1. |
- Joffrin, E., et al.
(author)
-
Overview of the JET preparation for deuterium-tritium operation with the ITER like-wall
- 2019
-
In: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 59:11
-
Research review (peer-reviewed)abstract
- For the past several years, the JET scientific programme (Pamela et al 2007 Fusion Eng. Des. 82 590) has been engaged in a multi-campaign effort, including experiments in D, H and T, leading up to 2020 and the first experiments with 50%/50% D-T mixtures since 1997 and the first ever D-T plasmas with the ITER mix of plasma-facing component materials. For this purpose, a concerted physics and technology programme was launched with a view to prepare the D-T campaign (DTE2). This paper addresses the key elements developed by the JET programme directly contributing to the D-T preparation. This intense preparation includes the review of the physics basis for the D-T operational scenarios, including the fusion power predictions through first principle and integrated modelling, and the impact of isotopes in the operation and physics of D-T plasmas (thermal and particle transport, high confinement mode (H-mode) access, Be and W erosion, fuel recovery, etc). This effort also requires improving several aspects of plasma operation for DTE2, such as real time control schemes, heat load control, disruption avoidance and a mitigation system (including the installation of a new shattered pellet injector), novel ion cyclotron resonance heating schemes (such as the three-ions scheme), new diagnostics (neutron camera and spectrometer, active Alfven eigenmode antennas, neutral gauges, radiation hard imaging systems...) and the calibration of the JET neutron diagnostics at 14 MeV for accurate fusion power measurement. The active preparation of JET for the 2020 D-T campaign provides an incomparable source of information and a basis for the future D-T operation of ITER, and it is also foreseen that a large number of key physics issues will be addressed in support of burning plasmas.
|
|
2. |
- Labit, B., et al.
(author)
-
Dependence on plasma shape and plasma fueling for small edge-localized mode regimes in TCV and ASDEX Upgrade
- 2019
-
In: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 59:8
-
Journal article (peer-reviewed)abstract
- © 2019 Institute of Physics Publishing. All rights reserved. Within the EUROfusion MST1 work package, a series of experiments has been conducted on AUG and TCV devices to disentangle the role of plasma fueling and plasma shape for the onset of small ELM regimes. On both devices, small ELM regimes with high confinement are achieved if and only if two conditions are fulfilled at the same time. Firstly, the plasma density at the separatrix must be large enough (ne,sep/nG ∼ 0.3), leading to a pressure profile flattening at the separatrix, which stabilizes type-I ELMs. Secondly, the magnetic configuration has to be close to a double null (DN), leading to a reduction of the magnetic shear in the extreme vicinity of the separatrix. As a consequence, its stabilizing effect on ballooning modes is weakened.
|
|
3. |
- Meyer, H.F., et al.
(author)
-
Overview of physics studies on ASDEX Upgrade
- 2019
-
In: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 59:11
-
Research review (peer-reviewed)abstract
- The ASDEX Upgrade (AUG) programme, jointly run with the EUROfusion MST1 task force, continues to significantly enhance the physics base of ITER and DEMO. Here, the full tungsten wall is a key asset for extrapolating to future devices. The high overall heating power, flexible heating mix and comprehensive diagnostic set allows studies ranging from mimicking the scrape-off-layer and divertor conditions of ITER and DEMO at high density to fully non-inductive operation (q 95 = 5.5, ) at low density. Higher installed electron cyclotron resonance heating power 6 MW, new diagnostics and improved analysis techniques have further enhanced the capabilities of AUG. Stable high-density H-modes with MW m-1 with fully detached strike-points have been demonstrated. The ballooning instability close to the separatrix has been identified as a potential cause leading to the H-mode density limit and is also found to play an important role for the access to small edge-localized modes (ELMs). Density limit disruptions have been successfully avoided using a path-oriented approach to disruption handling and progress has been made in understanding the dissipation and avoidance of runaway electron beams. ELM suppression with resonant magnetic perturbations is now routinely achieved reaching transiently . This gives new insight into the field penetration physics, in particular with respect to plasma flows. Modelling agrees well with plasma response measurements and a helically localised ballooning structure observed prior to the ELM is evidence for the changed edge stability due to the magnetic perturbations. The impact of 3D perturbations on heat load patterns and fast-ion losses have been further elaborated. Progress has also been made in understanding the ELM cycle itself. Here, new fast measurements of and E r allow for inter ELM transport analysis confirming that E r is dominated by the diamagnetic term even for fast timescales. New analysis techniques allow detailed comparison of the ELM crash and are in good agreement with nonlinear MHD modelling. The observation of accelerated ions during the ELM crash can be seen as evidence for the reconnection during the ELM. As type-I ELMs (even mitigated) are likely not a viable operational regime in DEMO studies of 'natural' no ELM regimes have been extended. Stable I-modes up to have been characterised using -feedback. Core physics has been advanced by more detailed characterisation of the turbulence with new measurements such as the eddy tilt angle - measured for the first time - or the cross-phase angle of and fluctuations. These new data put strong constraints on gyro-kinetic turbulence modelling. In addition, carefully executed studies in different main species (H, D and He) and with different heating mixes highlight the importance of the collisional energy exchange for interpreting energy confinement. A new regime with a hollow profile now gives access to regimes mimicking aspects of burning plasma conditions and lead to nonlinear interactions of energetic particle modes despite the sub-Alfvénic beam energy. This will help to validate the fast-ion codes for predicting ITER and DEMO.
|
|
4. |
|
|
5. |
- Blanken, T. C., et al.
(author)
-
Real-time plasma state monitoring and supervisory control on TCV
- 2019
-
In: Nuclear Fusion. - : Institute of Physics (IOP). - 0029-5515 .- 1741-4326. ; 59:2
-
Journal article (peer-reviewed)abstract
- In ITER and DEMO, various control objectives related to plasma control must be simultaneously achieved by the plasma control system (PCS), in both normal operation as well as off-normal conditions. The PCS must act on off-normal events and deviations from the target scenario, since certain sequences (chains) of events can precede disruptions. It is important that these decisions are made while maintaining a coherent prioritization between the real-time control tasks to ensure high-performance operation. In this paper, a generic architecture for task-based integrated plasma control is proposed. The architecture is characterized by the separation of state estimation, event detection, decisions and task execution among different algorithms, with standardized signal interfaces. Central to the architecture are a plasma state monitor and supervisory controller. In the plasma state monitor, discrete events in the continuous-valued plasma state arc modeled using finite state machines. This provides a high-level representation of the plasma state. The supervisory controller coordinates the execution of multiple plasma control tasks by assigning task priorities, based on the finite states of the plasma and the pulse schedule. These algorithms were implemented on the TCV digital control system and integrated with actuator resource management and existing state estimation algorithms and controllers. The plasma state monitor on TCV can track a multitude of plasma events, related to plasma current, rotating and locked neoclassical tearing modes, and position displacements. In TCV experiments on simultaneous control of plasma pressure, safety factor profile and NTMs using electron cyclotron heating (ECI I) and current drive (ECCD), the supervisory controller assigns priorities to the relevant control tasks. The tasks are then executed by feedback controllers and actuator allocation management. This work forms a significant step forward in the ongoing integration of control capabilities in experiments on TCV, in support of tokamak reactor operation.
|
|
6. |
|
|
7. |
- Hegde, Pratibha Raghupati, et al.
(author)
-
Beyond the Buzz : Strategic Paths for Enabling Useful NISQ Applications
- 2024
-
In: Proceedings of the 21st ACM International Conference on Computing Frontiers, CF 2024. - : Association for Computing Machinery (ACM). ; , s. 310-313
-
Conference paper (peer-reviewed)abstract
- There is much debate on whether quantum computing on current NISQ devices, consisting of noisy hundred qubits and requiring a non-negligible usage of classical computing as part of the algorithms, has utility and will ever offer advantages for scientific and industrial applications with respect to traditional computing. In this position paper, we argue that while real-world NISQ quantum applications have yet to surpass their classical counterparts, strategic approaches can be used to facilitate advancements in both industrial and scientific applications. We have identified three key strategies to guide NISQ computing towards practical and useful implementations. Firstly, prioritizing the identification of a "killer app"is a key point. An application demonstrating the distinctive capabilities of NISQ devices can catalyze broader development. We suggest focusing on applications that are inherently quantum, e.g., pointing towards quantum chemistry and material science as promising domains. These fields hold the potential to exhibit benefits, setting benchmarks for other applications to follow. Secondly, integrating AI and deep-learning methods into NISQ computing is a promising approach. Examples such as quantum Physics-Informed Neural Networks and Differentiable Quantum Circuits (DQC) demonstrate the synergy between quantum computing and AI. Lastly, recognizing the interdisciplinary nature of NISQ computing, we advocate for a co-design approach. Achieving synergy between classical and quantum computing necessitates an effort in co-designing quantum applications, algorithms, and programming environments, and the integration of HPC with quantum hardware. The interoperability of these components is crucial for enabling the full potential of NISQ computing. In conclusion, through the usage of these three approaches, we argue that NISQ computing can surpass current limitations and evolve into a valuable tool for scientific and industrial applications. This requires an approach that integrates domain-specific killer apps, harnesses the power of quantum-enhanced AI, and embraces a collaborative co-design methodology.
|
|
8. |
|
|
9. |
- Meyer, H., et al.
(author)
-
Overview of progress in European medium sized tokamaks towards an integrated plasma-edge/wall solution
- 2017
-
In: Nuclear Fusion. - : Institute of Physics Publishing (IOPP). - 0029-5515 .- 1741-4326. ; 57:10
-
Journal article (peer-reviewed)abstract
- Integrating the plasma core performance with an edge and scrape-off layer (SOL) that leads to tolerable heat and particle loads on the wall is a major challenge. The new European medium size tokamak task force (EU-MST) coordinates research on ASDEX Upgrade (AUG), MAST and TCV. This multi-machine approach within EU-MST, covering a wide parameter range, is instrumental to progress in the field, as ITER and DEMO core/pedestal and SOL parameters are not achievable simultaneously in present day devices. A two prong approach is adopted. On the one hand, scenarios with tolerable transient heat and particle loads, including active edge localised mode (ELM) control are developed. On the other hand, divertor solutions including advanced magnetic configurations are studied. Considerable progress has been made on both approaches, in particular in the fields of: ELM control with resonant magnetic perturbations (RMP), small ELM regimes, detachment onset and control, as well as filamentary scrape-off-layer transport. For example full ELM suppression has now been achieved on AUG at low collisionality with n = 2 RMP maintaining good confinement H-H(98,H-y2) approximate to 0.95. Advances have been made with respect to detachment onset and control. Studies in advanced divertor configurations (Snowflake, Super-X and X-point target divertor) shed new light on SOL physics. Cross field filamentary transport has been characterised in a wide parameter regime on AUG, MAST and TCV progressing the theoretical and experimental understanding crucial for predicting first wall loads in ITER and DEMO. Conditions in the SOL also play a crucial role for ELM stability and access to small ELM regimes.
|
|
10. |
|
|
11. |
|
|
12. |
|
|
13. |
- Tierens, W., et al.
(author)
-
Validation of the ICRF antenna coupling code RAPLICASOL against TOPICA and experiments
- 2019
-
In: Nuclear Fusion. - : IOP PUBLISHING LTD. - 0029-5515 .- 1741-4326. ; 59:4
-
Journal article (peer-reviewed)abstract
- In this paper we validate the finite element code RAPLICASOL, which models radiofrequency wave propagation in edge plasmas near ICRF antennas, against calculations with the TOPICA code. We compare the output of both codes for the ASDEX Upgrade 2-strap antenna, and for a 4-strap WEST-like antenna. Although RAPLICASOL requires considerably fewer computational resources than TOPICA, we find that the predicted quantities of experimental interest (including reflection coefficients, coupling resistances, S- and Z-matrix entries, optimal matching settings, and even radiofrequency electric fields) are in good agreement provided we are careful to use the same geometry in both codes.
|
|
14. |
- Trier, E., et al.
(author)
-
ELM-induced cold pulse propagation in ASDEX Upgrade
- 2019
-
In: Plasma Physics and Controlled Fusion. - : IOP PUBLISHING LTD. - 0741-3335 .- 1361-6587. ; 61:4
-
Journal article (peer-reviewed)abstract
- In ASDEX Upgrade, the propagation of cold pulses induced by type-I edge localized modes (ELMs) is studied using electron cyclotron emission measurements, in a dataset of plasmas with moderate triangularity. It is found that the edge safety factor or the plasma current are the main determining parameters for the inward penetration of the T-e perturbations. With increasing plasma current the ELM penetration is more shallow in spite of the stronger ELMs. Estimates of the heat pulse diffusivity show that the corresponding transport is too large to be representative of the inter-ELM phase. Ergodization of the plasma edge during ELMs is a possible explanation for the observed properties of the cold pulse propagation, which is qualitatively consistent with non-linear magneto-hydro-dynamic simulations.
|
|
15. |
|
|
16. |
- Beckers, J., et al.
(author)
-
Physics and applications of dusty plasmas : The Perspectives 2023
- 2023
-
In: Physics of Plasmas. - : AIP Publishing. - 1070-664X .- 1089-7674. ; 30:12
-
Journal article (peer-reviewed)abstract
- Dusty plasmas are electrically quasi-neutral media that, along with electrons, ions, neutral gas, radiation, and electric and/or magnetic fields, also contain solid or liquid particles with sizes ranging from a few nanometers to a few micrometers. These media can be found in many natural environments as well as in various laboratory setups and industrial applications. As a separate branch of plasma physics, the field of dusty plasma physics was born in the beginning of 1990s at the intersection of the interests of the communities investigating astrophysical and technological plasmas. An additional boost to the development of the field was given by the discovery of plasma crystals leading to a series of microgravity experiments of which the purpose was to investigate generic phenomena in condensed matter physics using strongly coupled complex (dusty) plasmas as model systems. Finally, the field has gained an increasing amount of attention due to its inevitable connection to the development of novel applications ranging from the synthesis of functional nanoparticles to nuclear fusion and from particle sensing and diagnostics to nano-contamination control. The purpose of the present perspectives paper is to identify promising new developments and research directions for the field. As such, dusty plasmas are considered in their entire variety: from classical low-pressure noble-gas dusty discharges to atmospheric pressure plasmas with aerosols and from rarefied astrophysical plasmas to dense plasmas in nuclear fusion devices. Both fundamental and application aspects are covered.
|
|
17. |
- Behling, Rolf, et al.
(author)
-
Microparticle Hybrid Target Simulation for keV X-ray Sources
- 2024
-
In: Instruments. - : Multidisciplinary Digital Publishing Institute (MDPI). - 2410-390X. ; 8:2
-
Journal article (peer-reviewed)abstract
- The spatiotemporal resolution of diagnostic X-ray images obtained with rotating-anode X-ray tubes has remained limited as the development of rigid, high-performance target materials has slowed down. However, novel imaging techniques using finer detector pixels and orthovolt cancer therapy employing narrow X-ray focal spots demand improved output from brilliant keV X-ray sources. Since its advent in 1929, rotating-anode technology has become the greatest bottleneck to improvement. To overcome this limitation, the current authors have devised a novel X-ray generation technology based on tungsten microparticle targets. The current study investigated a hybrid solution of a stream of fast tungsten microparticles and a rotating anode to both harvest the benefits of the improved performance of the new solution and to reuse known technology. The rotating anode captures energy that may pass a partially opaque microparticle stream and thereby contributes to X-ray generation. With reference to fast-rotating anodes and a highly appreciated small focal spot of a standardized size of 0.3 for an 8° target angle (physical: 0.45 mm × 4.67 mm), we calculated a potential output gain of at least 85% for non-melting microparticles and of 124% if melting is envisioned. Microparticle charging can be remediated by electron backscattering and electron field emission. The adoption of such a solution enables substantially improved image resolution.
|
|
18. |
- Budny, R. V., et al.
(author)
-
Alpha heating, isotopic mass, and fast ion effects in deuterium-tritium experiments
- 2018
-
In: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 58:9
-
Journal article (peer-reviewed)abstract
- Alpha heating experiments in the Tokamak Fusion Test Reactor (TFTR) and in the Joint European Torus (JET) 1997 DTE1 campaign arc reexamined. In TFTR supershots central electron heating of both deuterium only and deuterium-tritium supershots was dominated by thermal ion-electron heat transfer rate p(ie). The higher T-e in deuterium-tritium supershots was mainly due to higher T-i largely caused by isotopic mass effects of neutral beam-thermal ion heating. The thermal ion-electron heating dominated the electron heating in the center. The ratio of the predicted alpha to total electron heating rates f(alp) is less than 0.30. Thus alpha heating (and possible favorable isotopic mass scaling of the thermal plasma) were too small to be measured reliably. The JET alpha heating Hot-Ion H-mode discharges had lower T-i/T-e, and thus had lower p(ie) and the deuterium-tritium DT discharges had higher f(alp), than in TFTR. There were not enough comparable discharges to verify alpha heating. The high performance phases consisted of rampup to brief flattop durations. At equal times during the rampup phase central T-e and T-i were linearly correlated with the thermal hydrogcnic isotopic mass < A >(hyd) which co-varied with beam ion pressure, the tritium fraction of neutral beam power, and the time delay to the first significant sawteeth which interrupted the T-e increases. For both devices the expected alpha healing rate and the null hypothesis of no alpha heating arc consistent with the measurements within the measurement and modeling uncertainties.
|
|
19. |
- Bykov, I., et al.
(author)
-
Modification of adhered dust on plasma-facing surfaces due to exposure to ELMy H-mode plasma in DIII-D
- 2017
-
In: NUCLEAR MATERIALS AND ENERGY. - : Elsevier BV. - 2352-1791. ; 12, s. 379-385
-
Journal article (peer-reviewed)abstract
- Transient heat load tests have been conducted in the lower divertor of DIII-D using DiMES manipulator in order to study the behavior of dust on tungsten Plasma Facing Components (PFCs) during ELMy H-mode discharges. Samples with pre- adhered, pre- characterized dust have been exposed at the outer strike point (OSP) in a series of discharges with varied intra-(inter-) ELM heat fluxes. We used C dust because of its high sublimation temperature and non-metal properties. Al dust as a surrogate for Be and W dust were employed as relevant to that in the ITER divertor. The poor initial thermal contact between the substrate and the particles led to overheating, sublimation and shrinking of the carbon dust, and wetting induced coagulation of Al dust. Little modification of the W dust was observed. An enhanced surface adhesion and improvement of the thermal contact of C and Al dust were the result of exposure. A post mortem "adhesive tape" sampling showed that 70% of Al, <5% of W and C particles could not be removed from the surface owing to the improved adhesion. Al and C but not W particles that could be lifted had W inclusions indicating damage to the substrate. This suggests that non destructive methods may be inefficient for removal of dust in ITER.
|
|
20. |
|
|
21. |
|
|
22. |
- Castello, Federico, et al.
(author)
-
Structure and thermodynamics of two dimensional Yukawa liquids
- 2021
-
In: Physical Review E. Statistical, Nonlinear, and Soft Matter Physics. - : American Physical Society (APS). - 1063-651X .- 1095-3787. ; 103:063205
-
Journal article (peer-reviewed)abstract
- The thermodynamic and structural properties of two dimensional dense Yukawa liquids are studied with molecular dynamics simulations. The "exact" thermodynamic properties are simultaneously employed in an advanced scheme for the determination of an equation of state that shows an unprecedented level of accuracy for the internal energy, pressure and isothermal compressibility. The "exact" structural properties are utilized to formulate a novel empirical correction to the hypernetted-chain approach that leads to a very high accuracy level in terms of static correlations and thermodynamics.
|
|
23. |
- Castello Lucco, Federico
(author)
-
Bridge functions in strongly coupled plasmas : theory, simulations and applications
- 2021
-
Doctoral thesis (other academic/artistic)abstract
- Strongly coupled or non-ideal plasmas are multi-component charged systems in which at least one species possesses an average interaction energy that is comparable or larger than its thermal energy. Non-ideal plasmas are naturally occurring in dense astrophysical objects (e.g. giant planet interiors) but also engineered in the laboratory (e.g. plasma discharges seeded with solid particulates). They are typically encountered in the liquid state, whose theoretical description is particularly challenging due to the lack of small parameters. This thesis is focused on the development of a novel theoretical approach for the accurate calculation of the structural and thermodynamic properties of plasma liquids. Apart from their inherent significance, these properties also constitute necessary input to advanced theories of dynamical correlations, collective excitations and transport coefficients. The theoretical approach is based on the integral equation theory framework, whose central quantity is the bridge function; an abstract object of diagrammatic analysis that is impossible to calculate or even approximate through virial-type expansions. Here the bridge function is accurately determined by combining elements of the isomorph theory of R-simple liquids with indirect extractions from computer simulations. The unprecedented level of accuracy in both the structural and thermodynamic properties and the very low computational cost, render the approach the most efficient alternative to computer simulations of classical and quantum plasma liquids. Applications to collective modes and metastable properties are also discussed.
|
|
24. |
- Causa, F., et al.
(author)
-
Analysis of runaway electron expulsion during tokamak instabilities detected by a single-channel Cherenkov probe in FTU
- 2019
-
In: Nuclear Fusion. - : IOP PUBLISHING LTD. - 0029-5515 .- 1741-4326. ; 59:4
-
Journal article (peer-reviewed)abstract
- The expulsion of runaway electrons (REs) during different types of tokamak instabilities is analysed by means of a Cherenkov probe inserted into the scrape-off layer of the FTU tokamak. One such type of instability, the well-known tearing mode, is involved in disruptive plasma termination events, during which the risk of RE avalanche multiplication is highest. The second type, known as anomalous Doppler instability, influences RE dynamics by enhancing pitch angle scattering. Three scenarios are analysed here, characterised by different RE generation rates and mechanisms. The main conclusions are drawn from correlations between the Cherenkov probe and other diagnostics. In particular, the Cherenkov probe permits the detection of fast electron expulsion with a high level of detail, presenting peaks with 100% signal contrast during tearing mode growth and rotation, and sub-peak structures reflecting the interplay between the magnetic island formed by the tearing mode, RE diffusion during island rotation and the geometry of obstacles in the vessel. Correlations between the Cherenkov signal, hard x-ray emission and electron cyclotron emission reveal the impulsive development of the anomalous Doppler instability with instability rise time in the microsecond scale resolved by the high time-resolution of the Cherenkov probe.
|
|
25. |
- Coburn, J., et al.
(author)
-
First wall energy deposition during vertical displacement events on ITER
- 2020
-
In: Physica Scripta. - : IOP Publishing. - 0031-8949 .- 1402-4896. ; T171:1
-
Journal article (peer-reviewed)abstract
- The beryllium (Be) first wall energy deposition and melt damage profiles resulting from the current quench phase of an unmitigated, 5 MA/1.8 T upward vertical displacement event for ITER are investigated. Time dependent 2D magnetic flux profiles are calculated with the DINA code and used as input for the SMITER 3D field line tracing software. 3D maps of the wetted area and perpendicular heat flux q(perpendicular to) show that the majority of the energy deposition occurs on the upper first wall panels #8 and #9 SMITER simulations predict q(perpendicular to,peak) approximate to 190 MW m(-2) on the surfaces of upper FWPs #8 and #9 at the end of the similar to 450 ms current quench. The surface heat flux maps generated by SMITER are used as input in the MEMOS-U code, which models Be melt formation and dynamics. Simulations reveal peak surface temperatures of similar to 2200 K, inward surface damage of similar to 0.5 mm in depth, and average melt velocities of similar to 2 m s(-1). Although VDEs are in principle the easiest disruptive instability to avoid, the analysis demonstrates that any non-mitigated events or intentional VDEs taking place during low I-p, early operational phases of ITER for the purposes of estimating disruption forces, must be kept to a low number.
|
|
26. |
- Coiling, Bethany, et al.
(author)
-
Testing of tritium breeder blanket activation foil spectrometer during JET operations
- 2018
-
In: Fusion engineering and design. - : Elsevier BV. - 0920-3796 .- 1873-7196. ; 136, s. 258-264
-
Journal article (peer-reviewed)abstract
- Accurate measurement of the nuclear environment within a test tritium breeding-blanket module of a fusion reactor is crucial to determine tritium production rates which are relevant to self-sufficiency of tritium fuel supply, tritium accountancy and also to the evaluation of localised power levels produced in blankets. This requires evaluation of the time-dependent spectral neutron flux within the test tritium breeding-blanket module under harsh radiation and temperature environments. The application of an activation foil-based spectrometer system to determine neutron flux density using a pneumatic transfer system in ITER has been studied, deployed and tested on the Joint European Torus (JET) machine in a recent deuterium - deuterium campaign for a selection of high purity activation foils. Deployment of the spectrometer system has provided important functional and practical testing of the detector measurement system, associated hardware and post processing techniques for the analysis of large data sets produced through the use of list mode data collection. The testing is invaluable for the optimisation of systems for future planned testing in tritium - tritium and deuterium - tritium conditions. Analysis of the time and energy spectra collected to date and the status of the development of methods for post processing are presented in this paper.
|
|
27. |
- Corre, Y., et al.
(author)
-
Sustained W-melting experiments on actively cooled ITER-like plasma facing unit in WEST
- 2021
-
In: Physica Scripta. - : IOP Publishing. - 0031-8949 .- 1402-4896. ; 96:12
-
Journal article (peer-reviewed)abstract
- The consequences of tungsten (W) melting on divertor lifetime and plasma operation are high priority issues for ITER. Sustained and controlled W-melting experiment has been achieved for the first time in WEST on a poloidal sharp leading edge of an actively cooled ITER-like plasma facing unit (PFU). A series of dedicated high power steady state plasma discharges were performed to reach the melting point of tungsten. The leading edge was exposed to a parallel heat flux of about 100 MW.m(-2) for up to 5 s providing a melt phase of about 2 s without noticeable impact of melting on plasma operation (radiated power and tungsten impurity content remained stable at constant input power) and no melt ejection were observed. The surface temperature of the MB was monitored by a high spatial resolution (0.1 mm/pixel) infrared camera viewing the melt zone from the top of the machine. The melting discharge was repeated three times resulting in about 6 s accumulated melting duration leading to material displacement from three similar pools. Cumulated on the overall sustained melting periods, this leads to excavation depth of about 230 mu m followed by a re-solidified tungsten bump of 200 mu m in the JxB direction.
|
|
28. |
- Corre, Y., et al.
(author)
-
Thermal analysis of protruding surfaces in the JET divertor
- 2017
-
In: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 57:6
-
Journal article (peer-reviewed)abstract
- Tungsten (W) melting is a major concern for next step fusion devices. Two ELM induced tungsten melting experiments have been performed in JET by introducing two special target plate lamellae designed to receive excessively high ELM transient power loads. The first experiment was performed in JET in 2013 using a special lamella with a sharp leading edge gradually varying from h = 0.25 mm to 2.5 mm in order to maximise the temperature rise by exposure to the full parallel heat flux. ELM-induced transient melting has been successively achieved allowing investigation of the melt motion. However, using the available IR viewing geometry from the top, it was not possible to directly discriminate between the top and leading edge power loads. To improve the experimental validation of heat load and melt motion modelling codes, a new protruding W lamella with a 15 degrees slope facing the toroidal direction has been installed for the 2015-16 campaigns, allowing direct, spatially resolved observation of the top surface and reduced sensitivity of the analysis to the surface incidence angle of the magnetic field. This paper reports on the results of these more recent experiments, with specific focus on IR data analysis and heat flux calculations during L-mode discharges in order to investigate the behaviour of the W lamella with steady state heat load, which is a prerequisite for the more complex ELMing H-mode discharges (including both, steady and transient heat loads). It shows that, at least in L-mode, the assumption of optical heat flux projection is justified.
|
|
29. |
- De Angeli, M., et al.
(author)
-
Cross machine investigation of magnetic tokamak dust : Morphological and elemental analysis
- 2021
-
In: Fusion engineering and design. - : Elsevier BV. - 0920-3796 .- 1873-7196. ; 166
-
Journal article (peer-reviewed)abstract
- The presence of magnetic dust can be an important issue for future fusion reactors where plasma breakdown is critical. Magnetic dust has been collected from contemporary fusion devices (FTU, Alcator C-Mod, COMPASS and DIII-D) that feature different plasma facing components. The results of morphological and elemental analysis are presented. Magnetic dust is based on steel or nickel alloys and its magnetism is generated by intense plasma material interactions. In spite of the strong similarities in terms of morphology and composition, X-ray diffraction analysis revealed differences in the structural evolution that leads to non-trivial magnetic responses.
|
|
30. |
- De Angeli, M., et al.
(author)
-
Cross machine investigation of magnetic tokamak dust; structural and magnetic analysis
- 2021
-
In: Nuclear Materials and Energy. - : Elsevier BV. - 2352-1791. ; 28
-
Journal article (peer-reviewed)abstract
- Magnetic dust collected from multiple fusion devices (FTU, Alcator C-Mod, COMPASS) that feature different plasma-facing components (PFCs) and toroidal magnetic fields has been analyzed by means of the X-ray diffraction technique aiming to investigate the nature and origin of dust magnetism. Analysis led to the conclusion that the main mechanism of ferromagnetic dust formation is the change of iron crystalline phase from austenitic to ferritic during the re-solidification of stainless steel droplets. Analysis also revealed differences in the collected dust structure and an unexpectedly high amount of stainless steel based dust in its native austenitic phase. Theoretical estimates showed that the magnetic moment force can also mobilize strongly paramagnetic adhered dust prior to the establishment of proper tokamak discharges. The post-mortem analysis of dust collected during pure magnetic discharges in FTU confirmed these estimates.
|
|
31. |
- De Angeli, M., et al.
(author)
-
Evidence for high-velocity solid dust generation induced by runaway electron impact in FTU
- 2023
-
In: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 63:1
-
Journal article (peer-reviewed)abstract
- Post-mortem and in situ evidence is presented in favor of the generation of high-velocity solid dust during the explosion-like interaction of runaway electrons with metallic plasma-facing components in FTU. The freshly-produced solid dust is the source of secondary de-localized wall damage through high-velocity impacts that lead to the formation of craters, which have been reproduced in dedicated light gas gun impact tests. This novel mechanism, of potential importance for ITER and DEMO, is further supported by surface analysis, multiple theoretical arguments and dust dynamics modeling.
|
|
32. |
- De Angeli, M., et al.
(author)
-
Post-mortem and in-situ investigations of magnetic dust in ASDEX Upgrade
- 2023
-
In: Nuclear Materials and Energy. - : Elsevier BV. - 2352-1791. ; 36
-
Journal article (peer-reviewed)abstract
- Pre-plasma mobilization of magnetic dust can be an important issue for future fusion reactors where plasma breakdown is critical. A combined on-line and off-line study of magnetic dust in ASDEX Upgrade is reported. Post-mortem collection revealed similar composition and morphology compared to other tokamaks, but the overall amount was much smaller. Optical and IR camera diagnostics excluded dust flybys prior to plasma start-up. The negative detection is discussed in light of the magnetic dust properties, the strength of mobilizing forces and the temporal evolution of the magnetic field.
|
|
33. |
- De Angeli, M., et al.
(author)
-
Pre-plasma remobilization of ferromagnetic dust in FTU and possible interference with tokamak operations
- 2019
-
In: Nuclear Fusion. - : IOP PUBLISHING LTD. - 0029-5515 .- 1741-4326. ; 59:10
-
Journal article (peer-reviewed)abstract
- Experimental evidence of the pre-plasma remobilization of ferromagnetic dust in FTU is presented. Thomson scattering data and IR camera observations document the occurrence of intrinsic dust remobilization prior to discharge start-up and allow for a rough calculation of the average mobilized dust density. Exposures of calibrated extrinsic non-magnetic and ferromagnetic dust to sole magnetic field discharges reveal that the magnetic moment force is the main mobilizing force, as confirmed by theoretical estimates. Pre-plasma remobilization probabilities are computed for varying dust sizes. The impact of prematurely remobilized dust on the breakdown and burn-through start-up phases is investigated together with the discharge termination induced once the plasma plateau is established.
|
|
34. |
- De Angeli, M., et al.
(author)
-
Remobilization of tungsten dust from castellated plasma-facing components
- 2017
-
In: NUCLEAR MATERIALS AND ENERGY. - : Elsevier BV. - 2352-1791. ; 12, s. 536-540
-
Journal article (peer-reviewed)abstract
- Studies of tungsten dust remobilization from castellated plasma-facing components can shed light to whether gaps constitute a dust accumulation site with important implications for monitoring but also removal. Castellated structures of ITER relevant geometry that contained pre-adhered tungsten dust of controlled deposition profile have been exposed in the Pilot-PSI linear device. The experiments were performed under steady state and transient plasma conditions, as well as varying magnetic field topologies. The results suggest that dust remobilization from the plasma-facing monoblock surface can enhance dust trapping in the gaps and that tungsten dust is efficiently trapped inside the gaps.
|
|
35. |
- Dornheim, Tobias, et al.
(author)
-
Ab initio density response and local field factor of warm dense hydrogen
- 2024
-
In: Matter and Radiation at Extremes. - : AIP Publishing. - 2468-2047 .- 2468-080X. ; 9:5
-
Journal article (peer-reviewed)abstract
- We present quasi-exact ab initio path integral Monte Carlo (PIMC) results for the partial static density responses and local field factors of hydrogen in the warm dense matter regime, from solid density conditions to the strongly compressed case. The full dynamic treatment of electrons and protons on the same footing allows us to rigorously quantify both electronic and ionic exchange-correlation effects in the system, and to compare the results with those of earlier incomplete models such as the archetypal uniform electron gas or electrons in a fixed ion snapshot potential that do not take into account the interplay between the two constituents. The full electronic density response is highly sensitive to electronic localization around the ions, and our results constitute unambiguous predictions for upcoming X-ray Thomson scattering experiments with hydrogen jets and fusion plasmas. All PIMC results are made freely available and can be used directly for a gamut of applications, including inertial confinement fusion calculations and the modeling of dense astrophysical objects. Moreover, they constitute invaluable benchmark data for approximate but computationally less demanding approaches such as density functional theory or PIMC within the fixed-node approximation.
|
|
36. |
- Dornheim, Tobias, et al.
(author)
-
Ab Initio Path Integral Monte Carlo Simulations of the Uniform Electron Gas on Large Length Scales
- 2024
-
In: The Journal of Physical Chemistry Letters. - : American Chemical Society (ACS). - 1948-7185. ; 15:5, s. 1305-1313
-
Journal article (peer-reviewed)abstract
- The accurate description of non-ideal quantum many-body systems is of prime importance for a host of applications within physics, quantum chemistry, materials science, and related disciplines. At finite temperatures, the gold standard is given by ab initio path integral Monte Carlo (PIMC) simulations, which do not require any empirical input but exhibit an exponential increase in the required computation time for Fermionic systems with an increase in system size N. Very recently, computing Fermionic properties without this bottleneck based on PIMC simulations of fictitious identical particles has been suggested. In our work, we use this technique to perform very large (N <= 1000) PIMC simulations of the warm dense electron gas and demonstrate that it is capable of providing a highly accurate description of the investigated properties, i.e., the static structure factor, the static density response function, and the local field correction, over the entire range of length scales.
|
|
37. |
- Dornheim, Tobias, et al.
(author)
-
Ab initio path integral Monte Carlo simulations of warm dense two-component systems without fixed nodes: Structural properties
- 2024
-
In: Journal of Chemical Physics. - : AIP Publishing. - 0021-9606 .- 1089-7690. ; 160:16
-
Journal article (peer-reviewed)abstract
- We present extensive new ab initio path integral Monte Carlo (PIMC) results for a variety of structural properties of warm dense hydrogen and beryllium. To deal with the fermion sign problem—an exponential computational bottleneck due to the antisymmetry of the electronic thermal density matrix—we employ the recently proposed [Y. Xiong and H. Xiong, J. Chem. Phys. 157, 094112 (2022); T. Dornheim et al., J. Chem. Phys. 159, 164113 (2023)] ξ-extrapolation method and find excellent agreement with the exact direct PIMC reference data where available. This opens up the intriguing possibility of studying a gamut of properties of light elements and potentially material mixtures over a substantial part of the warm dense matter regime, with direct relevance for astrophysics, material science, and inertial confinement fusion research.
|
|
38. |
- Dornheim, Tobias, et al.
(author)
-
Analytical representation of the local field correction of the uniform electron gas within the effective static approximation
- 2021
-
In: Physical Review B. - : American Physical Society (APS). - 2469-9950 .- 2469-9969. ; 103:16
-
Journal article (peer-reviewed)abstract
- The description of electronic exchange-correlation effects is of paramount importance for many applications in physics, chemistry, and beyond. In a recent paper, Dornheim et al. [Phys. Rev. Lett. 125, 235001 (2020)] have presented the effective static approximation (ESA) to the local field correction (LFC), which allows for the highly accurate estimation of electronic properties such as the interaction energy and the static structure factor. In this work, we give an analytical parametrization of the LFC within ESA that is valid for any wave number, and available for the entire range of densities (0.7 <= r(s) <= 20) and temperatures (0 <= theta <= 4) that are relevant for applications both in the ground state and in the warm dense matter regime. A short implementation in PYTHON is provided, which can easily be incorporated into existing codes. In addition, we present an extensive analysis of the performance of ESA regarding the estimation of various quantities like the dynamic structure factor, static dielectric function, the electronically screened ion potential, and also the stopping power in an electronic medium. In summary, we find that the ESA gives an excellent description of all these quantities in the warm dense matter regime, and only becomes inaccurate when the electrons start to form a strongly correlated electron liquid (r(s) similar to 20). Moreover, we note that the exact incorporation of exact asymptotic limits often leads to a superior accuracy compared to the neural-net representation of the static LFC [T. Dornheim et al., J. Chem. Phys. 151, 194104 (2019)].
|
|
39. |
- Dornheim, Tobias, et al.
(author)
-
Effective electronic forces and potentials from ab initio path integral Monte Carlo simulations
- 2022
-
In: Journal of Chemical Physics. - : AIP Publishing. - 0021-9606 .- 1089-7690. ; 156:24
-
Journal article (peer-reviewed)abstract
- The rigorous description of correlated quantum many-body systems constitutes one of the most challenging tasks in contemporary physics and related disciplines. In this context, a particularly useful tool is the concept of effective pair potentials that take into account the effects of the complex many-body medium consistently. In this work, we present extensive, highly accurate ab initio path integral Monte Carlo (PIMC) results for the effective interaction and the effective force between two electrons in the presence of the uniform electron gas. This gives us a direct insight into finite-size effects, thereby, opening up the possibility for novel domain decompositions and methodological advances. In addition, we present unassailable numerical proof for an effective attraction between two electrons under moderate coupling conditions, without the mediation of an underlying ionic structure. Finally, we compare our exact PIMC results to effective potentials from linear-response theory, and we demonstrate their usefulness for the description of the dynamic structure factor. All PIMC results are made freely available online and can be used as a thorough benchmark for new developments and approximations.
|
|
40. |
- Dornheim, Tobias, et al.
(author)
-
Electronic density response of warm dense matter
- 2023
-
In: Physics of Plasmas. - : AIP Publishing. - 1070-664X .- 1089-7674. ; 30:3, s. 032705-
-
Journal article (peer-reviewed)abstract
- Matter at extreme temperatures and pressures-commonly known as warm dense matter (WDM)-is ubiquitous throughout our Universe and occurs in astrophysical objects such as giant planet interiors and brown dwarfs. Moreover, WDM is very important for technological applications such as inertial confinement fusion and is realized in the laboratory using different techniques. A particularly important property for the understanding of WDM is given by its electronic density response to an external perturbation. Such response properties are probed in x-ray Thomson scattering (XRTS) experiments and are central for the theoretical description of WDM. In this work, we give an overview of a number of recent developments in this field. To this end, we summarize the relevant theoretical background, covering the regime of linear response theory and nonlinear effects, the fully dynamic response and its static, time-independent limit, and the connection between density response properties and imaginary-time correlation functions (ITCF). In addition, we introduce the most important numerical simulation techniques, including path-integral Monte Carlo simulations and different thermal density functional theory (DFT) approaches. From a practical perspective, we present a variety of simulation results for different density response properties, covering the archetypal model of the uniform electron gas and realistic WDM systems such as hydrogen. Moreover, we show how the concept of ITCFs can be used to infer the temperature from XRTS measurements of arbitrary complex systems without the need for any models or approximations. Finally, we outline a strategy for future developments based on the close interplay between simulations and experiments.
|
|
41. |
- Dornheim, Tobias, et al.
(author)
-
Energy response and spatial alignment of the perturbed electron gas
- 2023
-
In: Journal of Chemical Physics. - : AIP Publishing. - 0021-9606 .- 1089-7690. ; 158:16
-
Journal article (peer-reviewed)abstract
- We study the linear energy response of the uniform electron gas to an external harmonic perturbation with a focus on resolving different contributions to the total energy. This has been achieved by carrying out highly accurate ab initio path integral Monte Carlo (PIMC) calculations for a variety of densities and temperatures. We report a number of physical insights into effects such as screening and the relative importance of kinetic and potential energies for different wave numbers. A particularly interesting finding is obtained from the observed non-monotonic behavior of the induced change in the interaction energy, which becomes negative for intermediate wave numbers. This effect is strongly dependent on the coupling strength and constitutes further direct evidence for the spatial alignment of electrons introduced in earlier works [T. Dornheim et al., Commun. Phys. 5, 304 (2022)]. The observed quadratic dependence on the perturbation amplitude in the limit of weak perturbations and the quartic dependence of perturbation amplitude corrections are consistent with linear and nonlinear versions of the density stiffness theorem. All PIMC simulation results are freely available online and can be used to benchmark new methods or as input for other calculations.
|
|
42. |
- Dornheim, Tobias, et al.
(author)
-
Extraction of the frequency moments of spectral densities from imaginary-time correlation function data
- 2023
-
In: Physical Review B. - : American Physical Society (APS). - 2469-9950 .- 2469-9969. ; 107:15
-
Journal article (peer-reviewed)abstract
- We introduce an exact framework to compute the positive frequency moments M(alpha)(q) = (omega alpha) of different dynamic properties from imaginary-time quantum Monte Carlo data. As a practical example, we obtain the first five moments of the dynamic structure factor S(q, omega) of the uniform electron gas at the electronic Fermi temperature based on ab initio path integral Monte Carlo simulations. We find excellent agreement with known sum rules for alpha = 1, 3, and present results for alpha = 2, 4, 5. Our idea can be straightforwardly generalized to other dynamic properties such as the single-particle spectral function A(q, omega), and will be useful for a number of applications, including the study of ultracold atoms, exotic warm dense matter, and condensed matter systems.
|
|
43. |
- Dornheim, Tobias, et al.
(author)
-
Fermionic physics from ab initio path integral Monte Carlo simulations of fictitious identical particles
- 2023
-
In: Journal of Chemical Physics. - : AIP Publishing. - 0021-9606 .- 1089-7690. ; 159:16
-
Journal article (peer-reviewed)abstract
- The ab initio path integral Monte Carlo (PIMC) method is one of the most successful methods in statistical physics, quantum chemistry and related fields, but its application to quantum degenerate Fermi systems is severely hampered by an exponential computational bottleneck: the notorious fermion sign problem. Very recently, Xiong and Xiong [J. Chem. Phys. 157, 094112 (2022)] have suggested to partially circumvent the sign problem by carrying out simulations of fictitious systems guided by an interpolating continuous variable ξ ∈ [-1, 1], with the physical Fermi- and Bose-statistics corresponding to ξ = -1 and ξ = 1. It has been proposed that information about the fermionic limit might be obtained by calculations within the bosonic sector ξ > 0 combined with an extrapolation throughout the fermionic sector ξ < 0, essentially bypassing the sign problem. Here, we show how the inclusion of the artificial parameter ξ can be interpreted as an effective penalty on the formation of permutation cycles in the PIMC simulation. We demonstrate that the proposed extrapolation method breaks down for moderate to high quantum degeneracy. Instead, the method constitutes a valuable tool for the description of large Fermi-systems of weak quantum degeneracy. This is demonstrated for electrons in a 2D harmonic trap and for the uniform electron gas (UEG), where we find excellent agreement (∼0.5%) with exact configuration PIMC results in the high-density regime while attaining a speed-up exceeding 11 orders of magnitude. Finally, we extend the idea beyond the energy and analyze the radial density distribution (2D trap), as well as the static structure factor and imaginary-time density-density correlation function (UEG).
|
|
44. |
- Dornheim, Tobias, et al.
(author)
-
Physical insights from imaginary-time density-density correlation functions
- 2023
-
In: Matter and Radiation at Extremes. - : AIP Publishing. - 2468-2047 .- 2468-080X. ; 8:5
-
Journal article (peer-reviewed)abstract
- An accurate theoretical description of the dynamic properties of correlated quantum many-body systems, such as the dynamic structure factor S(q, ω), is important in many fields. Unfortunately, highly accurate quantum Monte Carlo methods are usually restricted to the imaginary time domain, and the analytic continuation of the imaginary-time density-density correlation function F(q, τ) to real frequencies is a notoriously hard problem. Here, it is argued that often no such analytic continuation is required because by definition, F(q, τ) contains the same physical information as does S(q, ω), only represented unfamiliarly. Specifically, it is shown how one can directly extract key information such as the temperature or quasi-particle excitation energies from the τ domain, which is highly relevant for equation-of-state measurements of matter under extreme conditions [T. Dornheim et al., Nat. Commun. 13, 7911 (2022)]. As a practical example, ab initio path-integral Monte Carlo results for the uniform electron gas (UEG) are considered, and it is shown that even nontrivial processes such as the roton feature of the UEG at low density [T. Dornheim et al., Commun. Phys. 5, 304 (2022)] are manifested straightforwardly in F(q, τ). A comprehensive overview is given of various useful properties of F(q, τ) and how it relates to the usual dynamic structure factor. In fact, working directly in the τ domain is advantageous for many reasons and opens up multiple avenues for future applications.
|
|
45. |
- Dornheim, Tobias, et al.
(author)
-
Spin-resolved density response of the warm dense electron gas
- 2022
-
In: Physical Review Research. - : American Physical Society (APS). - 2643-1564. ; 4:3
-
Journal article (peer-reviewed)abstract
- We present extensive ab initio path integral Monte Carlo (PIMC) results for the spin-resolved density response of the uniform electron gas at warm dense matter conditions. This allows us to unambiguously assess the accuracy of previous theoretical approximations, thereby providing valuable insights for the future development of dielectric schemes. From a physical perspective, we observe a nontrivial manifestation of an effective electron-electron attraction that emerges in the spin-offdiagonal static density response function at strong coupling, r(s) greater than or similar to 5. All PIMC results are freely available online and can be used to benchmark approximations and simulation schemes.
|
|
46. |
- Dornheim, T., et al.
(author)
-
X-ray Thomson scattering absolute intensity from the f-sum rule in the imaginary-time domain
- 2024
-
In: Scientific Reports. - : Springer Nature. - 2045-2322. ; 14:1
-
Journal article (peer-reviewed)abstract
- We present a formally exact and simulation-free approach for the normalization of X-ray Thomson scattering (XRTS) spectra based on the f-sum rule of the imaginary-time correlation function (ITCF). Our method works for any degree of collectivity, over a broad range of temperatures, and is applicable even in nonequilibrium situations. In addition to giving us model-free access to electronic correlations, this new approach opens up the intriguing possibility to extract a plethora of physical properties from the ITCF based on XRTS experiments.
|
|
47. |
- Drenik, A., et al.
(author)
-
Analysis of the outer divertor hot spot activity in the protection video camera recordings at JET
- 2019
-
In: Fusion engineering and design. - : ELSEVIER SCIENCE SA. - 0920-3796 .- 1873-7196. ; 139, s. 115-123
-
Journal article (peer-reviewed)abstract
- Hot spots on the divertor tiles at JET result in overestimation of the tile surface temperature which causes unnecessary termination of pulses. However, the appearance of hot spots can also indicate the condition of the divertor tile surfaces. To analyse the behaviour of the hot spots in the outer divertor tiles of JET, a simple image processing algorithm is developed. The algorithm isolates areas of bright pixels in the camera image and compares them to previously identified hot spots. The activity of the hot spots is then linked to values of other signals and parameters in the same time intervals. The operation of the detection algorithm was studied in a limited pulse range with high hot spot activity on the divertor tiles 5, 6 and 7. This allowed us to optimise the values of the controlling parameters. Then, the wider applicability of the method has been demonstrated by the analysis of the hot spot behaviour in a whole experimental campaign.
|
|
48. |
|
|
49. |
- Garzotti, L., et al.
(author)
-
Scenario development for D-T operation at JET
- 2019
-
In: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 59:7
-
Journal article (peer-reviewed)abstract
- The JET exploitation plan foresees D-T operations in 2020 (DTE2). With respect to the first D-T campaign in 1997 (DTE1), when JET was equipped with a carbon wall, the experiments will be conducted in presence of a beryllium-tungsten ITER-like wall and will benefit from an extended and improved set of diagnostics and higher additional heating power (32 MW neutral beam injection + 8 MW ion cyclotron resonance heating). There are several challenges presented by operations with the new wall: a general deterioration of the pedestal confinement; the risk of heavy impurity accumulation in the core, which, if not controlled, can cause the radiative collapse of the discharge; the requirement to protect the divertor from excessive heat loads, which may damage it permanently. Therefore, an intense activity of scenario development has been undertaken at JET during the last three years to overcome these difficulties and prepare the plasmas needed to demonstrate stationary high fusion performance and clear alpha particle effects. The paper describes the status and main achievements of this scenario development activity, both from an operational and plasma physics point of view.
|
|
50. |
- Goniche, M., et al.
(author)
-
Ion cyclotron resonance heating for tungsten control in various JET H-mode scenarios
- 2017
-
In: Plasma Physics and Controlled Fusion. - : IOP Publishing. - 0741-3335 .- 1361-6587. ; 59:5
-
Journal article (peer-reviewed)abstract
- Ion cyclotron resonance heating (ICRH) in the hydrogen minority scheme provides central ion heating and acts favorably on the core tungsten transport. Full wave modeling shows that, at medium power level (4MW), after collisional redistribution, the ratio of power transferred to the ions and the electrons vary little with the minority (hydrogen) concentration n(H)/n(e) but the high-Z impurity screening provided by the fast ions temperature increases with the concentration. The power radiated by tungsten in the core of the JET discharges has been analyzed on a large database covering the 2013-2014 campaign. In the baseline scenario with moderate plasma current (I-p. =. 2.5 MA) ICRH modifies efficiently tungsten transport to avoid its accumulation in the plasma centre and, when the ICRH power is increased, the tungsten radiation peaking evolves as predicted by the neo-classical theory. At higher current (3-4MA), tungsten accumulation can be only avoided with 5MW of ICRH power with high gas injection rate. For discharges in the hybrid scenario, the strong initial peaking of the density leads to strong tungsten accumulation. When this initial density peaking is slightly reduced, with an ICRH power in excess of 4 MW, very low tungsten concentration in the core (similar to 10(-5)) is maintained for 3 s. MHD activity plays a key role in tungsten transport and modulation of the tungsten radiation during a sawtooth cycle is correlated to the fishbone activity triggered by the fast ion pressure gradient.
|
|