration, body positions and frequency range. The estimated complex path impedance has been utilized to determine either input impedance Zin or output impedance Zout to conjugately match to Zs at transmitter or Zl at receiver, respectively for maximum power transfer. It has been found that the resistive matching below 1000 O and inductive matching between 0.5 ï¿œH to 5 ï¿œH on any side of the two ports can meet the conjugate matching requirements for maximum power transfer for the given body positions and frequency range.
|
|
21. |
- Kazim, Muhammad Irfan, et al.
(författare)
-
Realistic path loss estimation for capacitive body-coupled communication
- 2015
-
Ingår i: Circuit Theory and Design (ECCTD), 2015 European Conference on. - : IEEE. - 9781479998777 ; , s. 173-176
-
Konferensbidrag (refereegranskat)abstract
- Realistic estimation of path loss is vital for designing an effective capacitive body-coupled communication system. The estimation based on simplified analytical models, however, results in errors as they do not model capacitive couplers accurately and different body positions. The proposed efficient full-wave electromagnetic (EM) model takes into account the effect of capacitive coupler, electro-physiological properties of tissues in human body, different body positions and environment all together to realistically predict the path loss. A comparison of both approaches is made in this paper, showing the superior performance of the proposed model.
|
|
22. |
- Khan, Muhammad Ahsan Iqbal, et al.
(författare)
-
An Experimental and Comparative Performance Evaluation of a Hybrid Photovoltaic-Thermoelectric System
- 2021
-
Ingår i: Frontiers in Energy Research. - : FRONTIERS MEDIA SA. - 2296-598X. ; 9
-
Tidskriftsartikel (refereegranskat)abstract
- The majority of incident solar irradiance causes thermalization in photovoltaic (PV) cells, attenuating their efficiency. In order to use solar energy on a large scale and reduce carbon emissions, their efficiency must be enhanced. Effective thermal management can be utilized to generate additional electrical power while simultaneously improving photovoltaic efficiency. In this work, an experimental model of a hybrid photovoltaic-thermoelectric generation (PV-TEG) system is developed. Ten bismuth telluride-based thermoelectric modules are attached to the rear side of a 10 W polycrystalline silicon-based photovoltaic module in order to recover and transform waste thermal energy to usable electrical energy, ultimately cooling the PV cells. The experiment was then carried out for 10 days in Lahore, Pakistan, on both a simple PV module and a hybrid PV-TEG system. The findings revealed that a hybrid system has boosted PV module output power and conversion efficiency. The operating temperature of the PV module in the hybrid system is reduced by 5.5%, from 55 degrees C to 52 degrees C. Due to a drop in temperature and the addition of some recovered energy by thermoelectric modules, the total output power and conversion efficiency of the system increased. The hybrid system's cumulative output power increased by 19% from 8.78 to 10.84 W, compared to the simple PV system. Also, the efficiency of the hybrid PV-TEG system increased from 11.6 to 14%, which is an increase of 17% overall. The results of this research could provide consideration for designing commercial hybrid PV-TEG systems.
|
|
23. |
|
|
24. |
- Pesämaa, Ossi, et al.
(författare)
-
The Impacts of Social Networking and Learning Orientation on Performance
- 2015
-
Ingår i: Journal of Global Marketing. - : Informa UK Limited. - 0891-1762 .- 1528-6975. ; 28:2, s. 113-131
-
Tidskriftsartikel (refereegranskat)abstract
- Organizational learning orientation and social networking have been recognized as drivers of innovativeness and performance. The authors’ study extends existing research on these concepts in several ways. First, they posit that innovativeness mediates the effects of social networking and learning orientation on performance. Second, they propose that environmental munificence moderates the hypothesized relationships. Third, data for the study were collected in Pakistan, which represents a novel and as-yet-unexplored context for this type of research. A structural equation model based on 176 small firms in Pakistan supported most of the hypothesized relationships.
|
|
25. |
|
|