1. |
- Weinstein, John N., et al.
(författare)
-
The cancer genome atlas pan-cancer analysis project
- 2013
-
Ingår i: Nature Genetics. - : Springer Science and Business Media LLC. - 1546-1718 .- 1061-4036. ; 45:10, s. 1113-1120
-
Forskningsöversikt (refereegranskat)abstract
- The Cancer Genome Atlas (TCGA) Research Network has profiled and analyzed large numbers of human tumors to discover molecular aberrations at the DNA, RNA, protein and epigenetic levels. The resulting rich data provide a major opportunity to develop an integrated picture of commonalities, differences and emergent themes across tumor lineages. The Pan-Cancer initiative compares the first 12 tumor types profiled by TCGA. Analysis of the molecular aberrations and their functional roles across tumor types will teach us how to extend therapies effective in one cancer type to others with a similar genomic profile. © 2013 Nature America, Inc. All rights reserved.
|
|
2. |
- Zhu, Bin, et al.
(författare)
-
Charge separation and transport in La0.6Sr0.4Co0.2Fe0.8O3-delta and ion-doping ceria heterostructure material for new generation fuel cell
- 2017
-
Ingår i: Nano Energy. - : Elsevier. - 2211-2855 .- 2211-3282. ; 37, s. 195-202
-
Tidskriftsartikel (refereegranskat)abstract
- Functionalities in heterostructure oxide material interfaces are an emerging subject resulting in extraordinary material properties such as great enhancement in the ionic conductivity in a heterostructure between a semiconductor SrTiO3 and an ionic conductor YSZ (yttrium stabilized zirconia), which can be expected to have a profound effect in oxygen ion conductors and solid oxide fuel cells [1-4]. Hereby we report a semiconductorionic heterostructure La0.6Sr0.4Co0.2Fe0.8O3-delta (LSCF) and Sm-Ca co-doped ceria (SCDC) material possessing unique properties for new generation fuel cells using semiconductor-ionic heterostructure composite materials. The LSCF-SCDC system contains both ionic and electronic conductivities, above 0.1 S/cm, but used as the electrolyte for the fuel cell it has displayed promising performance in terms of OCV (above 1.0 V) and enhanced power density (ca. 1000 mW/cm(2) at 550 degrees C). Such high electronic conduction in the electrolyte membrane does not cause any short-circuiting problem in the device, instead delivering enhanced power output. Thus, the study of the charge separation/transport and electron blocking mechanism is crucial and can play a vital role in understanding the resulting physical properties and physics of the materials and device. With atomic level resolution ARM 200CF microscope equipped with the electron energy-loss spectroscopy (EELS) analysis, we can characterize more accurately the buried interface between the LSCF and SCDC further reveal the properties and distribution of charge carriers in the heterostructures. This phenomenon constrains the carrier mobility and determines the charge separation and devices' fundamental working mechanism; continued exploration of this frontier can fulfill a next generation fuel cell based on the new concept of semiconductor-ionic fuel cells (SIFCs).
|
|
3. |
- Deng, Hui, et al.
(författare)
-
An ionic conductor Ce0.8Sm0.2O2_(delta) (SDC) and semiconductor Sm0.5Sr0.5CoO3 (SSC) composite for high performance electrolyte-free fuel cell
- 2017
-
Ingår i: International journal of hydrogen energy. - : PERGAMON-ELSEVIER SCIENCE LTD. - 0360-3199 .- 1879-3487. ; 42:34, s. 22228-22234
-
Tidskriftsartikel (refereegranskat)abstract
- An advanced electrolyte-free fuel cell (EFFC) was developed. In the EFFC, a composite layer made from a mixture of ionic conductor (Ce0.8Sm0.2O2_(delta), SDC) and semiconductor (Sm0.5Sr0.5CoO3, SSC) was adopted to replace the electrolyte layer. The crystal structure, morphology and electrical properties of the composite were characterized by X-ray diffraction analysis (XRD), scanning electron microscope (SEM), and electrochemical impedance spectrum (EIS). Various ratios of SDC to SSC in the composite were modulated to achieve balanced ionic and electronic conductivities and good fuel cell performances. Fuel cell with an optimum ratio of 3SDC:2SSC (wt.%) reached the maximum power density of 741 mW cm(-2) at 550 degrees C. The results have illuminated that the SDC-SCC layer, similar to a conventional cathode, can replace the electrolyte to make the EFFC functions when the ionic and electronic conductivities were balanced.
|
|
4. |
- Du, Ji, et al.
(författare)
-
A Comprehensive Performance Comparison of DFT-S DMT and QAM-DMT in UOWC System in Different Water Environments
- 2021
-
Ingår i: IEEE Photonics Journal. - : Institute of Electrical and Electronics Engineers (IEEE). - 1943-0655. ; 13:1
-
Tidskriftsartikel (refereegranskat)abstract
- In this paper, we experimentally demonstrate a 450-nm laser underwater optical wireless transmission system, in which a comprehensive investigation is made to show the significant performance improvement of the discrete Fourier transform spread discrete multi-tone (DFT-S DMT) as compared to the conventional quadrature amplitude modulation discrete multi-tone (QAM-DMT) modulation. DFT-S DMT outperforms QAM-DMT in terms of bit error rate (BER) performance due to low peak-to-average-power ratio (PAPR) and capability of counteracting high frequency fading in a band-limited underwater optical wireless communication (UOWC) system. In order to avoid signal-to-noise-ratio (SNR) degradation at fringe subcarriers, several zeros are padded at the edge of each block before DFT-S operation. The experimental results show the superiority of DFT-S DMT compared with QAM-DMT in different water environments, including turbidities, bubbles, and water flow. Data rates of similar to 16.16 Gbps and similar to 13.96 Gbps at a BER of 3.8 x 10(-3) are achieved by 16-QAM DFT-S DMT and 16-QAM-DMT over a 5-m water channel, respectively, which indicates that capacity enhancement of similar to 2.2 Gbps is obtained by the DFT-S DMT. Meanwhile, over 3-dB receiver sensitivity improvement can always be achieved by the DFT-S DMT at the tested underwater transmission distances. Combined with adaptive bit-power loading, 20.04 Gbps over a 5-m "clear ocean" channel transmission with a single laser diode (LD) is demonstrated. For a 35-m water link, the distance-data rate product reaches 498.4 Gbps*m. To the best of our knowledge, both the data rate and distance-data rate product are the largest among all the results reported for a single visible LD. Aimed at high-speed deep ocean applications, the studies are promising for future UOWC research.
|
|
5. |
|
|
6. |
- Wang, Yu, et al.
(författare)
-
Biomaterial-Based “Structured Opals” with Programmable Combination of Diffractive Optical Elements and Photonic Bandgap Effects
- 2019
-
Ingår i: Advanced Materials. - : Wiley-VCH Verlagsgesellschaft. - 0935-9648 .- 1521-4095. ; 31:5
-
Tidskriftsartikel (refereegranskat)abstract
- Naturally occurring iridescent systems produce brilliant color displays through multiscale, hierarchical assembly of structures that combine reflective, diffractive, diffusive, or absorbing domains. The fabrication of biopolymer-based, hierarchical 3D photonic crystals through the use of a topographical templating strategy that allows combined optical effects derived from the interplay of predesigned 2D and 3D geometries is reported here. This biomaterials-based approach generates 2D diffractive optics composed of 3D nanophotonic lattices that allow simultaneous control over the reflection (through the 3D photonic bandgap) and the transmission (through 2D diffractive structuring) of light with the additional utility of being constituted by a biocompatible, implantable, edible commodity textile material. The use of biopolymers allows additional degrees of freedom in photonic bandgap design through directed protein conformation modulation. Demonstrator structures are presented to illustrate the lattice multifunctionality, including tunable diffractive properties, increased angle of view of photonic crystals, color-mixing, and sensing applications.
|
|
7. |
- Zhu, Bin, et al.
(författare)
-
Functional semiconductor-ionic composite GDC-KZnAl/LiNiCuZnOx for single-component fuel cell
- 2014
-
Ingår i: RSC Advances. - : Royal Society of Chemistry (RSC). - 2046-2069. ; 4:20, s. 9920-9925
-
Tidskriftsartikel (refereegranskat)abstract
- The research activities on single-component fuel cells (SCFCs) have opened new doors for keeping ahead with two major areas of focus: improvement of SCFC performances by contributing new materials, and scientific understanding of the SCFC nature and operation mode. The present work reports the exploitation of new material composed of the Gd doped ceria-KAlZn-oxide (GDC-KAZ) and the LiNiCuZn-oxide (LNCZ), combining ionic and semiconducting properties for SCFCs. A new method is first used through an internal electron-hole redox cycle resulting in no net electrons to avoid ceria electronic conduction problems thus to develop an excellent GDC-KAZ electrolyte. Its ionic conductivity, 0.08 S cm(-1) at 600 degrees C, is ten times higher than that of GDC. The SCFC using the GDC-KAZ-LNCZ materials exhibits a remarkable electrochemical performance of 628 mW cm(-2) at 580 degrees C, significantly higher than that of conventional three-component (anode/electrolyte/cathode) fuel cells. The results bring about a new cost-effective and robust system with significant scientific and economic consequences for the fuel cell field.
|
|