1. |
- Fenstermacher, M.E., et al.
(author)
-
DIII-D research advancing the physics basis for optimizing the tokamak approach to fusion energy
- 2022
-
In: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 62:4
-
Journal article (peer-reviewed)abstract
- DIII-D physics research addresses critical challenges for the operation of ITER and the next generation of fusion energy devices. This is done through a focus on innovations to provide solutions for high performance long pulse operation, coupled with fundamental plasma physics understanding and model validation, to drive scenario development by integrating high performance core and boundary plasmas. Substantial increases in off-axis current drive efficiency from an innovative top launch system for EC power, and in pressure broadening for Alfven eigenmode control from a co-/counter-I p steerable off-axis neutral beam, all improve the prospects for optimization of future long pulse/steady state high performance tokamak operation. Fundamental studies into the modes that drive the evolution of the pedestal pressure profile and electron vs ion heat flux validate predictive models of pedestal recovery after ELMs. Understanding the physics mechanisms of ELM control and density pumpout by 3D magnetic perturbation fields leads to confident predictions for ITER and future devices. Validated modeling of high-Z shattered pellet injection for disruption mitigation, runaway electron dissipation, and techniques for disruption prediction and avoidance including machine learning, give confidence in handling disruptivity for future devices. For the non-nuclear phase of ITER, two actuators are identified to lower the L-H threshold power in hydrogen plasmas. With this physics understanding and suite of capabilities, a high poloidal beta optimized-core scenario with an internal transport barrier that projects nearly to Q = 10 in ITER at ∼8 MA was coupled to a detached divertor, and a near super H-mode optimized-pedestal scenario with co-I p beam injection was coupled to a radiative divertor. The hybrid core scenario was achieved directly, without the need for anomalous current diffusion, using off-axis current drive actuators. Also, a controller to assess proximity to stability limits and regulate β N in the ITER baseline scenario, based on plasma response to probing 3D fields, was demonstrated. Finally, innovative tokamak operation using a negative triangularity shape showed many attractive features for future pilot plant operation.
|
|
2. |
|
|
3. |
|
|
4. |
|
|
5. |
- Fomalont, E. B., et al.
(author)
-
THE 2014 ALMA LONG BASELINE CAMPAIGN: AN OVERVIEW
- 2015
-
In: Astrophysical Journal Letters. - : American Astronomical Society. - 2041-8213 .- 2041-8205. ; 808:1
-
Journal article (peer-reviewed)abstract
- A major goal of the Atacama Large Millimeter/submillimeter Array (ALMA) is to make accurate images with resolutions of tens of milliarcseconds, which at submillimeter (submm) wavelengths requires baselines up to similar to 15 km. To develop and test this capability, a Long Baseline Campaign (LBC) was carried out from 2014 September to late November, culminating in end-to-end observations, calibrations, and imaging of selected Science Verification (SV) targets. This paper presents an overview of the campaign and its main results, including an investigation of the short-term coherence properties and systematic phase errors over the long baselines at the ALMA site, a summary of the SV targets and observations, and recommendations for science observing strategies at long baselines. Deep ALMA images of the quasar 3C 138 at 97 and 241 GHz are also compared to VLA 43 GHz results, demonstrating an agreement at a level of a few percent. As a result of the extensive program of LBC testing, the highly successful SV imaging at long baselines achieved angular resolutions as fine as 19 mas at similar to 350 GHz. Observing with ALMA on baselines of up to 15 km is now possible, and opens up new parameter space for submm astronomy.
|
|
6. |
- Reimerdes, H., et al.
(author)
-
Overview of the TCV tokamak experimental programme
- 2022
-
In: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 62:4
-
Journal article (peer-reviewed)abstract
- The tokamak a configuration variable (TCV) continues to leverage its unique shaping capabilities, flexible heating systems and modern control system to address critical issues in preparation for ITER and a fusion power plant. For the 2019-20 campaign its configurational flexibility has been enhanced with the installation of removable divertor gas baffles, its diagnostic capabilities with an extensive set of upgrades and its heating systems with new dual frequency gyrotrons. The gas baffles reduce coupling between the divertor and the main chamber and allow for detailed investigations on the role of fuelling in general and, together with upgraded boundary diagnostics, test divertor and edge models in particular. The increased heating capabilities broaden the operational regime to include T (e)/T (i) similar to 1 and have stimulated refocussing studies from L-mode to H-mode across a range of research topics. ITER baseline parameters were reached in type-I ELMy H-modes and alternative regimes with 'small' (or no) ELMs explored. Most prominently, negative triangularity was investigated in detail and confirmed as an attractive scenario with H-mode level core confinement but an L-mode edge. Emphasis was also placed on control, where an increased number of observers, actuators and control solutions became available and are now integrated into a generic control framework as will be needed in future devices. The quantity and quality of results of the 2019-20 TCV campaign are a testament to its successful integration within the European research effort alongside a vibrant domestic programme and international collaborations.
|
|
7. |
- Chatzikonstantinou, T, et al.
(author)
-
COVID-19 severity and mortality in patients with CLL: an update of the international ERIC and Campus CLL study
- 2021
-
In: Leukemia. - : Springer Science and Business Media LLC. - 1476-5551 .- 0887-6924. ; 3635:312, s. 3444-3454
-
Journal article (peer-reviewed)abstract
- Patients with chronic lymphocytic leukemia (CLL) may be more susceptible to Coronavirus disease 2019 (COVID-19) due to age, disease, and treatment-related immunosuppression. We aimed to assess risk factors of outcome and elucidate the impact of CLL-directed treatments on the course of COVID-19. We conducted a retrospective, international study, collectively including 941 patients with CLL and confirmed COVID-19. Data from the beginning of the pandemic until March 16, 2021, were collected from 91 centers. The risk factors of case fatality rate (CFR), disease severity, and overall survival (OS) were investigated. OS analysis was restricted to patients with severe COVID-19 (definition: hospitalization with need of oxygen or admission into an intensive care unit). CFR in patients with severe COVID-19 was 38.4%. OS was inferior for patients in all treatment categories compared to untreated (p < 0.001). Untreated patients had a lower risk of death (HR = 0.54, 95% CI:0.41–0.72). The risk of death was higher for older patients and those suffering from cardiac failure (HR = 1.03, 95% CI:1.02–1.04; HR = 1.79, 95% CI:1.04–3.07, respectively). Age, CLL-directed treatment, and cardiac failure were significant risk factors of OS. Untreated patients had a better chance of survival than those on treatment or recently treated.
|
|
8. |
- Bručas, Rimantas, et al.
(author)
-
Magnetic and transport properties of Ni81Fe19/Al2O3 granular multilayers approaching the superparamagnetic limit
- 2007
-
In: Journal of Applied Physics. - : AIP Publishing. - 0021-8979 .- 1089-7550. ; 101:7, s. 073907-
-
Journal article (peer-reviewed)abstract
- The magnetic and transport properties of Ni81Fe 19/Al2O3 granular multilayer films were studied in relation to their structural properties as the nominal thickness t of the permalloy (Ni81Fe19) layer was varied near the percolation limit: in the range of 8≤t≤ 16 Å while keeping the nominal thickness of the Al2O3 layers constant at 16 Å. A good structural quality of the multilayers was demonstrated by low angle x-ray reflectivity measurements, and transmission electron microscopy showed the transition from continuous permalloy layers separated by aluminium oxide layers for t= 16 Å to metal grains dispersed in the insulator at t=8 Å. Magnetization measurements showed the gradual transition from ferromagnetic layers to superparamagnetic clusters and grains that successively become blocked as the temperature decreases. A strong correlation between transport and structural properties was observed in the temperature (T) dependence of the electrical resistance measured with the current in the plane in the range of 2 ≤T≤300 K: a gradual change of behavior from continuous permalloy layers with conducting interlayer connections for t=16 Å. to isolated permalloy grains in a dielectric for the film with t= 10 Å. The percolation occurs between 12 and 10 Å, as deduced both from the magnetic and resistive properties. The discontinuous metal films were analyzed within models for thermally assisted tunneling, yielding estimates of the tunneling barrier for intralayer conduction of about 20 meV for t= 10 Å. A significant magnetic field dependence of the resistance increasing with decreasing temperature was observed in all samples.
|
|
9. |
|
|
10. |
- Van Kampen, M., et al.
(author)
-
On the realization of artificial XY spin chains
- 2005
-
In: Journal of Physics. - 0953-8984 .- 1361-648X. ; 17:2, s. L27-L33
-
Journal article (peer-reviewed)abstract
- Spin chains are the most elementary entities in the study of magnetic ordering behavior. The authors describe a route toward the realization of artificial XY spin chains. Using thin-film deposition and e-beam lithog., 300 and 550 nm diam. pillars consisting of alternating disks of permalloy and Al2O3 were made. Shape anisotropy forces the magnetization in plane, creating a chain of two-dimensional magnetic moments →i. The disks couple to each other by their dipolar stray fields, resulting in an interaction Jij→i·→j, with Jij the coupling between disks i and j. This form closely resembles a chain of xy spins, coupled by effective interactions Jij. The authors present a magnetic characterization of the pillars, and compare the results with model calcns. Also, spin dynamics and ordering phenomena are addressed.
|
|