1. |
- Menkveld, Albert J., et al.
(author)
-
Nonstandard Errors
- 2024
-
In: JOURNAL OF FINANCE. - : Wiley-Blackwell. - 0022-1082 .- 1540-6261. ; 79:3, s. 2339-2390
-
Journal article (peer-reviewed)abstract
- In statistics, samples are drawn from a population in a data-generating process (DGP). Standard errors measure the uncertainty in estimates of population parameters. In science, evidence is generated to test hypotheses in an evidence-generating process (EGP). We claim that EGP variation across researchers adds uncertainty-nonstandard errors (NSEs). We study NSEs by letting 164 teams test the same hypotheses on the same data. NSEs turn out to be sizable, but smaller for more reproducible or higher rated research. Adding peer-review stages reduces NSEs. We further find that this type of uncertainty is underestimated by participants.
|
|
2. |
- Joosten, Robbie P., et al.
(author)
-
PDB_REDO : automated re-refinement of X-ray structure models in the PDB
- 2009
-
In: Journal of applied crystallography. - 0021-8898 .- 1600-5767. ; 42, s. 376-384
-
Journal article (peer-reviewed)abstract
- Structural biology, homology modelling and rational drug design require accurate three-dimensional macromolecular coordinates. However, the coordinates in the Protein Data Bank (PDB) have not all been obtained using the latest experimental and computational methods. In this study a method is presented for automated re-refinement of existing structure models in the PDB. A large-scale benchmark with 16 807 PDB entries showed that they can be improved in terms of fit to the deposited experimental X-ray data as well as in terms of geometric quality. The re-refinement protocol uses TLS models to describe concerted atom movement. The resulting structure models are made available through the PDB_REDO databank (http://www.cmbi.ru.nl/pdb_redo/). Grid computing techniques were used to overcome the computational requirements of this endeavour.
|
|
3. |
- Beal, Jacob, et al.
(author)
-
Robust estimation of bacterial cell count from optical density
- 2020
-
In: Communications Biology. - : Springer Science and Business Media LLC. - 2399-3642. ; 3:1
-
Journal article (peer-reviewed)abstract
- Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data.
|
|
4. |
- Duchemin, Wandrille, et al.
(author)
-
RecPhyloXML : a format for reconciled gene trees
- 2018
-
In: Bioinformatics. - : Oxford University Press (OUP). - 1367-4803 .- 1367-4811. ; 34:21, s. 3646-3652
-
Journal article (peer-reviewed)abstract
- Motivation: A reconciliation is an annotation of the nodes of a gene tree with evolutionary events-for example, speciation, gene duplication, transfer, loss, etc. -along with a mapping onto a species tree. Many algorithms and software produce or use reconciliations but often using different reconciliation formats, regarding the type of events considered or whether the species tree is dated or not. This complicates the comparison and communication between different programs. Results: Here, we gather a consortium of software developers in gene tree species tree reconciliation to propose and endorse a format that aims to promote an integrative-albeit flexible-specification of phylogenetic reconciliations. This format, named recPhyloXML, is accompanied by several tools such as a reconciled tree visualizer and conversion utilities.
|
|
5. |
- Escott-Price, Valentina, et al.
(author)
-
Gene-Wide Analysis Detects Two New Susceptibility Genes for Alzheimer's Disease
- 2014
-
In: PLOS ONE. - : Public Library of Science (PLoS). - 1932-6203. ; 9:6, s. e94661-
-
Journal article (peer-reviewed)abstract
- Background: Alzheimer's disease is a common debilitating dementia with known heritability, for which 20 late onset susceptibility loci have been identified, but more remain to be discovered. This study sought to identify new susceptibility genes, using an alternative gene-wide analytical approach which tests for patterns of association within genes, in the powerful genome-wide association dataset of the International Genomics of Alzheimer's Project Consortium, comprising over 7 m genotypes from 25,580 Alzheimer's cases and 48,466 controls. Principal Findings: In addition to earlier reported genes, we detected genome-wide significant loci on chromosomes 8 (TP53INP1, p = 1.4x10(-6)) and 14 (IGHV1-67 p = 7.9x10(-8)) which indexed novel susceptibility loci. Significance: The additional genes identified in this study, have an array of functions previously implicated in Alzheimer's disease, including aspects of energy metabolism, protein degradation and the immune system and add further weight to these pathways as potential therapeutic targets in Alzheimer's disease.
|
|
6. |
- Isnard, Christophe, et al.
(author)
-
Unexpected Cell Wall Alteration-Mediated Bactericidal Activity of the Antifungal Caspofungin against Vancomycin-Resistant Enterococcus faecium
- 2020
-
In: Antimicrobial Agents and Chemotherapy. - : AMER SOC MICROBIOLOGY. - 0066-4804 .- 1098-6596. ; 64:10
-
Journal article (peer-reviewed)abstract
- Enterococcus faecium has become a major opportunistic pathogen with the emergence of vancomycin-resistant enterococci (VRE). As part of the gut microbiota, they have to cope with numerous stresses, including effects of antibiotics and other xenobiotics, especially in patients hospitalized in intensive care units (ICUs) who receive many medications. The aim of this study was to investigate the impact of the most frequently prescribed xenobiotics for ICU patients on fitness, pathogenicity, and antimicrobial resistance of the vanB-positive E. faecium Aus0004 reference strain. Several phenotypic analyses were carried out, and we observed that caspofungin, an antifungal agent belonging to the family of echinocandins, had an important effect on E. faecium growth in vitro. We confirmed this effect by electron microscopy and peptidoglycan analysis and showed that, even at a subinhibitory concentration (1/4x MIC, 8 mg/liter), caspofungin had an impact on cell wall organization, especially with respect to the abundance of some muropeptide precursors. By transcriptome sequencing (RNA-seq), it was also shown that around 20% of the transcriptome was altered in the presence of caspofungin, with 321 and 259 significantly upregulated and downregulated genes, respectively. Since the fungal target of caspofungin (i.e., beta-1,3-glucan synthase) was absent in bacteria, the mechanistic pathway of caspofungin activity was investigated. The repression of genes involved in the metabolism of pyruvate seemed to have a drastic impact on bacterial cell viability, while a decrease of glycerol metabolism could explain the conformational modifications of peptidoglycan. This is the first report of caspofungin antibacterial activity against E. faecium, highlighting the potential impact of nonantibiotic xenobiotics against bacterial pathogens.
|
|
7. |
- Jones, Geraint H., et al.
(author)
-
The Comet Interceptor Mission
- 2024
-
In: Space Science Reviews. - : Springer Nature. - 0038-6308 .- 1572-9672. ; 220:1
-
Journal article (peer-reviewed)abstract
- Here we describe the novel, multi-point Comet Interceptor mission. It is dedicated to the exploration of a little-processed long-period comet, possibly entering the inner Solar System for the first time, or to encounter an interstellar object originating at another star. The objectives of the mission are to address the following questions: What are the surface composition, shape, morphology, and structure of the target object? What is the composition of the gas and dust in the coma, its connection to the nucleus, and the nature of its interaction with the solar wind? The mission was proposed to the European Space Agency in 2018, and formally adopted by the agency in June 2022, for launch in 2029 together with the Ariel mission. Comet Interceptor will take advantage of the opportunity presented by ESA’s F-Class call for fast, flexible, low-cost missions to which it was proposed. The call required a launch to a halo orbit around the Sun-Earth L2 point. The mission can take advantage of this placement to wait for the discovery of a suitable comet reachable with its minimum Δ V capability of 600 ms − 1 . Comet Interceptor will be unique in encountering and studying, at a nominal closest approach distance of 1000 km, a comet that represents a near-pristine sample of material from the formation of the Solar System. It will also add a capability that no previous cometary mission has had, which is to deploy two sub-probes – B1, provided by the Japanese space agency, JAXA, and B2 – that will follow different trajectories through the coma. While the main probe passes at a nominal 1000 km distance, probes B1 and B2 will follow different chords through the coma at distances of 850 km and 400 km, respectively. The result will be unique, simultaneous, spatially resolved information of the 3-dimensional properties of the target comet and its interaction with the space environment. We present the mission’s science background leading to these objectives, as well as an overview of the scientific instruments, mission design, and schedule.
|
|
8. |
- Jones, Lesley, et al.
(author)
-
Convergent genetic and expression data implicate immunity in Alzheimer's disease
- 2015
-
In: Alzheimer's & Dementia. - : Wiley. - 1552-5260 .- 1552-5279. ; 11:6, s. 658-671
-
Journal article (peer-reviewed)abstract
- Background: Late-onset Alzheimer's disease (AD) is heritable with 20 genes showing genome-wide association in the International Genomics of Alzheimer's Project (IGAP). To identify the biology underlying the disease, we extended these genetic data in a pathway analysis. Methods: The ALIGATOR and GSEA algorithms were used in the IGAP data to identify associated functional pathways and correlated gene expression networks in human brain. Results: ALIGATOR identified an excess of curated biological pathways showing enrichment of association. Enriched areas of biology included the immune response (P = 3.27 X 10(-12) after multiple testing correction for pathways), regulation of endocytosis (P = 1.31 X 10(-11)), cholesterol transport (P = 2.96 X 10(-9)), and proteasome-ubiquitin activity (P = 1.34 X 10(-6)). Correlated gene expression analysis identified four significant network modules, all related to the immune response (corrected P = .002-.05). Conclusions: The immime response, regulation of endocytosis, cholesterol transport, and protein ubiquitination represent prime targets for AD therapeutics.
|
|
9. |
- Kehoe, Laura, et al.
(author)
-
Make EU trade with Brazil sustainable
- 2019
-
In: Science. - : American Association for the Advancement of Science (AAAS). - 0036-8075 .- 1095-9203. ; 364:6438, s. 341-
-
Journal article (other academic/artistic)
|
|
10. |
- Mewton, Nathan, et al.
(author)
-
Rationale and design of the Cyclosporine to ImpRove Clinical oUtcome in ST-elevation myocardial infarction patients (the CIRCUS trial)
- 2015
-
In: American Heart Journal. - : Elsevier BV. - 1097-6744 .- 0002-8703. ; 169:6, s. 6-766
-
Journal article (peer-reviewed)abstract
- Background Both acute myocardial ischemia and reperfusion contribute to cardiomyocyte death in ST-elevation myocardial infarction (STEMI). The final infarct size is the principal determinant of subsequent clinical outcome in STEMI patients. In a proof-of-concept phase II trial, the administration of cyclosporine prior to primary percutaneous coronary intervention (PPCI) has been associated with a reduction of infarct size in STEMI patients. Methods CIRCUS is an international, prospective, multicenter, randomized, double-blinded, placebo-controlled trial. The study is designed to compare the efficacy and safety of cyclosporine versus placebo, in addition to revascularization by PPCI, in patients presenting with acute anterior myocardial infarction within 12 hours of symptoms onset and initial TIMI flow <= 1 in the culprit left anterior descending coronary artery. Patients are randomized in a 1: 1 fashion to 2.5 mg/kg intravenous infusion of cyclosporine or matching placebo performed in theminutes preceding PCI. The primary efficacy end point of CIRCUS is a composite of 1-year all-cause mortality, rehospitalization for heart failure or heart failure worsening during initial hospitalization, and left ventricular adverse remodeling as determined by sequential transthoracic echochardiography. Secondary outcomes will be tested using a hierarchical sequence of left ventricular (LV) ejection fraction and absolute measurements of LV volumes. The composite of death and rehospitalization for heart failure or heart failure worsening during initial hospitalization will be further assessed at three years after the initial infarction. Results Recruitment lasted from April 2011 to February 2014. The CIRCUS trial has recruited 975 patients with acute anterior myocardial infarction. The 12-months results are expected to be available in 2015. Conclusions The CIRCUS trial is testing the hypothesis that cyclosporine in addition to early revascularization with PPCI compared to placebo in patients with acute anterior myocardial infarction reduces the incidence of death, heart failure and adverse LV remodeling at one-year follow-up.
|
|
11. |
- Renard, Jean-Baptiste, et al.
(author)
-
LOAC : a small aerosol optical counter/sizer for ground-based and balloon measurements of the size distribution and nature of atmospheric particles - Part 1
- 2016
-
In: Atmospheric Measurement Techniques. - : Copernicus GmbH. - 1867-1381 .- 1867-8548. ; 9:4, s. 1721-1742
-
Journal article (peer-reviewed)abstract
- The study of aerosols in the troposphere and in the stratosphere is of major importance both for climate and air quality studies. Among the numerous instruments available, optical aerosol particles counters (OPCs) provide the size distribution in diameter range from about 100 nm to a few tens of mu m. Most of them are very sensitive to the nature of aerosols, and this can result in significant biases in the retrieved size distribution. We describe here a new versatile optical particle/sizer counter named LOAC (Light Optical Aerosol Counter), which is light and compact enough to perform measurements not only at the surface but under all kinds of balloons in the troposphere and in the stratosphere. LOAC is an original OPC performing observations at two scattering angles. The first one is around 12 degrees, and is almost insensitive to the refractive index of the particles; the second one is around 60 degrees and is strongly sensitive to the refractive index of the particles. By combining measurement at the two angles, it is possible to retrieve the size distribution between 0.2 and 100 mu m and to estimate the nature of the dominant particles (droplets, carbonaceous, salts and mineral particles) when the aerosol is relatively homogeneous. This typology is based on calibration charts obtained in the laboratory. The uncertainty for total concentrations measurements is +/- 20% when concentrations are higher than 1 particle cm 3 (for a 10 min integration time). For lower concentrations, the uncertainty is up to about +/- 60% for concentrations smaller than 10 2 particle cm(-3). Also, the uncertainties in size calibration are +/- 0.025 mu m for particles smaller than 0.6 mu m, 5% for particles in the 0.7-2 mu m range, and 10% for particles greater than 2 mu m. The measurement accuracy of sub-micronic particles could be reduced in a strongly turbid case when concentration of particles > 3 mu m exceeds a few particles cm(-3). Several campaigns of cross-comparison of LOAC with other particle counting instruments and remote sensing photometers have been conducted to validate both the size distribution derived by LOAC and the retrieved particle number density. The typology of the aerosols has been validated in well-defined conditions including urban pollution, desert dust episodes, sea spray, fog, and cloud. Comparison with reference aerosol mass monitoring instruments also shows that the LOAC measurements can be successfully converted to mass concentrations.
|
|
12. |
- Renard, Jean-Baptiste, et al.
(author)
-
LOAC : a small aerosol optical counter/sizer for ground-based and balloon measurements of the size distribution and nature of atmospheric particles - Part 2
- 2016
-
In: Atmospheric Measurement Techniques. - : Copernicus GmbH. - 1867-1381 .- 1867-8548. ; 9:8, s. 3673-3686
-
Journal article (peer-reviewed)abstract
- In the companion (Part I) paper, we have described and evaluated a new versatile optical particle counter/sizer named LOAC (Light Optical Aerosol Counter), based on scattering measurements at angles of 12 and 60A degrees. That allows for some typology identification of particles (droplets, carbonaceous, salts, and mineral dust) in addition to size-segregated counting in a large diameter range from 0.2aEuro-A mu m up to possibly more than 100aEuro-A mu m depending on sampling conditions (Renard et al., 2016). Its capabilities overpass those of preceding optical particle counters (OPCs) allowing the characterization of all kind of aerosols from submicronic-sized absorbing carbonaceous particles in polluted air to very coarse particles (> 10-20aEuro-A mu m in diameter) in desert dust plumes or fog and clouds. LOAC's light and compact design allows measurements under all kinds of balloons, on-board unmanned aerial vehicles (UAVs) and at ground level. We illustrate here the first LOAC airborne results obtained from a UAV and a variety of scientific balloons. The UAV was deployed in a peri-urban environment near Bordeaux in France. Balloon operations include (i) tethered balloons deployed in urban environments in Vienna (Austria) and Paris (France), (ii) pressurized balloons drifting in the lower troposphere over the western Mediterranean (during the Chemistry-Aerosol Mediterranean Experiment - ChArMEx campaigns), (iii) meteorological sounding balloons launched in the western Mediterranean region (ChArMEx) and from Aire-sur-l'Adour in south-western France (VOLTAIRE-LOAC campaign). More focus is put on measurements performed in the Mediterranean during (ChArMEx) and especially during African dust transport events to illustrate the original capability of balloon-borne LOAC to monitor in situ coarse mineral dust particles. In particular, LOAC has detected unexpected large particles in desert sand plumes.
|
|
13. |
- Wiedner, M.C., et al.
(author)
-
Heterodyn receiver for the Origins Space Telescope concept 2
- 2018
-
In: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. ; 10698
-
Conference paper (peer-reviewed)abstract
- The Origins Space Telescope (OST) is a NASA study for a large satellite mission to be submitted to the 2020 Decadal Review. The proposed satellite has a fleet of instruments including the HEterodyne Receivers for OST (HERO). HERO is designed around the quest to follow the trail of water from the ISM to disks around protostars and planets. HERO will perform high-spectral resolution measurements with 2x9 pixel focal plane arrays at any frequency between 468GHz to 2,700GHz (617 to 111 μm). HERO builds on the successful Herschel/HIFI heritage, as well as recent technological innovations, allowing it to surpass any prior heterodyne instrument in terms of sensitivity and spectral coverage.
|
|
14. |
- Wiedner, M.C., et al.
(author)
-
Heterodyne Receiver for Origins
- 2021
-
In: Journal of Astronomical Telescopes, Instruments, and Systems. - 2329-4221 .- 2329-4124. ; 7:1
-
Journal article (peer-reviewed)abstract
- The Heterodyne Receiver for Origins (HERO) is the first detailed study of a heterodyne focal plane array receiver for space applications. HERO gives the Origins Space Telescope the capability to observe at very high spectral resolution (R = 107) over an unprecedentedly large far-infrared (FIR) wavelengths range (111 to 617 μm) with high sensitivity, with simultaneous dual polarization and dual-frequency band operation. The design is based on prior successful heterodyne receivers, such as Heterodyne Instrument for the Far-Infrared/Herschel, but surpasses it by one to two orders of magnitude by exploiting the latest technological developments. Innovative components are used to keep the required satellite resources low and thus allowing for the first time a convincing design of a large format heterodyne array receiver for space. HERO on Origins is a unique tool to explore the FIR universe and extends the enormous potential of submillimeter astronomical spectroscopy into new areas of astronomical research.
|
|
15. |
- Aad, G, et al.
(author)
-
Alignment of the ATLAS Inner Detector in Run 2
- 2020
-
In: European Physical Journal C. - : Springer Science and Business Media LLC. - 1434-6044 .- 1434-6052. ; 80:12
-
Journal article (peer-reviewed)abstract
- The performance of the ATLAS Inner Detector alignment has been studied using pp collision data at s=13TeV collected by the ATLAS experiment during Run 2 (2015–2018) of the Large Hadron Collider (LHC). The goal of the detector alignment is to determine the detector geometry as accurately as possible and correct for time-dependent movements. The Inner Detector alignment is based on the minimization of track-hit residuals in a sequence of hierarchical levels, from global mechanical assembly structures to local sensors. Subsequent levels have increasing numbers of degrees of freedom; in total there are almost 750,000. The alignment determines detector geometry on both short and long timescales, where short timescales describe movements within an LHC fill. The performance and possible track parameter biases originating from systematic detector deformations are evaluated. Momentum biases are studied using resonances decaying to muons or to electrons. The residual sagitta bias and momentum scale bias after alignment are reduced to less than ∼0.1TeV-1 and 0.9 × 10 - 3, respectively. Impact parameter biases are also evaluated using tracks within jets. © 2020, The Author(s).
|
|
16. |
- Aad, G, et al.
(author)
-
ATLAS data quality operations and performance for 2015-2018 data-taking
- 2020
-
In: Journal of Instrumentation. - : Institute of Physics Publishing (IOPP). - 1748-0221. ; 15:4
-
Journal article (peer-reviewed)abstract
- The ATLAS detector at the Large Hadron Collider reads out particle collision data from over 100 million electronic channels at a rate of approximately 100 kHz, with a recording rate for physics events of approximately 1 kHz. Before being certified for physics analysis at computer centres worldwide, the data must be scrutinised to ensure they are clean from any hardware or software related issues that may compromise their integrity. Prompt identification of these issues permits fast action to investigate, correct and potentially prevent future such problems that could render the data unusable. This is achieved through the monitoring of detector-level quantities and reconstructed collision event characteristics at key stages of the data processing chain. This paper presents the monitoring and assessment procedures in place at ATLAS during 2015-2018 data-taking. Through the continuous improvement of operational procedures, ATLAS achieved a high data quality efficiency, with 95.6% of the recorded proton-proton collision data collected at s=13 TeV certified for physics analysis.
|
|
17. |
- Aad, G, et al.
(author)
-
Beam-induced and cosmic-ray backgrounds observed in the ATLAS detector during the LHC 2012 proton-proton running period
- 2016
-
In: Journal of Instrumentation. - : IOP PUBLISHING LTD. - 1748-0221. ; 11:5
-
Journal article (peer-reviewed)abstract
- This paper discusses various observations on beam-induced and cosmic-ray backgrounds in the ATLAS detector during the LHC 2012 proton-proton run. Building on published results based on 2011 data, the correlations between background and residual pressure of the beam vacuum are revisited. Ghost charge evolution over 2012 and its role for backgrounds are evaluated. New methods to monitor ghost charge with beam-gas rates are presented and observations of LHC abort gap population by ghost charge are discussed in detail. Fake jets from colliding bunches and from ghost charge are analysed with improved methods, showing that ghost charge in individual radio-frequency buckets of the LHC can be resolved. Some results of two short periods of dedicated cosmic-ray background data-taking are shown; in particular cosmic-ray muon induced fake jet rates are compared to Monte Carlo simulations and to the fake jet rates from beam background. A thorough analysis of a particular LHC fill, where abnormally high background was observed, is presented. Correlations between backgrounds and beam intensity losses in special fills with very high β∗ are studied. © 2016 CERN for the benefit of the ATLAS collaboration.
|
|
18. |
- Aad, G, et al.
(author)
-
Combination of searches for Higgs boson pairs in pp collisions at s=13TeV with the ATLAS detector
- 2020
-
In: Physics Letters, Section B: Nuclear, Elementary Particle and High-Energy Physics. - : Elsevier BV. - 0370-2693 .- 1873-2445. ; 800
-
Journal article (peer-reviewed)abstract
- This letter presents a combination of searches for Higgs boson pair production using up to 36.1 fb−1 of proton–proton collision data at a centre-of-mass energy s=13 TeV recorded with the ATLAS detector at the LHC. The combination is performed using six analyses searching for Higgs boson pairs decaying into the bb¯bb¯, bb¯W+W−, bb¯τ+τ−, W+W−W+W−, bb¯γγ and W+W−γγ final states. Results are presented for non-resonant and resonant Higgs boson pair production modes. No statistically significant excess in data above the Standard Model predictions is found. The combined observed (expected) limit at 95% confidence level on the non-resonant Higgs boson pair production cross-section is 6.9 (10) times the predicted Standard Model cross-section. Limits are also set on the ratio (κλ) of the Higgs boson self-coupling to its Standard Model value. This ratio is constrained at 95% confidence level in observation (expectation) to −5.0
|
|
19. |
- Aad, G, et al.
(author)
-
Combined measurements of Higgs boson production and decay using up to 80 fb-1 of proton-proton collision data at s =13 TeV collected with the ATLAS experiment
- 2020
-
In: Physical Review D. - : AMER PHYSICAL SOC. - 1550-2368. ; 101:1
-
Journal article (peer-reviewed)abstract
- Combined measurements of Higgs boson production cross sections and branching fractions are presented. The combination is based on the analyses of the Higgs boson decay modes H→γγ, ZZ∗, WW∗, ττ, bb, μμ, searches for decays into invisible final states, and on measurements of off-shell Higgs boson production. Up to 79.8 fb-1 of proton-proton collision data collected at s=13 TeV with the ATLAS detector are used. Results are presented for the gluon-gluon fusion and vector-boson fusion processes, and for associated production with vector bosons or top-quarks. The global signal strength is determined to be μ=1.11-0.08+0.09. The combined measurement yields an observed (expected) significance for the vector-boson fusion production process of 6.5σ (5.3σ). Measurements in kinematic regions defined within the simplified template cross section framework are also shown. The results are interpreted in terms of modifiers applied to the Standard Model couplings of the Higgs boson to other particles, and are used to set exclusion limits on parameters in two-Higgs-doublet models and in the simplified minimal supersymmetric Standard Model. No significant deviations from Standard Model predictions are observed. © 2020 CERN. © 2020 CERN, for the ATLAS Collaboration. Published by the American Physical Society under the terms of the "https://creativecommons.org/licenses/by/4.0/" Creative Commons Attribution 4.0 International license. Further distribution of this work must maintain attribution to the author(s) and the published article's title, journal citation, and DOI. Funded by SCOAP3.
|
|
20. |
- Aad, G., et al.
(author)
-
Commissioning of the ATLAS Muon Spectrometer with cosmic rays
- 2010
-
In: European Physical Journal C. Particles and Fields. - : Springer Science and Business Media LLC. - 1434-6044 .- 1434-6052. ; 70:3, s. 875-916
-
Journal article (peer-reviewed)abstract
- The ATLAS detector at the Large Hadron Collider has collected several hundred million cosmic ray events during 2008 and 2009. These data were used to commission the Muon Spectrometer and to study the performance of the trigger and tracking chambers, their alignment, the detector control system, the data acquisition and the analysis programs. We present the performance in the relevant parameters that determine the quality of the muon measurement. We discuss the single element efficiency, resolution and noise rates, the calibration method of the detector response and of the alignment system, the track reconstruction efficiency and the momentum measurement. The results show that the detector is close to the design performance and that the Muon Spectrometer is ready to detect muons produced in high energy proton-proton collisions.
|
|
21. |
- Aad, G, et al.
(author)
-
Differential cross-section measurements for the electroweak production of dijets in association with a Z boson in proton–proton collisions at ATLAS
- 2021
-
In: European Physical Journal C. - : Springer Science and Business Media LLC. - 1434-6044 .- 1434-6052. ; 81:2
-
Journal article (peer-reviewed)abstract
- Differential cross-section measurements are presented for the electroweak production of two jets in association with a Z boson. These measurements are sensitive to the vector-boson fusion production mechanism and provide a fundamental test of the gauge structure of the Standard Model. The analysis is performed using proton–proton collision data collected by ATLAS at s=13TeV and with an integrated luminosity of 139fb-1. The differential cross-sections are measured in the Z→ ℓ+ℓ- decay channel (ℓ= e, μ) as a function of four observables: the dijet invariant mass, the rapidity interval spanned by the two jets, the signed azimuthal angle between the two jets, and the transverse momentum of the dilepton pair. The data are corrected for the effects of detector inefficiency and resolution and are sufficiently precise to distinguish between different state-of-the-art theoretical predictions calculated using Powheg+Pythia8, Herwig7+Vbfnlo and Sherpa 2.2. The differential cross-sections are used to search for anomalous weak-boson self-interactions using a dimension-six effective field theory. The measurement of the signed azimuthal angle between the two jets is found to be particularly sensitive to the interference between the Standard Model and dimension-six scattering amplitudes and provides a direct test of charge-conjugation and parity invariance in the weak-boson self-interactions. © 2020, The Author(s).
|
|
22. |
- Aad, G, et al.
(author)
-
Dijet Resonance Search with Weak Supervision Using s =13 TeV pp Collisions in the ATLAS Detector
- 2020
-
In: Physical Review Letters. - : American Physical Society (APS). - 1079-7114 .- 0031-9007. ; 125:13
-
Journal article (peer-reviewed)abstract
- This Letter describes a search for narrowly resonant new physics using a machine-learning anomaly detection procedure that does not rely on signal simulations for developing the analysis selection. Weakly supervised learning is used to train classifiers directly on data to enhance potential signals. The targeted topology is dijet events and the features used for machine learning are the masses of the two jets. The resulting analysis is essentially a three-dimensional search A→BC, for mA∼O(TeV), mB,mC∼O(100 GeV) and B, C are reconstructed as large-radius jets, without paying a penalty associated with a large trials factor in the scan of the masses of the two jets. The full run 2 s=13 TeV pp collision dataset of 139 fb-1 recorded by the ATLAS detector at the Large Hadron Collider is used for the search. There is no significant evidence of a localized excess in the dijet invariant mass spectrum between 1.8 and 8.2 TeV. Cross-section limits for narrow-width A, B, and C particles vary with mA, mB, and mC. For example, when mA=3 TeV and mBâ200 GeV, a production cross section between 1 and 5 fb is excluded at 95% confidence level, depending on mC. For certain masses, these limits are up to 10 times more sensitive than those obtained by the inclusive dijet search. These results are complementary to the dedicated searches for the case that B and C are standard model bosons. © 2020 CERN.
|
|
23. |
- Aad, G, et al.
(author)
-
Evidence for the production of three massive vector bosons with the ATLAS detector
- 2019
-
In: Physics Letters, Section B: Nuclear, Elementary Particle and High-Energy Physics. - : Elsevier BV. - 0370-2693 .- 1873-2445. ; 798
-
Journal article (peer-reviewed)abstract
- A search for the production of three massive vector bosons in proton–proton collisions is performed using data at s=13 TeV recorded with the ATLAS detector at the Large Hadron Collider in the years 2015–2017, corresponding to an integrated luminosity of 79.8 fb−1. Events with two same-sign leptons ℓ (electrons or muons) and at least two reconstructed jets are selected to search for WWW→ℓνℓνqq. Events with three leptons without any same-flavour opposite-sign lepton pairs are used to search for WWW→ℓνℓνℓν, while events with three leptons and at least one same-flavour opposite-sign lepton pair and one or more reconstructed jets are used to search for WWZ→ℓνqqℓℓ. Finally, events with four leptons are analysed to search for WWZ→ℓνℓνℓℓ and WZZ→qqℓℓℓℓ. Evidence for the joint production of three massive vector bosons is observed with a significance of 4.1 standard deviations, where the expectation is 3.1 standard deviations. © 2019 The Author(s)
|
|
24. |
- Aad, G, et al.
(author)
-
Evidence for tt¯ tt¯ production in the multilepton final state in proton–proton collisions at √s=13 TeV with the ATLAS detector
- 2020
-
In: European Physical Journal C. - : Springer Science and Business Media LLC. - 1434-6044 .- 1434-6052. ; 80:11
-
Journal article (peer-reviewed)abstract
- A search is presented for four-top-quark production using an integrated luminosity of 139 fb- 1 of proton–proton collision data at a centre-of-mass energy of 13TeV collected by the ATLAS detector at the LHC. Events are selected if they contain a same-sign lepton pair or at least three leptons (electrons or muons). Jet multiplicity, jet flavour and event kinematics are used to separate signal from the background through a multivariate discriminant, and dedicated control regions are used to constrain the dominant backgrounds. The four-top-quark production cross section is measured to be 24-6+7 fb. This corresponds to an observed (expected) significance with respect to the background-only hypothesis of 4.3 (2.4) standard deviations and provides evidence for this process. © 2020, CERN for the benefit of the ATLAS collaboration.
|
|
25. |
- Aad, G, et al.
(author)
-
Exclusive dimuon production in ultraperipheral Pb + Pb collisions at √sNN= 5.02 TeV with ATLAS
- 2021
-
In: Physical Review C. - : American Physical Society. - 2469-9985 .- 2469-9993. ; 104:2
-
Journal article (peer-reviewed)abstract
- Exclusive dimuon production in ultraperipheral collisions (UPC), resulting from photon-photon interactions in the strong electromagnetic fields of colliding high-energy lead nuclei, PbPb(γγ) → μ+μ-(Pb(∗)Pb(∗)), is studied using Lint = 0.48 nb-1 of √sNN = 5.02 TeV lead-lead collision data at the LHC with the ATLAS detector. Dimuon pairs are measured in the fiducial region pT,μ > 4 GeV, |ημ| <2.4, invariant mass mμμ > 10 GeV, and pT,μμ <2 GeV. The primary background from single-dissociative processes is extracted from the data using a template fitting technique. Differential cross sections are presented as a function of mμμ, absolute pair rapidity (|yμμ|), scattering angle in the dimuon rest frame (|cos $μμ∗|), and the colliding photon energies. The total cross section of the UPC γγ → μ+μ- process in the fiducial volume is measured to be σfidμμ = 34.1±0.3(stat.)±0.7(syst.) μb. Generally good agreement is found with calculations from STARlight, which incorporate the leading-order Breit-Wheeler process with no final-state effects, albeit differences between the measurements and theoretical expectations are observed. In particular, the measured cross sections at larger |yμμ| are found to be about 10-20% larger in data than in the calculations, suggesting the presence of larger fluxes of photons in the initial state. Modification of the dimuon cross sections in the presence of forward and/or backward neutron production is also studied and is found to be associated with a harder incoming photon spectrum, consistent with expectations. © 2021 CERN.
|
|
26. |
- Aad, G., et al.
(author)
-
Higgs boson production cross-section measurements and their EFT interpretation in the 4ℓ decay channel at s√=13 TeV with the ATLAS detector
- 2020
-
In: European Physical Journal C. Particles and Fields. - : Springer Science and Business Media LLC. - 1434-6052 .- 1434-6044. ; 80:10
-
Journal article (peer-reviewed)abstract
- Higgs boson properties are studied in the four-lepton decay channel (where lepton = e, μ) using 139 fb−1 of proton–proton collision data recorded at s√=13 TeV by the ATLAS experiment at the Large Hadron Collider. The inclusive cross-section times branching ratio for H→ZZ∗ decay is measured to be 1.34±0.12 pb for a Higgs boson with absolute rapidity below 2.5, in good agreement with the Standard Model prediction of 1.33±0.08 pb. Cross-sections times branching ratio are measured for the main Higgs boson production modes in several exclusive phase-space regions. The measurements are interpreted in terms of coupling modifiers and of the tensor structure of Higgs boson interactions using an effective field theory approach. Exclusion limits are set on the CP-even and CP-odd ‘beyond the Standard Model’ couplings of the Higgs boson to vector bosons, gluons and top quarks.
|
|
27. |
- Aad, G., et al.
(author)
-
Identification and energy calibration of hadronically decaying tau leptons with the ATLAS experiment in pp collisions at root s=8 TeV
- 2015
-
In: European Physical Journal C. Particles and Fields. - : Springer Science and Business Media LLC. - 1434-6044 .- 1434-6052. ; 75:7
-
Journal article (peer-reviewed)abstract
- This paper describes the trigger and offline reconstruction, identification and energy calibration algorithms for hadronic decays of tau leptons employed for the data collected from pp collisions in 2012 with the ATLAS detector at the LHC center-of-mass energy root s = 8 TeV. The performance of these algorithms is measured in most cases with Z decays to tau leptons using the full 2012 dataset, corresponding to an integrated luminosity of 20.3 fb(-1). An uncertainty on the offline reconstructed tau energy scale of 2-4%, depending on transverse energy and pseudorapidity, is achieved using two independent methods. The offline tau identification efficiency is measured with a precision of 2.5% for hadronically decaying tau leptons with one associated track, and of 4% for the case of three associated tracks, inclusive in pseudorapidity and for a visible transverse energy greater than 20 GeV. For hadronic tau lepton decays selected by offline algorithms, the tau trigger identification efficiency is measured with a precision of 2-8%, depending on the transverse energy. The performance of the tau algorithms, both offline and at the trigger level, is found to be stable with respect to the number of concurrent proton-proton interactions and has supported a variety of physics results using hadronically decaying tau leptons at ATLAS.
|
|
28. |
- Aad, G, et al.
(author)
-
Identification of boosted Higgs bosons decaying into b-quark pairs with the ATLAS detector at 13 TeV
- 2019
-
In: European Physical Journal C. - : Springer Science and Business Media LLC. - 1434-6044 .- 1434-6052. ; 79:10
-
Journal article (peer-reviewed)abstract
- This paper describes a study of techniques for identifying Higgs bosons at high transverse momenta decaying into bottom-quark pairs, H→ bb¯ , for proton–proton collision data collected by the ATLAS detector at the Large Hadron Collider at a centre-of-mass energy s=13 TeV. These decays are reconstructed from calorimeter jets found with the anti-ktR= 1.0 jet algorithm. To tag Higgs bosons, a combination of requirements is used: b-tagging of R= 0.2 track-jets matched to the large-R calorimeter jet, and requirements on the jet mass and other jet substructure variables. The Higgs boson tagging efficiency and corresponding multijet and hadronic top-quark background rejections are evaluated using Monte Carlo simulation. Several benchmark tagging selections are defined for different signal efficiency targets. The modelling of the relevant input distributions used to tag Higgs bosons is studied in 36 fb- 1 of data collected in 2015 and 2016 using g→ bb¯ and Z(→ bb¯) γ event selections in data. Both processes are found to be well modelled within the statistical and systematic uncertainties. © 2019, CERN for the benefit of the ATLAS collaboration.
|
|
29. |
- Aad, G., et al.
(author)
-
Integrated and differential fiducial cross-section measurements for the vector boson fusion production of the Higgs boson in the H → WW* → eνμν decay channel at 13 TeV with the ATLAS detector
- 2023
-
In: Physical Review D. - : AMER PHYSICAL SOC. - 2470-0010 .- 2470-0029. ; 108:7
-
Journal article (peer-reviewed)abstract
- The vector-boson production cross section for the Higgs boson decay in the H→WW*→eνμν channel is measured as a function of kinematic observables sensitive to the Higgs boson production and decay properties as well as integrated in a fiducial phase space. The analysis is performed using the proton-proton collision data collected by the ATLAS detector in Run 2 of the LHC at √s=13 TeV center-of-mass energy, corresponding to an integrated luminosity of 139 fb−1. The different flavor final state is studied by selecting an electron and a muon originating from a pair of W bosons and compatible with the Higgs boson decay. The data are corrected for the effects of detector inefficiency and resolution, and the measurements are compared with different state-of-the-art theoretical predictions. The differential cross sections are used to constrain anomalous interactions described by dimension-six operators in an effective field theory.
|
|
30. |
- Aad, G, et al.
(author)
-
Jet energy scale and resolution measured in proton–proton collisions at √s=13 TeV with the ATLAS detector
- 2021
-
In: European Physical Journal C. - : Springer Science and Business Media LLC. - 1434-6044 .- 1434-6052. ; 81:8
-
Journal article (peer-reviewed)abstract
- Jet energy scale and resolution measurements with their associated uncertainties are reported for jets using 36–81 fb−1 of proton–proton collision data with a centre-of-mass energy of s√=13 TeV collected by the ATLAS detector at the LHC. Jets are reconstructed using two different input types: topo-clusters formed from energy deposits in calorimeter cells, as well as an algorithmic combination of charged-particle tracks with those topo-clusters, referred to as the ATLAS particle-flow reconstruction method. The anti-kt jet algorithm with radius parameter R=0.4 is the primary jet definition used for both jet types. This result presents new jet energy scale and resolution measurements in the high pile-up conditions of late LHC Run 2 as well as a full calibration of particle-flow jets in ATLAS. Jets are initially calibrated using a sequence of simulation-based corrections. Next, several in situ techniques are employed to correct for differences between data and simulation and to measure the resolution of jets. The systematic uncertainties in the jet energy scale for central jets (|η|<1.2) vary from 1% for a wide range of high-pT jets (2502.5 TeV). The relative jet energy resolution is measured and ranges from (24±1.5)% at 20 GeV to (6±0.5)% at 300 GeV.
|
|
31. |
- Aad, G, et al.
(author)
-
Measurement of angular and momentum distributions of charged particles within and around jets in Pb+Pb and pp collisions at sNN =5.02 TeV with the ATLAS detector
- 2019
-
In: Physical Review C. - : AMER PHYSICAL SOC. - 2469-9985 .- 2469-9993. ; 100:6
-
Journal article (peer-reviewed)abstract
- Studies of the fragmentation of jets into charged particles in heavy-ion collisions can provide information about the mechanism of jet quenching by the hot and dense QCD matter created in such collisions, the quark-gluon plasma. This paper presents a measurement of the angular distribution of charged particles around the jet axis in sNN=5.02 TeV Pb+Pb and pp collisions, using the ATLAS detector at the LHC. The Pb+Pb and pp data sets have integrated luminosities of 0.49nb-1 and 25pb-1, respectively. The measurement is performed for jets reconstructed with the anti-kt algorithm with radius parameter R=0.4 and is extended to an angular distance of r=0.8 from the jet axis. Results are presented as a function of Pb+Pb collision centrality and distance from the jet axis for charged particles with transverse momenta in the 1- to 63-GeV range, matched to jets with transverse momenta in the 126- to 316-GeV range and an absolute value of jet rapidity of less than 1.7. Modifications to the measured distributions are quantified by taking a ratio to the measurements in pp collisions. Yields of charged particles with transverse momenta below 4 GeV are observed to be increasingly enhanced as a function of angular distance from the jet axis, reaching a maximum at r=0.6. Charged particles with transverse momenta above 4 GeV have an enhanced yield in Pb+Pb collisions in the jet core for angular distances up to r=0.05 from the jet axis, with a suppression at larger distances.
|
|
32. |
|
|
33. |
- Aad, G, et al.
(author)
-
Measurement of Azimuthal Anisotropy of Muons from Charm and Bottom Hadrons in pp Collisions at s =13 TeV with the ATLAS Detector
- 2020
-
In: Physical Review Letters. - : AMER PHYSICAL SOC. - 1079-7114 .- 0031-9007. ; 124:8
-
Journal article (peer-reviewed)abstract
- The elliptic flow of muons from the decay of charm and bottom hadrons is measured in pp collisions at √s=13 TeV using a data sample with an integrated luminosity of 150 pb-1 recorded by the ATLAS detector at the LHC. The muons from heavy-flavor decay are separated from light-hadron decay muons using momentum imbalance between the tracking and muon spectrometers. The heavy-flavor decay muons are further separated into those from charm decay and those from bottom decay using the distance-of-closest-approach to the collision vertex. The measurement is performed for muons in the transverse momentum range 4-7 GeV and pseudorapidity range |η| < 2.4. A significant nonzero elliptic anisotropy coefficient v2 is observed for muons from charm decays, while the v2 value for muons from bottom decays is consistent with zero within uncertainties.
|
|
34. |
- Aad, G, et al.
(author)
-
Measurement of b-quark fragmentation properties in jets using the decay B± → J/ψK± in pp collisions at s√ = 13 TeV with the ATLAS detector
- 2021
-
In: Journal of High Energy Physics. - : Springer. - 1029-8479 .- 1126-6708. ; 2021:12
-
Journal article (peer-reviewed)abstract
- The fragmentation properties of jets containing b-hadrons are studied using charged B mesons in 139 fb−1 of pp collisions at s√ = 13 TeV, recorded with the ATLAS detector at the LHC during the period from 2015 to 2018. The B mesons are reconstructed using the decay of B± into J/ψK±, with the J/ψ decaying into a pair of muons. Jets are reconstructed using the anti-kt algorithm with radius parameter R = 0.4. The measurement determines the longitudinal and transverse momentum profiles of the reconstructed B hadrons with respect to the axes of the jets to which they are geometrically associated. These distributions are measured in intervals of the jet transverse momentum, ranging from 50 GeV to above 100 GeV. The results are corrected for detector effects and compared with several Monte Carlo predictions using different parton shower and hadronisation models. The results for the longitudinal and transverse profiles provide useful inputs to improve the description of heavy-flavour fragmentation in jets.
|
|
35. |
- Aad, G, et al.
(author)
-
Measurement of distributions sensitive to the underlying event in inclusive Z boson production in pp collisions at √s = 13 TeV with the ATLAS detector
- 2019
-
In: European Physical Journal C. - : Springer Science and Business Media LLC. - 1434-6044 .- 1434-6052. ; 79:8
-
Journal article (peer-reviewed)abstract
- This paper presents measurements of charged-particle distributions sensitive to the properties of the underlying event in events containing a Z boson decaying into a muon pair. The data were obtained using the ATLAS detector at the LHC in proton–proton collisions at a centre-of-mass energy of 13 Te with an integrated luminosity of 3.2fb-1. Distributions of the charged-particle multiplicity and of the charged-particle transverse momentum are measured in regions of the azimuth defined relative to the Z boson direction. The measured distributions are compared with the predictions of various Monte Carlo generators which implement different underyling event models. The Monte Carlo model predictions qualitatively describe the data well, but with some significant discrepancies. © 2019, CERN for the benefit of the ATLAS collaboration.
|
|
36. |
- Aad, G., et al.
(author)
-
Measurement of exclusive gamma gamma -> l(+)l(-) production in proton-proton collisions at root s=7 TeV with the ATLAS detector
- 2015
-
In: Physics Letters. Section B: Nuclear, Elementary Particle and High-Energy Physics. - : Elsevier BV. - 0370-2693 .- 1873-2445. ; 749, s. 242-261
-
Journal article (peer-reviewed)abstract
- This Letter reports a measurement of the exclusive gamma gamma -> l(+)l(-) (l = e, mu) cross-section in proton-proton collisions at a centre-of-mass energy of 7 TeV by the ATLAS experiment at the LHC, based on an integrated luminosity of 4.6 fb(-1). For the electron or muon pairs satisfying exclusive selection criteria, a fit to the dilepton acoplanarity distribution is used to extract the fiducial cross-sections. The cross-section in the electron channel is determined to be sigma(excl)(gamma gamma -> e+e-) = 0.428 +/- 0.035 (stat.) +/- 0.018 (syst.) pbfor a phase-space region with invariant mass of the electron pairs greater than 24GeV, in which both electrons have transverse momentum p(T) > 12 GeV and pseudorapidity vertical bar eta vertical bar < 2.4. For muon pairs with invariant mass greater than 20GeV, muon transverse momentum pT> 10 GeV and pseudorapidity vertical bar eta vertical bar < 2.4, the cross-section is determined to be sigma(excl)(gamma gamma -> mu+mu-) = 0.628 +/- 0.032(stat.) +/- 0.021 (syst.) pb. When proton absorptive effects due to the finite size of the proton are taken into account in the theory calculation, the measured cross-sections are found to be consistent with the theory prediction. (C) 2015 CERN for the benefit of the ATLAS Collaboration. Published by Elsevier B.V.
|
|
37. |
- Aad, G, et al.
(author)
-
Measurement of flow harmonics correlations with mean transverse momentum in lead–lead and proton–lead collisions at √sNN=5.02TeV with the ATLAS detector
- 2019
-
In: European Physical Journal C. - : Springer Science and Business Media LLC. - 1434-6044 .- 1434-6052. ; 79:12
-
Journal article (peer-reviewed)abstract
- To assess the properties of the quark–gluon plasma formed in ultrarelativistic ion collisions, the ATLAS experiment at the LHC measures a correlation between the mean transverse momentum and the flow harmonics. The analysis uses data samples of lead–lead and proton–lead collisions obtained at the centre-of-mass energy per nucleon pair of 5.02 TeV, corresponding to total integrated luminosities of 22μb-1 and 28nb-1, respectively. The measurement is performed using a modified Pearson correlation coefficient with the charged-particle tracks on an event-by-event basis. The modified Pearson correlation coefficients for the 2nd-, 3rd-, and 4th-order flow harmonics are measured in the lead–lead collisions as a function of event centrality quantified as the number of charged particles or the number of nucleons participating in the collision. The measurements are performed for several intervals of the charged-particle transverse momentum. The correlation coefficients for all studied harmonics exhibit a strong centrality evolution, which only weakly depends on the charged-particle momentum range. In the proton–lead collisions, the modified Pearson correlation coefficient measured for the 2nd-order flow harmonics shows only weak centrality dependence. The lead-lead data is qualitatively described by the predictions based on the hydrodynamical model.
|
|
38. |
- Aad, G, et al.
(author)
-
Measurement of hadronic event shapes in high-p T multijet final states at √s = 13 TeV with the ATLAS detector
- 2021
-
In: Journal of High Energy Physics. - : Springer Nature. - 1029-8479 .- 1126-6708. ; 2021:1
-
Journal article (peer-reviewed)abstract
- A measurement of event-shape variables in proton-proton collisions at large momentum transfer is presented using data collected at s = 13 TeV with the ATLAS detector at the Large Hadron Collider. Six event-shape variables calculated using hadronic jets are studied in inclusive multijet events using data corresponding to an integrated luminosity of 139 fb−1. Measurements are performed in bins of jet multiplicity and in different ranges of the scalar sum of the transverse momenta of the two leading jets, reaching scales beyond 2 TeV. These measurements are compared with predictions from Monte Carlo event generators containing leading-order or next-to-leading order matrix elements matched to parton showers simulated to leading-logarithm accuracy. At low jet multiplicities, shape discrepancies between the measurements and the Monte Carlo predictions are observed. At high jet multiplicities, the shapes are better described but discrepancies in the normalisation are observed. [Figure not available: see fulltext.] © 2021, The Author(s).
|
|
39. |
- Aad, G, et al.
(author)
-
Measurement of isolated-photon plus two-jet production in pp collisions at √s = 13 TeV with the ATLAS detector
- 2020
-
In: Journal of High Energy Physics. - : Springer. - 1029-8479 .- 1126-6708. ; 2020:3
-
Journal article (peer-reviewed)abstract
- The dynamics of isolated-photon plus two-jet production in pp collisions at a centre-of-mass energy of 13 TeV are studied with the ATLAS detector at the LHC using a dataset corresponding to an integrated luminosity of 36.1 fb−1. Cross sections are measured as functions of a variety of observables, including angular correlations and invariant masses of the objects in the final state, γ + jet + jet. Measurements are also performed in phase-space regions enriched in each of the two underlying physical mechanisms, namely direct and fragmentation processes. The measurements cover the range of photon (jet) transverse momenta from 150 GeV (100 GeV) to 2 TeV. The tree-level plus parton-shower predictions from Sherpa and Pythia as well as the next-to-leading-order QCD predictions from Sherpa are compared with the measurements. The next-to-leading-order QCD predictions describe the data adequately in shape and normalisation except for regions of phase space such as those with high values of the invariant mass or rapidity separation of the two jets, where the predictions overestimate the data. [Figure not available: see fulltext.] © 2020, The Author(s).
|
|
40. |
- Aad, G, et al.
(author)
-
Measurement of KS0 and Λ production in tt¯ dileptonic events in pp collisions at √s= 7 TeV with the ATLAS detector
- 2019
-
In: European Physical Journal C. - : Springer Science and Business Media LLC. - 1434-6044 .- 1434-6052. ; 79:12
-
Journal article (peer-reviewed)abstract
- Measurements of KS0 and Λ production in tt¯ final states have been performed. They are based on a data sample with integrated luminosity of 4.6 fb - 1 from proton–proton collisions at a centre-of-mass energy of 7 TeV, collected in 2011 with the ATLAS detector at the Large Hadron Collider. Neutral strange particles are separated into three classes, depending on whether they are contained in a jet, with or without a b-tag, or not associated with a selected jet. The aim is to look for differences in their main kinematic distributions. A comparison of data with several Monte Carlo simulations using different hadronisation and fragmentation schemes, colour reconnection models and different tunes for the underlying event has been made. The production of neutral strange particles in tt¯ dileptonic events is found to be well described by current Monte Carlo models for KS0 and Λ production within jets, but not for those produced outside jets. © 2019, CERN for the benefit of the ATLAS collaboration.
|
|
41. |
- Aad, G, et al.
(author)
-
Measurement of light-by-light scattering and search for axion-like particles with 2.2 nb−1 of Pb+Pb data with the ATLAS detector
- 2021
-
In: Journal of High Energy Physics. - : SPRINGER. - 1029-8479 .- 1126-6708. ; 2021:3
-
Journal article (peer-reviewed)abstract
- This paper describes a measurement of light-by-light scattering based on Pb+Pb collision data recorded by the ATLAS experiment during Run 2 of the LHC. The study uses 2.2 nb−1 of integrated luminosity collected in 2015 and 2018 at sNN = 5.02 TeV. Light-by-light scattering candidates are selected in events with two photons produced exclusively, each with transverse energy ETγ> 2.5 GeV, pseudorapidity |ηγ| < 2.37, diphoton invariant mass mγγ> 5 GeV, and with small diphoton transverse momentum and diphoton acoplanarity. The integrated and differential fiducial cross sections are measured and compared with theoretical predictions. The diphoton invariant mass distribution is used to set limits on the production of axion-like particles. This result provides the most stringent limits to date on axion-like particle production for masses in the range 6–100 GeV. Cross sections above 2 to 70 nb are excluded at the 95% CL in that mass interval. [Figure not available: see fulltext.] © 2021, The Author(s).
|
|
42. |
- Aad, G, et al.
(author)
-
Measurement of single top-quark production in association with a W boson in the single-lepton channel at √s=8TeV with the ATLAS detector
- 2021
-
In: European Physical Journal C. - : Springer Science and Business Media LLC. - 1434-6044 .- 1434-6052. ; 81:8
-
Journal article (peer-reviewed)abstract
- The production cross-section of a top quark in association with a W boson is measured using proton–proton collisions at s√=8TeV. The dataset corresponds to an integrated luminosity of 20.2fb−1, and was collected in 2012 by the ATLAS detector at the Large Hadron Collider at CERN. The analysis is performed in the single-lepton channel. Events are selected by requiring one isolated lepton (electron or muon) and at least three jets. A neural network is trained to separate the tW signal from the dominant tt¯ background. The cross-section is extracted from a binned profile maximum-likelihood fit to a two-dimensional discriminant built from the neural-network output and the invariant mass of the hadronically decaying W boson. The measured cross-section is σtW=26±7pb, in good agreement with the Standard Model expectation.
|
|
43. |
- Aad, G, et al.
(author)
-
Measurement of the CP-violating phase ϕs in Bs0→J/ψϕ decays in ATLAS at 13 TeV
- 2021
-
In: European Physical Journal C. - : Springer Science and Business Media LLC. - 1434-6044 .- 1434-6052. ; 81:4
-
Journal article (peer-reviewed)abstract
- A measurement of the Bs0→J/ψϕ decay parameters using 80.5fb-1 of integrated luminosity collected with the ATLAS detector from 13 Te proton–proton collisions at the LHC is presented. The measured parameters include the CP-violating phase ϕs, the width difference Δ Γ s between the Bs0 meson mass eigenstates and the average decay width Γ s. The values measured for the physical parameters are combined with those from 19.2fb-1 of 7 and 8 Te data, leading to the following: ϕs=-0.087±0.036(stat.)±0.021(syst.)radΔΓs=0.0657±0.0043(stat.)±0.0037(syst.)ps-1Γs=0.6703±0.0014(stat.)±0.0018(syst.)ps-1Results for ϕs and Δ Γ s are also presented as 68% confidence level contours in the ϕs–Δ Γ s plane. Furthermore the transversity amplitudes and corresponding strong phases are measured. ϕs and Δ Γ s measurements are in agreement with the Standard Model predictions. © 2021, The Author(s).
|
|
44. |
- Aad, G, et al.
(author)
-
Measurement of the inclusive cross-section for the production of jets in association with a Z boson in proton–proton collisions at 8 TeV using the ATLAS detector
- 2019
-
In: European Physical Journal C. - : Springer Science and Business Media LLC. - 1434-6044 .- 1434-6052. ; 79:10
-
Journal article (peer-reviewed)abstract
- The inclusive cross-section for jet production in association with a Z boson decaying into an electron–positron pair is measured as a function of the transverse momentum and the absolute rapidity of jets using 19.9 fb- 1 of s=8 TeV proton–proton collision data collected with the ATLAS detector at the Large Hadron Collider. The measured Z+ jets cross-section is unfolded to the particle level. The cross-section is compared with state-of-the-art Standard Model calculations, including the next-to-leading-order and next-to-next-to-leading-order perturbative QCD calculations, corrected for non-perturbative and QED radiation effects. The results of the measurements cover final-state jets with transverse momenta up to 1 TeV, and show good agreement with fixed-order calculations. © 2019, CERN for the benefit of the ATLAS collaboration.
|
|
45. |
- Aad, G, et al.
(author)
-
Measurement of the inclusive isolated-photon cross section in pp collisions at √s = 13 TeV using 36 fb−1 of ATLAS data
- 2019
-
In: Journal of High Energy Physics. - : SPRINGER. - 1029-8479 .- 1126-6708. ; 2019:10
-
Journal article (peer-reviewed)abstract
- The differential cross section for isolated-photon production in pp collisions is measured at a centre-of-mass energy of 13 TeV with the ATLAS detector at the LHC using an integrated luminosity of 36.1 fb−1. The differential cross section is presented as a function of the photon transverse energy in different regions of photon pseudorapidity. The differential cross section as a function of the absolute value of the photon pseudorapidity is also presented in different regions of photon transverse energy. Next-to-leading-order QCD calculations from Jetphox and Sherpa as well as next-to-next-to-leading-order QCD calculations from Nnlojet are compared with the measurement, using several parameterisations of the proton parton distribution functions. The predictions provide a good description of the data within the experimental and theoretical uncertainties.
|
|
46. |
- Aad, G, et al.
(author)
-
Measurement of the Lund Jet Plane Using Charged Particles in 13 TeV Proton-Proton Collisions with the ATLAS Detector
- 2020
-
In: Physical Review Letters. - : American Physical Society (APS). - 1079-7114 .- 0031-9007. ; 124:22
-
Journal article (peer-reviewed)abstract
- The prevalence of hadronic jets at the LHC requires that a deep understanding of jet formation and structure is achieved in order to reach the highest levels of experimental and theoretical precision. There have been many measurements of jet substructure at the LHC and previous colliders, but the targeted observables mix physical effects from various origins. Based on a recent proposal to factorize physical effects, this Letter presents a double-differential cross-section measurement of the Lund jet plane using 139 fb^{-1} of sqrt[s]=13 TeV proton-proton collision data collected with the ATLAS detector using jets with transverse momentum above 675 GeV. The measurement uses charged particles to achieve a fine angular resolution and is corrected for acceptance and detector effects. Several parton shower Monte Carlo models are compared with the data. No single model is found to be in agreement with the measured data across the entire plane.
|
|
47. |
- Aad, G., et al.
(author)
-
Measurement of the Sensitivity of Two-Particle Correlations in pp Collisions to the Presence of Hard Scatterings
- 2023
-
In: Physical Review Letters. - : American Physical Society. - 0031-9007 .- 1079-7114. ; 131:16
-
Journal article (peer-reviewed)abstract
- A key open question in the study of multiparticle production in high-energy pp collisions is the relationship between the “ridge”—i.e., the observed azimuthal correlations between particles in the underlying event that extend over all rapidities—and hard or semihard scattering processes. In particular, it is not known whether jets or their soft fragments are correlated with particles in the underlying event. To address this question, two-particle correlations are measured in pp collisions at √s=13 TeV using data collected by the ATLAS experiment at the LHC, with an integrated luminosity of 15.8 pb−1, in two different configurations. In the first case, charged particles associated with jets are excluded from the correlation analysis, while in the second case, correlations are measured between particles within jets and charged particles from the underlying event. Second-order flow coefficients, v2, are presented as a function of event multiplicity and transverse momentum. These measurements show that excluding particles associated with jets does not affect the measured correlations. Moreover, particles associated with jets do not exhibit any significant azimuthal correlations with the underlying event, ruling out hard processes contributing to the ridge.
|
|
48. |
- Aad, G, et al.
(author)
-
Measurement of the top-quark mass in tt¯ + 1-jet events collected with the ATLAS detector in pp collisions at √s = 8 TeV
- 2019
-
In: Journal of High Energy Physics. - : SPRINGER. - 1029-8479 .- 1126-6708. ; 2019:11
-
Journal article (peer-reviewed)abstract
- A determination of the top-quark mass is presented using 20.2 fb−1 of 8 TeV proton-proton collision data produced by the Large Hadron Collider and collected by the ATLAS experiment. The normalised differential cross section of top-quark pair production in association with an energetic jet is measured in the lepton+jets final state and unfolded to parton and particle levels. The unfolded distribution at parton level can be described using next-to-leading-order QCD predictions in terms of either the top-quark pole mass or the running mass as defined in the (modified) minimal subtraction scheme. A comparison between the experimental distribution and the theoretical prediction allows the top-quark mass to be extracted in the two schemes. The value obtained for the pole-mass scheme is: mtpole=171.1±0.4(stat)±0.9(syst)−0.3+0.7(theo)GeV The extracted value in the running-mass scheme is: mt(mt)=162.9±0.5(stat)±1.0(syst)−1.2+2.1(theo)GeV. The results for the top-quark mass using the two schemes are consistent, when translated from one scheme to the other. [Figure not available: see fulltext.] © 2019, The Author(s).
|
|
49. |
- Aad, G, et al.
(author)
-
Measurement of the transverse momentum distribution of Drell–Yan lepton pairs in proton–proton collisions at √s=13 TeV with the ATLAS detector
- 2020
-
In: European Physical Journal C. - : Springer Science and Business Media LLC. - 1434-6044 .- 1434-6052. ; 80:7
-
Journal article (peer-reviewed)abstract
- This paper describes precision measurements of the transverse momentum pTℓℓ (ℓ= e, μ) and of the angular variable ϕη∗ distributions of Drell–Yan lepton pairs in a mass range of 66–116 GeV. The analysis uses data from 36.1 fb- 1 of proton–proton collisions at a centre-of-mass energy of s=13TeV collected by the ATLAS experiment at the LHC in 2015 and 2016. Measurements in electron-pair and muon-pair final states are performed in the same fiducial volumes, corrected for detector effects, and combined. Compared to previous measurements in proton–proton collisions at s=7 and 8TeV, these new measurements probe perturbative QCD at a higher centre-of-mass energy with a different composition of initial states. They reach a precision of 0.2% for the normalized spectra at low values of pTℓℓ. The data are compared with different QCD predictions, where it is found that predictions based on resummation approaches can describe the full spectrum within uncertainties. © 2020, CERN for the benefit of the ATLAS collaboration.
|
|
50. |
- Aad, G, et al.
(author)
-
Measurement of the Z(→ ℓ + ℓ −)γ production cross-section in pp collisions at √s = 13 TeV with the ATLAS detector
- 2020
-
In: Journal of High Energy Physics. - : SPRINGER. - 1029-8479 .- 1126-6708. ; 2020:3
-
Journal article (peer-reviewed)abstract
- The production of a prompt photon in association with a Z boson is studied in proton-proton collisions at a centre-of-mass energy s = 13 TeV. The analysis uses a data sample with an integrated luminosity of 139 fb−1 collected by the ATLAS detector at the LHC from 2015 to 2018. The production cross-section for the process pp → ℓ+ℓ−γ + X (ℓ = e, μ) is measured within a fiducial phase-space region defined by kinematic requirements on the photon and the leptons, and by isolation requirements on the photon. An experimental precision of 2.9% is achieved for the fiducial cross-section. Differential cross-sections are measured as a function of each of six kinematic variables characterising the ℓ+ℓ−γ system. The data are compared with theoretical predictions based on next-to-leading-order and next-to-next-to-leading-order perturbative QCD calculations. The impact of next-to-leading-order electroweak corrections is also considered.
|
|