| 1. |
- Ruilope, LM, et al.
(författare)
-
Design and Baseline Characteristics of the Finerenone in Reducing Cardiovascular Mortality and Morbidity in Diabetic Kidney Disease Trial
- 2019
-
Ingår i: American journal of nephrology. - : S. Karger AG. - 1421-9670 .- 0250-8095. ; 50:5, s. 345-356
-
Tidskriftsartikel (refereegranskat)abstract
- <b><i>Background:</i></b> Among people with diabetes, those with kidney disease have exceptionally high rates of cardiovascular (CV) morbidity and mortality and progression of their underlying kidney disease. Finerenone is a novel, nonsteroidal, selective mineralocorticoid receptor antagonist that has shown to reduce albuminuria in type 2 diabetes (T2D) patients with chronic kidney disease (CKD) while revealing only a low risk of hyperkalemia. However, the effect of finerenone on CV and renal outcomes has not yet been investigated in long-term trials. <b><i>Patients and</i></b> <b><i>Methods:</i></b> The Finerenone in Reducing CV Mortality and Morbidity in Diabetic Kidney Disease (FIGARO-DKD) trial aims to assess the efficacy and safety of finerenone compared to placebo at reducing clinically important CV and renal outcomes in T2D patients with CKD. FIGARO-DKD is a randomized, double-blind, placebo-controlled, parallel-group, event-driven trial running in 47 countries with an expected duration of approximately 6 years. FIGARO-DKD randomized 7,437 patients with an estimated glomerular filtration rate ≥25 mL/min/1.73 m<sup>2</sup> and albuminuria (urinary albumin-to-creatinine ratio ≥30 to ≤5,000 mg/g). The study has at least 90% power to detect a 20% reduction in the risk of the primary outcome (overall two-sided significance level α = 0.05), the composite of time to first occurrence of CV death, nonfatal myocardial infarction, nonfatal stroke, or hospitalization for heart failure. <b><i>Conclusions:</i></b> FIGARO-DKD will determine whether an optimally treated cohort of T2D patients with CKD at high risk of CV and renal events will experience cardiorenal benefits with the addition of finerenone to their treatment regimen. Trial Registration: EudraCT number: 2015-000950-39; ClinicalTrials.gov identifier: NCT02545049.
|
|
| 2. |
- Rauer, H., et al.
(författare)
-
The PLATO 2.0 mission
- 2014
-
Ingår i: Experimental astronomy. - : Springer Science and Business Media LLC. - 0922-6435 .- 1572-9508. ; 38:1-2, s. 249-330
-
Tidskriftsartikel (refereegranskat)abstract
- PLATO 2.0 has recently been selected for ESA's M3 launch opportunity (2022/24). Providing accurate key planet parameters (radius, mass, density and age) in statistical numbers, it addresses fundamental questions such as: How do planetary systems form and evolve? Are there other systems with planets like ours, including potentially habitable planets? The PLATO 2.0 instrument consists of 34 small aperture telescopes (32 with 25 s readout cadence and 2 with 2.5 s cadence) providing a wide field-of-view (2232 deg(2)) and a large photometric magnitude range (4-16 mag). It focuses on bright (4-11 mag) stars in wide fields to detect and characterize planets down to Earth-size by photometric transits, whose masses can then be determined by ground-based radial-velocity follow-up measurements. Asteroseismology will be performed for these bright stars to obtain highly accurate stellar parameters, including masses and ages. The combination of bright targets and asteroseismology results in high accuracy for the bulk planet parameters: 2 %, 4-10 % and 10 % for planet radii, masses and ages, respectively. The planned baseline observing strategy includes two long pointings (2-3 years) to detect and bulk characterize planets reaching into the habitable zone (HZ) of solar-like stars and an additional step-and-stare phase to cover in total about 50 % of the sky. PLATO 2.0 will observe up to 1,000,000 stars and detect and characterize hundreds of small planets, and thousands of planets in the Neptune to gas giant regime out to the HZ. It will therefore provide the first large-scale catalogue of bulk characterized planets with accurate radii, masses, mean densities and ages. This catalogue will include terrestrial planets at intermediate orbital distances, where surface temperatures are moderate. Coverage of this parameter range with statistical numbers of bulk characterized planets is unique to PLATO 2.0. The PLATO 2.0 catalogue allows us to e. g.: - complete our knowledge of planet diversity for low-mass objects, - correlate the planet mean density-orbital distance distribution with predictions from planet formation theories,- constrain the influence of planet migration and scattering on the architecture of multiple systems, and - specify how planet and system parameters change with host star characteristics, such as type, metallicity and age. The catalogue will allow us to study planets and planetary systems at different evolutionary phases. It will further provide a census for small, low-mass planets. This will serve to identify objects which retained their primordial hydrogen atmosphere and in general the typical characteristics of planets in such a low-mass, low-density range. Planets detected by PLATO 2.0 will orbit bright stars and many of them will be targets for future atmosphere spectroscopy exploring their atmospheres. Furthermore, the mission has the potential to detect exomoons, planetary rings, binary and Trojan planets. The planetary science possible with PLATO 2.0 is complemented by its impact on stellar and galactic science via asteroseismology as well as light curves of all kinds of variable stars, together with observations of stellar clusters of different ages. This will allow us to improve stellar models and study stellar activity. A large number of well-known ages from red giant stars will probe the structure and evolution of our Galaxy. Asteroseismic ages of bright stars for different phases of stellar evolution allow calibrating stellar age-rotation relationships. Together with the results of ESA's Gaia mission, the results of PLATO 2.0 will provide a huge legacy to planetary, stellar and galactic science.
|
|
| 3. |
|
|
| 4. |
- Wang, Anqi, et al.
(författare)
-
Characterizing prostate cancer risk through multi-ancestry genome-wide discovery of 187 novel risk variants
- 2023
-
Ingår i: Nature Genetics. - : Springer Nature. - 1061-4036 .- 1546-1718. ; 55:12, s. 2065-2074
-
Tidskriftsartikel (refereegranskat)abstract
- The transferability and clinical value of genetic risk scores (GRSs) across populations remain limited due to an imbalance in genetic studies across ancestrally diverse populations. Here we conducted a multi-ancestry genome-wide association study of 156,319 prostate cancer cases and 788,443 controls of European, African, Asian and Hispanic men, reflecting a 57% increase in the number of non-European cases over previous prostate cancer genome-wide association studies. We identified 187 novel risk variants for prostate cancer, increasing the total number of risk variants to 451. An externally replicated multi-ancestry GRS was associated with risk that ranged from 1.8 (per standard deviation) in African ancestry men to 2.2 in European ancestry men. The GRS was associated with a greater risk of aggressive versus non-aggressive disease in men of African ancestry (P = 0.03). Our study presents novel prostate cancer susceptibility loci and a GRS with effective risk stratification across ancestry groups.
|
|
| 5. |
|
|
| 6. |
|
|
| 7. |
- Conti, David, V, et al.
(författare)
-
Trans-ancestry genome-wide association meta-analysis of prostate cancer identifies new susceptibility loci and informs genetic risk prediction
- 2021
-
Ingår i: Nature Genetics. - : Springer Nature. - 1061-4036 .- 1546-1718. ; 53:1, s. 65-75
-
Tidskriftsartikel (refereegranskat)abstract
- Prostate cancer is a highly heritable disease with large disparities in incidence rates across ancestry populations. We conducted a multiancestry meta-analysis of prostate cancer genome-wide association studies (107,247 cases and 127,006 controls) and identified 86 new genetic risk variants independently associated with prostate cancer risk, bringing the total to 269 known risk variants. The top genetic risk score (GRS) decile was associated with odds ratios that ranged from 5.06 (95% confidence interval (CI), 4.84-5.29) for men of European ancestry to 3.74 (95% CI, 3.36-4.17) for men of African ancestry. Men of African ancestry were estimated to have a mean GRS that was 2.18-times higher (95% CI, 2.14-2.22), and men of East Asian ancestry 0.73-times lower (95% CI, 0.71-0.76), than men of European ancestry. These findings support the role of germline variation contributing to population differences in prostate cancer risk, with the GRS offering an approach for personalized risk prediction. A meta-analysis of genome-wide association studies across different populations highlights new risk loci and provides a genetic risk score that can stratify prostate cancer risk across ancestries.
|
|
| 8. |
|
|
| 9. |
- Appeltans, W., et al.
(författare)
-
The Magnitude of Global Marine Species Diversity
- 2012
-
Ingår i: Current Biology. - : Elsevier BV. - 0960-9822 .- 1879-0445. ; 22:23, s. 2189-2202
-
Tidskriftsartikel (refereegranskat)abstract
- Background: The question of how many marine species exist is important because it provides a metric for how much we do and do not know about life in the oceans. We have compiled the first register of the marine species of the world and used this baseline to estimate how many more species, partitioned among all major eukaryotic groups, may be discovered. Results: There are similar to 226,000 eukaryotic marine species described. More species were described in the past decade (similar to 20,000) than in any previous one. The number of authors describing new species has been increasing at a faster rate than the number of new species described in the past six decades. We report that there are similar to 170,000 synonyms, that 58,000-72,000 species are collected but not yet described, and that 482,000-741,000 more species have yet to be sampled. Molecular methods may add tens of thousands of cryptic species. Thus, there may be 0.7-1.0 million marine species. Past rates of description of new species indicate there may be 0.5 +/- 0.2 million marine species. On average 37% (median 31%) of species in over 100 recent field studies around the world might be new to science. Conclusions: Currently, between one-third and two-thirds of marine species may be undescribed, and previous estimates of there being well over one million marine species appear highly unlikely. More species than ever before are being described annually by an increasing number of authors. If the current trend continues, most species will be discovered this century.
|
|
| 10. |
- Bruggmann, P., et al.
(författare)
-
Historical epidemiology of hepatitis C virus (HCV) in selected countries
- 2014
-
Ingår i: Journal of Viral Hepatitis. - Hoboken : Wiley-Blackwell. - 1352-0504 .- 1365-2893. ; 21, s. 5-33
-
Tidskriftsartikel (refereegranskat)abstract
- Chronic infection with hepatitis C virus (HCV) is a leading indicator for liver disease. New treatment options are becoming available, and there is a need to characterize the epidemiology and disease burden of HCV. Data for prevalence, viremia, genotype, diagnosis and treatment were obtained through literature searches and expert consensus for 16 countries. For some countries, data from centralized registries were used to estimate diagnosis and treatment rates. Data for the number of liver transplants and the proportion attributable to HCV were obtained from centralized databases. Viremic prevalence estimates varied widely between countries, ranging from 0.3% in Austria, England and Germany to 8.5% in Egypt. The largest viremic populations were in Egypt, with 6358000 cases in 2008 and Brazil with 2106000 cases in 2007. The age distribution of cases differed between countries. In most countries, prevalence rates were higher among males, reflecting higher rates of injection drug use. Diagnosis, treatment and transplant levels also differed considerably between countries. Reliable estimates characterizing HCV-infected populations are critical for addressing HCV-related morbidity and mortality. There is a need to quantify the burden of chronic HCV infection at the national level.
|
|
| 11. |
- Razavi, H., et al.
(författare)
-
The present and future disease burden of hepatitis C virus (HCV) infection with today's treatment paradigm
- 2014
-
Ingår i: Journal of Viral Hepatitis. - Hoboken : Wiley-Blackwell. - 1352-0504 .- 1365-2893. ; 21:Suppl. 1, s. 34-59
-
Tidskriftsartikel (refereegranskat)abstract
- The disease burden of hepatitis C virus (HCV) is expected to increase as the infected population ages. A modelling approach was used to estimate the total number of viremic infections, diagnosed, treated and new infections in 2013. In addition, the model was used to estimate the change in the total number of HCV infections, the disease progression and mortality in 2013-2030. Finally, expert panel consensus was used to capture current treatment practices in each country. Using today's treatment paradigm, the total number of HCV infections is projected to decline or remain flat in all countries studied. However, in the same time period, the number of individuals with late-stage liver disease is projected to increase. This study concluded that the current treatment rate and efficacy are not sufficient to manage the disease burden of HCV. Thus, alternative strategies are required to keep the number of HCV individuals with advanced liver disease and liver-related deaths from increasing.
|
|
| 12. |
- Wedemeyer, H., et al.
(författare)
-
Strategies to manage hepatitis C virus (HCV) disease burden
- 2014
-
Ingår i: Journal of Viral Hepatitis. - Hoboken : Wiley-Blackwell. - 1352-0504 .- 1365-2893. ; 21, s. 60-89
-
Tidskriftsartikel (refereegranskat)abstract
- The number of hepatitis C virus (HCV) infections is projected to decline while those with advanced liver disease will increase. A modeling approach was used to forecast two treatment scenarios: (i) the impact of increased treatment efficacy while keeping the number of treated patients constant and (ii) increasing efficacy and treatment rate. This analysis suggests that successful diagnosis and treatment of a small proportion of patients can contribute significantly to the reduction of disease burden in the countries studied. The largest reduction in HCV-related morbidity and mortality occurs when increased treatment is combined with higher efficacy therapies, generally in combination with increased diagnosis. With a treatment rate of approximately 10%, this analysis suggests it is possible to achieve elimination of HCV (defined as a >90% decline in total infections by 2030). However, for most countries presented, this will require a 3-5 fold increase in diagnosis and/or treatment. Thus, building the public health and clinical provider capacity for improved diagnosis and treatment will be critical.
|
|
| 13. |
- Razavi-Shearer, Devin M., et al.
(författare)
-
Adjusted estimate of the prevalence of hepatitis delta virus in 25 countries and territories
- 2024
-
Ingår i: JOURNAL OF HEPATOLOGY. - 0168-8278 .- 1600-0641. ; 80:2, s. 232-242
-
Tidskriftsartikel (refereegranskat)abstract
- Background & Aims: Hepatitis delta virus (HDV) is a satellite RNA virus that requires the hepatitis B virus (HBV) for assembly and propagation. Individuals infected with HDV progress to advanced liver disease faster than HBV-monoinfected individuals. Recent studies have estimated the global prevalence of anti-HDV antibodies among the HBV-infected population to be 5-15%. This study aimed to better understand HDV prevalence at the population level in 25 countries/territories. Methods: We conducted a literature review to determine the prevalence of anti-HDV and HDV RNA in hepatitis B surface antigen (HBsAg)-positive individuals in 25 countries/territories. Virtual meetings were held with experts from each setting to discuss the findings and collect unpublished data. Data were weighted for patient segments and regional heterogeneity to estimate the prevalence in the HBV-infected population. The findings were then combined with The Polaris Observatory HBV data to estimate the anti-HDV and HDV RNA prevalence in each country/territory at the population level. Results: After adjusting for geographical distribution, disease stage and special populations, the anti-HDV prevalence among the HBsAg+ population changed from the literature estimate in 19 countries. The highest anti-HDV prevalence was 60.1% in Mongolia. Once adjusted for the size of the HBsAg+ population and HDV RNA positivity rate, China had the highest absolute number of HDV RNA+ cases. Conclusions: We found substantially lower HDV prevalence than previously reported, as prior meta-analyses primarily focused on studies conducted in groups/regions that have a higher probability of HBV infection: tertiary care centers, specific risk groups or geographical regions. There is large uncertainty in HDV prevalence estimates. The implementation of reflex testing would improve estimates, while also allowing earlier linkage to care for HDV RNA+ individuals. The logistical and economic burden of reflex testing on the health system would be limited, as only HBsAg+ cases would be screened.
|
|
| 14. |
- Razavi, Homie A., et al.
(författare)
-
Hepatitis D double reflex testing of all hepatitis B carriers in low-HBV- and high-HBV/HDV-prevalence countries
- 2023
-
Ingår i: JOURNAL OF HEPATOLOGY. - : Elsevier. - 0168-8278 .- 1600-0641. ; 79:2, s. 576-580
-
Tidskriftsartikel (refereegranskat)abstract
- Hepatitis D virus (HDV) infection occurs as a coinfection with hepatitis B and increases the risk of hepatocellular carcinoma, decompensated cirrhosis, and mortality compared to hepatitis B virus (HBV) monoinfection. Reliable estimates of the prevalence of HDV infection and disease burden are essential to formulate strategies to find coinfected individuals more effectively and efficiently. The global prevalence of HBV infections was estimated to be 262,240,000 in 2021. Only 1,994,000 of the HBV in-fections were newly diagnosed in 2021, with more than half of the new diagnoses made in China. Our initial estimates indicated a much lower prevalence of HDV antibody (anti-HDV) and HDV RNA positivity than previously reported in published studies. Ac-curate estimates of HDV prevalence are needed. The most effective method to generate estimates of the prevalence of anti-HDV and HDV RNA positivity and to find undiagnosed individuals at the national level is to implement double reflex testing. This re-quires anti-HDV testing of all hepatitis B surface antigen-positive individuals and HDV RNA testing of all anti-HDV-positive in-dividuals. This strategy is manageable for healthcare systems since the number of newly diagnosed HBV cases is low. At the global level, a comprehensive HDV screening strategy would require only 1,994,000 HDV antibody tests and less than 89,000 HDV PCR tests. Double reflex testing is the preferred strategy in countries with a low prevalence of HBV and those with a high prevalence of both HBV and HDV. For example, in the European Union and North America only 35,000 and 22,000 cases, respectively, will require anti-HDV testing annually.
|
|
| 15. |
- Brandão, Andreia, et al.
(författare)
-
The CHEK2 Variant C.349A>G Is Associated with Prostate Cancer Risk and Carriers Share a Common Ancestor
- 2020
-
Ingår i: Cancers. - : MDPI AG. - 2072-6694. ; 12:11
-
Tidskriftsartikel (refereegranskat)abstract
- The identification of recurrent founder variants in cancer predisposing genes may have important implications for implementing cost-effective targeted genetic screening strategies. In this study, we evaluated the prevalence and relative risk of the CHEK2 recurrent variant c.349A>G in a series of 462 Portuguese patients with early-onset and/or familial/hereditary prostate cancer (PrCa), as well as in the large multicentre PRACTICAL case-control study comprising 55,162 prostate cancer cases and 36,147 controls. Additionally, we investigated the potential shared ancestry of the carriers by performing identity-by-descent, haplotype and age estimation analyses using high-density SNP data from 70 variant carriers belonging to 11 different populations included in the PRACTICAL consortium. The CHEK2 missense variant c.349A>G was found significantly associated with an increased risk for PrCa (OR 1.9; 95% CI: 1.1-3.2). A shared haplotype flanking the variant in all carriers was identified, strongly suggesting a common founder of European origin. Additionally, using two independent statistical algorithms, implemented by DMLE+2.3 and ESTIAGE, we were able to estimate the age of the variant between 2300 and 3125 years. By extending the haplotype analysis to 14 additional carrier families, a shared core haplotype was revealed among all carriers matching the conserved region previously identified in the high-density SNP analysis. These findings are consistent with CHEK2 c.349A>G being a founder variant associated with increased PrCa risk, suggesting its potential usefulness for cost-effective targeted genetic screening in PrCa families.
|
|
| 16. |
|
|
| 17. |
|
|
| 18. |
- Lange, Jonathan, et al.
(författare)
-
Novel lithographic printing techniques enabling sustainable and high quality multi material manufacturing process for future space outposts
- 2021
-
Ingår i: IAC 2021 Congress Proceedings, 72nd International Astronautical Congress (IAC), Dubai, United Arab Emirates. - : International Astronautical Federation (IAF).
-
Konferensbidrag (refereegranskat)abstract
- Several challenges remain before the full potential of on-orbit manufacturing can be realized. There may be some limitations to the types of items that can be manufactured in space. Such limitations could be caused by a variety of factors, including the materials required for a particular structure, the size of the object to be manufactured, the time required to execute the architecture, the configuration of the object being manufactured, and the raw material needed to support the manufacturing process. The complementary challenge to the relevant fabrication processes is the possibility to achieve the required precision demanded by geometrically complex structures and the ability to be versatile in processing a broad material spectrum. In this context, novel lithographic 3D printing techniques will be an asset to pave the way towards overcoming these challenges. Currently, the European Space Agency (ESA) is investigating the implementation of such technology in the context of a lunar base. In particular, two different applications are being studied: • Lithography-Based Ceramic Manufacturing (LCM), where the ceramic powder is distributed in a photocurable monomer formulation in presence of a photoinitiator. Ceramic materials are extensively used in a vast number of technological processes as well as in space applications. They are usually considered as the material of choice for applications where other materials such as plastic and metal fail to deliver the required performance. The LCM process will also allow processing lunar regolith simulant adding value to the current material portfolio of this technique, as well as to the range of processes potentially applicable on the lunar or Martian surface. • Lithography-based Metal Manufacturing (LMM) for processing metallic powders. In contrast to the currently predominantly used powder bed fusion (direct metal laser melting) techniques, this process uses a paste/suspension as feedstock and hence, does not rely on the use of highly spherical gas atomized powders. This will enable the utilization of recycled powders from scrap metals that are available at Moon bases or of metallic alloys reduced from lunar regolith, thus providing higher flexibility in accepting raw material with poor quality and purity. The paper addresses the results from both activities in terms of printed parts quality (roughness, density, resolution and accuracy) as well as the implementation requirements for the whole process chain, including suitable pre- and post-processing steps, with the aim to achieve a zero-waste flow in a lunar environment.
|
|
| 19. |
- Brandao, A, et al.
(författare)
-
The CHEK2 Variant C.349A>G Is Associated with Prostate Cancer Risk and Carriers Share a Common Ancestor
- 2020
-
Ingår i: Cancers. - : MDPI AG. - 2072-6694. ; 12:11
-
Tidskriftsartikel (refereegranskat)abstract
- The identification of recurrent founder variants in cancer predisposing genes may have important implications for implementing cost-effective targeted genetic screening strategies. In this study, we evaluated the prevalence and relative risk of the CHEK2 recurrent variant c.349A>G in a series of 462 Portuguese patients with early-onset and/or familial/hereditary prostate cancer (PrCa), as well as in the large multicentre PRACTICAL case–control study comprising 55,162 prostate cancer cases and 36,147 controls. Additionally, we investigated the potential shared ancestry of the carriers by performing identity-by-descent, haplotype and age estimation analyses using high-density SNP data from 70 variant carriers belonging to 11 different populations included in the PRACTICAL consortium. The CHEK2 missense variant c.349A>G was found significantly associated with an increased risk for PrCa (OR 1.9; 95% CI: 1.1–3.2). A shared haplotype flanking the variant in all carriers was identified, strongly suggesting a common founder of European origin. Additionally, using two independent statistical algorithms, implemented by DMLE+2.3 and ESTIAGE, we were able to estimate the age of the variant between 2300 and 3125 years. By extending the haplotype analysis to 14 additional carrier families, a shared core haplotype was revealed among all carriers matching the conserved region previously identified in the high-density SNP analysis. These findings are consistent with CHEK2 c.349A>G being a founder variant associated with increased PrCa risk, suggesting its potential usefulness for cost-effective targeted genetic screening in PrCa families.
|
|
| 20. |
- Leonardo, Diego A., et al.
(författare)
-
Orientational Ambiguity in Septin Coiled Coils and its Structural Basis
- 2021
-
Ingår i: Journal of Molecular Biology. - : Elsevier BV. - 0022-2836. ; 433:9
-
Tidskriftsartikel (refereegranskat)abstract
- Septins are an example of subtle molecular recognition whereby different paralogues must correctly assemble into functional filaments important for essential cellular events such as cytokinesis. Most possess C-terminal domains capable of forming coiled coils which are believed to be involved in filament formation and bundling. Here, we report an integrated structural approach which aims to unravel their architectural diversity and in so doing provide direct structural information for the coiled-coil regions of five human septins. Unexpectedly, we encounter dimeric structures presenting both parallel and antiparallel arrangements which are in consonance with molecular modelling suggesting that both are energetically accessible. These sequences therefore code for two metastable states of different orientations which employ different but overlapping interfaces. The antiparallel structures present a mixed coiled-coil interface, one side of which is dominated by a continuous chain of core hydrophilic residues. This unusual type of coiled coil could be used to expand the toolkit currently available to the protein engineer for the design of previously unforeseen coiled-coil based assemblies. Within a physiological context, our data provide the first atomic details related to the assumption that the parallel orientation is likely formed between septin monomers from the same filament whilst antiparallelism may participate in the widely described interfilament cross bridges necessary for higher order structures and thereby septin function.
|
|
| 21. |
- Riede, M., et al.
(författare)
-
Material characterization of AISI 316L flexure pivot bearings fabricated by additive manufacturing
- 2019
-
Ingår i: Materials. - : MDPI. - 1996-1944. ; 12:15
-
Tidskriftsartikel (refereegranskat)abstract
- Recently, additive manufacturing (AM) by laser metal deposition (LMD) has become a key technology for fabricating highly complex parts without any support structures. Compared to the well-known powder bed fusion process, LMD enhances manufacturing possibilities to overcome AM-specific challenges such as process inherent porosity, minor build rates, and limited part size. Moreover, the advantages aforementioned combined with conventional machining enable novel manufacturing approaches in various fields of applications. Within this contribution, the additive manufacturing of filigree flexure pivots using 316L-Si by means of LMD with powder is presented. Frictionless flexure pivot bearings are used in space mechanisms that require high reliability, accuracy, and technical cleanliness. As a contribution to part qualification, the manufacturing process, powder material, and fabricated specimens were investigated in a comprehensive manner. Due to its major impact on the process, the chemical powder composition was characterized in detail by energy dispersive X-ray spectroscopy (EDX) and inductively coupled plasma optical emission spectrometry (ICP-OES). Moreover, a profound characterization of the powder morphology and flowability was carried out using scanning electron microscopy (SEM) and novel rheological investigation techniques. Furthermore, quantitative image analysis, mechanical testing, laser scanning microscopy, and 3D shape measurement of manufactured specimens were conducted. As a result, the gained knowledge was applied for the AM-specific redesign of the flexure pivot. Finally, a qualified flexure pivot has been manufactured in a hybrid manner to subsequently ensure its long-term durability in a lifetime test bench.
|
|
| 22. |
|
|
| 23. |
- Palmieri, M., et al.
(författare)
-
Frequency and Evolution of Acute Oral Complications in Patients Undergoing Radiochemotherapy Treatment for Head and Neck Squamous Cell Carcinoma
- 2021
-
Ingår i: Ear, Nose and Throat Journal. - : SAGE Publications. - 0145-5613 .- 1942-7522. ; 100:5 suppl.
-
Tidskriftsartikel (refereegranskat)abstract
- Despite its effectiveness, radiochemotherapy treatment in the head and neck region is accompanied by acute oral complications such as oral mucositis, dysphagia, xerostomia, and dysgeusia. The aim of this study was to analyze and prospectively assess the frequency and evolution of acute oral complications during radiochemotherapy in patients diagnosed with squamous cell carcinoma in the head and neck region. We have analyzed oral complications of 20 patients during 6 weeks of radiochemotherapy treatment for squamous cell carcinoma. Oral mucositis was evaluated according to the World Health Organization criteria, dysphagia, and dysgeusia according to the National Cancer Institute Common Toxicity Criteria, and xerostomia according to parameters set by the Seminars in Radiation Oncology. Mucositis was first observed in the second week and all patients presented some degree of mucositis in the fourth week of radiotherapy. Xerostomia and dysphagia were initially reported already in the first week of radiotherapy. All patients presented xerostomia in the fourth week; however, dysphagia was observed in all patients, only in the sixth week. Dysgeusia was first observed in the second week, becoming more severe in the third week. Acute oral complications can be observed throughout the treatment, but the third week of radiotherapy seems to represent a critical week, regardless of the grade of the complication. The sixth week presents the worst grades of these complications. Knowledge about the natural course of oral complications during radiotherapy is important to develop better strategies for treatment and improve the patients’ quality of life. © The Author(s) 2019.
|
|
| 24. |
|
|
| 25. |
|
|
| 26. |
- Wilkinson, JD, et al.
(författare)
-
Monitoring levels of preservative sensitivity in Europe - A 10-year overview (1991-2000)
- 2002
-
Ingår i: Contact Dermatitis. - : Wiley. - 0105-1873. ; 46:4, s. 207-210
-
Tidskriftsartikel (refereegranskat)abstract
- A 10-year multicentre analysis of the frequency of sensitivity to common preservatives collected in 16 centres in 11 countries has shown stable but persisting high levels of sensitivity to formaldehyde and 5-chloro-2-methyl-4-isothiazolin-3-one + 2-methyl-4-isothiazolin-3-one (MCI/MI). It has also revealed a significant increase in the level of reactivity to methyldibromoglutaronitrile (MDBGN) from 0.7% in 1991 to 3.5% in 2000. The current high level of sensitivity to MDBGN requires an urgent safety re-evaluation and risk assessment update along with consideration of immediate lowering of use concentrations, especially in leave-on products.
|
|
| 27. |
- Brandao, Luiz Eduardo M., et al.
(författare)
-
Acute sleep loss alters circulating fibroblast growth factor 21 levels in humans: A randomised crossover trial
- 2022
-
Ingår i: Journal of Sleep Research. - : Wiley. - 0962-1105 .- 1365-2869. ; 31:2
-
Tidskriftsartikel (refereegranskat)abstract
- The hormone fibroblast growth factor 21 (FGF21) modulates tissue metabolism and circulates at higher levels in metabolic conditions associated with chronic sleep-wake disruption, such as type 2 diabetes and obesity. In the present study, we investigated whether acute sleep loss impacts circulating levels of FGF21 and tissue-specific production, and response pathways linked to FGF21. A total of 15 healthy normal-weight young men participated in a randomised crossover study with two conditions, sleep loss versus an 8.5-hr sleep window. The evening before each intervention, fasting blood was collected. Fasting, post-intervention morning skeletal muscle and adipose tissue samples underwent quantitative polymerase chain reaction and DNA methylation analyses, and serum FGF21 levels were measured before and after an oral glucose tolerance test. Serum levels of FGF21 were higher after sleep loss compared with sleep, both under fasting conditions and following glucose intake (similar to 27%-30%, p = 0.023). Fasting circulating levels of fibroblast activation protein, a protein which can degrade circulating FGF21, were not altered by sleep loss, whereas DNA methylation in the FGF21 promoter region increased only in adipose tissue. However, even though specifically the muscle exhibited transcriptional changes indicating adverse alterations to redox and metabolic homeostasis, no tissue-based changes were observed in expression of FGF21, its receptors, or selected signalling targets, in response to sleep loss. In summary, we found that acute sleep loss resulted in increased circulating levels of FGF21 in healthy young men, which may occur independent of a tissue-based stress response in metabolic peripheral tissues. Further studies may decipher whether changes in FGF21 signalling after sleep loss modulate metabolic outcomes associated with sleep or circadian disruption.
|
|
| 28. |
- Bruynzeel, DP, et al.
(författare)
-
Monitoring the European standard series in 10 centres 1996-2000
- 2005
-
Ingår i: Contact Dermatitis. - : Wiley. - 0105-1873 .- 1600-0536. ; 53:3, s. 146-149
-
Tidskriftsartikel (refereegranskat)abstract
- A 5-year retrospective study of the frequency of sensitization to the 25 allergens of the European standard series (ESS) was conducted in 10 centres in 8 European countries. Included were the results of 26 210 patients. The range in sensitivities differed moderately between the centres. Combining results of different centres and drawing conclusions on incidences can be done only with great care. The information on the ranking of the allergens and their sensitization incidence in the clinics are useful for decisions on the future composition of the standard series. The ESS is still a valid screening tool, and no substances should be deleted.
|
|
| 29. |
- Cowie, A. L., et al.
(författare)
-
Applying a science-based systems perspective to dispel misconceptions about climate effects of forest bioenergy
- 2021
-
Ingår i: Global Change Biology Bioenergy. - : John Wiley and Sons Inc. - 1757-1693 .- 1757-1707. ; 13:8, s. 1210-1231
-
Tidskriftsartikel (refereegranskat)abstract
- The scientific literature contains contrasting findings about the climate effects of forest bioenergy, partly due to the wide diversity of bioenergy systems and associated contexts, but also due to differences in assessment methods. The climate effects of bioenergy must be accurately assessed to inform policy-making, but the complexity of bioenergy systems and associated land, industry and energy systems raises challenges for assessment. We examine misconceptions about climate effects of forest bioenergy and discuss important considerations in assessing these effects and devising measures to incentivize sustainable bioenergy as a component of climate policy. The temporal and spatial system boundary and the reference (counterfactual) scenarios are key methodology choices that strongly influence results. Focussing on carbon balances of individual forest stands and comparing emissions at the point of combustion neglect system-level interactions that influence the climate effects of forest bioenergy. We highlight the need for a systems approach, in assessing options and developing policy for forest bioenergy that: (1) considers the whole life cycle of bioenergy systems, including effects of the associated forest management and harvesting on landscape carbon balances; (2) identifies how forest bioenergy can best be deployed to support energy system transformation required to achieve climate goals; and (3) incentivizes those forest bioenergy systems that augment the mitigation value of the forest sector as a whole. Emphasis on short-term emissions reduction targets can lead to decisions that make medium- to long-term climate goals more difficult to achieve. The most important climate change mitigation measure is the transformation of energy, industry and transport systems so that fossil carbon remains underground. Narrow perspectives obscure the significant role that bioenergy can play by displacing fossil fuels now, and supporting energy system transition. Greater transparency and consistency is needed in greenhouse gas reporting and accounting related to bioenergy.
|
|
| 30. |
- Diepgen, TL, et al.
(författare)
-
Mercaptobenzothiazole or the mercapto-mix: which should be in the standard series?
- 2006
-
Ingår i: Contact Dermatitis. - : Wiley. - 0105-1873 .- 1600-0536. ; 55:1, s. 36-38
-
Tidskriftsartikel (refereegranskat)abstract
- Mercaptobenzothiazole (MBT) compounds are well known contact allergens. To detect rubber allergic patients we use both MBT (2% in petrolatum) and a mercapto-mix with 4 constituents of 0.5% each in our standard series. In this article the EECDRG presents data of in total 32 475 consecutive tested patients attending the respective contact dermatitis clinics from 11 centres in Europe to determine if the mix and MBT detected the same allergic patients. We found 327 patients positive to the mix or MBT, or to both. 261 were positive to the mix and 254 to MBT. MBT was negative in 73 patients who were positive to the mix. If the mix had not been in the standard series, on average 22% of patients allergic to a mercapto-compound would have been missed, for MBT this would have been on average 20%. All clinics would have missed a significant number of positive reactions if both compounds had not been tested. We conclude, that both the mercapto mix and MBT are required in the standard series.
|
|
| 31. |
- Garofalo, Danilo F. Trovo, et al.
(författare)
-
Land-use change CO2 emissions associated with agricultural products at municipal level in Brazil
- 2022
-
Ingår i: Journal of Cleaner Production. - : Elsevier BV. - 0959-6526 .- 1879-1786. ; 364
-
Tidskriftsartikel (refereegranskat)abstract
- Land-use change (LUC) accounted for approximately 66% of CO2 emissions in Brazil in 2020, with significant implications for carbon footprint of Brazilian agricultural products. Accurate LUC estimates associated with agriculture are critical to carbon footprint (CF) and life cycle assessment (LCA) studies and derived measures towards low-carbon supply chains. The aim of the study was to provide direct LUC (dLUC) estimates of CO2 emissions associated with a comprehensive set of agricultural products in Brazil at municipal-level and based on spatially-explicit land conversion data, appropriate for CF and LCA studies. The effect of different dLUC modeling choices on the results are also presented. The modeling followed IPCC guidelines and improved the BRLUC method. MapBiomas spatially-explicit data, municipality-level statistics, regionalized carbon stocks and a shared responsibility approach were combined to obtain dLUC emission rates for 64 crops, plus forestry and planted pastures, in the 5,570 Brazilian municipalities, as well as at state and national levels. It will be open access at www.embrapa.br. The most recent version led to an estimated 911 Mtons of CO2 associated with agriculture in 2019, 81% of that associated with planted pastures. National level dLUC emission rates for corn, pastures, soybean and sugarcane were estimated as 2.0, 4.1, 2.3 and 0.3 tCO(2).ha(-1).yr(-1), respectively. The dLUC emissions are highly heterogeneous across the country and land uses, ranging from positive to negative. In general, they were higher in the Amazon biome, due to deforestation, and lower in Eastern Brazil, where agricultural areas are more consolidated. The resulting data is more consistent with dLUC rationale, IPCC guidelines and PAS2050 when previous land use is known and is recommended to be used, whenever data at farm level are not available. The study also shows the strong effect of different dLUC modeling choices on results and reinforces recommendations for further mitigation options.
|
|
| 32. |
- Gruvberger, Birgitta, et al.
(författare)
-
Patch testing with methyldibromo glutaronitrile, a multicentre study within the EECDRG
- 2005
-
Ingår i: Contact Dermatitis. - : Wiley. - 0105-1873 .- 1600-0536. ; 52:1, s. 14-18
-
Tidskriftsartikel (refereegranskat)abstract
- Contact allergy to and allergic contact dermatitis from methyldibromo glutaronitrile (MDBGN) have frequently been reported. As there has been no agreement on which MDBGN test preparation to use, a study was initiated to help determine the optimal patch test preparation for MDBGN. 2661 consecutively patch tested patients at 11 test clinics representing 9 European countries participated. Petrolatum preparations with MDBGN at 1.0%, 0.5%, 0.3% and 0.1% were inserted in the standard series. Contact allergy rates were noted in the range 4.4-1.1% following decreasing test concentrations. Reactions not fulfilling all criteria to be classified as allergic reactions could represent either weak allergic or irritant reactions, and such reactions were noted in the range 8.2-0.5% with decreasing concentrations. A significant number of these reactions represented weak allergic reactions, as allergic reactions were obtained to higher patch test concentrations in the same individual. Morphologically irritant reactions were noted only for the highest test concentrations. In summary, the contact allergy rates and frequencies of doubtful and irritant reactions vary with the patch test concentration. The final decision on patch test concentration for MDBGN should not only rely on these factors but also include information on patch test concentrations required to diagnose individual cases with allergic contact dermatitis from MDBGN as well as results of repeated open application tests.
|
|
| 33. |
|
|
| 34. |
- Guimaraes, K. S. D., et al.
(författare)
-
Lactiplantibacillus plantarum WJL administration during pregnancy and lactation improves lipid profile, insulin sensitivity and gut microbiota diversity in dyslipidemic dams and protects male offspring against cardiovascular dysfunction in later life
- 2020
-
Ingår i: Food & Function. - : Royal Society of Chemistry (RSC). - 2042-6496 .- 2042-650X. ; 11:10, s. 8939-8950
-
Tidskriftsartikel (refereegranskat)abstract
- Background and aim: Maternal dyslipidemia is recognized as a risk factor for the development of arterial hypertension (AH) and cardiovascular dysfunction in offspring. Here we evaluated the effects of probiotic administration of a specific strain of Lactiplantibacillus plantarum(WJL) during pregnancy and lactation on gut microbiota and metabolic profile in dams fed with a high-fat and high-cholesterol (HFHC) diet and its long-term effects on the cardiovascular function in male rat offspring.Methods and results: Pregnant Wistar rats were allocated into three groups: dams fed a control diet (CTL = 5), dams fed a HFHC diet (DLP = 5) and dams fed a HFHC diet and receivingL. plantarum WJL during pregnancy and lactation (DLP-Lp(WJL)).L. plantarum WJL (1 x 10(9)CFU) or vehicle (NaCl, 0.9%) was administered daily by oral gavage for 6 weeks, covering the pregnancy and lactation periods. After weaning, male offspring received a standard diet up to 90 days of life. Biochemical measurements and gut microbiota were evaluated in dams. In male offspring, blood pressure (BP), heart rate (HR) and vascular reactivity were evaluated at 90 days of age. Dams fed with a HFHC diet during pregnancy and lactation had increased lipid profile and insulin resistance and showed dysbiotic gut microbiota. Administration of L. plantarum WJL to dams having maternal dyslipidemia improved gut microbiota composition, lipid profile and insulin resistance in them. Blood pressure was augmented and vascular reactivity was impaired with a higher contractile response and a lower response to endothelium-dependent vasorelaxation in DLP male offspring. In contrast, male offspring of DLP-Lp(WJL) dams had reduced blood pressure and recovered vascular function in later life.Conclusion: Administration ofL. plantarum WJL during pregnancy and lactation in dams improved gut microbiota diversity, reduced maternal dyslipidemia and prevented cardiovascular dysfunction in male rat offspring.
|
|
| 35. |
- Kirschbaum, Miko U.F., et al.
(författare)
-
Is tree planting an effective strategy for climate change mitigation?
- 2024
-
Ingår i: Science of the Total Environment. - : Elsevier B.V.. - 0048-9697 .- 1879-1026. ; 909
-
Tidskriftsartikel (refereegranskat)abstract
- The world's forests store large amounts of carbon (C), and growing forests can reduce atmospheric CO2 by storing C in their biomass. This has provided the impetus for world-wide tree planting initiatives to offset fossil-fuel emissions. However, forests interact with their environment in complex and multifaceted ways that must be considered for a balanced assessment of the value of planting trees. First, one needs to consider the potential reversibility of C sequestration in trees through either harvesting or tree death from natural factors. If carbon storage is only temporary, future temperatures will actually be higher than without tree plantings, but cumulative warming will be reduced, contributing both positively and negatively to future climate-change impacts. Alternatively, forests could be used for bioenergy or wood products to replace fossil-fuel use which would obviate the need to consider the possible reversibility of any benefits. Forests also affect the Earth's energy balance through either absorbing or reflecting incoming solar radiation. As forests generally absorb more incoming radiation than bare ground or grasslands, this constitutes an important warming effect that substantially reduces the benefit of C storage, especially in snow-covered regions. Forests also affect other local ecosystem services, such as conserving biodiversity, modifying water and nutrient cycles, and preventing erosion that could be either beneficial or harmful depending on specific circumstances. Considering all these factors, tree plantings may be beneficial or detrimental for mitigating climate-change impacts, but the range of possibilities makes generalisations difficult. Their net benefit depends on many factors that differ between specific circumstances. One can, therefore, neither uncritically endorse tree planting everywhere, nor condemn it as counter-productive. Our aim is to provide key information to enable appropriate assessments to be made under specific circumstances. We conclude our discussion by providing a step-by-step guide for assessing the merit of tree plantings under specific circumstances.
|
|
| 36. |
- Moritz, J., et al.
(författare)
-
Functional integration approaches via laser powder bed processing
- 2019
-
Ingår i: Journal of laser applications. - : Laser Institute of America. - 1042-346X .- 1938-1387. ; 31:2
-
Tidskriftsartikel (refereegranskat)abstract
- Additive manufacturing design rules are different from those of conventional fabrication techniques. These allow geometries that would not be possible to achieve otherwise. One example of application is the integration of functional parts as part of the manufacturing process. Conceivable applications range from mechanical functions like integration of moving parts or thermodynamic functions, for example, cooling channels or incorporation of electric circuits for electrical functionalization [J. Glasschroeder, E. Prager, and M. F. Zaeh, Rapid Prototyping J. 21, 207–215 (2015)]. Nevertheless, the potential of functional integration using powder-bed processes is far from being exhausted. The present approach addresses the generation of inner cavities and internal structures of titanium-based parts or components by the use of selective laser melting. This paper focusses on the investigation of voids and cavities regarding their capabilities to add new functions to the material. To this end, comprehensive characterization is performed using destructive as well as nondestructive testing methods. These include 3D scanning, computed tomography, and surface roughness measurements as well as microscopic analysis. Voids and cavities were filled with different thermoplastic materials, followed by the qualitative assessment of the mold filling and resulting material properties. Finally, applications are derived and evaluated with respect to the field of lightweight design or damping structures.
|
|
| 37. |
- Novaes, Renan M. L., et al.
(författare)
-
Estimating 20-year land-use change and derived CO2 emissions associated with crops, pasture and forestry in Brazil and each of its 27 states
- 2017
-
Ingår i: Global Change Biology. - : WILEY. - 1354-1013 .- 1365-2486. ; 23:9, s. 3716-3728
-
Tidskriftsartikel (refereegranskat)abstract
- Land-use change (LUC) in Brazil has important implications on global climate change, ecosystem services and biodiversity, and agricultural expansion plays a critical role in this process. Concerns over these issues have led to the need for estimating the magnitude and impacts associated with that, which are increasingly reported in the environmental assessment of products. Currently, there is an extensive debate on which methods are more appropriate for estimating LUC and related emissions and regionalized estimates are lacking for Brazil, which is a world leader in agricultural production (e.g. food, fibres and bioenergy). We developed a method for estimating scenarios of past 20-year LUC and derived CO2 emission rates associated with 64 crops, pasture and forestry in Brazil as whole and in each of its 27 states, based on time-series statistics and in accordance with most used carbon-footprinting standards. The scenarios adopted provide a range between minimum and maximum rates of CO2 emissions from LUC according to different possibilities of land-use transitions, which can have large impacts in the results. Specificities of Brazil, like multiple cropping and highly heterogeneous carbon stocks, are also addressed. The highest CO2 emission rates are observed in the Amazon biome states and crops with the highest rates are those that have undergone expansion in this region. Some states and crops showing large agricultural areas have low emissions associated, especially in southern and eastern Brazil. Native carbon stocks and time of agricultural expansion are the most decisive factors to the patterns of emissions. Some implications on LUC estimation methods and standards and on agri-environmental policies are discussed.
|
|
| 38. |
- Pishgar-Komleh, S. H., et al.
(författare)
-
Integration of life cycle assessment, artificial neural networks, and metaheuristic optimization algorithms for optimization of tomato-based cropping systems in Iran
- 2020
-
Ingår i: The International Journal of Life Cycle Assessment. - : Springer Science and Business Media LLC. - 0948-3349 .- 1614-7502.
-
Tidskriftsartikel (refereegranskat)abstract
- PurposeThe main purpose of this study was to evaluate the use of an integrated life cycle assessment (LCA), artificial neural network, and metaheuristic optimization model to improve the sustainability of tomato-based cropping systems in Iran. The model outputs the combination of input usage in a tomato cropping system, which leads to the highest economic output and the least environmental impact.MethodsThe LCA inventory was created using data from 114 open-field tomato farms in the Alborz Province of Iran during one growing period in 2015. Among all management components, the main focus was on irrigation management systems. The optimization problem was designed by integrating three indicators: carbon footprint (CF), benefit-cost ratio (BCR), and energy use efficiency (EUE) as the objective of field tomato production. The functional unit was 1 kg of tomato aligned with the system boundary of the cradle to market life cycle. Three artificial neural networks (ANNs) were applied to model relationships between the inputs and three indices (CF, BCR, and EUE) as the objective functions. Multi-objective genetic algorithm (MOGA) and multi-objective particle swarm optimization (MOPSO) were used to minimize the CF and maximize the BCR and EUE indicators. The abovementioned aims have been pursued by developing codes in MATLAB software.Results and discussionCF, BCR, and EUE were calculated to be 0.26 kg CO2−eq (kg tomato)−1, 1.8, and 0.5, respectively. MOGA results envisage the possibility of an increase of 86% and 50% in the EUE and BCR and a 43% reduction in the CF of tomato production systems. Moreover, EUE and BCR increased by 83% and 49%, and CF was reduced by 39% from the optimum results obtained from the MOPSO algorithm. It was revealed that in order to optimize field tomato production with the target objectives of this study, a large additional use for irrigation pipes, plastic, and machinery in comparison to current situation is required, while a large reduction of biocide, chemical fertilizer, and electricity consumption is indispensable.ConclusionsAccording to the results of our study, it was concluded that the optimal solutions require a modernization of irrigation systems and a decrease in the consumption of chemical fertilizers and pesticides. The implementation of management options for such solutions is discussed.
|
|
| 39. |
|
|
| 40. |
- Thomassen, Mads, et al.
(författare)
-
Clinical, splicing, and functional analysis to classify BRCA2 exon 3 variants : Application of a points-based ACMG/AMP approach
- 2022
-
Ingår i: Human Mutation. - : Hindawi Limited. - 1059-7794 .- 1098-1004. ; 43:12, s. 1921-1944
-
Tidskriftsartikel (refereegranskat)abstract
- Skipping of BRCA2 exon 3 (∆E3) is a naturally occurring splicing event, complicating clinical classification of variants that may alter ∆E3 expression. This study used multiple evidence types to assess pathogenicity of 85 variants in/near BRCA2 exon 3. Bioinformatically predicted spliceogenic variants underwent mRNA splicing analysis using minigenes and/or patient samples. ∆E3 was measured using quantitative analysis. A mouse embryonic stem cell (mESC) based assay was used to determine the impact of 18 variants on mRNA splicing and protein function. For each variant, population frequency, bioinformatic predictions, clinical data, and existing mRNA splicing and functional results were collated. Variant class was assigned using a gene-specific adaptation of ACMG/AMP guidelines, following a recently proposed points-based system. mRNA and mESC analysis combined identified six variants with transcript and/or functional profiles interpreted as loss of function. Cryptic splice site use for acceptor site variants generated a transcript encoding a shorter protein that retains activity. Overall, 69/85 (81%) variants were classified using the points-based approach. Our analysis shows the value of applying gene-specific ACMG/AMP guidelines using a points-based approach and highlights the consideration of cryptic splice site usage to appropriately assign PVS1 code strength.
|
|
| 41. |
- Turcato, A. C., et al.
(författare)
-
Introducing a cloud based architecture for the distributed analysis of Real-Time Ethernet traffic
- 2020
-
Ingår i: Proceedings. - : Institute of Electrical and Electronics Engineers Inc.. - 9781728148922 ; , s. 235-240
-
Konferensbidrag (refereegranskat)abstract
- The use of industrial communication protocols based on Real-Time Ethernet (RTE) standards is completely replacing traditional industrial fieldbuses. As usual, when a technology becomes mature, the need of efficient diagnostic and maintenance tools quickly raises. Very often, following the paradigm of Industry 4.0, the most effective diagnostic systems are today based on distributed, cloud-centric, architectures and artificial intelligence. However, the distributed analysis of RTE systems is challenging, considering the plurality of protocols and the stringent cost constrains which are common in industry. In this paper, a new architecture for the distributed analysis of RTE networks is proposed, leveraging on distributed probes that send traffic samples to Matlab cloud for remote analysis. The paper also proposes a software conversion tool to adapt general PCAP files captured by popular sniffers (e.g. Wireshark) into MAT file for easier Matlab elaboration. Last, a test bench for characterization (in terms of transfer delays) of the first part of the chain for RTE traffic sampling is described. The results show that in less than 10 seconds it is possible to transfer chunks of RTE traffic data (captured on industrial networks with hundreds of real-time devices) directly to the cloud and to have them converted in Matlab format. © 2020 IEEE.
|
|
| 42. |
|
|
| 43. |
|
|
| 44. |
- Barbosa, E.A., et al.
(författare)
-
Quality improvement and geographical indication of cachaça (Brazilian spirit) by using locally selected yeast strains
- 2016
-
Ingår i: Journal of Applied Microbiology. - : Oxford University Press (OUP). - 1365-2672 .- 1364-5072. ; 121:4, s. 1038-1051
-
Tidskriftsartikel (refereegranskat)abstract
- Aims In order to improve the quality and to create a biological basis for obtainment of the protected denomination of origin (PDO), indigenous yeast were isolated and characterized for use in Salinas city (the Brazilian region of quality cachaça production). Material and methods Seven thousand and two hundred yeast colonies from 15 Salinas city distilleries were screened based on their fermentative behaviour and the physicochemical composition of cachaça. Molecular polymorphic analyses were performed to characterize these isolates. Results Two Saccharomyces cerevisiae strains (nos. 678 and 680) showed appropriate characteristics to use in the cachaça production: low levels of acetaldehyde and methanol, and high ethyl lactate/ethyl acetate ratio respectively. They also presented polymorphic characteristics more closely related between themselves even when compared to other strains from Salinas. Conclusions The application of selected yeast to cachaça production can contribute for the improvement of the quality product as well as be used as a natural marker for PDO. Significance and Impact of the Study This study suggests that the use of selected yeast strains could contribute to obtain a cachaça similar to those produced traditionally, while getting wide acceptation in the market, yet presenting more homogeneous organoleptic characteristics, and thus contributing to the PDO implementation.
|
|
| 45. |
- Bartoli, A., et al.
(författare)
-
Coupling economic and GHG emission accounting models to evaluate the sustainability of biogas policies
- 2019
-
Ingår i: Renewable & sustainable energy reviews. - : Elsevier. - 1364-0321 .- 1879-0690. ; 106, s. 133-148
-
Tidskriftsartikel (refereegranskat)abstract
- The aim of this study is to evaluate and quantify the impacts of different biogas and related policies on the agricultural sector as well as their performance in terms of climate change mitigation and associated costs. To do so we coupled the partial equilibrium approach simulating the market clearing process with the perspective of Life Cycle Assessment of GHG applying it to the well-documented Lombardy case. Results show that the recent Italian biogas policy – prompting manure utilization and reducing the average subsidy per kWh – effectively increased the environmental sustainability of the system, which only now seems able to counteract global warming. Synergies are observed when the recent Common Agricultural Policy greening reform is simultaneously considered by the model.
|
|
| 46. |
|
|
| 47. |
- Brandao, Idney, et al.
(författare)
-
Density functional theory investigation of the second hyperpolarizability of the phenol blue in solution
- 2022
-
Ingår i: Chemical Physics Letters. - : Elsevier. - 0009-2614 .- 1873-4448. ; 796
-
Tidskriftsartikel (refereegranskat)abstract
- The second electronic hyperpolarizability (gamma) of the phenol blue (PB) in several solvents in a wide range of dielectric constants is investigated using the Density Functional Theory. The performance of hybrid functionals, with and without long-range correction, is addressed by comparison to Hartree-Fock calculations. Among the employed exchange-correlation functionals, the LC-BLYP functional is suitable for describing the behavior of gamma in solution. LC-BLYP results indicate a clear relationship between the second hyperpolarizability and the bond length alternation (BLA) coordinate for PB in solution, in agreement with experiment.
|
|
| 48. |
- Brandao, Luiz Eduardo M., et al.
(författare)
-
Social Jetlag Changes During the COVID-19 Pandemic as a Predictor of Insomnia - A Multi-National Survey Study
- 2021
-
Ingår i: Nature and Science of Sleep. - : Dove Medical Press. - 1179-1608. ; 13, s. 1711-1722
-
Tidskriftsartikel (refereegranskat)abstract
- Purpose: Lifestyle and work habits have been drastically altered by restrictions due to the COVID-19 pandemic. Whether the associated changes in sleep timing modulate the risk of suffering from symptoms of insomnia, the most prevalent sleep disorder, is however incompletely understood. Here, we evaluate the association between the early pandemic-associated change in 1) the magnitude of social jetlag (SJL) - ie, the difference between sleep timing on working vs free days - and 2) symptoms of insomnia.Patients and Methods: A total of 14,968 anonymous participants (mean age: 40 years; 64% females) responded to a standardized internet-based survey distributed across 14 countries. Using logistic multivariate regression, we examined the association between the degree of social jetlag and symptoms of insomnia, controlling for important confounders like social restriction extension, country specific COVID-19 severity and psychological distress, for example.Results: In response to the pandemic, participants reported later sleep timing, especially during workdays. Most participants (46%) exhibited a reduction in their SJL, whereas 20% increased it; and 34% reported no change in SJL. Notably, we found that both increased and decreased SJL, as a result of the COVID-19 pandemic, were associated with later sleep midpoint (indicating a later chronotype) as well as more recurrent and moderate-to-severe symptoms of insomnia (about 23-54% higher odds ratio than subjects with unchanged SJL). Primarily those with reduced SJL shifted their bedtimes to a later timepoint, compared with those without changes in SJL.Conclusion: Our findings offer important insights into how self-reported changes to the stability of sleep/wake timing, as reflected by changes in SJL, can be a critical marker of the risk of experiencing insomnia-related symptoms - even when individuals manage to reduce their social jetlag. These findings emphasize the clinical importance of analyzing sleep-wake regularity.
|
|
| 49. |
|
|
| 50. |
|
|
