1. |
- Verra, L., et al.
(författare)
-
Controlled Growth of the Self-Modulation of a Relativistic Proton Bunch in Plasma
- 2022
-
Ingår i: Physical Review Accelerators and Beams. - : American Physical Society. - 2469-9888. ; 25:7
-
Tidskriftsartikel (refereegranskat)abstract
- A long, narrow, relativistic charged particle bunch propagating in plasma is subject to the self -modulation (SM) instability. We show that SM of a proton bunch can be seeded by the wakefields driven by a preceding electron bunch. SM timing reproducibility and control are at the level of a small fraction of the modulation period. With this seeding method, we independently control the amplitude of the seed wakefields with the charge of the electron bunch and the growth rate of SM with the charge of the proton bunch. Seeding leads to larger growth of the wakefields than in the instability case.
|
|
2. |
- Verra, L., et al.
(författare)
-
Development of the self-modulation instability of a relativistic proton bunch in plasma
- 2023
-
Ingår i: Physics of Plasmas. - : American Institute of Physics (AIP). - 1070-664X .- 1089-7674. ; 30:8
-
Tidskriftsartikel (refereegranskat)abstract
- Self-modulation is a beam-plasma instability that is useful to drive large-amplitude wakefields with bunches much longer than the plasma skin depth. We present experimental results showing that, when increasing the ratio between the initial transverse size of the bunch and the plasma skin depth, the instability occurs later along the bunch, or not at all, over a fixed plasma length because the amplitude of the initial wakefields decreases. We show cases for which self-modulation does not develop, and we introduce a simple model discussing the conditions for which it would not occur after any plasma length. Changing bunch size and plasma electron density also changes the growth rate of the instability. We discuss the impact of these results on the design of a particle accelerator based on the self-modulation instability seeded by a relativistic ionization front, such as the future upgrade of the Advanced WAKefield Experiment.
|
|
3. |
- Nechaeva, T., et al.
(författare)
-
Hosing of a Long Relativistic Particle Bunch in Plasma
- 2024
-
Ingår i: Physical Review Letters. - : American Physical Society. - 0031-9007 .- 1079-7114. ; 132:7
-
Tidskriftsartikel (refereegranskat)abstract
- Experimental results show that hosing of a long particle bunch in plasma can be induced by wakefields driven by a short, misaligned preceding bunch. Hosing develops in the plane of misalignment, selfmodulation in the perpendicular plane, at frequencies close to the plasma electron frequency, and are reproducible. Development of hosing depends on misalignment direction, its growth on misalignment extent and on proton bunch charge. Results have the main characteristics of a theoretical model, are relevant to other plasma -based accelerators and represent the first characterization of hosing.
|
|
4. |
- Verra, L., et al.
(författare)
-
Filamentation of a relativistic proton bunch in plasma
- 2024
-
Ingår i: Physical review. E. - : American Physical Society. - 2470-0045 .- 2470-0053. ; 109:5
-
Tidskriftsartikel (refereegranskat)abstract
- We show in experiments that a long, underdense, relativistic proton bunch propagating in plasma undergoes the oblique instability, which we observe as filamentation. We determine a threshold value for the ratio between the bunch transverse size and plasma skin depth for the instability to occur. At the threshold, the outcome of the experiment alternates between filamentation and self-modulation instability (evidenced by longitudinal modulation into microbunches). Time-resolved images of the bunch density distribution reveal that filamentation grows to an observable level late along the bunch, confirming the spatiotemporal nature of the instability. We provide a rough estimate of the amplitude of the magnetic field generated in the plasma by the instability and show that the associated magnetic energy increases with plasma density.
|
|
5. |
|
|
6. |
- Dabrowski, A. E., et al.
(författare)
-
Measuring the bunch frequency multiplication at the 3rd CLIC Test Facility
- 2012
-
Ingår i: Journal of Instrumentation. - 1748-0221. ; 7, s. P01005-
-
Tidskriftsartikel (refereegranskat)abstract
- The CLIC Test Facility 3 (CTF3) is being built and commissioned by an international collaboration to test the feasibility of the proposed Compact Linear Collider (CLIC) drive beam generation scheme. Central to this scheme is the use of RF deflectors to inject bunches into a delay loop and a combiner ring, in order to transform the initial bunch frequency of 1.5 GHz from the linac to a final bunch frequency of 12 GHz. To do so, the machine's transverse optics must be tuned to ensure beam isochronicity and each ring's length can finally be adjusted with wiggler magnets to a sub millimeter path length accuracy. Diagnostics based on optical streak camera and RF power measurements, in particular frequency bands, have been designed to measure the longitudinal behaviour of the beam during the combination. This paper presents the diagnostics and recent commissioning measurements.
|
|
7. |
|
|
8. |
|
|
9. |
|
|
10. |
- Olvegård, Maja, et al.
(författare)
-
High intensity profile monitor for time resolved spectrometry at the CLIC Test Facility 3
- 2012
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier BV. - 0168-9002 .- 1872-9576. ; 683, s. 29-39
-
Tidskriftsartikel (refereegranskat)abstract
- The power source of the Compact Linear Collider (CLIC) relies on the generation and deceleration of a high-intensity electron drive beam. In order to provide the best radio-frequency (RF) to beam-energy transfer efficiency, the electron beam is accelerated using fully loaded RF cavities, which leads to strong beam loading effects resulting in a high-energy transient. The stability of the RF power produced by the drive beam depends on the stability of the drive beam energy and energy spread along the pulse. The control and the monitoring of the time evolution of the beam energy distribution are therefore crucial for the accelerator performance. For this purpose segmented beam dumps, which are simple and robust devices, have been designed and installed at the CLIC Test Facility 3 (CTF3). These devices are located at the end of spectrometer lines and provide horizontal beam profiles with a time resolution better than 10 ns. The segmented dumps are composed of parallel, vertical, metallic plates, and are based on the same principle as a Faraday cup: the impinging beam current is read by a fast acquisition channel. Both FLUKA and Geant4 simulations were performed to define the optimum detector geometry for beam energies ranging from 5 MeV to 150 MeV. This paper presents a detailed description of the different steps of the design: the optimization of the detector spatial resolution, the minimization of the thermal load and the long-term damage resulting from high radiation doses. Four segmented dumps are currently used in the CTF3 complex. Their measured performance and limitations are presented in this paper. Typical beam spectra as measured in the CTF3 linac are also presented along with a description of the RF manipulations needed for tuning the beam energy spectrum.
|
|
11. |
- Pepitone, Kevin, Dr, 1988-, et al.
(författare)
-
Operation of a high-current drive beam electron gun prototype for the Compact Linear Collider
- 2020
-
Ingår i: Review of Scientific Instruments. - : AMER INST PHYSICS. - 0034-6748 .- 1089-7623. ; 91:9
-
Tidskriftsartikel (refereegranskat)abstract
- The high-average current electron gun low energy electrons from a thermionic cathode at high intensity is the prototype of the drive beam source for the Compact Linear Collider project. The electromagnetic design of the gun was done originally with 2D simulations to minimize the beam emittance for high-current operation (of the order of 8 A) at 140 keV. This paper reports on the first experimental measurements of beam extraction and transport. For the first time, 3D tracking simulations, which take into account precisely the cathode-grid geometry, have been compared with experimental optical transition radiation images of the beam, and we obtained impressive agreement. In addition, we have confirmed that the details of the cathode-grid assembly can impact significantly the beam emittance.
|
|