| 1. |
- Xia, Xinxin, et al.
(författare)
-
Revealing the crystalline packing structure of Y6 in the active layer of organic solar cells: the critical role of solvent additives
- 2023
-
Ingår i: Journal of Materials Chemistry A. - : ROYAL SOC CHEMISTRY. - 2050-7488 .- 2050-7496. ; 11:40, s. 21895-21907
-
Tidskriftsartikel (refereegranskat)abstract
- The bulk heterojunction (BHJ) morphology of photovoltaic materials is crucial to the fundamental optoelectronic properties of organic solar cells (OSCs). However, in the photoactive layer, the intrinsic crystalline packing structure of Y6, currently the hallmark molecule among Y-series non-fullerene acceptors (NFAs), has not been unambiguously determined. Here, employing grazing-incidence wide-angle X-ray scattering (GIWAXS), we managed to uncover the intrinsic crystalline packing structure of Y6 in the BHJ active layer of OSCs, which is found to be different from its single-crystal structure reported previously. Moreover, we find that solvent additive 1-chloronaphthalene (CN) can induce highly ordered packing of Y6 in BHJ thin films. With the help of atomistic molecular dynamics simulations, it is revealed that pi-pi interactions generally exist between naphthalene derivatives and IC terminals of Y6 analogues, which would essentially improve their long-range ordering. Our work reveals the intrinsic crystalline packing structure of Y6 in the BHJ active layer as well as its crystallization mechanism in thin films, thus providing direct correlations between this crystalline packing and the device characteristics and photophysical properties.
|
|
| 2. |
- He, Chengliang, et al.
(författare)
-
Asymmetric electron acceptor enables highly luminescent organic solar cells with certified efficiency over 18%
- 2022
-
Ingår i: Nature Communications. - : NATURE PORTFOLIO. - 2041-1723. ; 13:1
-
Tidskriftsartikel (refereegranskat)abstract
- Enhancing the luminescence property without sacrificing the charge collection is one key to high-performance organic solar cells (OSCs), while limited by the severe non-radiative charge recombination. Here, we demonstrate efficient OSCs with high luminescence via the design and synthesis of an asymmetric non-fullerene acceptor, BO-5Cl. Blending BO-5Cl with the PM6 donor leads to a record-high electroluminescence external quantum efficiency of 0.1%, which results in a low non-radiative voltage loss of 0.178 eV and a power conversion efficiency (PCE) over 15%. Importantly, incorporating BO-5Cl as the third component into a widely-studied donor:acceptor (D:A) blend, PM6:BO-4Cl, allows device displaying a high certified PCE of 18.2%. Our joint experimental and theoretical studies unveil that more diverse D:A interfacial conformations formed by asymmetric acceptor induce optimized blend interfacial energetics, which contributes to the improved device performance via balancing charge generation and recombination. High-performance organic solar cells call for novel designs of acceptor molecules. Here, He et al. design and synthesize a non-fullerene acceptor with an asymmetric structure for diverse donor:acceptor interfacial conformations and report a certificated power conversion efficiency of 18.2%.
|
|
| 3. |
- Li, Shuixing, et al.
(författare)
-
Unveiling structure-performance relationships from multi-scales in non-fullerene organic photovoltaics
- 2021
-
Ingår i: Nature Communications. - : Nature Publishing Group. - 2041-1723. ; 12:1
-
Tidskriftsartikel (refereegranskat)abstract
- Unveiling the correlations among molecular structures, morphological characteristics, macroscopic properties and device performances is crucial for developing better photovoltaic materials and achieving higher efficiencies. To achieve this goal, a comprehensive study is performed based on four state-of-the-art non-fullerene acceptors (NFAs), which allows to systematically examine the above-mentioned correlations from different scales. Its found that extending conjugation of NFA shows positive effects on charge separation promotion and non-radiative loss reduction, while asymmetric terminals can maximize benefits from both terminals. Another molecular optimization is from alkyl chain tuning. The shortened alkyl side chain results in strengthened terminal packing and decreased pi-pi distance, which contribute high carrier mobility and finally the high charge collection efficiency. With the most-acquired benefits from molecular structure and macroscopic factors, PM6:BTP-S9-based organic photovoltaics (OPVs) exhibit the optimal efficiency of 17.56% (certified: 17.4%) with a high fill factor of 78.44%, representing the best among asymmetric acceptor based OPVs. This work provides insight into the structure-performance relationships, and paves the way toward high-performance OPVs via molecular design. Understanding correlations between molecular structures and macroscopic properties is critical in realising highly efficient organic photovoltaics. Here, the authors conduct a comprehensive study based on four non-fullerene acceptors revealing how the extended conjugation, asymmetric terminals and alkyl chain length can affect device performance.
|
|
| 4. |
- Li, Yaokai, et al.
(författare)
-
Mechanism study on organic ternary photovoltaics with 18.3% certified efficiency: from molecule to device
- 2022
-
Ingår i: Energy & Environmental Science. - : ROYAL SOC CHEMISTRY. - 1754-5692 .- 1754-5706. ; 15:2, s. 855-865
-
Tidskriftsartikel (refereegranskat)abstract
- Multi-component organic photovoltaics (OPVs), e.g., ternary blends, are effective for high performance, while the fundamental understanding from the molecular to device level is lacking. To address this issue, we here systematically study the working mechanism of ternary OPVs based on non-fullerene acceptors (NFAs). With both molecular dynamics simulations and morphology characterization, we identify that when adding another larger band gap and highly miscible NFA, namely IT-4F or BTP-S2, into the PBDB-TF:BTP-eC9 blend, the NFAs undergo molecular intermixing selectively with BTP-eC9. This causes the composition-dependent band gap and charge recombination, and hence the composition-dependent V-OC. While the charge recombination still dominantly occurs at the PBDB-TF:BTP-eC9 interface, BTP-S2 or IT-4F plays an auxiliary role in facilitating charge transfer and suppressing non-radiative decay. Interestingly, intermolecular end-group packing in the intermixed blend is improved compared to that in pristine films, leading to higher carrier mobility. These synergistic effects significantly improve the power conversion efficiency of the device to an outstanding value of 18.7% (certified value of 18.3%).
|
|
| 5. |
- He, Chengliang, et al.
(författare)
-
Near infrared electron acceptors with a photoresponse beyond 1000 nm for highly efficient organic solar cells
- 2020
-
Ingår i: Journal of Materials Chemistry A. - : ROYAL SOC CHEMISTRY. - 2050-7488 .- 2050-7496. ; 8:35, s. 18154-18161
-
Tidskriftsartikel (refereegranskat)abstract
- Developing near infrared (NIR) organic semiconductors is indispensable for promoting the performance of organic solar cells (OSCs), but addressing the trade-off between voltage and current density thus achieving high efficiency with low energy loss is still an urgent challenge. Herein, NIR acceptors (H1, H2 and H3) with a photoresponse beyond 1000 nm were developed by conjugating dithienopyrrolobenzothiadiazole to 2-(5,6-difluoro-3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrileviavaried alkyl thiophene bridges. It was found that the linear outward chains in thiophene bridges could mitigate both the conformation disorder of H3 and the electronic disorder of the PBDB-T:H3 blends, which could help to form a favorable blend morphology, facilitating highly efficient photoelectric conversion in the resultant OSCs. As a result, devices based on PBDB-T:H3 achieve a high efficiency of 13.75% with a low energy loss of 0.55 eV, which is one of the highest efficiencies and the lowest energy loss among OSCs with an optoelectronic response near 1000 nm. This work provides a new design strategy towards NIR acceptors for efficient OSCs and future exploration of functional optoelectronics.
|
|
| 6. |
- Li, Shuixing, et al.
(författare)
-
Asymmetric Electron Acceptors for High-Efficiency and Low-Energy-Loss Organic Photovoltaics
- 2020
-
Ingår i: Advanced Materials. - : WILEY-V C H VERLAG GMBH. - 0935-9648 .- 1521-4095. ; 32
-
Tidskriftsartikel (refereegranskat)abstract
- Low energy loss and efficient charge separation under small driving forces are the prerequisites for realizing high power conversion efficiency (PCE) in organic photovoltaics (OPVs). Here, a new molecular design of nonfullerene acceptors (NFAs) is proposed to address above two issues simultaneously by introducing asymmetric terminals. Two NFAs, BTP-S1 and BTP-S2, are constructed by introducing halogenated indandione (A(1)) and 3-dicyanomethylene-1-indanone (A(2)) as two different conjugated terminals on the central fused core (D), wherein they share the same backbone as well-known NFA Y6, but at different terminals. Such asymmetric NFAs with A(1)-D-A(2) structure exhibit superior photovoltaic properties when blended with polymer donor PM6. Energy loss analysis reveals that asymmetric molecule BTP-S2 with six chlorine atoms attached at the terminals enables the corresponding devices to give an outstanding electroluminescence quantum efficiency of 2.3 x 10(-2)%, one order of magnitude higher than devices based on symmetric Y6 (4.4 x 10(-3)%), thus significantly lowering the nonradiative loss and energy loss of the corresponding devices. Besides, asymmetric BTP-S1 and BTP-S2 with multiple halogen atoms at the terminals exhibit fast hole transfer to the donor PM6. As a result, OPVs based on the PM6:BTP-S2 blend realize a PCE of 16.37%, higher than that (15.79%) of PM6:Y6-based OPVs. A further optimization of the ternary blend (PM6:Y6:BTP-S2) results in a best PCE of 17.43%, which is among the highest efficiencies for single-junction OPVs. This work provides an effective approach to simultaneously lower the energy loss and promote the charge separation of OPVs by molecular design strategy.
|
|
| 7. |
- Liu, Tao, et al.
(författare)
-
16% efficiency all-polymer organic solar cells enabled by a finely tuned morphology via the design of ternary blend
- 2021
-
Ingår i: Joule. - : CELL PRESS. - 2542-4351. ; 5:4, s. 914-930
-
Tidskriftsartikel (refereegranskat)abstract
- A SUMMARY There is an urgent demand for all-polymer organic solar cells (AP-OSCs) to gain higher efficiency. Here, we successfully improve the performance to 16.09% by introducing a small amount of BN-T, a B <- N-type polymer acceptor, into the PM6:PY-IT blend. It has been found that BN-T makes the active layer, based on the PM6:PY-IT:BN-T ternary blend, more crystalline but meanwhile slightly reduces the phase separation, leading to enhancement of both exciton harvesting and charge transport. From a thermodynamic viewpoint, BN-T prefers to reside between PM6 and PY-IT, and the fraction of this fine-tunes the morphology. Besides, a significantly reduced nonradiative energy loss occurs in the ternary blend, along with the coexistence of energy and charge transfer between the two acceptors. The progressive performance facilitated by these improved properties demonstrates that AP-OSCs can possibly comparably efficient with those based on small molecule acceptors, further enhancing the competitiveness of this device type.
|
|
| 8. |
- Marinins, Aleksandrs, et al.
(författare)
-
Photostable Polymer/Si Nanocrystal Bulk Hybrids with Tunable Photoluminescence
- 2016
-
Ingår i: ACS Photonics. - : American Chemical Society (ACS). - 2330-4022. ; 3:9, s. 1575-1580
-
Tidskriftsartikel (refereegranskat)abstract
- Solid polymer/Si nanocrystal bulk nanocomposites were fabricated from solutions of alkene- and hydride-terminated silicon nanocrystals (NCs) in toluene. The photoluminescence peak position of hydride-terminated SiNCs before polymerization was tuned by photoassisted hydrofluoric acid etching. Optical properties of obtained PMMA/NC hybrids, such as quantum yield, luminescence lifetime, and dispersion factor, were evaluated over time. Photostability of these transparent bulk polymer/SiNC hybrids over months was confirmed. The emission covers the visible to near-infrared range with a quantum yield of similar to 30-40% for yellow-red nanocomposites.
|
|
| 9. |
- Zhan, Lingling, et al.
(författare)
-
A Near-Infrared Photoactive Morphology Modifier Leads to Significant Current Improvement and Energy Loss Mitigation for Ternary Organic Solar Cells
- 2018
-
Ingår i: Advanced Science. - : WILEY. - 2198-3844. ; 5:8
-
Tidskriftsartikel (refereegranskat)abstract
- Herein, efficient organic solar cells (OSCs) are realized with the ternary blend of a medium band gap donor (poly[(2,6-(4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)-benzo[1,2-b:4,5-b]dithiophene))-alt-(5,5-(1,3-di-2-thienyl-5,7-bis(2-ethylhexyl)benzo[1,2-c:4,5-c]dithiophene-4,8-dione)] (PBDB-T)) with a low band gap acceptor (2,2-((2Z,2Z)-(((2,5-difluoro-1,4-phenylene)bis(4,4-bis(2-ethylhexyl)-4H-cyclopenta[2,1-b:3,4-b]dithiophene-6,2-diyl))bis(methanylylidene))bis(5,6-difluoro-3-oxo-2,3-dihydro-1H-indene-2,1-diylidene))dimalononitrile (HF-PCIC)) and a near-infrared acceptor (2,2-((2Z,2Z)-(((4,4,9,9-tetrakis(4-hexylphenyl)-4,9-dihydro-s-indaceno[1,2-b:5,6-b]dithiophene-2,7-diyl)bis(4-((2-ethylhexyl)oxy)thiophene-5,2-diyl))bis(methanylylidene))bis(5,6-difluoro-3-oxo-2,3-dihydro-1H-indene-2,1-diylidene))dimalononitrile (IEICO-4F)). It is shown that the introduction of IEICO-4F third component into PBDB-T:HF-PCIC blend increases the short-circuit current density (J(sc)) of the ternary OSC to 23.46 mA cm(-2), with a 44% increment over those of binary devices. The significant current improvement originates from the broadened absorption range and the active layer morphology optimization through the introduction of IEICO-4F component. Furthermore, the energy loss of the ternary cells (0.59 eV) is much decreased over that of the binary cells (0.80 eV) due to the reduction of both radiative recombination from the absorption below the band gap and nonradiative recombination upon the addition of IEICO-4F. Therefore, the power conversion efficiency increases dramatically from 8.82% for the binary cells to 11.20% for the ternary cells. This work provides good examples for simultaneously achieving both significant current enhancement and energy loss mitigation in OSCs, which would lead to the further construction of highly efficient ternary OSCs.
|
|
