| 1. |
|
|
| 2. |
-
- 2019
-
Tidskriftsartikel (refereegranskat)
|
|
| 3. |
- Beal, Jacob, et al.
(författare)
-
Robust estimation of bacterial cell count from optical density
- 2020
-
Ingår i: Communications Biology. - : Springer Science and Business Media LLC. - 2399-3642. ; 3:1
-
Tidskriftsartikel (refereegranskat)abstract
- Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data.
|
|
| 4. |
- Kristan, Matej, et al.
(författare)
-
The first visual object tracking segmentation VOTS2023 challenge results
- 2023
-
Ingår i: 2023 IEEE/CVF International conference on computer vision workshops (ICCVW). - : Institute of Electrical and Electronics Engineers Inc.. - 9798350307443 - 9798350307450 ; , s. 1788-1810
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking Segmentation VOTS2023 challenge is the eleventh annual tracker benchmarking activity of the VOT initiative. This challenge is the first to merge short-term and long-term as well as single-target and multiple-target tracking with segmentation masks as the only target location specification. A new dataset was created; the ground truth has been withheld to prevent overfitting. New performance measures and evaluation protocols have been created along with a new toolkit and an evaluation server. Results of the presented 47 trackers indicate that modern tracking frameworks are well-suited to deal with convergence of short-term and long-term tracking and that multiple and single target tracking can be considered a single problem. A leaderboard, with participating trackers details, the source code, the datasets, and the evaluation kit are publicly available at the challenge website1
|
|
| 5. |
- Kristan, Matej, et al.
(författare)
-
The Visual Object Tracking VOT2016 Challenge Results
- 2016
-
Ingår i: COMPUTER VISION - ECCV 2016 WORKSHOPS, PT II. - Cham : SPRINGER INT PUBLISHING AG. - 9783319488813 - 9783319488806 ; , s. 777-823
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge VOT2016 aims at comparing short-term single-object visual trackers that do not apply pre-learned models of object appearance. Results of 70 trackers are presented, with a large number of trackers being published at major computer vision conferences and journals in the recent years. The number of tested state-of-the-art trackers makes the VOT 2016 the largest and most challenging benchmark on short-term tracking to date. For each participating tracker, a short description is provided in the Appendix. The VOT2016 goes beyond its predecessors by (i) introducing a new semi-automatic ground truth bounding box annotation methodology and (ii) extending the evaluation system with the no-reset experiment.
|
|
| 6. |
- An, Junghwa, et al.
(författare)
-
Permanent Genetic Resources added to Molecular Ecology Resources Database 1 October 2009-30 November 2009
- 2010
-
Ingår i: Molecular Ecology Resources. - : Wiley. - 1755-098X .- 1755-0998. ; 10:2, s. 404-408
-
Tidskriftsartikel (refereegranskat)abstract
- This article documents the addition of 411 microsatellite marker loci and 15 pairs of Single Nucleotide Polymorphism (SNP) sequencing primers to the Molecular Ecology Resources Database. Loci were developed for the following species: Acanthopagrus schlegeli, Anopheles lesteri, Aspergillus clavatus, Aspergillus flavus, Aspergillus fumigatus, Aspergillus oryzae, Aspergillus terreus, Branchiostoma japonicum, Branchiostoma belcheri, Colias behrii, Coryphopterus personatus, Cynogolssus semilaevis, Cynoglossus semilaevis, Dendrobium officinale, Dendrobium officinale, Dysoxylum malabaricum, Metrioptera roeselii, Myrmeciza exsul, Ochotona thibetana, Neosartorya fischeri, Nothofagus pumilio, Onychodactylus fischeri, Phoenicopterus roseus, Salvia officinalis L., Scylla paramamosain, Silene latifo, Sula sula, and Vulpes vulpes. These loci were cross-tested on the following species: Aspergillus giganteus, Colias pelidne, Colias interior, Colias meadii, Colias eurytheme, Coryphopterus lipernes, Coryphopterus glaucofrenum, Coryphopterus eidolon, Gnatholepis thompsoni, Elacatinus evelynae, Dendrobium loddigesii Dendrobium devonianum, Dysoxylum binectariferum, Nothofagus antarctica, Nothofagus dombeyii, Nothofagus nervosa, Nothofagus obliqua, Sula nebouxii, and Sula variegata. This article also documents the addition of 39 sequencing primer pairs and 15 allele specific primers or probes for Paralithodes camtschaticus.
|
|
| 7. |
- Gao, Zhi xin, et al.
(författare)
-
Progress of passive enhanced heat transfer tubes
- 2017
-
Ingår i: Xiandai Huagong/Modern Chemical Industry. - 0253-4320. ; 37:3, s. 24-30
-
Forskningsöversikt (refereegranskat)abstract
- A review of several typical enhanced heat transfer tubes such as corrugated tube, transversally corrugated tube, twisted tube and spiral fluted tube, is carried out. Compared with smooth wall tube, these enhanced tubes have higher heat exchange capacity and better anti - fouling ability. Besides, the heat transfer efficiency can be promoted to a higher level if the objects that can disturb flow are put in the tubes. However, higher heat transfer efficiency of such enhanced heat transfer tubes can only be achieved under certain conditions. Therefore, new heat transfer tubes that could avoid the formation of mobile dead-zone should be designed to meet the broad applications or facilitate better heat transfer effect.
|
|
| 8. |
- Geng, Xin, et al.
(författare)
-
Challenges and Strategies on Interphasial Regulation for Aqueous Rechargeable Batteries
- 2024
-
Ingår i: Advanced Energy Materials. - : Wiley-VCH Verlagsgesellschaft. - 1614-6832 .- 1614-6840. ; 14:12
-
Forskningsöversikt (refereegranskat)abstract
- The practical application of aqueous rechargeable batteries faces several challenges due to the limited stability window of electrolytes and parasitic side reactions, such as corrosion, passivation, gas evolution, and co-intercalations. The solid electrolyte interphase (SEI) formed at the electrode/electrolyte interface plays a critical role in determining interfacial properties and battery performance. Efforts are being made to develop effective SEIs, functionalize interphase layers, and explore various aqueous hybrid electrolytes that facilitate SEI formation. This review highlights the role of interphasial structures in aqueous batteries. First, common issues encountered by aqueous batteries and specific characteristics of aqueous lithium-ion, sodium-ion, zinc-ion, and aluminum-ion batteries are outlined. Then the tactics used to improve cycle stability of aqueous batteries are introduced and compared and the working principles and key parameters from the context of interphasial modification are discussed. Finally, constructive insights and suggestions for developing high-performance batteries are offered, with a focus on SEI formation and interphase layer design.
|
|
| 9. |
- Han, Hedong, et al.
(författare)
-
Dose-response relationship between dietary magnesium intake, serum magnesium concentration and risk of hypertension : a systematic review and meta-analysis of prospective cohort studies
- 2017
-
Ingår i: Nutrition Journal. - : BioMed Central. - 1475-2891. ; 16
-
Forskningsöversikt (refereegranskat)abstract
- Background: The findings of prospective cohort studies are inconsistent regarding the association between dietary magnesium intake and serum magnesium concentration and the risk of hypertension. We aimed to review the evidence from prospective cohort studies and perform a dose-response meta-analysis to investigate the relationship between dietary magnesium intake and serum magnesium concentrations and the risk of hypertension.Methods: We searched systematically PubMed, EMBASE and the Cochrane Library databases from October 1951 through June 2016. Prospective cohort studies reporting effect estimates with 95% confidence intervals (CIs) for hypertension in more than two categories of dietary magnesium intake and/or serum magnesium concentrations were included. Random-effects models were used to combine the estimated effects.Results: Nine articles (six on dietary magnesium intake, two on serum magnesium concentration and one on both) of ten cohort studies, including 20,119 cases of hypertension and 180,566 participates, were eligible for inclusion in the meta-analysis. We found an inverse association between dietary magnesium intake and the risk of hypertension [relative risk (RR) = 0.92; 95% CI: 0.86, 0.98] comparing the highest intake group with the lowest. A 100 mg/day increment in magnesium intake was associated with a 5% reduction in the risk of hypertension (RR = 0.95; 95% CI: 0.90, 1.00). The association of serum magnesium concentration with the risk of hypertension was marginally significant (RR = 0.91; 95% CI: 0.80, 1.02).Conclusions: Current evidence supports the inverse dose-response relationship between dietary magnesium intake and the risk of hypertension. However, the evidence about the relationship between serum magnesium concentration and hypertension is limited.
|
|
| 10. |
- Haycock, Philip C., et al.
(författare)
-
Association Between Telomere Length and Risk of Cancer and Non-Neoplastic Diseases A Mendelian Randomization Study
- 2017
-
Ingår i: JAMA Oncology. - : American Medical Association. - 2374-2437 .- 2374-2445. ; 3:5, s. 636-651
-
Tidskriftsartikel (refereegranskat)abstract
- IMPORTANCE: The causal direction and magnitude of the association between telomere length and incidence of cancer and non-neoplastic diseases is uncertain owing to the susceptibility of observational studies to confounding and reverse causation. OBJECTIVE: To conduct a Mendelian randomization study, using germline genetic variants as instrumental variables, to appraise the causal relevance of telomere length for risk of cancer and non-neoplastic diseases. DATA SOURCES: Genomewide association studies (GWAS) published up to January 15, 2015. STUDY SELECTION: GWAS of noncommunicable diseases that assayed germline genetic variation and did not select cohort or control participants on the basis of preexisting diseases. Of 163 GWAS of noncommunicable diseases identified, summary data from 103 were available. DATA EXTRACTION AND SYNTHESIS: Summary association statistics for single nucleotide polymorphisms (SNPs) that are strongly associated with telomere length in the general population. MAIN OUTCOMES AND MEASURES: Odds ratios (ORs) and 95% confidence intervals (CIs) for disease per standard deviation (SD) higher telomere length due to germline genetic variation. RESULTS: Summary data were available for 35 cancers and 48 non-neoplastic diseases, corresponding to 420 081 cases (median cases, 2526 per disease) and 1 093 105 controls (median, 6789 per disease). Increased telomere length due to germline genetic variation was generally associated with increased risk for site-specific cancers. The strongest associations (ORs [ 95% CIs] per 1-SD change in genetically increased telomere length) were observed for glioma, 5.27 (3.15-8.81); serous low-malignant-potential ovarian cancer, 4.35 (2.39-7.94); lung adenocarcinoma, 3.19 (2.40-4.22); neuroblastoma, 2.98 (1.92-4.62); bladder cancer, 2.19 (1.32-3.66); melanoma, 1.87 (1.55-2.26); testicular cancer, 1.76 (1.02-3.04); kidney cancer, 1.55 (1.08-2.23); and endometrial cancer, 1.31 (1.07-1.61). Associations were stronger for rarer cancers and at tissue sites with lower rates of stem cell division. There was generally little evidence of association between genetically increased telomere length and risk of psychiatric, autoimmune, inflammatory, diabetic, and other non-neoplastic diseases, except for coronary heart disease (OR, 0.78 [ 95% CI, 0.67-0.90]), abdominal aortic aneurysm (OR, 0.63 [ 95% CI, 0.49-0.81]), celiac disease (OR, 0.42 [ 95% CI, 0.28-0.61]) and interstitial lung disease (OR, 0.09 [ 95% CI, 0.05-0.15]). CONCLUSIONS AND RELEVANCE: It is likely that longer telomeres increase risk for several cancers but reduce risk for some non-neoplastic diseases, including cardiovascular diseases.
|
|
| 11. |
- Jiang, Bing-Xin, et al.
(författare)
-
Fabrication and bonding of In bumps on Micro-LED with 8 μ m pixel pitch
- 2024
-
Ingår i: ENGINEERING RESEARCH EXPRESS. - 2631-8695. ; 6:2
-
Tidskriftsartikel (refereegranskat)abstract
- Indium (In) is currently used to fabricate metal bumps on micro-light-emitting diode (Micro-LED) chips due to its excellent physical properties. However, as Micro-LED pixel size and pitch decrease, achieving high-quality In bumps on densely packed Micro-LED chips often presents more challenges. This paper describes the process of fabricating In bumps on micro-LEDs using thermal evaporation, highlighting an issue where In tends to grow laterally within the photoresist pattern, ultimately blocking the pattern and resulting in undersized and poorly dense In bumps on the Micro-LED chip. To address this issue, we conducted numerous experiments to study the height variation of In bumps within a range of photoresist aperture sizes (3 mu m -7 mu m) under two different resist thickness conditions (3.8 mu m and 4.8 mu m). The results showed that the resist thickness had a certain effect on the height of In bumps on the Micro-LED chip electrodes. Moreover, we found that, with the photoresist pattern size increasing under constant resist thickness conditions, the height and quality of the bumps significantly improved. Based on this finding, we rationalized the adjustment of the photoresist pattern size within a limited emission platform range to compensate for the height difference of In bumps caused by different resist thicknesses between the cathode and anode regions. Consequently, well-shaped and dense In bumps with a maximum height of up to 4.4 mu m were fabricated on 8 mu m pitch Micro-LED chips. Afterwards, we bonded the Micro-LED chip with indium bumps to the CMOS chip, and we found that we could successfully control the CMOS chip to drive the Micro-LED chip to display specific characters through the Flexible Printed Circuit (FPC). This work is of significant importance for the fabrication of In bumps on Micro-LED chips with pitches below 10 mu m and subsequent bonding processes.
|
|
| 12. |
- Jin, Pengkang, et al.
(författare)
-
A study on the reactivity characteristics of dissolved effluent organic matter (EfOM) from municipal wastewater treatment plant during ozonation
- 2016
-
Ingår i: Water Research. - : Elsevier BV. - 0043-1354 .- 1879-2448. ; 88, s. 643-652
-
Tidskriftsartikel (refereegranskat)abstract
- The reactivity of dissolved effluent organic matter (EfOM) in the process of ozonation was examined. Under different ozone dosages (0.42 +/- 0.09, 0.98 +/- 0.11 and 2.24 +/- 0.17 mgO(3)/mg DOC), the EfOM before and after ozonation could be classified into four fractions according to their hydrophobicities. By ozonation, the hydrophobic fractions, especially hydrophobic acid (HOA) and hydrophobic neutral (HON), were found to undergo a process of transformation into hydrophilic fractions (HI), of which the HOA were first transformed into HON, and then the majority of the HON fraction was later converted to HI by further ozonation. It was noticeable that after ozonation, the fluorescence intensity in the humic-like and protein-like regions decreased as indicated by the excitation and emission matrix (EEM) spectra for the hydrophobic fractions. By coupling the EEM spectra with the molecular size analysis using high performance size exclusion chromatography (HPSEC), the difference between the characteristic distributions of the humic-like and protein-like fluorophores were further revealed. It could thus be extrapolated that ozone might have preferentially reacted with the protein-like hydrophobic fraction with molecular weight (MW) less than 100 kDa. Moreover, by X-ray photoelectron spectroscopy (XPS) analysis, it was identified that with increasing ozone dosage (from 0 to 2.24 +/- 0.17 mgO(3)/mg DOC), the aromaticity of HON decreased dramatically, while aliphatics and ketones increased especially at the low ozone dose (0.42 +/- 0.09 mgO(3)/mg DOC). Of the EfOM fractions, the HON fraction would have a higher content of electron enriched aromatics which could preferentially react with ozone rather than the HOA fraction.
|
|
| 13. |
- Jin, Ying-Hui, et al.
(författare)
-
Chemoprophylaxis, diagnosis, treatments, and discharge management of COVID-19 : An evidence-based clinical practice guideline (updated version)
- 2020
-
Ingår i: Military Medical Research. - : Springer Science and Business Media LLC. - 2054-9369. ; 7:1
-
Tidskriftsartikel (refereegranskat)abstract
- The novel severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is the cause of a rapidly spreading illness, coronavirus disease 2019 (COVID-19), affecting more than seventeen million people around the world. Diagnosis and treatment guidelines for clinicians caring for patients are needed. In the early stage, we have issued "A rapid advice guideline for the diagnosis and treatment of 2019 novel coronavirus (2019-nCoV) infected pneumonia (standard version)"; now there are many direct evidences emerged and may change some of previous recommendations and it is ripe for develop an evidence-based guideline. We formed a working group of clinical experts and methodologists. The steering group members proposed 29 questions that are relevant to the management of COVID-19 covering the following areas: chemoprophylaxis, diagnosis, treatments, and discharge management. We searched the literature for direct evidence on the management of COVID-19, and assessed its certainty generated recommendations using the Grading of Recommendations, Assessment, Development and Evaluation (GRADE) approach. Recommendations were either strong or weak, or in the form of ungraded consensus-based statement. Finally, we issued 34 statements. Among them, 6 were strong recommendations for, 14 were weak recommendations for, 3 were weak recommendations against and 11 were ungraded consensus-based statement. They covered topics of chemoprophylaxis (including agents and Traditional Chinese Medicine (TCM) agents), diagnosis (including clinical manifestations, reverse transcription-polymerase chain reaction (RT-PCR), respiratory tract specimens, IgM and IgG antibody tests, chest computed tomography, chest x-ray, and CT features of asymptomatic infections), treatments (including lopinavir-ritonavir, umifenovir, favipiravir, interferon, remdesivir, combination of antiviral drugs, hydroxychloroquine/chloroquine, interleukin-6 inhibitors, interleukin-1 inhibitors, glucocorticoid, qingfei paidu decoction, lianhua qingwen granules/capsules, convalescent plasma, lung transplantation, invasive or noninvasive ventilation, and extracorporeal membrane oxygenation (ECMO)), and discharge management (including discharge criteria and management plan in patients whose RT-PCR retesting shows SARS-CoV-2 positive after discharge). We also created two figures of these recommendations for the implementation purpose. We hope these recommendations can help support healthcare workers caring for COVID-19 patients.
|
|
| 14. |
- Jin, Zhi-jiang, et al.
(författare)
-
A parametric study of hydrodynamic cavitation inside globe valves
- 2018
-
Ingår i: Journal of Fluids Engineering. - : ASME International. - 0098-2202 .- 1528-901X. ; 140:3
-
Tidskriftsartikel (refereegranskat)abstract
- Hydrodynamic cavitation that occurs inside valves not only increases the energy consumption burden of the whole piping system but also leads to severe damages to the valve body and the piping system with a large economic loss. In this paper, in order to reduce the hydrodynamic cavitation inside globe valves, effects of valve body geometrical parameters including bending radius, deviation distance, and arc curvature linked to in/ export parts on hydrodynamic cavitation are investigated by using a cavitation model. To begin with, the numerical model is compared with similar works to check its accuracy. Then, the cavitation index and the total vapor volume are predicted. The results show that vapor primarily appears around the valve seat and connecting downstream pipes. The hydrodynamic cavitation does not occur under a small inlet velocity, a large bending radius, and a large deviation distance. Cavitation intensity decreases with the increase of the bending radius, the deviation distance, and the arc curvature linked to in/export parts. This indicates that valve geometrical parameters should be chosen as large as possible, while the maximal fluid velocity should be limited. This work is of significance for hydrodynamic cavitation or globe valve design.
|
|
| 15. |
- Jin, Zhi Jiang, et al.
(författare)
-
Cavitating flow through a micro-orifice
- 2019
-
Ingår i: Micromachines. - : MDPI AG. - 2072-666X. ; 10:3
-
Tidskriftsartikel (refereegranskat)abstract
- Microfluidic systems have witnessed rapid development in recent years. As one of the most common structures, the micro-orifice is always included inside microfluidic systems. Hydrodynamic cavitation in the micro-orifice has been experimentally discovered and is harmful to microfluidic systems. This paper investigates cavitating flow through a micro-orifice. A rectangular micro-orifice with a l/d ratio varying from 0.25 to 4 was selected and the pressure difference between the inlet and outlet varied from 50 to 300 kPa. Results show that cavitation intensity increased with an increase in pressure difference. Decreasing exit pressure led to a decrease in cavitation number and cavitation could be prevented by increasing the exit pressure. In addition, the vapor cavity also increased with an increase in pressure difference and l/d ratio. Results also show the pressure ratio at cavitation inception was 1.8 when l/d was above 0.5 and the cavitation number almost remained constant when l/d was larger than 2. Moreover, there was an apparent difference in cavitation number depending on whether l/d was larger than 1.
|
|
| 16. |
- Jin, Zhi Jiang, et al.
(författare)
-
Computational fluid dynamics analysis on orifice structure inside valve core of pilot-control angle globe valve
- 2018
-
Ingår i: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. - : SAGE Publications. - 0954-4062 .- 2041-2983. ; 232:13, s. 2419-2429
-
Tidskriftsartikel (refereegranskat)abstract
- A novel pilot-control angle globe valve is proposed, and it has an obvious advantage of energy conservation during its opening and closing process. In pilot-control angle globe valve, the opening and closing forces are related to the orifice located inside the valve core. In this paper, the effects of orifice diameter are thoroughly studied under different working conditions such as valve core displacements and inlet velocities. To begin with, the numerical model is validated by comparing similar angle valves, and then the flow and loss coefficients under different orifice diameters are discussed. It is found that the effects of orifice diameter on force acting on valve core depend on valve core displacement and inlet velocity. Thus different valve core displacements and inlet velocities combined with different orifice diameters are further studied. It is also found that when the orifice diameter is larger than 12 mm, pilot-control angle globe valve cannot be used under small inlet velocity or large valve core displacement. In addition, formulas to calculate forces on valve core are proposed for further orifice design. This work can be referred in process industries especially in a piping system with orifice plates or globe valves.
|
|
| 17. |
- Jin, Zhi jiang, et al.
(författare)
-
Effects of pitch and corrugation depth on heat transfer characteristics in six-start spirally corrugated tube
- 2017
-
Ingår i: International Journal of Heat and Mass Transfer. - : Elsevier BV. - 0017-9310. ; 108, s. 1011-1025
-
Tidskriftsartikel (refereegranskat)abstract
- Spirally corrugated tube is one of the most important parts of coaxial heat exchangers. It can greatly improve the heat transfer efficiency of heat exchangers. Here, a novel spirally corrugated tube with six-start is proposed. However, up to now, there is little literature about the heat transfer performance and flow field of this novel six-start spirally corrugated tube. In this paper, the effects of geometric parameters (pitch p, corrugation depth e), Reynolds number Re and fluid properties on the heat transfer performances are investigated based on the validated numerical model. The results show that with the increasing of pitch p, both the heat transfer coefficient h and Nusselt number Nu decrease gradually. Meanwhile, with the increasing of corrugation depth e, both the secondary flow velocity vxy and the vorticity of longitudinal vortex increase gradually. Moreover, under the same working condition, the heat transfer performances of the six-start spirally corrugated tube are affected by both the working medium and Reynolds number. Finally, a criterion correlation for heat transfer calculation in the six-start spirally corrugated tube is proposed and validated to be reliable and suitable. This work can reveal the enhanced heat transfer mechanism of the six-start spirally corrugated tube and benefit the further research on heat transfer characteristics of multi-start spirally corrugated tube or other related devices.
|
|
| 18. |
- Jin, Zhi-jiang, et al.
(författare)
-
Pressure Drop Analysis of Pilot-Control Globe Valve With Different Structural Parameters
- 2017
-
Ingår i: Journal of Fluids Engineering. - : ASME International. - 0098-2202 .- 1528-901X. ; 139:9
-
Tidskriftsartikel (refereegranskat)abstract
- Pilot-control globe valve (PCGV) can use the pressure drop caused by fluid flowing through the orifice located at valve core bottom to open or close the main valve using a small pilot valve. In this paper, computational fluid dynamics (CFD) method is adopted to analyze the pressure drop before and after valve core of PCGV and minor loss of orifice under different structural parameters and inlet velocities, and the simulation results show a good agreement with the experimental results. It turns out that the valve diameters, orifice diameters, and pilot pipe diameters have great influences on the pressure drop and the loss coefficient. Moreover, an expression is proposed which can be used to calculate minor loss coefficient, then to estimate the pressure drop and driving force of a PCGV within limited conditions. This paper can be referenced as guidance for deciding the dimension of structural parameters and spring stiffness during design process of a PCGV.
|
|
| 19. |
- Kristan, Matej, et al.
(författare)
-
The Visual Object Tracking VOT2015 challenge results
- 2015
-
Ingår i: Proceedings 2015 IEEE International Conference on Computer Vision Workshops ICCVW 2015. - : IEEE. - 9780769557205 ; , s. 564-586
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge 2015, VOT2015, aims at comparing short-term single-object visual trackers that do not apply pre-learned models of object appearance. Results of 62 trackers are presented. The number of tested trackers makes VOT 2015 the largest benchmark on short-term tracking to date. For each participating tracker, a short description is provided in the appendix. Features of the VOT2015 challenge that go beyond its VOT2014 predecessor are: (i) a new VOT2015 dataset twice as large as in VOT2014 with full annotation of targets by rotated bounding boxes and per-frame attribute, (ii) extensions of the VOT2014 evaluation methodology by introduction of a new performance measure. The dataset, the evaluation kit as well as the results are publicly available at the challenge website(1).
|
|
| 20. |
- Kristanl, Matej, et al.
(författare)
-
The Seventh Visual Object Tracking VOT2019 Challenge Results
- 2019
-
Ingår i: 2019 IEEE/CVF INTERNATIONAL CONFERENCE ON COMPUTER VISION WORKSHOPS (ICCVW). - : IEEE COMPUTER SOC. - 9781728150239 ; , s. 2206-2241
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge VOT2019 is the seventh annual tracker benchmarking activity organized by the VOT initiative. Results of 81 trackers are presented; many are state-of-the-art trackers published at major computer vision conferences or in journals in the recent years. The evaluation included the standard VOT and other popular methodologies for short-term tracking analysis as well as the standard VOT methodology for long-term tracking analysis. The VOT2019 challenge was composed of five challenges focusing on different tracking domains: (i) VOT-ST2019 challenge focused on short-term tracking in RGB, (ii) VOT-RT2019 challenge focused on "real-time" short-term tracking in RGB, (iii) VOT-LT2019 focused on long-term tracking namely coping with target disappearance and reappearance. Two new challenges have been introduced: (iv) VOT-RGBT2019 challenge focused on short-term tracking in RGB and thermal imagery and (v) VOT-RGBD2019 challenge focused on long-term tracking in RGB and depth imagery. The VOT-ST2019, VOT-RT2019 and VOT-LT2019 datasets were refreshed while new datasets were introduced for VOT-RGBT2019 and VOT-RGBD2019. The VOT toolkit has been updated to support both standard short-term, long-term tracking and tracking with multi-channel imagery. Performance of the tested trackers typically by far exceeds standard baselines. The source code for most of the trackers is publicly available from the VOT page. The dataset, the evaluation kit and the results are publicly available at the challenge website(1).
|
|
| 21. |
- Qian, Jin Yuan, et al.
(författare)
-
Effects of dimple cone angles on heat transfer and pressure drop in a dimple jacketed heat exchanger
- 2017
-
Ingår i: Proceedings of CHT-17 ICHMT International Symposium on Advances in Computational Heat Transfer, 2017. - 9781567004618 ; , s. 2013-2020
-
Konferensbidrag (refereegranskat)abstract
- A Dimple Jacket Heat Exchanger (DJHE) is designed for the Chemical Post-Processing Integrated Equipment (CPPIE) to enhance the heat transfer performance during chemical reaction, crystallization and drying processes. In this paper, a 3D model of a DJHE is established. Dynamic variation of temperature inside the DJHE is compared with experimental data to validate the accuracy of the numerical method. Then, by choosing one dimple from the whole DJHE as the research object, the effects of different dimple cone angles on heat transfer and pressure drop characteristics are analyzed with the validated method. The results show that the dimple cone angle has an obvious effect on the heat transfer and pressure drop performance. This work can reduce the uncertain design of DJHE, and it can also be referred by similar research works on dimple surfaces.
|
|
| 22. |
- Qian, Jin Yuan, et al.
(författare)
-
Experimental and numerical analysis of spring stiffness on flow and valve core movement in pilot control globe valve
- 2017
-
Ingår i: International Journal of Hydrogen Energy. - : Elsevier BV. - 0360-3199. ; 42:27, s. 17192-17201
-
Tidskriftsartikel (refereegranskat)abstract
- Valves are widely used for fluid flow control, not only for conventional fluid like water, gas and oil, but also for hydrogen under high pressure and so forth. Under these new conditions, the response time and energy consumption of valves are closely related to the whole performance of the piping system. Pilot-control globe valve (PCGV) is a novel quick response valve, which can utilize the pressure difference before and after the valve core to control the open/close states of the main valve. In this paper, the effects of spring stiffness inside PCGV on the flow and the valve core movement are carried out, respectively. To begin with, the experimental setup is introduces and the 3D numerical model is established. The simulation is carried out in software FLUENT with RNG k-ε turbulence model, User Defined Function method and dynamic mesh regeneration methods under transmit state. Then, a comparison of steady valve core displacements between experiment and simulation is carried out. After that, the effects of spring stiffness on flow characteristics, valve core movement and response times during opening and closing periods are presented. Finally, a spring chosen correction equation is proposed. This work can benefit the further design work of PCGVs or similar valves with springs, and it can be also referred by someone dealing with novel control valves design or flow control issues.
|
|
| 23. |
|
|
| 24. |
- Qian, Yan, et al.
(författare)
-
Quantification for total demethylation potential of environmental samples utilizing the EGFP reporter gene
- 2016
-
Ingår i: Journal of Hazardous Materials. - : Elsevier. - 0304-3894 .- 1873-3336. ; 306, s. 278-285
-
Tidskriftsartikel (refereegranskat)abstract
- Abstract The demethylation potential of pollutants is arguably an innate component of their toxicity in environmental samples. A method was developed for determining the total demethylation potential of food samples (TDQ). The demethylation epigenetic toxicity was determined using the Hep G2 cell line transfected with pEGFP-C3 plasmids containing a methylated promoter of the EGFP reporter gene. The total demethylation potential of the sample extracts (the 5-AZA-CdR demethylation toxic equivalency) can be quantified within one week by using a standard curve of the 5-AZA-CdR demethylation agent. To explore the applicability of TDQ for environmental samples, 17 groundwater samples were collected from heavy polluted Kuihe river and the total demethylation potentials of the sample extracts were measured successfully. Meaningful demethylation toxic equivalencies ranging from 0.00050 to 0.01747 μM were found in all groundwater sample extracts. Among 19 kinds of inorganic substance, As and Cd played important roles for individual contribution to the total demethylation epigenetic toxicity. The TDQ assay is reliable and fast for quantifying the DNA demethylation potential of environmental sample extracts, which may improve epigenetic toxicity evaluations for human risk assessment, and the consistent consuming of groundwater alongside the Kuihe river pose unexpected epigenetic health risk to the local residents.
|
|
| 25. |
- Teslovich, Tanya M., et al.
(författare)
-
Biological, clinical and population relevance of 95 loci for blood lipids
- 2010
-
Ingår i: Nature. - : Springer Science and Business Media LLC. - 0028-0836 .- 1476-4687. ; 466:7307, s. 707-713
-
Tidskriftsartikel (refereegranskat)abstract
- Plasma concentrations of total cholesterol, low-density lipoprotein cholesterol, high-density lipoprotein cholesterol and triglycerides are among the most important risk factors for coronary artery disease (CAD) and are targets for therapeutic intervention. We screened the genome for common variants associated with plasma lipids in >100,000 individuals of European ancestry. Here we report 95 significantly associated loci (P<5 x 10(-8)), with 59 showing genome-wide significant association with lipid traits for the first time. The newly reported associations include single nucleotide polymorphisms (SNPs) near known lipid regulators (for example, CYP7A1, NPC1L1 and SCARB1) as well as in scores of loci not previously implicated in lipoprotein metabolism. The 95 loci contribute not only to normal variation in lipid traits but also to extreme lipid phenotypes and have an impact on lipid traits in three non-European populations (East Asians, South Asians and African Americans). Our results identify several novel loci associated with plasma lipids that are also associated with CAD. Finally, we validated three of the novel genes-GALNT2, PPP1R3B and TTC39B-with experiments in mouse models. Taken together, our findings provide the foundation to develop a broader biological understanding of lipoprotein metabolism and to identify new therapeutic opportunities for the prevention of CAD.
|
|
