1. |
- Beal, Jacob, et al.
(författare)
-
Robust estimation of bacterial cell count from optical density
- 2020
-
Ingår i: Communications Biology. - : Springer Science and Business Media LLC. - 2399-3642. ; 3:1
-
Tidskriftsartikel (refereegranskat)abstract
- Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data.
|
|
2. |
- Kristanl, Matej, et al.
(författare)
-
The Seventh Visual Object Tracking VOT2019 Challenge Results
- 2019
-
Ingår i: 2019 IEEE/CVF INTERNATIONAL CONFERENCE ON COMPUTER VISION WORKSHOPS (ICCVW). - : IEEE COMPUTER SOC. - 9781728150239 ; , s. 2206-2241
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge VOT2019 is the seventh annual tracker benchmarking activity organized by the VOT initiative. Results of 81 trackers are presented; many are state-of-the-art trackers published at major computer vision conferences or in journals in the recent years. The evaluation included the standard VOT and other popular methodologies for short-term tracking analysis as well as the standard VOT methodology for long-term tracking analysis. The VOT2019 challenge was composed of five challenges focusing on different tracking domains: (i) VOT-ST2019 challenge focused on short-term tracking in RGB, (ii) VOT-RT2019 challenge focused on "real-time" short-term tracking in RGB, (iii) VOT-LT2019 focused on long-term tracking namely coping with target disappearance and reappearance. Two new challenges have been introduced: (iv) VOT-RGBT2019 challenge focused on short-term tracking in RGB and thermal imagery and (v) VOT-RGBD2019 challenge focused on long-term tracking in RGB and depth imagery. The VOT-ST2019, VOT-RT2019 and VOT-LT2019 datasets were refreshed while new datasets were introduced for VOT-RGBT2019 and VOT-RGBD2019. The VOT toolkit has been updated to support both standard short-term, long-term tracking and tracking with multi-channel imagery. Performance of the tested trackers typically by far exceeds standard baselines. The source code for most of the trackers is publicly available from the VOT page. The dataset, the evaluation kit and the results are publicly available at the challenge website(1).
|
|
3. |
- Arzoumanian, Doris, et al.
(författare)
-
Dust polarized emission observations of NGC 6334: BISTRO reveals the details of the complex but organized magnetic field structure of the high-mass star-forming hub-filament network
- 2021
-
Ingår i: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 647
-
Tidskriftsartikel (refereegranskat)abstract
- Context. Molecular filaments and hubs have received special attention recently thanks to new studies showing their key role in star formation. While the (column) density and velocity structures of both filaments and hubs have been carefully studied, their magnetic field (B-field) properties have yet to be characterized. Consequently, the role of B-fields in the formation and evolution of hub-filament systems is not well constrained. Aims. We aim to understand the role of the B-field and its interplay with turbulence and gravity in the dynamical evolution of the NGC 6334 filament network that harbours cluster-forming hubs and high-mass star formation. Methods. We present new observations of the dust polarized emission at 850 μm toward the 2 pc × 10 pc map of NGC 6334 at a spatial resolution of 0.09 pc obtained with the James Clerk Maxwell Telescope (JCMT) as part of the B-field In STar-forming Region Observations (BISTRO) survey. We study the distribution and dispersion of the polarized intensity (PI), the polarization fraction (PF), and the plane-of-The-sky B-field angle (χB_POS) toward the whole region, along the 10 pc-long ridge and along the sub-filaments connected to the ridge and the hubs. We derived the power spectra of the intensity and χBPOS along the ridge crest and compared them with the results obtained from simulated filaments. Results. The observations span 3 orders of magnitude in Stokes I and PI and 2 orders of magnitude in PF (from 0.2 to 20%). A large scatter in PI and PF is observed for a given value of I. Our analyses show a complex B-field structure when observed over the whole region ( 10 pc); however, at smaller scales (1 pc), χBPOS varies coherently along the crests of the filament network. The observed power spectrum of χBPOS can be well represented with a power law function with a slope of-1.33 ± 0.23, which is 20% shallower than that of I. We find that this result is compatible with the properties of simulated filaments and may indicate the physical processes at play in the formation and evolution of star-forming filaments. Along the sub-filaments, χBPOS rotates frombeing mostly perpendicular or randomly oriented with respect to the crests to mostly parallel as the sub-filaments merge with the ridge and hubs. This variation of the B-field structure along the sub-filaments may be tracing local velocity flows of infalling matter in the ridge and hubs. Our analysis also suggests a variation in the energy balance along the crests of these sub-filaments, from magnetically critical or supercritical at their far ends to magnetically subcritical near the ridge and hubs. We also detect an increase in PF toward the high-column density (NH2 â 1023 cm-2) star cluster-forming hubs. These latter large PF values may be explained by the increase in grain alignment efficiency due to stellar radiation from the newborn stars, combined with an ordered B-field structure. Conclusions. These observational results reveal for the first time the characteristics of the small-scale (down to 0.1 pc) B-field structure of a 10 pc-long hub-filament system. Our analyses show variations in the polarization properties along the sub-filaments that may be tracing the evolution of their physical properties during their interaction with the ridge and hubs. We also detect an impact of feedback from young high-mass stars on the local B-field structure and the polarization properties, which could put constraints on possible models for dust grain alignment and provide important hints as to the interplay between the star formation activity and interstellar B-fields.
|
|
4. |
- Ching, Tao-Chung, et al.
(författare)
-
The JCMT BISTRO-2 Survey: Magnetic Fields of the Massive DR21 Filament
- 2022
-
Ingår i: Astrophysical Journal. - : American Astronomical Society. - 1538-4357 .- 0004-637X. ; 941:2
-
Tidskriftsartikel (refereegranskat)abstract
- We present 850 mu m dust polarization observations of the massive DR21 filament from the B-fields In STar-forming Region Observations (BISTRO) survey, using the POL-2 polarimeter and the SCUBA-2 camera on the James Clerk Maxwell Telescope. We detect ordered magnetic fields perpendicular to the parsec-scale ridge of the DR21 main filament. In the subfilaments, the magnetic fields are mainly parallel to the filamentary structures and smoothly connect to the magnetic fields of the main filament. We compare the POL-2 and Planck dust polarization observations to study the magnetic field structures of the DR21 filament on 0.1-10 pc scales. The magnetic fields revealed in the Planck data are well-aligned with those of the POL-2 data, indicating a smooth variation of magnetic fields from large to small scales. The plane-of-sky magnetic field strengths derived from angular dispersion functions of dust polarization are 0.6-1.0 mG in the DR21 filament and similar to 0.1 mG in the surrounding ambient gas. The mass-to-flux ratios are found to be magnetically supercritical in the filament and slightly subcritical to nearly critical in the ambient gas. The alignment between column density structures and magnetic fields changes from random alignment in the low-density ambient gas probed by Planck to mostly perpendicular in the high-density main filament probed by James Clerk Maxwell Telescope. The magnetic field structures of the DR21 filament are in agreement with MHD simulations of a strongly magnetized medium, suggesting that magnetic fields play an important role in shaping the DR21 main filament and subfilaments.
|
|
5. |
- Doi, Yasuo, et al.
(författare)
-
The JCMT BISTRO Survey: Magnetic Fields Associated with a Network of Filaments in NGC 1333
- 2020
-
Ingår i: Astrophysical Journal. - : American Astronomical Society. - 1538-4357 .- 0004-637X. ; 899:1
-
Tidskriftsartikel (refereegranskat)abstract
- We present new observations of the active star formation region NGC 1333 in the Perseus molecular cloud complex from the James Clerk Maxwell Telescope B-Fields In Star-forming Region Observations (BISTRO) survey with the POL-2 instrument. The BISTRO data cover the entire NGC 1333 complex (∼1.5 pc ? 2 pc) at 0.02 pc resolution and spatially resolve the polarized emission from individual filamentary structures for the first time. The inferred magnetic field structure is complex as a whole, with each individual filament aligned at different position angles relative to the local field orientation. We combine the BISTRO data with low- and high- resolution data derived from Planck and interferometers to study the multiscale magnetic field structure in this region. The magnetic field morphology drastically changes below a scale of ∼1 pc and remains continuous from the scales of filaments (∼0.1 pc) to that of protostellar envelopes (∼0.005 pc or ∼1000 au). Finally, we construct simple models in which we assume that the magnetic field is always perpendicular to the long axis of the filaments. We demonstrate that the observed variation of the relative orientation between the filament axes and the magnetic field angles are well reproduced by this model, taking into account the projection effects of the magnetic field and filaments relative to the plane of the sky. These projection effects may explain the apparent complexity of the magnetic field structure observed at the resolution of BISTRO data toward the filament network.
|
|
6. |
- Eswaraiah, Chakali, et al.
(författare)
-
The JCMT BISTRO Survey: Revealing the Diverse Magnetic Field Morphologies in Taurus Dense Cores with Sensitive Submillimeter Polarimetry
- 2021
-
Ingår i: Astrophysical Journal Letters. - : American Astronomical Society. - 2041-8213 .- 2041-8205. ; 912:2
-
Tidskriftsartikel (refereegranskat)abstract
- We have obtained sensitive dust continuum polarization observations at 850 μm in the B213 region of Taurus using POL-2 on SCUBA-2 at the James Clerk Maxwell Telescope as part of the B-fields in STar-forming Region Observations (BISTRO) survey. These observations allow us to probe magnetic field (B-field) at high spatial resolution (∼2000 au or ∼0.01 pc at 140 pc) in two protostellar cores (K04166 and K04169) and one prestellar core (Miz-8b) that lie within the B213 filament. Using the Davis-Chandrasekhar-Fermi method, we estimate the B-field strengths in K04166, K04169, and Miz-8b to be 38 ± 14, 44 ± 16, and 12 ± 5 μG, respectively. These cores show distinct mean B-field orientations. The B-field in K04166 is well ordered and aligned parallel to the orientations of the core minor axis, outflows, core rotation axis, and large-scale uniform B-field, in accordance with magnetically regulated star formation via ambipolar diffusion taking place in K04166. The B-field in K04169 is found to be ordered but oriented nearly perpendicular to the core minor axis and large-scale B-field and not well correlated with other axes. In contrast, Miz-8b exhibits a disordered B-field that shows no preferred alignment with the core minor axis or large-scale field. We found that only one core, K04166, retains a memory of the large-scale uniform B-field. The other two cores, K04169 and Miz-8b, are decoupled from the large-scale field. Such a complex B-field configuration could be caused by gas inflow onto the filament, even in the presence of a substantial magnetic flux.
|
|
7. |
- Haw, Shu Chih, et al.
(författare)
-
Unusual mixed spin-state of Co3+ in the ground state of LaSrCoO4: Combined high-pressure and high-temperature study
- 2020
-
Ingår i: Journal of Alloys and Compounds. - : Elsevier BV. - 0925-8388.
-
Tidskriftsartikel (refereegranskat)abstract
- The nature of the non-magnetic to paramagnetic transition of Co3+ oxide LaCoO3 was strongly disputed in the literature for many decades from a low-spin (LS) state below 20 K and to a mixed LS state and high-spin (HS) state or an intermediate-spin (IS) state above 100 K. In this context, the layered perovskite LaSrCoO4 is more favorable for a Jahn-Teller-active IS state because of an elongated distortion, but has been scarcely studied with experimental X-ray spectroscopies as a function of temperature or external pressure. Here, our Co-L2,3 X-ray absorption spectroscopic study indicates a mixture of 40% HS-Co3+ and 60% LS-Co3+ for LaSrCoO4 against 25% HS-Co3+ and 75% LS-Co3+ for LaCoO3 at 300 K and ambient pressure (AP). At 10 K, we observed a sizable magnetic-circular-dichroism signal and a clear HS state of the magnetic Co3+ ion from the Co-L2,3 edge of LaSrCoO4. This result demonstrates that the HS state is already populated in the ground state versus a pure LS ground state in LaCoO3. A quantitative change of quantum number of the spin of the Co3+ ion of LaSrCoO4 as a function of pressure and temperature investigated systematically with Co-Kβ X-ray emission experiments firmly demonstrates not only a mixed state of LS/HS at 300 K and AP but also a presence of the pure LS-Co3+ and HS-Co3+ states only under high pressure and high temperature, respectively.
|
|
8. |
- Karoly, Janik, et al.
(författare)
-
The JCMT BISTRO Survey: Studying the Complex Magnetic Field of L43
- 2023
-
Ingår i: Astrophysical Journal. - 1538-4357 .- 0004-637X. ; 952:1
-
Tidskriftsartikel (refereegranskat)abstract
- We present observations of polarized dust emission at 850 mu m from the L43 molecular cloud, which sits in the Ophiuchus cloud complex. The data were taken using SCUBA-2/POL-2 on the James Clerk Maxwell Telescope as a part of the BISTRO large program. L43 is a dense (N-H2 similar to 10(22) - 10(23) cm(-2)) complex molecular cloud with a submillimeter-bright starless core and two protostellar sources. There appears to be an evolutionary gradient along the isolated filament that L43 is embedded within, with the most evolved source closest to the Sco OB2 association. One of the protostars drives a CO outflow that has created a cavity to the southeast. We see a magnetic field that appears to be aligned with the cavity walls of the outflow, suggesting interaction with the outflow. We also find a magnetic field strength of up to similar to 160 +/- 30 mu G in the main starless core and up to similar to 90 +/- 40 mu G in the more diffuse, extended region. These field strengths give magnetically super- and subcritical values, respectively, and both are found to be roughly trans-Alfvenic. We also present a new method of data reduction for these denser but fainter objects like starless cores.
|
|
9. |
- Kwon, Woojin, et al.
(författare)
-
B-fields in Star-forming Region Observations (BISTRO): Magnetic Fields in the Filamentary Structures of Serpens Main
- 2022
-
Ingår i: Astrophysical Journal. - : American Astronomical Society. - 1538-4357 .- 0004-637X. ; 926:2
-
Tidskriftsartikel (refereegranskat)abstract
- We present 850 mu m polarimetric observations toward the Serpens Main molecular cloud obtained using the POL-2 polarimeter on the James Clerk Maxwell Telescope as part of the B-fields In STar-forming Region Observations survey. These observations probe the magnetic field morphology of the Serpens Main molecular cloud on about 6000 au scales, which consists of cores and six filaments with different physical properties such as density and star formation activity. Using the histogram of relative orientation (HRO) technique, we find that magnetic fields are parallel to filaments in less-dense filamentary structures where NH2 < 0.93 x 10(22) cm(-2) (magnetic fields perpendicular to density gradients), while they are perpendicular to filaments (magnetic fields parallel to density gradients) in dense filamentary structures with star formation activity. Moreover, applying the HRO technique to denser core regions, we find that magnetic field orientations change to become perpendicular to density gradients again at NH2 approximate to 4.6 x 10(22) NH2 approximate to 16 x 10(22) cm(-2), magnetic fields change back to being parallel to density gradients once again, which can be understood to be due to magnetic fields being dragged in by infalling material. In addition, we estimate the magnetic field strengths of the filaments (B-POS = 60-300 mu G)) using the Davis-Chandrasekhar-Fermi method and discuss whether the filaments are gravitationally unstable based on magnetic field and turbulence energy densities.
|
|
10. |
- Lyo, A-Ran, et al.
(författare)
-
The JCMT BISTRO Survey: An 850/450 mu m Polarization Study of NGC 2071IR in Orion B
- 2021
-
Ingår i: Astrophysical Journal. - : American Astronomical Society. - 1538-4357 .- 0004-637X. ; 918:2
-
Tidskriftsartikel (refereegranskat)abstract
- We present the results of simultaneous 450 mu m and 850 mu m polarization observations toward the massive star-forming region NGC 2071IR, a target of the BISTRO (B-fields in STar-forming Region Observations) Survey, using the POL-2 polarimeter and SCUBA-2 camera mounted on the James Clerk Maxwell Telescope. We find a pinched magnetic field morphology in the central dense core region, which could be due to a rotating toroidal disklike structure and a bipolar outflow originating from the central young stellar object IRS 3. Using the modified Davis-Chandrasekhar-Fermi method, we obtain a plane-of-sky magnetic field strength of 563 +/- 421 mu G in the central similar to 0.12 pc region from 850 mu m polarization data. The corresponding magnetic energy density of 2.04 x 10(-8) erg cm(-3) is comparable to the turbulent and gravitational energy densities in the region. We find that the magnetic field direction is very well aligned with the whole of the IRS 3 bipolar outflow structure. We find that the median value of polarization fractions is 3.0% at 450 mu m in the central 3 ' region, which is larger than the median value of 1.2% at 850 mu m. The trend could be due to the better alignment of warmer dust in the strong radiation environment. We also find that polarization fractions decrease with intensity at both wavelengths, with slopes, determined by fitting a Rician noise model of 0.59 +/- 0.03 at 450 mu m and 0.36 +/- 0.04 at 850 mu m, respectively. We think that the shallow slope at 850 mu m is due to grain alignment at the center being assisted by strong radiation from the central young stellar objects.
|
|
11. |
- Ngoc, Nguyen Bich, et al.
(författare)
-
Observations of Magnetic Fields Surrounding LkH alpha 101 Taken by the BISTRO Survey with JCMT-POL-2
- 2021
-
Ingår i: Astrophysical Journal. - : American Astronomical Society. - 1538-4357 .- 0004-637X. ; 908:1
-
Tidskriftsartikel (refereegranskat)abstract
- We report the first high spatial resolution measurement of magnetic fields surrounding LkH alpha 101, part of the Auriga-California molecular cloud. The observations were taken with the POL-2 polarimeter on the James Clerk Maxwell Telescope within the framework of the B-fields In Star-forming Region Observations (BISTRO) survey. Observed polarization of thermal dust emission at 850 mu m is found to be mostly associated with the redshifted gas component of the cloud. The magnetic field displays a relatively complex morphology. Two variants of the Davis-Chandrasekhar-Fermi method, unsharp masking and structure function, are used to calculate the strength of magnetic fields in the plane of the sky, yielding a similar result of B-POS similar to 115 mu G. The mass-to-magnetic-flux ratio in critical value units, lambda similar to 0.3, is the smallest among the values obtained for other regions surveyed by POL-2. This implies that the LkH alpha 101 region is subcritical, and the magnetic field is strong enough to prevent gravitational collapse. The inferred delta B/B-0 similar to 0.3 implies that the large-scale component of the magnetic field dominates the turbulent one. The variation of the polarization fraction with total emission intensity can be fitted by a power law with an index of alpha = 0.82 0.03, which lies in the range previously reported for molecular clouds. We find that the polarization fraction decreases rapidly with proximity to the only early B star (LkH alpha 101) in the region. Magnetic field tangling and the joint effect of grain alignment and rotational disruption by radiative torques can potentially explain such a decreasing trend.
|
|
12. |
- Tahani, Mehrnoosh, et al.
(författare)
-
JCMT BISTRO Observations: Magnetic Field Morphology of Bubbles Associated with NGC 6334
- 2023
-
Ingår i: Astrophysical Journal. - : American Astronomical Society. - 1538-4357 .- 0004-637X. ; 944:2
-
Tidskriftsartikel (refereegranskat)abstract
- We study the Hii regions associated with the NGC 6334 molecular cloud observed in the submillimeter and taken as part of the B-fields In STar-forming Region Observations Survey. In particular, we investigate the polarization patterns and magnetic field morphologies associated with these Hii regions. Through polarization pattern and pressure calculation analyses, several of these bubbles indicate that the gas and magnetic field lines have been pushed away from the bubble, toward an almost tangential (to the bubble) magnetic field morphology. In the densest part of NGC 6334, where the magnetic field morphology is similar to an hourglass, the polarization observations do not exhibit observable impact from Hii regions. We detect two nested radial polarization patterns in a bubble to the south of NGC 6334 that correspond to the previously observed bipolar structure in this bubble. Finally, using the results of this study, we present steps (incorporating computer vision; circular Hough transform) that can be used in future studies to identify bubbles that have physically impacted magnetic field lines.
|
|
13. |
- Hwang, Jihye, et al.
(författare)
-
The JCMT BISTRO Survey: A Spiral Magnetic Field in a Hub-filament Structure, Monoceros R2
- 2022
-
Ingår i: Astrophysical Journal. - : American Astronomical Society. - 1538-4357 .- 0004-637X. ; 941:1
-
Tidskriftsartikel (refereegranskat)abstract
- We present and analyze observations of polarized dust emission at 850 μm toward the central 1 × 1 pc hub-filament structure of Monoceros R2 (Mon R2). The data are obtained with SCUBA-2/POL-2 on the James Clerk Maxwell Telescope (JCMT) as part of the B-fields in Star-forming Region Observations survey. The orientations of the magnetic field follow the spiral structure of Mon R2, which are well described by an axisymmetric magnetic field model. We estimate the turbulent component of the magnetic field using the angle difference between our observations and the best-fit model of the underlying large-scale mean magnetic field. This estimate is used to calculate the magnetic field strength using the Davis–Chandrasekhar–Fermi method, for which we also obtain the distribution of volume density and velocity dispersion using a column density map derived from Herschel data and the C18O (J = 3 - 2) data taken with HARP on the JCMT, respectively. We make maps of magnetic field strengths and mass-to-flux ratios, finding that magnetic field strengths vary from 0.02 to 3.64 mG with a mean value of 1.0 ± 0.06 mG, and the mean critical mass-to-flux ratio is 0.47 ± 0.02. Additionally, the mean Alfvén Mach number is 0.35 ± 0.01. This suggests that, in Mon R2, the magnetic fields provide resistance against large-scale gravitational collapse, and the magnetic pressure exceeds the turbulent pressure. We also investigate the properties of each filament in Mon R2. Most of the filaments are aligned along the magnetic field direction and are magnetically subcritical.
|
|
14. |
- Bhat, Goutam, et al.
(författare)
-
NTIRE 2022 Burst Super-Resolution Challenge
- 2022
-
Ingår i: 2022 IEEE/CVF CONFERENCE ON COMPUTER VISION AND PATTERN RECOGNITION WORKSHOPS (CVPRW 2022). - : IEEE. - 9781665487399 - 9781665487405 ; , s. 1040-1060
-
Konferensbidrag (refereegranskat)abstract
- Burst super-resolution has received increased attention in recent years due to its applications in mobile photography. By merging information from multiple shifted images of a scene, burst super-resolution aims to recover details which otherwise cannot be obtained using a simple input image. This paper reviews the NTIRE 2022 challenge on burst super-resolution. In the challenge, the participants were tasked with generating a clean RGB image with 4x higher resolution, given a RAW noisy burst as input. That is, the methods need to perform joint denoising, demosaicking, and super-resolution. The challenge consisted of 2 tracks. Track 1 employed synthetic data, where pixel-accurate high-resolution ground truths are available. Track 2 on the other hand used real-world bursts captured from a handheld camera, along with approximately aligned reference images captured using a DSLR. 14 teams participated in the final testing phase. The top performing methods establish a new state-of-the-art on the burst super-resolution task.
|
|
15. |
- Haw, Shu Chih, et al.
(författare)
-
Single antiferromagnetic axis of Fe in orthorhombic YMn0.5Fe0.5O3 films observed by x-ray magnetic linear dichroism
- 2019
-
Ingår i: Journal of Alloys and Compounds. - : Elsevier BV. - 0925-8388. ; 780, s. 79-84
-
Tidskriftsartikel (refereegranskat)abstract
- The electronic and magnetic structure of orthorhombic (o-) YMn0.5Fe0.5O3 (YMFO) epitaxial film (space group Pbnm) deposited on the YAlO3 (010) substrate have been investigated using linear polarization-dependent x-ray absorption spectroscopy and magnetization measurements. The magnetic-ordering temperature of around 280 K is observed in o-YMFO film. The x-ray absorption spectra at the Fe-K and the Mn-K edges indicate the existence of anisotropic crystal field in o-YMFO film, with the longest and shortest Fe–O and Mn–O bonds tend to align with the crystallographic b- and a-axis, respectively, whereas the medium Fe(Mn)–O bond is aligned with the c-axis. The experimental x-ray magnetic linear dichroism at the Fe-L2 edges demonstrate an unusual single antiferromagnetic axis of Fe3+ ions below magnetic-ordering temperature, while a multi antiferromagnetic axis is generally observed in o-RFeO3 (R = rare earth) thin films. Our configuration-interaction cluster calculations also reveal that the single antiferromagnetic axis of the Fe sublattice is aligned with the b-axis in o-YMFO film, whereas it is directed along the a-axis in the bulk o-YFeO3.
|
|
16. |
- Zhao, Zhiwei, et al.
(författare)
-
A subsequent-machining-deformation prediction method based on the latent field estimation using deformation force
- 2022
-
Ingår i: Journal of manufacturing systems. - : Elsevier BV. - 0278-6125 .- 1878-6642. ; 63, s. 224-237
-
Tidskriftsartikel (refereegranskat)abstract
- Machining deformation control for large structural parts is an intractable problem, which is highly important for the dimensional accuracy and fatigue life of parts, and deformation prediction is the basis for deformation control. Existing prediction methods rely on the measurement of residual stress, which is limited by the measurement accuracy of residual stress distributed within thick blanks, and it is still a worldwide challenge. To address the above issue, this paper proposes a machining deformation prediction method based on estimation of latent filed for residual stress field using deformation force. The residual stress field is represented by latent field, which is estimated by deformation force monitoring data during the machining process based on the proposed physical-field estimation neural network. The estimated latent field is used to predict the subsequent deformation force and deformation via an inference network by combining the machining process information. The proposed method is verified by both simulation and actual environment, and it can provide a helpful reference for other machining related difficult-to-measure field.
|
|
17. |
- Argirion, Ilona, et al.
(författare)
-
Comparative Analysis of the Humoral Immune Response to the EBV Proteome across EBV-Related Malignancies
- 2023
-
Ingår i: Cancer Epidemiology, Biomarkers and Prevention. - : American Association For Cancer Research (AACR). - 1055-9965 .- 1538-7755. ; 32:5, s. 687-696
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Epstein-Barr virus (EBV) is linked to multiple cancers, including classical Hodgkin lymphoma (cHL), endemic Burkitt lymphoma (eBL), nasopharyngeal carcinoma (NPC), and extranodal natural killer/T-cell lymphoma (NKTCL).Methods: Anti-EBV IgG and IgA antibody responses target-ing 202 sequences from 86 EBV proteins were measured using the same EBV whole proteome array across four case-control studies investigating EBV-positive cHL, eBL, NPC, and NKTCL (407 cases/620 controls). We grouped EBV-targeted antibodies into pathways by immunoglobulin type (IgA and IgG) and life-cycle stage (latent, immediate early lytic, early lytic, late lytic, and glycoprotein) and evaluated their associ-ation with each cancer type. In an additional analysis, we focused on the subset of 46 individual antibodies repre-senting the top candidates for each cancer and compared their associations across the four cancer types using multivariable linear regression models.Results: IgA antibody responses targeting all EBV life-cycle stages were associated with NPC but limited to anti-early lytic stage for cHL. NPC and eBL were associated with IgG antibodies across the viral life cycle; cHL with antibodies in the early lytic, late lytic and glyco-protein stages; and NKTCL with antibodies in the latent, immediate early lytic and early lytic phases. EBNA3A, BBLF1, BDLF4, and BLRF2 IgG antibodies were associated with all cancer types.Conclusions: Our observed similarities and differences across four EBV-associated cancers may inform EBV-related oncogenesis.Impact: Understanding the comparative humoral immune response across EBV-related cancers may aid in identifying shared etiologic roles of EBV proteins and inform unique pathogenic processes for each cancer.
|
|
18. |
- Chang, Y. S., et al.
(författare)
-
Extending on-chip interconnects for rack-level remote resource access
- 2016
-
Ingår i: Proceedings of the 34th IEEE International Conference on Computer Design, ICCD 2016. - 1063-6404. - 9781509051427 ; , s. 56-63
-
Konferensbidrag (refereegranskat)abstract
- The need to perform data analytics on exploding data volumes coupled with the rapidly changing workloads in cloud computing places great pressure on data-center servers. To improve hardware resource utilization across servers within a rack, we propose Direct Extension of On-chip Interconnects (DEOI), a high-performance and efficient architecture for remote resource access among server nodes. DEOI extends an SoC server node's on-chip interconnect to access resources in adjacent nodes with no protocol changes, allowing remote memory and network resources to be used as if they were local. Our results on a four-node FPGA prototype show that the latency of user-level, cross-node, random reads to DEOI-connected remote memory is as low as 1.16?s, which beats current commercial technologies. We exploit DEOI remote access to improve performance of the Redis in-memory key-value framework by 47%. When using DEOI to access remote network resources, we observe an 8.4% average performance degradation and only a 2.52?s ping-pong latency disparity compared to using local assets. These results suggest that DEOI can be a promising mechanism for increasing both performance and efficiency in next-generation data-center servers.
|
|
19. |
- Chen, Bin, et al.
(författare)
-
Full-colour luminescent compounds based on anthracene and 2,2 '-dipyridylamine
- 2013
-
Ingår i: Journal of Materials Chemistry C. - : Royal Society of Chemistry (RSC). - 2050-7526 .- 2050-7534. ; 1:44, s. 7409-7417
-
Tidskriftsartikel (refereegranskat)abstract
- Starting from two simple units of anthracene and 2,2'-dipyridylamine, a series of new luminescent compounds 1-8 were designed and synthesized by a combined strategy of changing the connection mode between the two units, extending the conjugation size, and introducing an additional electron donor. Photophysical properties of 1-8 were investigated and discussed on the basis of solvatochromic behaviour, theoretical calculations, crystal structure, and optimized structures. Interestingly, the emission wavelengths of these compounds could be successfully tuned from violet to red both in solutions and the solid-state, and prominent positive solvatochromism was observed for the compounds with a D-p-A framework. Consider compound 7 as an example, it shows peaks at 526 nm and 627 nm in cyclohexane and DMSO, respectively. Meanwhile, the quantum yield was decreased from 0.80 in cyclohexane to 0.12 in DMSO. The introduction of bulky groups was demonstrated to be effective for suppressing the aggregation effect and thus improving the solid state emission quantum yield. These results indicate that the combined structure modulation strategy offers a powerful tool for tuning the emission behaviour. To demonstrate the possibility of practical applications, 2 was employed as the emitting material for the fabrication of deep-blue organic light-emitting diodes (OLEDs), which showed a maximum external quantum efficiency of 2.2%. The CIE coordinates of (0.15, 0.08) are indicative of excellent blue color purity.
|
|
20. |
- Chen, Junsong, et al.
(författare)
-
Inference Method for Residual Stress Field of Titanium Alloy Parts Based on Latent Gaussian Process Introducing Theoretical Prior
- 2024
-
Ingår i: Transactions of Nanjing University of Aeronautics and Astronautics. - : Nanjing University of Aeronautics an Astronautics. - 1005-1120. ; 41:2, s. 135-146
-
Tidskriftsartikel (refereegranskat)abstract
- Residual stress (RS) within titanium alloy structural components is the primary factor contributing to machining deformation. It comprises initial residual stress (IRS) and machined surface residual stress (MSRS), resulting from the interplay between IRS and high-level machining-induced residual stress MIRS). Machining deformation of components poses a significant challenge in the aerospace industry,and accurately assessing RS is crucial for precise prediction and control. However, current RS prediction methods struggle to account for various uncertainties in the component manufacturing process,leading to limited prediction accuracy. Furthermore, existing measurement methods can only gauge local RS in samples,which proves inefficient and unreliable for measuring RS fields in large components. Addressing these challenges, this paper introduces a method for simultaneously estimating IRS and MSRS within titanium alloy aircraft components using a Bayesian framework. This approach treats IRS and MSRS as unobservable fields modeled by Gaussian processes. It leverages observable deformation force data to estimate IRS and MSRS while incorporating prior correlations between MSRS fields. In this context,the prior correlation between MSRS fields is represented as a latent Gaussian process with a shared covariance function. The proposed method offers an effective means of estimating the RS field using deformation force data from a probabilistic perspective. It serves as a dependable foundation for optimizing subsequent deformation control strategies.
|
|
21. |
- Chen, Zhiwei, et al.
(författare)
-
A Continuous Model for Designing Corridor Systems with Modular Autonomous Vehicles Enabling Station-wise Docking
- 2022
-
Ingår i: Transportation Science. - : Institute for Operations Research and the Management Sciences (INFORMS). - 0041-1655 .- 1526-5447. ; 56:1, s. 1-30
-
Tidskriftsartikel (refereegranskat)abstract
- The "asymmetry" between spatiotemporally varying passenger demand and fixed-capacity transportation supply has been a long-standing problem in urban mass transportation (UMT) systems around the world. The emerging modular autonomous vehicle (MAV) technology offers us an opportunity to close the substantial gap between passenger demand and vehicle capacity through station-wise docking and undocking operations. However, there still lacks an appropriate approach that can solve the operational design problem for UMT corridor systems with MAVs efficiently. To bridge this methodological gap, this paper proposes a continuum approximation (CA) model that can offer near-optimal solutions to the operational design for MAV-based transit corridors very efficiently. We investigate the theoretical properties of the optimal solutions to the investigated problem in a certain (yet not uncommon) case. These theoretical properties allow us to estimate the seat demand of each time neighborhood with the arrival demand curves, which recover the "local impact" property of the investigated problem. With the property, a CA model is properly formulated to decompose the original problem into a finite number of subproblems that can be analytically solved. A discretization heuristic is then proposed to convert the analytical solution from the CA model to feasible solutions to the original problem. With two sets of numerical experiments, we show that the proposed CA model can achieve near-optimal solutions (with gaps less than 4% for most cases) to the investigated problem in almost no time (less than 10 ms) for large-scale instances with a wide range of parameter settings (a commercial solver may even not obtain a feasible solution in several hours). The theoretical properties are verified, and managerial insights regarding how input parameters affect system performance are provided through these numerical results. Additionally, results also reveal that, although the CA model does not incorporate vehicle repositioning decisions, the timetabling decisions obtained by solving the CA model can be easily applied to obtain near-optimal repositioning decisions (with gaps less than 5% in most instances) very efficiently (within 10 ms). Thus, the proposed CA model provides a foundation for developing solution approaches for other problems (e.g., MAV repositioning) with more complex system operation constraints whose exact optimal solution can hardly be found with discrete modeling methods.
|
|
22. |
- Chen, Zhiwei, et al.
(författare)
-
Cross-Device Radio Frequency Fingerprinting Identification Based on Domain Adaptation
- 2024
-
Ingår i: IEEE transactions on consumer electronics. - : Institute of Electrical and Electronics Engineers (IEEE). - 0098-3063 .- 1558-4127. ; 70:1, s. 2391-2400
-
Tidskriftsartikel (refereegranskat)abstract
- Radio frequency fingerprinting (RFF) is a lightweight authentication technology for resource-limited terminal nodes by exploiting the unique hardware imperfections resulting from the manufacturing process. Previous studies about radio frequency fingerprinting identification (RFFI) mainly concentrate on improving the accuracy which is evaluated by the single receiver device that trains and identifies all the nodes. Due to the mobility of the consumer electronic terminals, these terminal nodes may need to be identified by the different receivers. In this paper, we propose a cross-device radio frequency fingerprinting identification scheme which allows enrolled nodes to be authenticated by different devices. Motivated by the observation that signals collected by different receiver devices have a distribution shift that would violate the basic independent and identically distributed (i.i.d) assumption of supervised learning. Domain adaptation is adopted to improve the accuracy under different receivers, which can align the data captured from different devices and eliminate the distribution shift through the labeled data from one receiver device and unlabeled data from the other device. By this way, the distribution shift from different devices is corrected. Extensive experiment configurations under various Signal-to-noise ratio (SNR) are carried out to demonstrate the performance of domain adaptation with the same model structure. The results indicate that classification accuracy under different devices can be increased by 7%-15% and get a stable accuracy rate higher than 90% by leveraging our proposed cross-device RFFI scheme.
|
|
23. |
- Huang, Ketuan, et al.
(författare)
-
Genetic variants and Expression of Cytochrome p450 Oxidoreductase Predict Postoperative Survival in Patients with Hepatitis B Virus-Related Hepatocellular Carcinoma
- 2019
-
Ingår i: Journal of Cancer. - : IVYSPRING INT PUBL. - 1837-9664. ; 10:6, s. 1453-1465
-
Tidskriftsartikel (refereegranskat)abstract
- Our current study investigates the prognostic values of genetic variants and mRNA expression of cytochrome p450 oxidoreductase (POR) in hepatitis B virus (HBV)-related hepatocellular carcinoma (HCC). A total of 19 candidate single nucleotide polymorphisms (SNPs) located in the exons of POR were genotyped using Sanger sequencing from 476 HBV-related HCC patients who underwent hepatectomy between 2003 and 2013. The mRNA expression of POR in 212 patients with HBV-related HCC was obtained from GSE14520 dataset. Survival analysis was performed to investigate the association of POR variants and mRNA expression with overall survival (OS) and recurrence-free survival (RFS). Nomograms were used to predict the prognosis of HBV-related HCC patients. Gene set enrichment analysis (GSEA) was used to investigate the mechanism of POR in HBV-related HCC prognosis. The polymorphism POR-rs1057868 was significantly associated with HBV-related HCC OS (CT/TT vs. CC, hazard ratio [HR] = 0.69, 95% confidence interval [CI] = [0.54, 0.88], P = 0.003), but not significantly associated with RFS (CT/TT vs. CC, P = 0.378). POR mRNA expression was also significantly associated with HBV-related HCC OS (high vs. low, HR = 0.61, 95% CI = [0.38, 0.97], P= 0.036), but not significantly associated with the RFS (high vs. low, P = 0.201). Two nomograms were developed to predict the HBV-related HCC OS. Furthermore, GSEA suggests that multiple gene sets were significantly enriched in liver cancer survival and recurrence, as well as POR-related target therapy in the liver. In conclusion, our study suggests that POR-rs1057868 and mRNA expression may serve as a potential postoperative prognosis biomarker in HBV-related HCC.
|
|
24. |
- Ju, Ying, et al.
(författare)
-
Joint Secure Offloading and Resource Allocation for Vehicular Edge Computing Network : A Multi-Agent Deep Reinforcement Learning Approach
- 2023
-
Ingår i: IEEE transactions on intelligent transportation systems (Print). - : Institute of Electrical and Electronics Engineers (IEEE). - 1524-9050 .- 1558-0016. ; 24:5, s. 5555-5569
-
Tidskriftsartikel (refereegranskat)abstract
- The mobile edge computing (MEC) technology can simultaneously provide high-speed computing services for multiple vehicular users (VUs) in vehicular edge computing (VEC) networks. Nevertheless, due to the open feature of the wireless offloading channels and the high mobility of the vehicles, the security and stability of the offloading process would be seriously degraded. In this paper, by utilizing the physical layer security (PLS) technique and spectrum sharing architecture, we propose a deep reinforcement learning based joint secure offloading and resource allocation (SORA) scheme to improve the secrecy performance and resource efficiency of the multi-user VEC networks, where the VU offloading links share the frequency spectrum preoccupied with the vehicle-to-vehicle (V2V) communication links. We use Wyner's wiretap coding scheme to obtain the achievable secrecy rate and guarantee that confidential information cannot be decoded by multiple mobile eavesdroppers. We aim at minimizing the system processing delay while securing the wireless offloading process, by jointly optimizing the transmit power, the frequency spectrum selection and the computation resource allocation. We formulate the optimization problem as a multi-agent collaborative optimal decision problem and solve it with a double deep Q-learning algorithm. Besides, we set a punishment mechanism for the rate degradation to guarantee the communication quality of each V2V link. Simulation results demonstrate that multiple VU agents adopting the SORA scheme can rapidly adapt to the highly dynamic VEC networks and cooperate to improve the system delay performance while increasing the secrecy probability.
|
|
25. |
- Lai, Dayi, et al.
(författare)
-
A comprehensive review of thermal comfort studies in urban open spaces
- 2020
-
Ingår i: Science of the Total Environment. - : Elsevier BV. - 0048-9697 .- 1879-1026. ; 742
-
Forskningsöversikt (refereegranskat)abstract
- Urban open spaces provide various benefits to large populations in cities. Since thermally comfortable urban open spaces improve the quality of urban living, an increasing number of studies have been conducted to extend the existing knowledge of outdoor thermal comfort. This paper comprehensively reviews current outdoor thermal comfort studies, including benchmarks, data collection methods, and models of outdoor thermal comfort. Because outdoor thermal comfort is a complex issue influenced by various factors, a conceptual framework is proposed which includes physical, physiological and psychological factors as direct influences: and behavioral, personal, social, cultural factors, as well as thermal history, site, and alliesthesia, as indirect influences. These direct and indirect factors are further decomposed and reviewed, and the interactions among various factors are discussed. This review provides researchers with a systematic and comprehensive understanding of outdoor thermal comfort, and can also guide designers and planners in creating thermally comfortable urban open spaces.
|
|
26. |
|
|
27. |
- Liu, Zhiwei, et al.
(författare)
-
Patterns of Human Leukocyte Antigen Class I and Class II Associations and Cancer
- 2021
-
Ingår i: Cancer Research. - : American Association For Cancer Research (AACR). - 0008-5472 .- 1538-7445. ; 81:4, s. 1148-1152
-
Tidskriftsartikel (refereegranskat)abstract
- Human leukocyte antigen (HLA) gene variation is associated with risk of cancers, particularly those with infectious etiology or hematopoietic origin, given its role in immune presentation. Previous studies focused primarily on HLA allele/haplotype-specific associations. To answer whether associations are driven by HLA class I (essential for T-cell cytotoxicity) or class II (important for T-cell helper responses) genes, we analyzed GWAS from 24 case–control studies and consortia comprising 27 cancers (totaling >71,000 individuals). Associations for most cancers with infectious etiology or of hematopoietic origin were driven by multiple HLA regions, suggesting that both cytotoxic and helper T-cell responses are important. Notable exceptions were observed for nasopharyngeal carcinoma, an EBV-associated cancer, and CLL/SLL forms of non-Hodgkin lymphomas; these cancers were associated with HLA class I region only and HLA class II region only, implying the importance of cytotoxic T-cell responses for the former and CD4+ T-cell helper responses for the latter. Our findings suggest that increased understanding of the pattern of HLA associations for individual cancers could lead to better insights into specific mechanisms involved in cancer pathogenesis.Significance: GWAS of >71,000 individuals across 27 cancer types suggest that patterns of HLA Class I and Class II associations may provide etiologic insights for cancer.
|
|
28. |
- Peng, Zhiwei, et al.
(författare)
-
From ferronickel slag to value-added refractory materials : A microwave sintering strategy
- 2019
-
Ingår i: Resources, Conservation and Recycling. - : ELSEVIER. - 0921-3449 .- 1879-0658. ; 149, s. 521-531
-
Tidskriftsartikel (refereegranskat)abstract
- The present study proposes a novel strategy for preparation of refractory materials from potentially hazardous ferronickel slag by microwave sintering of the slag with addition of sintered magnesia in which a series of chemical reactions were involved. This strategy was developed based on examination of the phase transformations and microstructural changes of the slag during microwave sintering through X-ray diffraction (XRD) analysis and scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS) analysis, which determined the properties of refractory materials derived from the slag. It was shown that under microwave irradiation there existed rapid transformation of the olivine phase in the slag to high-melting point phases, including forsterite and spinels (e.g., magnesium iron chromate spinel, magnesium chromate spinel, and magnesium iron aluminate spinel). As a result, a high-quality refractory material with refractoriness of 1730 degrees C, bulk density of 2.80 g/cm(3), apparent porosity of 1.6%, and compressive strength of 206.62 MPa was obtained by microwave sintering of the slag at 1350 degrees C for only 20 min with addition of 25 wt % sintered magnesia. Because the microwave sintering strategy not only elevated the refractoriness by 70 degrees C, but also reduced the heating duration required by the conventional approach by 6 times, it demonstrated apparent technological superiority and wide application prospect in preparing superior-quality refractory materials from ferronickel slag and relevant industrial waste, which contributed to conservation of resources and energy as well as environmental protection.
|
|
29. |
- Qi, Tian, et al.
(författare)
-
Biomass steam gasification in bubbling fluidized bed for higher-H 2 syngas : CFD simulation with coarse grain model
- 2019
-
Ingår i: International Journal of Hydrogen Energy. - : Elsevier BV. - 0360-3199. ; 44:13, s. 6448-6460
-
Tidskriftsartikel (refereegranskat)abstract
- A comprehensive coarse grain model (CGM) is applied to simulation of biomass steam gasification in bubbling fluidized bed reactor. The CGM was evaluated by comparing the hydrodynamic behavior and heat transfer prediction with the results predicted using the discrete element method (DEM) and experimental data in a lab-scale fluidized bed furnace. CGM shows good performance and the computational time is significantly shorter than the DEM approach. The CGM is used to study the effects of different operating temperature and steam/biomass (S/B) ratio on the gasification process and product gas composition. The results show that higher temperature enhances the production of CO, and higher S/B ratio improves the production of H 2 , while it suppresses the production of CO. For the main product H 2 , the minimum relative error of CGM in comparison with experiment is 1%, the maximum relative error is less than 4%. For the total gas yield and H 2 gas yield, the maximum relative errors are less than 7%. The predicted concentration of different product gases is in good agreement with experimental data. CGM is shown to provide reliable prediction of the gasification process in fluidized bed furnace with considerably reduced computational time.
|
|
30. |
- Qie, Zhiwei, et al.
(författare)
-
Sensitive detection of atrazine in tap water using TELISA
- 2015
-
Ingår i: Analyst. - : Royal Society of Chemistry (RSC). - 1364-5528. ; 140:15, s. 5220-5226
-
Tidskriftsartikel (refereegranskat)abstract
- A highly sensitive flow injection analysis (FIA)-based thermal enzyme-linked immunoassay, TELISA, was developed for the rapid detection of atrazine (ATZ) in tap water. ATZ and beta-lactamase-labeled ATZ were employed in a competitive immunoassay using a monoclonal antibody (mAb). After the off-column liquid-phase competition, the mAb was captured on the Protein G Sepharose (TM) 4 Fast Flow (PGSFF) column support material. Injected beta-lactamase substrate ampicillin was degraded by the column-bound ATZ-beta-lactamase, generating a detectable heat signal. Several assay parameters were optimized, including substrate concentration, flow rates and regeneration conditions, as well as the mAb and ATZ-beta dilution ratios and concentrations. The assay linear range was 0.73-4.83 ng mL(-1) with a detection limit of 0.66 ng mL(-1). An entire heat signal requires 10 min for generation, and the cycle time is less than 40 min. The results were reproducible and stable. ATZ-spiked tap water samples exhibited a recovery rate of 103%-116%, which correlated with the UHPLC-MS/MS measurements. We attributed this significant increase in sensitivity over our previously published work to the following factors: (i) the capture of already-formed immune complexes on the column via immobilized Protein G, which eliminated chemical immobilization of the antibody; (ii) off-column preincubation allows the formation of immune complexes under nearly ideal conditions; and (iii) multiple buffers can be used to, in one case, enhance immune-complex formation and in the other to maximize enzymatic activity. Furthermore, the scheme creates a universal assay platform in which sensing is performed in the off-column incubation and detection after capture in the enzyme thermistor (ET) detector, which opens up the possibility of detecting any antigen for which antibodies were available.
|
|
31. |
- Sedghkerdar, Mohammad Hashem, et al.
(författare)
-
Core-shell structured CaO-based pellets protected by mesoporous ceramics shells for high-temperature CO2 capture
- 2016
-
Ingår i: Canadian Journal of Chemical Engineering. - : Wiley-Liss Inc.. - 0008-4034 .- 1939-019X. ; 94:11, s. 2038-2044
-
Tidskriftsartikel (refereegranskat)abstract
- In this study, a series of core-shell structured spheriform CO2 sorbents were synthesized by using CaO-based pellets as cores and different mesoporous metal oxides (e.g. alumina, ceria, and yttrium-stabilized zirconia) as shells through a repeated wet impregnation coating process. Cyclic CO2 capture performance of the obtained sorbents was investigated using a thermogravimetric analyzer. Among all the core/shell sorbents under study, the pellets coated with a layer of alumina exhibit the best performance in the retention of CO2 uptake over 20 cycles with the lowest activity loss of only 30.4 %, attributed to the existence of the thermal stable porous alumina shell which prevents the sintering and the aggregation of the CaO grains. Moreover, the attrition study using an air-jet apparatus and a standard test method reveals that such sorbents exhibit enhanced attrition resistance due to the protection of the porous shell providing them with a great potential for application in fluidized bed conditions.
|
|
32. |
- Yan, Beibei, et al.
(författare)
-
Structures and stabilization of low calorific value gas turbulent partially premixed flames in a conical burner
- 2010
-
Ingår i: Experimental Thermal and Fluid Science. - : Elsevier BV. - 1879-2286 .- 0894-1777. ; 34:3, s. 412-419
-
Konferensbidrag (refereegranskat)abstract
- Experiments are carried out on partially premixed turbulent flames stabilized in a conical burner. The investigated gaseous fuels are methane, methane diluted with nitrogen, and Mixtures of CH4, CO, CO2, H-2 and N-2, Simulating typical products from gasification of biomass, and co-firing of gasification gas with methane. The fuel and air are partially premixed in concentric tubes. Flame stabilization behavior is investigated and significantly different stabilization characteristics are observed in flames with and without the cone. Planar laser induced fluorescence (LIF) imaging of a fuel-tracer species, acetone, and OH radicals is carried out to characterize the flame structures. Large eddy simulations of the conical flames are carried out to gain further understanding of the flame/flow interaction in the cone. The data show that the flames with the cone are more stable than those without the cone. Without the cone (i.e. jet burner) the critical jet velocities for blowoff and liftoff of biomass derived gases are higher than that for methane/nitrogen mixture with the same heating values, indicating the enhanced flame stabilization by hydrogen in the mixture. With the cone the stability of flames is not sensitive to the compositions of the fuels, owing to the different flame stabilization mechanism in the conical flames than that in the jet flames. From the PLIF images it is shown that in the conical burner, the flame is stabilized by the cone at nearly the same position for different fuels. From large eddy simulations, the flames are shown to be controlled by the recirculation flows inside cone, which depends on the cone angle, but less sensitive to the fuel compositions and flow speed. The flames tend to be hold in the recirculation zones even at very high flow speed. Flame blowoff occurs when significant local extinction in the main body of the flame appears at high turbulence intensities. (C) 2009 Elsevier Inc. All rights reserved.
|
|
33. |
|
|
34. |
- Yang, Haiping, et al.
(författare)
-
Effects of potassium salts loading on calcium oxide on the hydrogen production from pyrolysis-gasification of biomass
- 2018
-
Ingår i: Bioresource Technology. - : Elsevier BV. - 0960-8524 .- 1873-2976. ; 249, s. 744-750
-
Tidskriftsartikel (refereegranskat)abstract
- The effects of potassium (K) salts loading on CaO on the H2 production from pyrolysis-gasification of wheat straw were investigated. The loading of 0.25 wt% KCl could significantly enhance the CO2 absorption capability of CaO. The CO2 concentration in the product gas decreased sharply from 20.83 to 11.70 vol%, and the H2 concentration increased from 48.2 to 55.5 vol%. While the loading of 0.25 wt% K2CO3/K2SO4 inhibited the enhancing effect of CaO. Further increasing the loading of KCl on CaO, the CO2 absorption of CaO declined, but the catalytic effect of KCl on the gasification process was promoted. The loading of 0.25 wt% KCl on CaO significantly improved the cyclic performance of CaO during the pyrolysis-gasification process. Higher H2 concentration and more CO2 absorbed by CaO were obtained with the loading of 0.25 wt% KCl even after 5 cycles compared with those of pure CaO in the first cycle.
|
|
35. |
- Ye, Zhiwei, et al.
(författare)
-
Quantitative Study of the Action on Rock Mass Failure under the Shock Wave and Gas Pressure in Bench Blasting
- 2023
-
Ingår i: International Journal of Geomechanics. - : American Society of Civil Engineers (ASCE). - 1532-3641 .- 1943-5622. ; 23:9
-
Tidskriftsartikel (refereegranskat)abstract
- The expansion and shock wave coexisting failure theory has been widely recognized. However, it is not clear whether the main cause of rock mass blasting failure is the shock wave or gas pressure. In this paper, the contribution proportions of both loads to rock mass failure were investigated in bench blasting. First, the blasting damage in rock mass was simulated with a fluid-structure interaction (FSI) method. Then, a novel method to quantitatively distinguish between the rock-breaking effects (RBEs) of the shock wave and gas pressure was proposed that was based on the damage results. In addition, under different free surface conditions, the blasting failure volume that was caused by both loads was obtained for three typical rock masses, which included poor, middle, and good rock masses. The results showed that the range of the tensile failure zone by reflected waves was small, and the favorable effects of free surfaces on the failure induced by shock waves were limited. The free surface had a minor beneficial influence on the rock mass failure that was induced by the shock waves. In addition, it had a more favorable influence on the failure that was induced by the gas pressure. Finally, the influence of the free surface and rock mass conditions on the contribution proportions of both loads was discussed. A higher proportion of the RBEs of the shock wave was in the good mass with large wave impedance compared with the poor rock mass with small wave impedance. According to the contribution proportions under different rock masses and free surface conditions, the main cause of rock blasting failure was the gas pressure action, which was verified through the field high-speed photography data. The findings revealed the main cause of rock mass failure in bench blasting and could provide a theoretical basis when seeking effective engineering measures to give full play to the gas pressure action.
|
|
36. |
- You, Qinglong, et al.
(författare)
-
Elevation dependent warming over the Tibetan Plateau: Patterns, mechanisms and perspectives
- 2020
-
Ingår i: Earth-Science Reviews. - : Elsevier BV. - 0012-8252. ; 210
-
Forskningsöversikt (refereegranskat)abstract
- © 2020 Elsevier B.V. The Tibetan Plateau (TP) is also known as the “Third Pole”. Elevation dependent warming (EDW), the phenomenon that warming rate changes systematically with elevation, is of high significance for realistically estimating warming rates and their impacts over the TP. This review summarizes studies of characteristics and mechanisms behind EDW over the TP based on multiple observed datasets and model simulations. Spatial expression of EDW and explanatory mechanisms are still largely unknown because of the lack of suitable data over the TP. The focus is on the roles played by known mechanisms such as snow/ice-albedo feedback, cloud feedback, atmospheric water vapor feedback, aerosol feedback, and changes in land use, ozone and vegetation. At present, there is limited consensus on the main mechanisms controlling EDW. Finally, new perspectives and unresolved issues are outlined, including quantification of EDW in climate model simulations, explanation of the long-term EDW reconstructed from proxies, interaction between the Asian summer monsoon and EDW, importance of EDW for future environmental changes and water resources, and current gaps in understanding EDW over extremely high elevations. Further progress requires a more comprehensive ground observation network, greater use of remote sensing data, and high-resolution climate modeling with better representation of both atmospheric and cryospheric processes.
|
|
37. |
- Zhang, Lixiu, et al.
(författare)
-
Advances in the Application of Perovskite Materials
- 2023
-
Ingår i: NANO-MICRO LETTERS. - : SHANGHAI JIAO TONG UNIV PRESS. - 2311-6706. ; 15:1
-
Forskningsöversikt (refereegranskat)abstract
- Nowadays, the soar of photovoltaic performance of perovskite solar cells has set off a fever in the study of metal halide perovskite materials. The excellent optoelectronic properties and defect tolerance feature allow metal halide perovskite to be employed in a wide variety of applications. This article provides a holistic review over the current progress and future prospects of metal halide perovskite materials in representative promising applications, including traditional optoelectronic devices (solar cells, light-emitting diodes, photodetectors, lasers), and cutting-edge technologies in terms of neuromorphic devices (artificial synapses and memristors) and pressure-induced emission. This review highlights the fundamentals, the current progress and the remaining challenges for each application, aiming to provide a comprehensive overview of the development status and a navigation of future research for metal halide perovskite materials and devices.
|
|
38. |
- Zhiwei, Zhu, 1985, et al.
(författare)
-
Multidimensional engineering of Saccharomyces cerevisiae for efficient synthesis of medium-chain fatty acids
- 2020
-
Ingår i: Nature Catalysis. - : Springer Science and Business Media LLC. - 2520-1158. ; 3:1, s. 64-74
-
Tidskriftsartikel (refereegranskat)abstract
- Medium-chain fatty acids (MCFAs; C6–C12) are valuable molecules used for biofuel and oleochemical production; however, it is challenging to synthesize these fatty acids efficiently using microbial biocatalysts due to the cellular toxicity of MCFAs. In this study, both the endogenous fatty acid synthase (FAS) and an orthogonal bacterial type I FAS were engineered for MCFA production in the yeast Saccharomyces cerevisiae. To improve cellular tolerance to toxic MCFAs, we performed directed evolution of the membrane transporter Tpo1 and strain adaptive laboratory evolution, which elevated the MCFA production by 1.3 ± 0.3- and 1.7 ± 0.2-fold, respectively. We therefore further engineered the highly resistant strain to augment the metabolic flux towards MCFAs. This multidimensional engineering of the yeast at the single protein/enzyme level, the pathway level and the cellular level, combined with an optimized cultivation process, resulted in the production of >1 g l−1 extracellular MCFAs—a more than 250-fold improvement over the original strain.
|
|