SwePub
Sök i SwePub databas

  Utökad sökning

Träfflista för sökning "AMNE:(NATURVETENSKAP Kemi Materialkemi) "

Sökning: AMNE:(NATURVETENSKAP Kemi Materialkemi)

  • Resultat 1-50 av 6996
Sortera/gruppera träfflistan
   
NumreringReferensOmslagsbildHitta
1.
  •  
2.
  •  
3.
  • Maurina Morais, Eduardo, 1989, et al. (författare)
  • Solvent-free synthesis of protic ionic liquids. Synthesis, characterization and computational studies of triazolium based ionic liquids
  • 2022
  • Ingår i: Journal of Molecular Liquids. - : Elsevier BV. - 0167-7322. ; 360
  • Tidskriftsartikel (refereegranskat)abstract
    • A series of triazolium and imidazolium based protic ionic liquids were synthesized using a solvent-free method designed to address several limitations encountered with other commonly used methods. Using this method, pure (98–99% m/m) and dry (128–553 ppm of water) protic ionic liquids were synthesized (in a laboratory scale) without the need for purification methods that require heating the ionic liquid, hence avoiding the common issue of thermal decomposition. This method was also designed to allow for the accurate measurement of acid and base, and for the controlled mixing of both compounds, which is essential to avoid producing impure protic ionic liquids with excess of either acid or base. The system is constructed of only glass and chemically resistant polymer (PTFE and PVDF) parts, which avoid other contaminants that can result from unwanted reactions involving the reagents with common laboratory tools (metallic objects, paper, plastic, etc.). This process is described in detail in the paper as well as in a video. The resulting ionic liquids were carefully analyzed by spectroscopic and thermal methods designed to avoid water absorption, which is known to affect their properties. To complement this experimental characterization, computational chemistry tools were used to assess the ionic liquids’ properties, as well as to assign vibrational modes.
  •  
4.
  • Halldin Stenlid, Joakim, 1987- (författare)
  • Computational Studies of Chemical Interactions: Molecules, Surfaces and Copper Corrosion
  • 2017
  • Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
    • The chemical bond – a corner stone in science and a prerequisite for life – is the focus of this thesis. Fundamental and applied aspects of chemical bonding are covered including the development of new computational methods for the characterization and rationalization of chemical interactions. The thesis also covers the study of corrosion of copper-based materials. The latter is motivated by the proposed use of copper as encapsulating material for spent nuclear fuel in Sweden.In close collaboration with experimental groups, state-of-the-art computational methods were employed for the study of chemistry at the atomic scale. First, oxidation of nanoparticulate copper was examined in anoxic aqueous media in order to better understand the copper-water thermodynamics in relation to the corrosion of copper material under oxygen free conditions. With a similar ambition, the water-cuprite interface was investigated with regards to its chemical composition and reactivity. This was compared to the behavior of methanol and hydrogen sulfide at the cuprite surface.An overall ambition during the development of computational methods for the analysis of chemical bonding was to bridge the gap between molecular and materials chemistry. Theory and results are thus presented and applied in both a molecular and a solid-state framework. A new property, the local electron attachment energy, for the characterization of a compound’s local electrophilicity was introduced. Together with the surface electrostatic potential, the new property predicts and rationalizes regioselectivity and trends of molecular reactions, and interactions on metal and oxide nanoparticles and extended surfaces.Detailed atomistic understanding of chemical processes is a prerequisite for the efficient development of chemistry. We therefore envisage that the results of this thesis will find widespread use in areas such as heterogeneous catalysis, drug discovery, and nanotechnology.
  •  
5.
  • Rahm, Martin, et al. (författare)
  • The Molecular Surface Structure of Ammonium and Potassium Dinitramide : A Vibrational Sum Frequency Spectroscopy and Quantum Chemical Study
  • 2011
  • Ingår i: The Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 115:21, s. 10588-10596
  • Tidskriftsartikel (refereegranskat)abstract
    • Vibrational sum frequency spectroscopy (VSFS) and quantum chemical modeling have been employed to investigate the molecular surface structure of ammonium and potassium dinitramide (ADN and KDN) crystals. Identification of key vibrational modes was made possible by performing density functional theory calculations of molecular clusters. The surface of KDN was found to be partly covered with a thin layer of the decomposition product KNO3, which due to its low thickness was not detectable by infrared and Raman spectroscopy. In contrast, ADN exhibited an extremely inhomogeneous surface, on which polarized dinitramide anions were present, possibly together with a thin layer of NH4NO3. The intertwined use of theoretical and experimental tools proved indispensable in the analysis of these complex surfaces. The experimental verification of polarized and destabilized dinitramide anions stresses the importance of designing surface-active polymer support, stabilizers, and/or coating agents, in order to enable environmentally friendly ADN-based solid-rocket propulsion.
  •  
6.
  •  
7.
  • Maurina Morais, Eduardo, 1989 (författare)
  • Synthesis of protic ionic liquids. Challenges and solutions for the synthesis of pure compounds.
  • 2022
  • Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
    • The urgent need to diversify our energy matrix is responsible for a renewed interest in fuel cell technology, which can use hydrogen gas, a renewable green fuel, as an energy source. This technology is currently a commercially available option, however, it still requires technological improvements before it can be widely used for different applications. One way this technology could potentially be improved is by increasing its temperature range of operation by developing new, anhydrous proton conducting materials. Protic ionic liquids, which are organic salts with low melting temperatures, are interesting candidates for this application, since they can conduct protons in the operational conditions of fuel cells and without the need of water. These compounds can be synthesized by a simple acid-base neutralization reaction, but certain considerations must be taken in order to obtain high quality (dry and pure) protic ionic liquids. In this thesis, a series of triazolium and imidazolium based protic ionic liquids were synthesized using a solvent-free method designed to address several limitations encountered with other commonly used methods. Using this method, pure (98-99% m/m) and dry (128-553 ppm of water) protic ionic liquids were synthesized (in a laboratory scale) without the need for purification methods that require heating the ionic liquid, hence avoiding the common issue of thermal decomposition. This method was also designed to allow for the accurate measurement of acid and base, and for the controlled mixing of both compounds, which is essential to avoid producing impure protic ionic liquids with excess of either acid or base. The system is consists of only glass and chemically resistant polymer(PTFE and PVDF) parts, which avoids other contaminants that can result from unwanted reactions involving the reagents with common laboratory tools (metallic objects, paper, plastic, etc.). The resulting ionic liquids were carefully analyzed by spectroscopic and thermal analysis methods designed to avoid water absorption, which is known to affect their properties. To complement this experimental characterization, computational chemistry tools were used to assess the ionic liquids’ properties, as well as to assign vibrational modes.
  •  
8.
  • Sauer, Christopher, 1993 (författare)
  • Green Aromatics: Catalytic Valorisation of bio-derived 2,5-dimethylfuran over Zeolites and Zeotypes
  • 2022
  • Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
    • This thesis discusses the use of biomass as a potentially green feedstock for the chemical industry in the urgent shift away from fossil resources. I elaborate on reasons why we cannot afford to burn virgin biomass for energy production, among them a variety of ecosystem services that forests and other lands provide. In addition, the utilisation of biomass should be focused on products that sequester and lock away carbon for more extended periods, e.g. timber, materials and chemicals. In particular, biomass can be used as an alternative "carbon neutral" feedstock for the chemical industry, where we can preserve the already existing chemical complexity in the bio-based molecules. One example is the upgrading of furans to benzene, toluene and xylene (BTX) aromatics with the help of zeolite catalysis. These aromatics are important commodity chemicals, where the shift to a bio-based resource could make use of already existing knowledge, catalyst and production infrastructure. However, research is necessary to understand these new feedstock molecules and their interaction with the catalysts and to enable the design of applicable catalysts. In order to study the interaction of the furans, in particular 2,5-dimethylfuran (2,5-dmf), I describe and discuss the development of an analytical methodology that utilises infrared spectroscopy and mass spectrometry for the on-line identification and quantification of product molecules during catalytic reactions. This on-line analysis method is then applied to the catalytic conversion of 2,5-dmf to aromatics over a range of zeolite and zeotype catalysts. In-depth studies with ammonia as a probe molecule of the catalytic active acid sites, as well as temperature programmed experiments with ammonia and 2,5-dmf give insights into product distribution, selectivity changes and deactivation of the catalyst. For example, olefins and aromatics are initially preferred products, while with increasing time on stream, the isomerisation of 2,5-dmf becomes dominant. The incorporation of Ga into the zeotype framework, resulting in a Ga-Silicate, shows how targeted catalyst design can increase overall aromatics production. This catalyst is also suitable for selective isomerisation of 2,5-dmf to 2,4-dimethylfuran, which has a rare substitution pattern. Finally, itwas found that the most valuable of BTX,  p -xylene, can be produced more selectively when 2,5-dmf is pre-adsorbed onto zeolite ZSM-5 and then released during a temperature programmed product desorption.
  •  
9.
  • Shafeie, Samrand, 1984-, et al. (författare)
  • Phase formation, crystal structures and magnetic properties of perovskite-type phases in the system La2Co1+z(MgxTi1-x)1-zO6
  • 2011
  • Ingår i: Journal of Solid State Chemistry. - : Elsevier BV. - 0022-4596 .- 1095-726X. ; 184:1, s. 177-190
  • Tidskriftsartikel (refereegranskat)abstract
    • Perovskite-type cobaltates in the system La(2)Co(1+z) (Mg(x)Ti(1-x))(1-z)O(6) were studied for z=0 <= x <= 0.6 and 0 <= x <= 0.9, using X-ray and neutron powder diffraction, electron diffraction (ED), magnetic susceptibility measurements and X-ray absorption near-edge structure (XANES) spectroscopy. The samples were synthesised using the citrate route in air at 1350 degrees C. The space group symmetry of the structure changes from P2(1)/n via Pbnm to R (3) over barc with both increasing Mg content and increasing Co content. The La(2)Co(Mg(x)Ti(1-x))O(6) (z=0) compounds show anti-ferromagnetic couplings of the magnetic moments for the Co below 15 K for x=0, 0.1 and 0.2. XANES spectra show for the compositions 0 <= x <= 0.5 a linear decrease in the L(3)/(L(3)+ L(2))Co-L(2.3) edge branching ratio with x, in agreement with a decrease of the average Co ion spin-state, from a high-spin to a lower-spin-state, with decreasing nominal Co(2+) ion content.
  •  
10.
  • Rzepka, Przemyslaw, et al. (författare)
  • CO2-Induced Displacement of Na+ and K+ in Zeolite INaKI-A
  • 2018
  • Ingår i: The Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 122:30, s. 17211-17220
  • Tidskriftsartikel (refereegranskat)abstract
    • Adsorption technologies offer opportunities to remove CO2 from gas mixtures, and zeolite A has good properties that include a high capacity for the adsorption of CO2 . It has been argued that its abilities to separate CO2 from N-2 in flue gas and CO2 from CH4 in raw biogas can be further enhanced by replacing Na+ with K+ in the controlling pore window apertures. In this study, several compositions of I Na12-xKxI-A were prepared and studied with respect to the adsorption of CO2 N-2, and CH4, and the detailed structural changes were induced by the adsorption of CO2. The adsorption of CO2 gradually decreased on an increasing content of K+, whereas the adsorption of N-2 and CH4 was completely nulled already at relatively small contents of K. Of the studied samples, INa9K3I-A exhibited the highest CO2 over N-2/CH4 selectivities, with a(CO2/N-2 ) > 21 000 and a(CO2/CH4) > 8000. For samples with and without adsorbed CO2 analyses of powder X-ray diffraction (PXRD) data revealed that K+ preferred to substitute Na+ at the eight-ring sites. The Na(+ )ions at the six-ring sites were gradually replaced by K+ on an increasing content, and these sites split into two positions on both sides of the six-ring mirror plane. It was observed that both the eight-ring and six-ring sites tailored the maximum adsorption capacity for CO2 and possibly also the diffusion of CO2 into the alpha-cavities of INa12-xKxI-A. The adsorption of CH4 and N-2 on the other hand appeared to be controlled by the K+ ions blocking the eight-ring windows. The in situ PXRD study revealed that the positions of the extra-framework cations were displaced into the a-cavities of INa12(_)x,KxI-A on the adsorption of CO2 . For samples with a low content of K+, the repositioning of the cations was consistent with a mutual attraction with the adsorbed CO(2 )molecules.
  •  
11.
  • Artemenko, A., et al. (författare)
  • Reference XPS spectra of amino acids
  • 2021
  • Konferensbidrag (refereegranskat)abstract
    • In this report we present XPS data for five amino acids (AAs) (tryptophan, methionine, glutamine, glutamic acid, and arginine) with different side chain groups measured in solid state (powder form). The theoretically and experimentally obtained chemical structure of AAs are compared. Here, we analyse and discuss C 1 s, N 1 s, O 1s and S 2p core level binding energies, FWHMs, atomic concentrations of the functional groups in AAs. The experimentally obtained and theoretically calculated ratio of atomic concentrations are compared. The zwitterionic nature of methionine and glutamine in solid state was determined from protonated amino groups in N 1s peak and deprotonated carboxylic groups in the C 1s spectrum. The obtained XPS results for AAs well correspond with previously reported data.
  •  
12.
  • Barišić, Antun, et al. (författare)
  • Experimental Data Contributing to the Elusive Surface Charge of Inert Materials in Contact with Aqueous Media
  • 2021
  • Ingår i: Colloids and interfaces. - : MDPI. - 2504-5377. ; 5:1
  • Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
    • We studied the charging of inert surfaces (polytetrafluoroethylene, i.e., PTFE; graphite; graphene; and hydrophobic silica) using classical colloid chemistry approaches. Potentiometric titrations showed that these surfaces acquired less charge from proton-related reactions than oxide minerals. The data from batch-type titrations for PTFE powder did not show an effect of ionic strength, which was also in contrast with results for classical colloids. In agreement with classical colloids, the electrokinetic results for inert surfaces showed the typical salt level dependence. In some cases, the point of zero net proton charge as determined from mass and tentatively from acid–base titration differed from isoelectric points, which has also been previously observed, for example by Chibowski and co-workers for ice electrolyte interfaces. Finally, we found no evidence for surface contaminations of our PTFE particles before and after immersion in aqueous solutions. Only in the presence of NaCl-containing solutions did cryo-XPS detect oxygen from water. We believe that our low isoelectric points for PTFE were not due to impurities. Moreover, the measured buffering at pH 3 could not be explained by sub-micromolar concentrations of contaminants. The most comprehensive explanation for the various sets of data is that hydroxide ion accumulation occurred at the interfaces between inert surfaces and aqueous solutions.
  •  
13.
  • Brinck, Tore, et al. (författare)
  • Green Energetic Materials, Chapter 2: "Theoretical Design of Green Energetic Materials: Predicting Stability, Detection, Synthesis and Performance"
  • 2014
  • Ingår i: Green Energetic Materials. - 9781119941293 ; , s. 15-44
  • Bokkapitel (övrigt vetenskapligt/konstnärligt)abstract
    • Since the end of the 20th century it has been increasingly realised that the use, or production, of many energetic materials leads to the release of substances which are harmful to both humans and the environment. To address this, the principles of green chemistry can be applied to the design of new products and their manufacturing processes, to create green energetic materials that are virtually free of environmental hazards and toxicity issues during manufacturing, storage, use and disposal. Active research is underway to develop new ingredients and formulations, green synthetic methods and non-polluting manufacturing processes.Green Energetic Materials provides a detailed account of the most recent research and developments in the field, including green pyrotechnics, explosives and propellants. From theoretical modelling and design of new materials, to the development of sustainable manufacturing processes, this book addresses materials already on the production line, as well as considering future developments in this evolving field.Topics covered include:Theoretical design of green energetic materialsDevelopment of green pyrotechnicsGreen primary and secondary explosivesOxidisers and binder materials for green propellantsEnvironmentally sustainable manufacturing technologies for energetic materialsElectrochemical methods for synthesis of energetic materials and waste remediationGreen Energetic Materials is a valuable resource for academic, industrial and governmental researchers working on the development of energetic materials, for both military and civilian applications.
  •  
14.
  • Brinck, T, et al. (författare)
  • Green Energetic Materials, Chapter 7: "Green propellants Based on Dinitramide Salts: Mastering Stability and Chemical Compatibility Issues"
  • 2014
  • Ingår i: Green Energetic Materials, kapitel 7. - 9781119941293 ; , s. 179-204
  • Bokkapitel (övrigt vetenskapligt/konstnärligt)abstract
    • Since the end of the 20th century it has been increasingly realised that the use, or production, of many energetic materials leads to the release of substances which are harmful to both humans and the environment. To address this, the principles of green chemistry can be applied to the design of new products and their manufacturing processes, to create green energetic materials that are virtually free of environmental hazards and toxicity issues during manufacturing, storage, use and disposal. Active research is underway to develop new ingredients and formulations, green synthetic methods and non-polluting manufacturing processes.Green Energetic Materials provides a detailed account of the most recent research and developments in the field, including green pyrotechnics, explosives and propellants. From theoretical modelling and design of new materials, to the development of sustainable manufacturing processes, this book addresses materials already on the production line, as well as considering future developments in this evolving field.Topics covered include:Theoretical design of green energetic materialsDevelopment of green pyrotechnicsGreen primary and secondary explosivesOxidisers and binder materials for green propellantsEnvironmentally sustainable manufacturing technologies for energetic materialsElectrochemical methods for synthesis of energetic materials and waste remediationGreen Energetic Materials is a valuable resource for academic, industrial and governmental researchers working on the development of energetic materials, for both military and civilian applications.
  •  
15.
  • Shafeie, Samrand, 1984- (författare)
  • Structure and Properties Investigations of the La2Co1+z(Ti1-xMgx)1-zO6 Perovskite System
  • 2011
  • Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
    • Perovskite based materials have great potentials for various energy applications and the search for new materials for uses in SOFCs has largely been concentrated to this class of compounds. In this search, we have studied perovskite phases in the system La2Co1+z(Ti1-xMgx)1-zO6, with 0  x 0.9 and z = 0.0, 0.2, 0.4, 0.6. Crystal structures were characterized by XRD and, for selected compositions, also by NPD and SAED. They exhibit with increasing x, as well as increasing z, a progressive increase in symmetry from monoclinic to orthorhombic to rhombohedral. The main focus in this work has been on the investigation of structure-property relations for compositions with 0.0 x 0.5 and z = 0. The nominal oxidation state of Co increases for these with increasing x, from Co2+ for x = 0 to Co3+ for x = 0.5. Magnetic measurements and XANES studies showed that the average spin state of Co changes linearly with increasing x, up to x = 0.5, in accordance with varying proportions of Co with two fixed oxidation states, i.e. Co2+ and Co3+. The data suggests that the Co3+ ions have an IS spin state or a mixture of LS and HS spin states for all compositions with nominally only Co2+ and Co3+ ions, possibly with the exception of the composition with x = 0.1, 0.2 and z = 0, for which the data indicate that the spin state might be HS. The XANES data indicate furthermore that for the perovskite phases with z = 0 and x > 0.5, which in the absence of O atom vacancies contain formally Co4+, the highest oxidation state of Co is Co3+, implying that the substitution of Ti4+ by Mg2+ for x ³ 0.5 effects an oxidation of O2- ions rather than an oxidation of Co3+ ions. The thermal expansion was found to increase nearly linearly with increasing oxidation state of Co. This agrees well with findings in previous studies and is attributable to an increase in the ionic radius of Co3+ ions with increasing temperature, due to a thermal excitation from a LS to IS or LS/HS spin states. High temperature electronic conductivity measurements indicate that the electronic conductivity increases with an increase of both relative and absolute amount of Co3+. The latter can be attributed to an increase in the number of Co-O-Co connections. Additional high temperature magnetic measurements for selected samples, whose susceptibilities did not follow a Curie law behaviour up to room temperature, showed effective magnetic moments that did approach plateaus even at high temperatures (900 K). Interpretations of these data are, however, hindered by the samples losing oxygen during the applied heating-cooling cycle. The present study has shown that the investigated system is suitable for further studies, of more fundamental character, which could provide further insight of the structure-property relationships that depend on the oxidation state of Co.
  •  
16.
  • Hedlund, Artur, et al. (författare)
  • Microstructures of cellulose coagulated in water and alcohols from 1-ethyl-3-methylimidazolium acetate : contrasting coagulation mechanisms
  • 2019
  • Ingår i: Cellulose. - : Springer Science and Business Media LLC. - 0969-0239 .- 1572-882X. ; 26:3, s. 1545-1563
  • Tidskriftsartikel (refereegranskat)abstract
    • Abstract: Coagulation of cellulose solutions is a process whereby many useful materials with variable microstructures and properties can be produced. This study investigates the complexity of the phase separation that generates the structural heterogeneity of such materials. The ionic liquid, 1-ethyl-3-methylimidazolium acetate ([C2mim][OAc]), and a co-solvent, dimethylsulfoxide (DMSO), are used to dissolve microcrystalline cellulose in concentrations from 5 to 25 wt%. The solutions are coagulated in water or 2-propanol (2PrOH). The coagulated material is then washed and solvent exchanged (water → 2PrOH → butanone → cyclohexane) in order to preserve the generated microstructures upon subsequent drying before analysis. Sweep electron microscopy images of 50 k magnification reveal open-pore fibrillar structures. The crystalline constituents of those fibrils are estimated using wide-angle X-ray spectroscopy and specific surface area data. It is found that the crystalline order or crystallite size is reduced by an increase in cellulose concentration, by the use of the co-solvent DMSO, or by the use of 2PrOH instead of water as the coagulant. Because previous theories cannot explain these trends, an alternative explanation is presented here focused on solid–liquid versus liquid–liquid phase separations. Graphical abstract: [Figure not available: see fulltext.].
  •  
17.
  • Moth-Poulsen, Kasper, 1978 (författare)
  • Molecular Systems for Solar Thermal Energy Storage and Conversion
  • 2013
  • Ingår i: Organic Synthesis and Molecular Engineering. - Hoboken, NJ, USA : John Wiley & Sons, Inc.. ; , s. 179-196
  • Bokkapitel (övrigt vetenskapligt/konstnärligt)abstract
    • Using a synthetic approach to organic materials chemistry, this book sets forth tested and proven methods and practices that make it possible to engineer organic molecules offering special properties and functions. Throughout the book, plenty of real-world examples demonstrate the countless possibilities of creating one-of-a-kind molecules and supramolecular systems to support a broad range of applications. The book explores applications in both materials and bioorganic chemistry, including molecular electronics, energy storage, sensors, nanomedicine, and enzyme engineering.Organic Synthesis and Molecular Engineering consists of fourteen chapters, each one contributed by one or more leading international experts in the field. The contributions are based on a thorough review and analysis of the current literature as well as the authors' firsthand experience in the lab engineering new organic molecules. Designed as a practical lab reference, the book offers:Tested and proven synthetic approaches to organic materials chemistryMethods and practices to successfully engineer functionality into organic moleculesExplanations of the principles and concepts underlying self-assembly and supramolecular chemistryGuidance in selecting appropriate structural units used in the design and synthesis of functional molecules and materialsCoverage of the full range of applications in materials and bioorganic chemistryA full chapter on graphene, a new topic generating intense researchOrganic Synthesis and Molecular Engineering begins with core concepts, molecular building blocks, and synthetic tools. Next, it explores molecular electronics, supramolecular chemistry and self-assembly, graphene, and photoresponsive materials engineering. In short, it offers everything researchers need to fully grasp the underlying theory and then build new molecules and supramolecular systems.
  •  
18.
  • Singh, Shivangi, 1996 (författare)
  • Investigating hydrothermal stability and influence of water on the activity of Cu-CHA catalysts for NH3-SCR
  • 2024
  • Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
    • Selective catalytic reduction of nitrogen oxides (NOx) with NH3 as a reducing agent (NH3- SCR) is a leading technology for diesel exhaust emission control. Cu-exchanged zeolites with the chabazite structure (Cu-CHA) have emerged as the preferred catalysts thanks to its high activity and hydrothermal stability. Hydrothermal stability is related to dealumination, i.e. removal of aluminum from the zeolite framework to form extraframework aluminum, at high temperatures in the presence of water vapor. Copperexchanged chabazite (Cu-CHA) zeolites have higher hydrothermal stability compared to H-chabazite (H-CHA). To understand the delayed dealumination of Cu-CHA catalysts, we have investigated the reaction paths for dealumination in H-CHA and Cu-CHA using density functional theory (DFT) calculations combined with microkinetic modeling. We find that Cu-CHA and H-CHA follow similar four-step hydrolysis processes, yet the dealumination of Cu-CHA has higher energy barriers, suggesting stabilization of the CHA structure by Cu ions. Furthermore, the preferred reaction product upon complete dealumination of Cu-CHA is a copper-aluminate like species bound to the zeolite framework. The microkinetic analysis quantifies the increased stability of Cu-CHA as compared to H-CHA. In addition to the high-temperature dealumination, we investigated the role of water on low-temperature SCR by experimentally measuring the activity and reaction order of water. The reaction order of water is found to be increasingly negative with increasing water pressure. DFT calculations reveal that water blocks the active Cu-sites and a DFT-based microkinetic model reproduces the measured change of reaction order with water pressure.
  •  
19.
  • Sun, Bing, et al. (författare)
  • Ion transport in polycarbonate based solid polymer electrolytes : experimental and computational investigations
  • 2016
  • Ingår i: Physical Chemistry, Chemical Physics - PCCP. - : Royal Society of Chemistry (RSC). - 1463-9076 .- 1463-9084. ; 18:14, s. 9504-9513
  • Tidskriftsartikel (refereegranskat)abstract
    • Among the alternative host materials for solid polymer electrolytes (SPEs), polycarbonates have recently shown promising functionality in all-solid-state lithium batteries from ambient to elevated temperatures. While the computational and experimental investigations of ion conduction in conventional polyethers have been extensive, the ion transport in polycarbonates has been much less studied. The present work investigates the ionic transport behavior in SPEs based on poly(trimethylene carbonate) (PTMC) and its co-polymer with epsilon-caprolactone (CL) via both experimental and computational approaches. FTIR spectra indicated a preferential local coordination between Li+ and ester carbonyl oxygen atoms in the P(TMC20CL80) co-polymer SPE. Diffusion NMR revealed that the co-polymer SPE also displays higher ion mobilities than PTMC. For both systems, locally oriented polymer domains, a few hundred nanometers in size and with limited connections between them, were inferred from the NMR spin relaxation and diffusion data. Potentiostatic polarization experiments revealed notably higher cationic transference numbers in the polycarbonate based SPEs as compared to conventional polyether based SPEs. In addition, MD simulations provided atomic-scale insight into the structure-dynamics properties, including confirmation of a preferential Li+-carbonyl oxygen atom coordination, with a preference in coordination to the ester based monomers. A coupling of the Li-ion dynamics to the polymer chain dynamics was indicated by both simulations and experiments.
  •  
20.
  • Nedumkandathil, Reji, et al. (författare)
  • Hydrogenation induced structure and property changes in GdGa
  • 2016
  • Ingår i: Journal of Solid State Chemistry. - : Elsevier BV. - 0022-4596 .- 1095-726X. ; 239, s. 184-191
  • Tidskriftsartikel (refereegranskat)abstract
    • Hydrides GdGaH were obtained by exposing the Zintl phase GdGa with the CrB structure to a hydrogen atmosphere at pressures from 1.5 to 50 bar and temperatures from 50 to 500 degrees C. Structural analysis by powder X-ray diffraction suggests that conditions with hydrogen pressures in a range between 15 and 50 bar and temperatures below 500 degrees C afford a uniform hydride phase with the NdGaH1.66 structure (Cmcm, a=3.9867(7) angstrom, b=12.024(2) angstrom, c=4.1009(6) angstrom) which hosts H in two distinct positions, H1 and H2. H1 is coordinated in a tetrahedral fashion by Gd atoms, whereas H2 atoms are inserted between Ga atoms. The assignment of the NdGaH1.66 structure is corroborated by first principles DFT calculations. Modeling of phase and structure stability as a function of composition resulted in excellent agreement with experimental lattice parameters when x=1.66 and revealed the presence of five-atom moieties Ga-H2-Ga-H2-Ga in GdGaH1.66. From in situ powder X-ray diffraction using synchrotron radiation it was established that hydrogenation at temperatures above 200 degrees C affords a hydride with x approximate to 1.3, which is stable up to 500 degrees C, and that additional H absorption, yielding GdGaH1.66, takes place at lower temperatures. Consequently, GdGaH1.66 desorbs H above T=200 degrees C. Without the presence of hydrogen, hydrides GdGaHx decompose at temperatures above 300 degrees C into GdH2 and an unidentified Gd-Ga intermetallics. Thus the hydrogenation of GdGa is not reversible. From magnetic measurements the Curie Weiss constant and effective magnetic moment of GdGaH1.66 were obtained. The former indicates antiferromagnetic interactions, the latter attains a value of similar to 8 mu B which is typical for compounds containing Gd3+ ions.
  •  
21.
  • Sznitko, L., et al. (författare)
  • Low-threshold stimulated emission from lysozyme amyloid fibrils doped with a blue laser dye
  • 2015
  • Ingår i: Applied Physics Letters. - : AIP Publishing. - 0003-6951 .- 1077-3118. ; 106:2
  • Tidskriftsartikel (refereegranskat)abstract
    • © 2015 AIP Publishing LLC. Amyloid fibrils are excellent self-assembling nanotemplates for organic molecules such as dyes. Here, we demonstrate that laser dye-doped lysozyme type fibrils exhibit significantly reduced threshold for stimulated emission compared to that observed in usual matrices. Laser action was studied in slab planar waveguides of the amyloids doped with Stilbene 420 laser dye prepared using a film casting technique. The lowering of the threshold of stimulated emission is analyzed in the context of intrinsic structure of the amyloid nanotemplates, electrostatic interaction of different microstructures with dye molecules, as well as material properties of the cast layers. All these factors are considered to be of importance for introducing gain for random laser operation.
  •  
22.
  • Börjesson, Karl, 1982, et al. (författare)
  • Conjugated anthracene dendrimers with monomer-like fluorescence
  • 2014
  • Ingår i: RSC Advances. - : Royal Society of Chemistry (RSC). - 2046-2069. ; 4:38, s. 19846-19850
  • Tidskriftsartikel (refereegranskat)abstract
    • Two generations of highly emissive conjugated anthracene dendrimers containing up to 9 anthracene units are presented. In these dendrimers, anthracene-like absorption and emission properties are preserved due to the relatively weak electronic coupling between the anthracene units, while evidence of fast crosstalk within the molecular framework is still observed.
  •  
23.
  • Zhou, Yu, et al. (författare)
  • Unveiling the Interfacial Effects for Enhanced Hydrogen Evolution Reaction on MoS2/WTe2 Hybrid Structures
  • 2019
  • Ingår i: Small. - : Wiley-VCH Verlagsgesellschaft. - 1613-6810 .- 1613-6829. ; 15:19
  • Tidskriftsartikel (refereegranskat)abstract
    • Using the MoS2-WTe2 heterostructure as a model system combined with electrochemical microreactors and density function theory calculations, it is shown that heterostructured contacts enhance the hydrogen evolution reaction (HER) activity of monolayer MoS2. Two possible mechanisms are suggested to explain this enhancement: efficient charge injection through large-area heterojunctions between MoS2 and WTe2 and effective screening of mirror charges due to the semimetallic nature of WTe2. The dielectric screening effect is proven minor, probed by measuring the HER activity of monolayer MoS2 on various support substrates with dielectric constants ranging from 4 to 300. Thus, the enhanced HER is attributed to the increased charge injection into MoS2 through large-area heterojunctions. Based on this understanding, a MoS2/WTe2 hybrid catalyst is fabricated with an HER overpotential of -140 mV at 10 mA cm(-2), a Tafel slope of 40 mV dec(-1), and long stability. These results demonstrate the importance of interfacial design in transition metal dichalcogenide HER catalysts. The microreactor platform presents an unambiguous approach to probe interfacial effects in various electrocatalytic reactions.
  •  
24.
  • Howe, Andrew, 1995- (författare)
  • Immobilisation of Ru-Based Molecular Catalysts for Electrochemical Water Oxidation
  • 2022
  • Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
    • Artificial photosynthesis requires catalysts for efficient and selective conversions of small molecules. Molecular catalysts are advantageous to use in these instances as they offer precise control over chemical reactivity. They are synthetically tuneable, and their catalytic mechanisms are often well documented and more readily understood than those of solid-state catalysts. In this thesis, the synthetic incorporation of molecular catalysts into heterogenised molecular anodes for water oxidation are evaluated. The catalysts are incorporated as structural linkers into porous metal-organic framework (MOF) structures, and as coordination oligomers stacked onto graphitic surfaces. The preparation of MOF/molecular catalyst hybrid materials of two topologies, UiO (UiO = Universitet i Oslo) and NU-1000 (NU = Northwestern University), were investigated. Multiple synthetic methods for the incorporation of molecular ruthenium-based catalysts into MOFs were examined in papers I and II. In paper III of this thesis, a Ru-bda type molecular complex was successfully used in the solvothermal synthesis of a new MOF. The resulting material is the first of its kind that is built exclusively from molecular water oxidation catalyst linkers. It is shown that MOF incorporation greatly enhances the structural stability of the catalyst linker in chemical water oxidation experiments, giving rise to higher turnover numbers compared to that of a homogenous reference system. Finally, paper IV describes a stable and inert molecular ruthenium complex, which possesses a flexible adaptative multidentate equatorial (FAME) type equatorial ligand with a carbanion on the equatorial ligand that forms a C-Ru bond. This molecular complex is studied in homogeneous phase, and subsequently incorporated into a coordination oligomer, which can be activated for water oxidation catalysis. This finding broadens the field of molecular catalysis significantly, and proves that supramolecular interactions can be used to promote electrocatalysis in complexes which are otherwise too inert and stable to engage in electrocatalytic reactions. 
  •  
25.
  • Kersti, Hermansson, et al. (författare)
  • The vibrating hydroxide ion in water
  • 2011
  • Ingår i: Chemical Physics Letters. - : Elsevier BV. - 0009-2614 .- 1873-4448. ; 514:1-3, s. 1-15
  • Tidskriftsartikel (refereegranskat)abstract
    • The OH− ion in water is studied using a CPMD/BLYP + QMelectronic + QMvibrational approach. The ion resides in a cage of water molecules, which are H-bonded among each other, and pinned by H-bonding to the ion’s O atom. The water network keeps the ‘on-top’ water in place, despite the fact that this particular ion-water pair interaction is non-binding. The calculated OH− vibrational peak maximum is at ∼3645 cm−1 (experiment ∼3625 cm−1) and the shift with respect to the gas-phase is ∼ +90 cm−1 (experiment +70 cm−1). The waters molecules on each side of the ion (O and H) induce a substantial OH− vibrational blueshift, but the net effect is much smaller than the sum. A parabolic ‘frequency-field’ relation qualitatively explains this non-additivity. The calculated ‘in-liquid’ ν(OH−) anharmonicity is 85 cm−1.
  •  
26.
  • Bagnall, Andrew J. (författare)
  • Novel electrode and photoelectrode materials for hydrogen production based on molecular catalysts
  • 2022
  • Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
    • The PhD project focussed on the application of a cobalt tetraazamacrocyclic complex, in the literature commonly referred to as [Co(CR)Cl2]+ as a molecular catalyst for the hydrogen evolution reaction (HER). This was within the broader scope of the EU MSCA H2020 ITN ‘eSCALED’ project, which primarily aimed to create artificial leaf devices for the storage of solar energy in chemical fuels and, as part of this, sought the development of novel bio-inspired and scalable materials. This included researching molecular catalysts without platinum group metals (PGMs) currently relied upon in commercial technology.Three main projects were pursued: firstly, studies of the mechanism of the catalyst itself under organic electrocatalytic conditions. Catalytic intermediates were generated and identified using spectroscopy (UV-vis, NMR, EPR) and the catalytic behaviour was followed with electrochemical techniques. An ECEC mechanism with a rate-determining second protonation step associated with the release of H2 was identified, noting in particular an initial protonation step on the macrocycle at the Co(II) state that was hypothesised to involve the macrocycle amine group acting as a proton relay under the investigated conditions.Secondly, a new synthetic strategy towards novel derivatives of [Co(CR)Cl2]+ was developed to prepare a derivative for anchoring onto sp2-carbon surfaces by pi-stacking interactions. The immobilised catalyst was studied by electrochemical methods and compared with another derivative from collaborators at ICIQ, showing that both derivatives work as heterogenised electrocatalysts for the HER with high faradaic efficiencies and good stability over one hour at pH 2 and especially pH 7, but one derivative displays higher current densities and stability, invoking some consideration of rational design principles for modifying molecular catalysts.Thirdly, studies of a photocatalytic system made up of copper indium sulfide quantum dots (CuInS2 QDs) as a photosensitiser with either [Co(CR)Cl2]+ or its benzoic acid-functionalised derivative were carried out in ascorbate buffer, focussing on the photocatalytic performance and electron transfer (ET) processes between the CuInS2 QDs and the catalyst to explain the remarkable activity and robustness reported for closely related systems. CuInS2 QDs modified to have a ‘hybrid-passivation’ ligand system for compatibility with NiO films were used. Rapid QD-catalyst ET processes were noted for both catalysts. A static binding model with a strong binding equilibrium was adapted for the system,  applying a Poisson distribution. This prompts a reconsideration of the importance of anchoring groups for QD-catalyst ET efficiency in solution.
  •  
27.
  • Luong, N. Tan, 1995- (författare)
  • Water film-mediated mineralogical transformations and photocatalytic reactions
  • 2023
  • Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
    • Mineral particles capture water vapor in the atmosphere in the form of water films that are only few monolayers thick. Water films form nanoscale hydration environments that mediate a wide range of important reactions in nature and technology. This thesis explored two important phenomena that commonly occur within the confines of water films: mineralogical transformations (Topic 1) and photocatalytic decomposition of organics (Topic 2). These transformations were chiefly identified by vibrational spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy and (Transmission and Scanning) electron microscopy. Interpretations of reaction mechanisms were partially supported by chemometrics, kinetic and thermodynamic modeling, as well as molecular simulations.Mineralogical transformations (Topic 1) resolved in this thesis involved the hydroxylation (Papers I, II) and carbonation (Paper III) of periclase (MgO), and the oxidation of rhodochrosite (MnCO3) (Paper IV). Two types of MgO nanocubes with contrasting physical properties were used to resolve nucleation- and diffusion-limited hydroxylation reactions to brucite and carbonation reactions to amorphous magnesium carbonate (AMC). While nucleation-limited reactions completely transformed (8 nm) small and aggregated MgO nanocubes to brucite, the reactions became diffusion-limited in larger (32 nm) monodispersed MgO nanocubes because of brucite surface nanocoatings (Paper I). Additionally, brucite nanosheets grew under (GPa-level) crystallization pressures because of the important volumetric expansion of the reaction, which took place in a complex network of microporosity between the small and within the larger MgO nanocubes. Brucite stacking mechanisms, explored in Paper II, focused on the early stages of MgO-water interaction in water films of different thicknesses. These were suggested to involve the stacking and (epitaxial-like) growth of precursor Mg(OH)2 nanosheets in water films. Carbonation reactions explored in Paper III completely hampered hydroxylation reactions studied in Papers I and II, and produced AMC nanocoatings grown over an unreacted MgO core. Finally, oxidation-driven reactions involving rhodochrosite in Paper IV produced MnO2, Mn3O4, and MnOOH nanocoatings with growth rates being scaled with water loadings.Photocatalytic decomposition reactions of organics (Topic 2) were focused on the case of oxalate bound to TiO2 nanoparticles (Paper V). Photodecomposition rates scaled with humidity in oxygenated water films, and were explained by the combination of hole transfer (HT), ligand-to-metal charge transfer (LMCT), and the formation of hydroxyl radicals and reactive oxygen species. Decreasing rates in oxygen-free water films were, on the other hand, explained by water-driven charge localization, which eventually limited radical production and charge transfers via HT and LMCT. The reactions involved limited HT and LMCT processes which also competed with a charge recombination process across all humidity ranges.This thesis provides new insight into two key types of transformations mediated by water films on minerals. This knowledge can be used to understand the reactivity of mineral (nano)particles exposed to variations in atmospheric humidity and oxygen content, which are both highly relevant to a wide range of settings in nature and technology. It can also advance new ideas in the study of mineral growth, especially within the confines of nanometer-thick water films.
  •  
28.
  • Rzepka, Przemyslaw, et al. (författare)
  • Site-Specific Adsorption of CO2 in Zeolite NaK‑A
  • 2018
  • Ingår i: The Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 122:47, s. 27005-27015
  • Tidskriftsartikel (refereegranskat)abstract
    • Zeolite |Na12|-A is a commercial adsorbent, and its CO2-over-N2(CH4) selectivity can be further enhanced kinetically by replacing Na+ in the 8-ring windows that control gas diffusion with large cations. In this study, samples of zeolite |Na12–xKx|-A with x = 0.0, 0.8, 2.0, and 3.0 were prepared, and the positions of adsorbed CO2 molecules were determined using in situ neutron powder diffraction through profile refinement. Adsorbed CO2 molecules were located at three different sites within the large α-cavities in the zeolite structure, revealing the interaction between the adsorbed CO2 and the host framework. The number of CO2 molecules at each site depends on CO2 pressure and follows site-specific CO2 isotherms described with a Langmuir model. Most of the CO2 molecules in zeolite |Na12–xKx|-A bridge two cations at neighboring 8-ring sites. These are relatively weakly physisorbed, and therefore, most of the working capacity of CO2 adsorption is related to this site. The CO2 molecules at the second most populated site are coordinated to a cation in the 8-ring plane. Some of them seemed to form chemical bonds with the O atoms of the framework as carbonate-like species and acted as chemisorption. The remaining minor fraction of CO2 is directly attracted by Na+ at the 6-rings. The different positioning of physisorbed CO2 and the presence of chemisorbed CO2 was confirmed by in situ infrared spectroscopy.
  •  
29.
  • Wang, Yan, 1987- (författare)
  • Exploring Biopolymer-Clay Nanocomposite Materials by Molecular Modelling
  • 2015
  • Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
    • In this thesis, bio-nanocomposites made from two alternative biopolymers and montmorillonite (Mnt) clay have been investigated by molecular modelling. These biopolymers are xyloglucan (XG) and chitosan (CHS), both of which are abundant, renewable, and cost-effective. After being reinforced by Mnt clay nanoparticles, the polymer nanocomposites gains in multifunctionality and in the possibility to register unique combinations of properties, like mechanical, biodegradable, electrical, thermal and gas barrier properties. I apply molecular dynamics (MD) simulations to study the interfacial mechanisms of the adhesion of these biopolymers to the Mnt nanoplatelets at an atomic level.For the XG-Mnt system, a strong binding affinity of XG to a fully hydrated Mnt interface was demonstrated. It was concluded that the dominant driving force for the interfacing is the enthalpy, i.e. the potential energy of the XG-Mnt interacting system. The adsorbed XG favors a flat conformation with a galactose residue in its side chain that facilitates the adsorption of the polymer to the nanoclay. The XG adsorption was found do depend strongly on the hydration ability of counterions. The binding affinity of XG to Mnt was found to be strongest in the K-Mnt/XG system, followed by, in decreasing order, Na-Mnt/XG, Li-Mnt/XG, and Ca-Mnt/XG. The competing mechanism between ions, water and the XG in the interlayer region was shown to play an important role.The dimensional stability upon moisture exposure, i.e. the ability of a material to resist swelling, is an important parameter for biopolymer-clay nanocomposites. While pure clay swells significantly even at low hydration levels, it is here shown that for the XG-Mnt system, at a hydration level below 50%, the inter-lamellar spacing is well preserved, suggesting a stable material performance. However, at higher hydration levels, the XG-Mnt composite was found to exhibit swelling at the same rate as the pure hydrated Mnt clay.For the CHS-Mnt system, the significant electrostatic interactions from the direct charge-charge attraction between the polymer and the Mnt clay play a key role in the composite formation. Varying the degree of acetylation (DA) and the degree of protonation (DPr) resulted in different effects on the polymer-clay interaction. For the heavily acetylated CHS (DA > 50%, also known as chitin), the strong adhesion of the neutral chitin to the Mnt clay was attributed to strong correlation between the acetyl functional groups and the counterions which act as an electrostatic “glue”. Similarly, the poor adhesion of the fully deprotonated (DPr = 0%) neutral CHS to the clay is attributed to a weak correlation between the amino functional group and the counterions.The stress-strain behavior of the CHS-Mnt composite shows that the mechanical properties are highly affected by the volume fraction of the Mnt clay and the degree of exfoliation of the composite. The material structure has a close relationship to the material properties.Biopolymer-clay nanocomposites hold a bright future to replace petroleum-derived polymer plastics and will become widely used in common life. The theme of the thesis is that further critical improvements of these materials can be accomplished by development of the experimental methods in conjunction with increased understanding of the interactions between polymer, clay, water, ions, solutions in the polymer-clay mixtures provided by molecular modelling. 
  •  
30.
  • Wang, Yan, 1987-, et al. (författare)
  • Hydration and dimensional stability of the intercalated galleries in xyloglucan/montmorillonite nanocomposites studied by molecular dynamics simulations
  • Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
    • The outstanding properties of biological composite nacre materials have for a long time inspired research and development of man-made bionanocomposites. One of the most recent nacre-mimetic bionanocomposites comprising xygloglucan (XG) and montmorillonite (Mnt) clay has been investigated by related model systems through Molecular dynamics (MD) simulations. The expansion of the inter-gallery of the XG-Mnt composites when exposed to water, has been found to be a key issue for the material property. In order to shed light on the mechanism for this swelling behavior we have investigated the relation between the hydration and the dimensional stability of the inter-gallery in XG-Mnt composites, exploring also the role of the dynamic state of the polymer XG for the dimensional change. We find that at a hydration level below 50%, XG-Mnt possesses good dimensional stability, suggesting a constant performance of the material, while at a hydration level of 75%, the expansion ratio of the composite is found to be slightly smaller than the swelling of Mnt clay. At the four-layer hydrate formation with a hydration level of 100%, the swelling ratios of clay and the2composite reach the same value, suggesting a critical point of losing dimensional stability. We conclude that the strong adhesion between the polymer XG and the Mnt clay is the main driving force for the preservation of the stability at lower hydration conditions, while the dynamics of the XG polymer is related to the losing of dimensional stability for the composite at higher hydration levels. The ramification of these results in terms of moisture sensitivity of the material is briefly discussed.
  •  
31.
  • Wang, Yan, 1987-, et al. (författare)
  • Molecular mechanisms for the adhesion of chitin and chitosan to montmorillonite clay
  • Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
    • Molecular dynamics simulations have been performed to investigate molecular adhesion of chitin and chitosan oligomers to montmorillonite (Mnt) clay at different degrees of acetylation (DA, 0%, 20%, 40%, 60%, 80% and 100%) and different degree of protonation (DPr, 0%, 50%, 100% mimicking pH > 6.5, pH = 6.5, pH < 4, respectively) under fully hydrated conditions. Although the Mnt surface is negatively charged and a variation in DA also implies going from a positively charged oligomer at DA = 0% to a neutral oligomer at DA = 100%, the simulations show unexpectedly variation of the total molecular adhesion as a function of DA. From our analysis we propose that this quantitatively similar adhesion arise from two different mechanisms. At low DA, the oligomer is rich in positively charged amino groups interacting strongly with the negatively charged surface by direct electrostatic interaction. On the other hand, at high DA, electrically neutral acetyl groups are strongly correlated with the Na+ counter ions, which are in all cases stuck at the surface and the counter ions seem to act as ‘glue’ between the acetyl groups and the Mnt. However, when protonation was decreased, adhesion was significantly lowered. The reason is conclued by differences in charge distributions of the respective functional groups. A further investigation on the intramolecular hydrogen bonds formed in CHT or CHS shows that the adsorbed conformation of the polymer is also highly affected by DA. This work provides fundamental insights into adhesion mechanisms and is, of potential importance for the development of polymer-clay based composite materials.
  •  
32.
  • Wang, Yan, 1987- (författare)
  • Stress-strain behavior in chitosan-montmorillonite nanocomposites studied by molecular dynamics simulations
  • Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
    • We have performed molecular dynamics (MD) simulations to study the mechanical properties of bionanocomposites composed of chitosan (CHS) and montmorillonite (Mnt) clay. The stress-strain behavior and the Young’s modulus are calculated to estimate the mechanical properties of the material. Our results show that the mechanical properties of the CHS-Mnt composites are determined by many factors. The volume fraction and the degree of exfoliation of the clay platelets play the key roles. Meanwhile, the molecular adhesion between the polymer CHS and the Mnt at the wet interface is also a main factor. The stress-strain curve of the partially exfoliated CHS-Mnt composite shows significantly larger stiffness than the fully exfoliated one due to the volume fraction of clay is higher in the former case. The stiffness is slightly improved by adding more polymer in the fully exfoliated complex. We conclude that a higher volume faction of the Mnt is an essential premise to fabricate a high-performance composite material. The composite material structure has been found highly relevant to the mechanical properties. In addition, a strong molecular adhesion between the polymer and the clay would be of great importance for the mechanical properties in the composite material. The work provides insight into how to predict the mechanical properties in polymer-clay nanocomposites and may therefore be helpful for the design of bionanocomposite materials.
  •  
33.
  • Wiorek, Alexander (författare)
  • Solving Analytical Challenges with Thin Layer Electrochemistry
  • 2023
  • Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
    • The decentralization of chemical sensing to attain environmental-related information is today highly desirable to increase the knowledge on biological or geological events as well as effluents. The current state of the field moves toward submersible probes; chemical sensors implemented into submersible devices for quantifying analytes over extended times. However, many sensors are still not robust enough for such applications. Additionally, the detections of most analytes require reagent addition and other steps before analysis (i.e., pre-treatments). For such analyses to be implemented in decentralized measurements, it would be beneficial to find reagentless approaches to modify samples and avoid waste associated with the reagent addition. This thesis aimed to develop such strategies using different solid materials capable of imposing ion-transfer events (actuators) under electrochemical control, to achieve measuring the analytes in the same sample using chemical sensors. Both actuators and sensors were jointly employed in thin layer (or near thin layer) samples, inside newly designed 3D-printed cells. This allowed for small sample volumes (ca 100 µm thicknesses) down to 0.5 µL to be analyzed, and resulted in fast, non-diffusion limited measurements that facilitated the sensor-actuator concepts. First, acidification of thin layer samples using polyaniline (PANI) was investigated. By electrochemical oxidation of PANI, its molecular structure changed resulting in hydrogen ions (acid) being delivered to the thin layer sample within two minutes or less, shifting its pH from ca 8 down to 2–3. By combining PANI and pH-sensors, reliable detection of alkalinity in real and artificial water samples could be achieved for a period of two weeks and possibly more. Also, by combining the PANI-based acidification with planar optodes capable of measuring pH or CO2 with high spatial resolution, buffer capacity or dissolved inorganic carbon (DIC) gradients could be resolved in a 2D domain with sub-mm resolution. PANI-based acidification was tested for sensing several environmental samples, including freshwater plants, brackish water, seawater, and soil, presenting great versatility in analytical performance. Second, a concept of selective deionization of thin layer samples was developed. The importance of such a concept is related to the selectivity of ion-based measurements, where ions such as Li+ or NH4+ are difficult to detect in real samples because of interfering ions increasing their limit of detection (LOD). Non-faradic processes were explored to remove such interferents by using carbon nanotubes (CNTs) for modulating the ion transfer with the sample. To facilitate selective deionization to only remove one ion species, the CNTs were covered with ultra-thin ion-selective membranes (ISMs; ca 200 nm thick). The tandem of CNTs-ISM was found to be capable of selectively removing multiple different cations, proven with the monitoring from both potentiometric sensors and optodes additionally implemented into the thin layer sample. Overall, the CNTs-ISM tandem shows great promise for lowering the LOD of chemical sensors in complex matrixes such as biological or environmental samples, which could aid to decentralized measurements in the future.
  •  
34.
  • Howe, Andrew, 1995-, et al. (författare)
  • Synthesis of a Metal-Organic Framework Made Entirely of the Molecular Ruthenium Water Oxidation Complex
  • Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
    • A new type of metal-organic framework (MOF)  is described, with the linker moeities made entirely from Ru water oxidation catalyst with the formula  [(RuII(bda)(py(PhCOOH)2)], 1, (bda = [2,2′-bipyridine]-6,6′-dicarboxylate and; py(PhCOOH)2 = (4,4'-(pyridine-3,5-diyl)dibenzoic acid), that is based on the Ru-bda family of water oxidation catalysts has been prepared and characterised.   Due to its fixed equatorial ligand, with no features that can negatively influence the solvothermal synthesis, A MOF was preapred using 1 as the sole linker, producing a Zr-based framework, 2, that can be prepared in bulk or on a thin-film and characterised. The MOF formation was confirmed by powder X-ray diffraction (PXRD) and scanning electron microscopy (SEM), and Ru linker incorporation was shown by energy-dispersive X-ray (EDX) spectroscopies, X-ray photoelectron spectroscopy (XPS) and inductively coupled plasma optical emission spectroscopy (ICP-OES) analyses. Clear redox couples associated with 1 can be observed upon electrochemical characterisation using cyclic voltammetry (CV) and differential pulse voltammetry  (DPV). This provides an interesting study of the electrochemical behaviour of a  molecular water oxidation catalysts when it is an integral, structural component of a framework, which has found certain supramolecular, non-covalent, anionic and steric conditions need to be met in order to obtain effective catalysis when using Ru-bda type of catalyst.   
  •  
35.
  • Asfaw, Habtom Desta (författare)
  • Multifunctional Carbon Foams by Emulsion Templating : Synthesis, Microstructure, and 3D Li-ion Microbatteries
  • 2017
  • Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
    • Carbon foams are among the existing electrode designs proposed for use in 3D Li-ion microbatteries. For such electrodes to find applications in practical microbatteries, however, their void sizes, specific surface areas and pore volumes need be optimized. This thesis concerns the synthesis of highly porous carbon foams and their multifunctional applications in 3D microbatteries. The carbon foams are derived from polymers that are obtained by polymerizing high internal phase water-in-oil emulsions (HIPEs).In general, the carbonization of the sulfonated polymers yielded hierarchically porous structures with void sizes ranging from 2 to 35 µm and a BET specific surface area as high as 630 m2 g-1. Thermogravimetric and spectroscopic evidence indicated that the sulfonic acid groups, introduced during sulfonation, transformed above 250 oC to thioether (-C-S-) crosslinks which were responsible for the thermal stability and charring tendency of the polymer precursors. Depending on the preparation of the HIPEs, the specific surface areas and void-size distributions were observed to vary considerably. In addition, the pyrolysis temperature could also affect the microstructures, the degree of graphitization, and the surface chemistry of the carbon foams.Various potential applications were explored for the bespoke carbon foams. First, their use as freestanding active materials in 3D microbatteries was studied. The carbon foams obtained at 700 to 1500 oC suffered from significant irreversible capacity loss during the initial discharge. In an effort to alleviate this drawback, the pyrolysis temperature was raised to 2200 oC. The resulting carbon foams were observed to deliver high, stable areal capacities over several cycles. Secondly, the possibility of using these structures as 3D current collectors for various active materials was investigated in-depth. As a proof-of-concept demonstration, positive active materials like polyaniline and LiFePO4 were deposited on the 3D architectures by means of electrodeposition and sol-gel approach, respectively. In both cases, the composite electrodes exhibited reasonably high cyclability and rate performance at different current densities. The syntheses of niobium and molybdenum oxides and their potential application as electrodes in microbatteries were also studied. In such applications, the carbon foams served dual purposes as 3D scaffolds and as reducing reactants in the carbothermal reduction process. Finally, a facile method of coating carbon substrates with oxide nanosheets was developed. The approach involved the exfoliation of crystalline VO2 to prepare dispersions of hydrated V2O5, which were subsequently cast onto CNT paper to form oxide films of different thicknesses.
  •  
36.
  • Berastegui, Pedro, et al. (författare)
  • Electrochemical reactions of AgFeO2 as negative electrode in Li- and Na-ion batteries
  • 2018
  • Ingår i: Journal of Power Sources. - : Elsevier. - 0378-7753 .- 1873-2755. ; 401, s. 386-396
  • Tidskriftsartikel (refereegranskat)abstract
    • AgFeO2 nanoparticles synthesized via precipitation at room temperature are investigated in Li- and Na-ion cells through electrode coatings with an alginate binder. The electrochemical reactions of AgFeO2 with Li+ and Na+ions, as well as its role as alternative negative electrode in these cell systems are carefully evaluated. Initial Li uptake causes irreversible amorphization of the AgFeO2 structure with concomitant formation of Ag0 nanoparticles. Further Li incorporation results in conversion into Fe0 nanoparticles and Li2O, together with Li-alloying of these Ag0 clusters. Similar mechanisms are also found upon Na uptake, although such processes are hindered by overpotentials, the capacity and reversibility of the reactions with Na+ ions being not comparablewith those of their Li+ counterparts. The behaviour of AgFeO2 at low potentials vs. Li+/Li displays a synergic pseudo-capacitive charge storage overlapping Li-Ag alloying/de-alloying. This feature is exploited in full cells having deeply lithiated AgFeO2 and LiFePO4 as negative and positive electrodes, respectively. These environmentally friendly iron-based full cells exhibit attractive cycle performances with ≈80% capacity retention after 1000 cycles without any electrolyte additive, average round trip efficiency of ≈89% and operational voltage of 3.0 V combined with built-in pseudo-capacitive characteristics that enable high cycling rates up to≈25C.
  •  
37.
  • Younesi, Reza, et al. (författare)
  • Surface Characterization of the Carbon Cathode and the Lithium Anode of Li-O2 Batteries using LiClO4 or LiBOB salts
  • 2013
  • Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 5:4, s. 1333-1341
  • Tidskriftsartikel (refereegranskat)abstract
    • The surface compositions of a MnO2 catalyst containing carbon cathode and a Li anode in a Li–O2 battery were investigated using synchrotron-based photoelectron spectroscopy (PES). Electrolytes comprising LiClO4 or LiBOB salts in PC or EC:DEC (1:1) solvents were used for this study. Decomposition products from LiClO4 or LiBOB were observed on the cathode surface when using PC. However, no degradation of LiClO4 was detected when using EC/DEC. We have demonstrated that both PC and EC/DEC solvents decompose during the cell cycling to form carbonate and ether containing compounds on the surface of the carbon cathode. However, EC/DEC decomposed to a lesser degree compared to PC. PES revealed that a surface layer with a thickness of at least 1–2 nm remained on the MnO2 catalyst at the end of the charged state. It was shown that the detachment of Kynar binder influences the surface composition of both the carbon cathode and the Li anode of Li–O2 cells. The PES results indicated that in the charged state the SEI on the Li anode is composed of PEO, carboxylates, carbonates, and LiClO4 salt.
  •  
38.
  •  
39.
  • Bjerregaard, Joachim, 1996, et al. (författare)
  • Interpretation of H 2 -TPR from Cu-CHA Using First-Principles Calculations
  • 2024
  • Ingår i: Journal of Physical Chemistry C. - 1932-7447 .- 1932-7455. ; 128:11, s. 4525-4534
  • Tidskriftsartikel (refereegranskat)abstract
    • Temperature-programmed reduction and oxidation are used to obtain information on the presence and abundance of different species in complex catalytic materials. The interpretation of the temperature-programmed reaction profiles is, however, often challenging. One example is H2 temperature-programmed reduction (H2-TPR) of Cu-chabazite (Cu-CHA), which is a material used for ammonia assisted selective catalytic reduction of NOx (NH3-SCR). The TPR profiles of Cu-CHA consist generally of three main peaks. A peak at 220 °C is commonly assigned to ZCuOH, whereas peaks at 360 and 500 °C generally are assigned to Z2Cu, where Z represents an Al site. Here, we analyze H2-TPR over Cu-CHA by density functional theory calculations, microkinetic modeling, and TPR measurements of samples pretreated to have a dominant Cu species. We find that H2 can react with Cu ions in oxidation state +2, whereas adsorption on Cu ions in +1 is endothermic. Kinetic modeling of the TPR profiles suggests that the 220 °C peak can be assigned to Z2CuOCu and ZCuOH, whereas the peaks at higher temperatures can be assigned to paired Z2Cu and Z2CuHOOHCu species (360 °C) or paired Z2Cu and Z2CuOOCu (500 °C). The results are in good agreement with the experiments and facilitate the interpretation of future TPR experiments.
  •  
40.
  • Feng, Yingxin, 1994 (författare)
  • Reaction kinetics of NH3-SCR over Cu-CHA from first principles
  • 2024
  • Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
    • Ammonia-assisted selective catalytic reduction (NH3-SCR) is an advanced technology to reduce nitrogen oxide (NOx) emissions from lean-burn engines. NH3 is added to the exhaust gas and reacts selectively with NOx, forming N2 and H2O. Small-pore Cu-exchanged chabazite (Cu-CHA) is a widely used zeolite-based catalyst for NH3-SCR thanks to its high activity, high selectivity, and durability. However, one issue is the formation of small amounts of nitrous oxide (N2O), which is a strong greenhouse gas. Atomic level understanding is valuable to improve the performance of NH3-SCR catalyst and meet the increasingly stringent emission standards. The state of Cu-CHA during NH3-SCR reaction depends sensitively on the reaction temperature. At low temperatures, Cu-ions are solvated by NH3, forming Cu[(NH3)2]+ complexes, while framework-bound Cu dominates at high temperatures. Experimentally, a non-monotonic behavior in NO conversion is observed with increasing temperature, which reflects a change in the active site. In this thesis, NH3-SCR over Cu-CHA is investigated using density functional theory (DFT) calculations and kinetic simulations. In the low-temperature range (<250℃), a pair of Cu[(NH3)2]+ is required for O2 adsorption to form a Cu-peroxo complex, which is a key Cu-intermediate. The reaction intermediates HONO and H2NNO can be converted to N2 and H2O over Brønsted acid sites. H2NNO is found to be the origin of N2O formation when decomposing over Cu-peroxo species. At high-temperature (>350℃), the proposed reaction mechanism suggests that the reaction proceeds over single framework Cu sites and starts from the co-adsorption of O2 and NO. The main source of N2O formation at high temperatures is suggested to be ammonium nitrate decomposition. By combining the reaction mechanisms for high and low temperatures, the non-monotonic temperature-dependent reaction activity is successfully reproduced. The present work deepens the understanding of the reaction mechanism of NH3-SCR on Cu-CHA in a wide temperature range and provides theoretical support for further improvement of the catalyst performance.
  •  
41.
  • Fretz, Samuel Joseph, 1987 (författare)
  • Adding Utility to Carbon Materials: Introducing Dopants Using Highly Soluble Metal Salts and Functionalizing Surfaces via Bromomethylation
  • 2019
  • Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
    • Carbon-based materials have received intense research interest over the past few decades due to their unique  combination of properties including porosity, non-toxicity, chemical inertness, low density, and electrical conductivity, which has allowed them to find a wide array of applications including supercapacitors, batteries, CO2 capture, fuel cells, and catalysis. To expand their utility, a variety of techniques have been developed to enhance their reactivity and functionality. One such method is doping, wherein heteroatoms (i.e. non-carbon elements) are purposefully incorporated into the carbon structure with the goal of introducing new reactivity to the material. The first paper in this thesis focuses on using soluble Fe salts as dopants for iron/nitrogen-doped ordered mesoporous carbons (Fe-OMC). The anion was found to have a strong effect on the structure, Fe loading, and oxygen reduction reaction (ORR) activity of the Fe-OMC. High Fe loadings of above 3 wt% were obtained for one of the soluble salts, but their activity in polymer electrolyte membrane fuel cells (PEMFCs) did not increase appreciably compared to the standard chloride salt. Electron paramagnetic resonance (EPR) was used to gain insight into the structure and ORR activity of the various Fe species within each Fe-OMC. Another method for increasing the utility of carbon materials is grafting or surface functionalization, which consists of covalently attaching small, organic molecules to the carbon surface. In three papers of this thesis, we report a novel two-step method for the surface functionalization of high surface area carbon materials. The carbons are first subjected to the bromomethylation reaction then, in the second step, many nucleophiles can substitute bromide resulting in monolayer-functionalized surfaces that can be tailored for a specific application. Example nucleophiles include azide, amines, iodide, sulfite, and amide enolates. Several carbon materials efficiently and reproducibly undergo these reactions and the surface-bound groups are stable for months under ambient conditions. This two-step scheme has numerous advantages over other surface modification techniques for carbon including use of solution-phase reagents, minimal harm to the carbon framework, monolayer functionalization, and no carbon pretreatment steps. A total of 12 surface groups were synthesized, which demonstrates the synthetic flexibility of this two-step technique. Four of the twelve modified carbons were used as cathodes in lithium-sulfur (Li-S) batteries. When used with an electrolyte containing lithium nitrate (LiNO3), the functionalized cathodes show increased capacities by virtue of utilizing more S. When used with electrolytes lacking LiNO3, the surface groups attenuate the lithium polysulfide (LiPS) shuttle as measured by the much higher initial Coulombic efficiencies (ICEs) recorded for the functionalized cathodes relative to the unfunctionalized control. The observations with both electrolytes evidence strong interactions between the electroactive S and the surface groups. The higher binding energies (BEs) computed by density functional theory (DFT) support strong interactions between the surface groups and various sulfur species while cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) lend evidence for a significantly reduced LiPS shuttle on the functionalized carbon surfaces. Based on these results with Li-S batteries, we hope that this two-step method of introducing organic groups to carbon surfaces will find wide-spread use in many applications.
  •  
42.
  • Gejke, Cecilia, 1973, et al. (författare)
  • The effect of lithium insertion on the structure of tin oxide-based glasses
  • 2001
  • Ingår i: Journal of Power Sources. - 0378-7753. ; 97-98, s. 226-228.
  • Tidskriftsartikel (refereegranskat)abstract
    • Two different SnO-based glasses, Sn2B3O6.5 and Sn2B2AlO6.5, have been examd. with FT-IR and Raman spectroscopy at different stages during the first electrochemical cycle. Some disruption of the connection between borate units in the network occurred during cycling. There was also an irreversible formation of Li3BO3 that can be related to the large capacity loss.
  •  
43.
  • Gogoi, Neeha, et al. (författare)
  • Silyl-Functionalized Electrolyte Additives and Their Reactivitytoward Lewis Bases in Li-Ion Cells br
  • 2022
  • Ingår i: Chemistry of Materials. - : American Chemical Society (ACS). - 1520-5002 .- 0897-4756. ; 34:8, s. 3831-3838
  • Tidskriftsartikel (refereegranskat)abstract
    • Silyl groups are included in a wide range of electrolyteadditives to enhance the performance of state-of-the-art Li-ion batteries. Arecognized representative thereof is tris-(trimethylsilyl)phosphate(TMSPa) which, along with the similarly structured phosphite, has beenat the center of numerous electrolyte studies. Even though the silyl grouphas already been widely reported to be specifically reactive towardsfluorides, herein, a reactivity towards several Lewis bases typically found inLi-ion cells is postulated and investigated with the aim to establish a moresimplified and generally applicable reaction mechanism thereof. Bothgaseous and electrolyte soluble reactants and products are monitored bycombining nuclear magnetic resonance and injection cell-coupled massspectrometry. Experimental observations are supported by computationalmodels. The results clearly demonstrate that the silyl groups react withwater, hydroxide, and methoxide and thereby detach in a stepwise fashion from the central phosphate in TMSPa. Intermolecularinteraction between TMSPa and the reactants likely facilitates dissolution and lowers the free energy of reaction. Lewis bases are wellknown to trigger side reactions involving both the Li-ion electrode and electrolyte. By effectively scavenging these, the silyl group canbe explained to lower cell impedance and prolong the lifetime of modern Li-ion batteries.
  •  
44.
  • Karlsson, Mikael, 1978, et al. (författare)
  • Characterisation of silicon, zirconium and aluminium coated titanium dioxide pigments recovered from paint waste
  • 2019
  • Ingår i: Dyes and Pigments. - : Elsevier BV. - 0143-7208 .- 1873-3743. ; 162, s. 145-152
  • Tidskriftsartikel (refereegranskat)abstract
    • © 2018 Elsevier Ltd Titanium dioxide (TiO2) is the major white pigment used by the paint industry. However, the production of TiO2is associated with a high carbon footprint. An alternative source of pigment could be created by developing a method to recover it from waste paint. In this paper two rutile pigments with different surface treatments were recovered from paint by a thermal recycling process. The pigments were analysed using powder x-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), surface area measurements (BET), laser diffraction for particle size analysis and zeta potential measurements before and after the recycling process. It was concluded that the rutile cores of both pigments were intact and there were no major changes in particle size distribution or surface charge for either pigment induced by the recycling process. However, XPS and zeta potential measurements showed that the surface coating of the pigments can be more or less degraded depending on the chemical nature, which might imply the need for further re-coating after-treatment. Another option would be to find another application for the pigment where the quality and function of the coating is of less importance.
  •  
45.
  • Karlsson, Rasmus, 1987- (författare)
  • Theoretical and Experimental Studies of Electrode and Electrolyte Processes in Industrial Electrosynthesis
  • 2015
  • Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
    • Heterogeneous electrocatalysis is the usage of solid materials to decrease the amount of energy needed to produce chemicals using electricity. It is of core importance for modern life, as it enables production of chemicals, such as chlorine gas and sodium chlorate, needed for e.g. materials and pharmaceuticals production. Furthermore, as the need to make a transition to usage of renewable energy sources is growing, the importance for electrocatalysis used for electrolytic production of clean fuels, such as hydrogen, is rising. In this thesis, work aimed at understanding and improving electrocatalysts used for these purposes is presented.A main part of the work has been focused on the selectivity between chlorine gas, or sodium chlorate formation, and parasitic oxygen evolution. An activation of anode surface Ti cations by nearby Ru cations is suggested as a reason for the high chlorine selectivity of the “dimensionally stable anode” (DSA), the standard anode used in industrial chlorine and sodium chlorate production. Furthermore, theoretical methods have been used to screen for dopants that can be used to improve the activity and selectivity of DSA, and several promising candidates have been found. Moreover, the connection between the rate of chlorate formation and the rate of parasitic oxygen evolution, as well as the possible catalytic effects of electrolyte contaminants on parasitic oxygen evolution in the chlorate process, have been studied experimentally.Additionally, the properties of a Co-doped DSA have been studied, and it is found that the doping makes the electrode more active for hydrogen evolution. Finally, the hydrogen evolution reaction on both RuO2 and the noble-metal-free electrocatalyst material MoS2 has been studied using a combination of experimental and theoretically calculated X-ray photoelectron chemical shifts. In this way, insight into structural changes accompanying hydrogen evolution on these materials is obtained.
  •  
46.
  • Khokarale, Santosh G., et al. (författare)
  • Metal free synthesis of ethylene and propylene carbonate from alkylene halohydrin and CO2 at room temperature
  • 2019
  • Ingår i: RSC Advances. - : The Royal Society of Chemistry. - 2046-2069. ; 9:58, s. 34023-34031
  • Tidskriftsartikel (refereegranskat)abstract
    • Herein we describe a metal free and one-pot pathway for the synthesis of industrially important cyclic carbonates such as ethylene carbonate (EC) and propylene carbonates (PC) from molecular CO2 under mild reaction conditions. In the actual synthesis, the alkylene halohydrins such as alkylene chloro- or bromo or iodohydrin and organic superbase, 1,8-diazabicyclo-[5.4.0]-undec-7-ene (DBU) reacted equivalently with CO2 at room temperature. The syntheses of cyclic carbonates were performed in DMSO as a solvent. Both 1,2 and 1,3 halohydrin precursors were converted into cyclic carbonates except 2-bromo- and iodoethanol, which were reacted equivalently with DBU through n-alkylation and formed corresponding n-alkylated DBU salts instead of forming cyclic carbonates. NMR analysis was used to identify the reaction components in the reaction mixture whereas this technique was also helpful in terms of understanding the reaction mechanism of cyclic carbonate formation. The mechanistic study based on the NMR analysis studies confirmed that prior to the formation of cyclic carbonate, a switchable ionic liquid (SIL) formed in situ from alkylene chlorohydrin, DBU and CO2. As a representative study, the synthesis of cyclic carbonates from 1,2 chlorohydrins was demonstrated where the synthesis was carried out using chlorohydrin as a solvent as well as a reagent. In this case, alkylene chlorohydrin as a solvent not only replaced DMSO in the synthesis but also facilitated an efficient separation of the reaction components from the reaction mixture. The EC or PC, [DBUH][Cl] as well as an excess of the alkylene chlorhydrin were separated from each other following solvent extraction and distillation approaches. In this process, with the applied reaction conditions, >90% yields of EC and PC were achieved. Meanwhile, DBU was recovered from in situ formed [DBUH][Cl] by using NaCl saturated alkaline solution. Most importantly here, we developed a metal free, industrially feasible CO2 capture and utilization approach to obtain EC and PC under mild reaction conditions.
  •  
47.
  • Kosaraju, Sravya, 1983 (författare)
  • A review of the importance of recycling lithium-ion batteries for lithium, in view of impending electric vehicle industry
  • 2012
  • Rapport (övrigt vetenskapligt/konstnärligt)abstract
    • Automobile electrification is one the technological developments, that will commence an earth friendly transport system, by mitigating emissions and hopefully lead to a less fossil fuel dependent society. With commercial success attained by models like Nissan’s leaf and Chevy’s Volt, the consumer market looks promising to assimilate vehicle electrification. At present these technologies include HEVs (hybrid electric vehicles), PHEVs (plug-in hybrid electric vehicles), EVs (complete electric vehicles).A closer look at these technologies will lead us to one of the crucial components of electric vehicles, the “batteries”. This component decides one of the key performance factors which is the energy storage and usage, which means it is the basis for public acceptability.The lithium-ion battery chemistries are chosen to fulfill this requirement. Although lithium constitutes of a small fraction of the complete battery weight, still its contin-ued availability in future is debated among many resource analysts.
  •  
48.
  • Li, Xianchan, 1982, et al. (författare)
  • Nanopore Opening at Flat and Nanotip Conical Electrodes during Vesicle Impact Electrochemical Cytometry
  • 2018
  • Ingår i: ACS Nano. - : American Chemical Society (ACS). - 1936-0851 .- 1936-086X. ; 12:3, s. 3010-3019
  • Tidskriftsartikel (refereegranskat)abstract
    • The oxidation of catecholamine at a microelectrode, following its release from individual vesicles, allows interrogation of the content of single nanometer vesicles with vesicle impact electrochemical cytometry (VIEC). Previous to this development, there were no methods available to quantify the chemical load of single vesicles. However, accurate quantification of the content is hampered by uncertainty in the proportion of substituent molecules reaching the electrode surface (collection efficiency). In this work, we use quantitative modeling to calculate this collection efficiency. For all vesicles except those at the very edge of the electrode, modeling shows that ∼100% oxidation efficiency is achieved when employing a 33 μm diameter disk microelectrode for VIEC, independent of the location of the vesicle release pore. We use this to experimentally determine a precise distribution of catecholamine in individual vesicles extracted from PC12 cells. In contrast, we calculate that when a nanotip conical electrode (∼4 μm length, ∼1.5 μm diameter at the base) is employed, as in intracellular VIEC (IVIEC), the current-time response depends strongly on the position of the catecholamine-releasing pore in the vesicle membrane. When vesicle release occurs with the pore opening occurring far from the electrode, lower currents and partial oxidation (∼75%) of the catecholamine are predicted, as compared to higher currents and ∼100% oxidation, when the pore is close to/at the electrode surface. As close agreement is observed between the experimentally measured vesicular content in intracellular and extracted vesicles from the same cell line using nanotip and disk electrodes, respectively, we conclude that pores open at the electrode surface. Not only does this suggest that electroporation of the vesicle membrane is the primary driving force for catecholamine release from vesicles at polarized electrodes, but it also indicates that IVIEC with nanotip electrodes can directly assess vesicular content without correction. © 2018 American Chemical Society.
  •  
49.
  • Maurina Morais, Eduardo, 1989 (författare)
  • Exploring new protic ionic liquids: From synthesis to fundamental properties
  • 2023
  • Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
    • The ionic liquid community frequently leverages the selling point that more than a million new ionic liquids could conceivably be created. Nonetheless, the number of commercially available compounds is orders of magnitude lower. This highlights the fact that only a small number of all possible ionic liquids are actively being researched, a reality particularly noticeable in the niche field of protic ionic liquids. In such a scenario, research focusing on the development of even a small number of viable alternatives to the popular alkylammonium- and imidazolium-based cations could potentially have a big impact, by paving the way for the synthesis of new families of ionic liquids. However, for these new alternatives to be widely used by the community, they must be easy to synthesize and have desirable properties. In this thesis, I discuss the challenges that I have encountered and the lessons that I have learned while trying to explore the chemical space of protic ionic liquids. This exploration started with the development of a procedure for the synthesis of pure and dry protic ionic liquids, which was used to make new triazolium-based protic ionic liquids. Additionally, this first work highlights the importance of using air-free techniques to analyze these hygroscopic compounds. Later, these insights were used to develop a new setup for the determination of ionic conductivity in ionic liquids. The latter was used in conjunction with pulsed-field gradient nuclear magnetic resonance diffusion experiments and density functional theory experiments to understand the differences in transport properties between triazolium- and imidazolium-based protic ionic liquids. Finally, we once again turned our attention to the imidazolium cation and explored how simple modifications to its electronic structure, by means of functionalization with electron-withdrawing groups, can enhance its acidity, and how that affects the properties of these nitro- and cyano-functionalized protic ionic liquids. This thesis aims to highlight the importance of developing new methods for the synthesis and analysis of protic ionic liquids, as well as to explore how computational modeling can be used to rationalize the observed differences in the physicochemical properties of these compounds.
  •  
50.
  • Mousavinejad, Atiyeh, et al. (författare)
  • Nickel-Based Metal–Organic Frameworks to Improve the CO2/CH4 Separation Capability of Thin-Film Pebax Membranes
  • 2020
  • Ingår i: Industrial & Engineering Chemistry Research. - : American Chemical Society (ACS). - 0888-5885 .- 1520-5045. ; 59:28, s. 12834-12844
  • Tidskriftsartikel (refereegranskat)abstract
    • Incorporating metal–organic frameworks (MOFs) into the thin layer of thin-film composite (TFC) membranes is an effective way of improving the CO2/CH4 separation performance. In this study, porous polyethersulfone (PES) membranes were surface-coated with a novel CO2-permeable layer consisting of CO2-philic Pebax and nickel-based MOF particles. The MOF particles were synthesized using nickel(II) acetate tetrahydrate as a metal source and 2-amino-1,4-dicarboxybenzene (NH2-BDC) as an organic linker. The properties and performance of the MOFs and synthesized membranes were assessed using analytical techniques including differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), field-emission scanning electron microscopy (FE-SEM), and dynamic light scattering (DLS). DLS analysis showed that the MOF particle size range was in a range of 350–650 nm. Moreover, cross-sectional FE-SEM images depicted that a uniform and dense Pebax layer was shaped on top of the PES substrate. Well dispersion of the particles was demonstrated by surface FE-SEM imaging. DSC analysis showed that embedding Ni-NH2-BDC MOF particles into the Pebax-1657 film increased the crystallinity degree and the glass-transition temperature (Tg) of resulted membranes. To evaluate the membrane’s separation performance, permeation experiments were performed with CO2, CH4, and CO2/CH4 mixtures at ambient temperature. Embedding 5 wt % Ni-based MOF particles improved the CO2 permeability and CO2/CH4 selectivity from 19.05 Barrer and 32.2 to 31.55 Barrer and 94, respectively, compared to MOF-free membranes. Loading MOF particles into the Pebax matrix also improved the real gas separation factor. The obtained results demonstrate the great potential of the fabricated TFC membranes for gas separation.
  •  
Skapa referenser, mejla, bekava och länka
  • Resultat 1-50 av 6996
Typ av publikation
tidskriftsartikel (5442)
konferensbidrag (509)
doktorsavhandling (380)
annan publikation (206)
forskningsöversikt (206)
licentiatavhandling (138)
visa fler...
bokkapitel (67)
rapport (20)
patent (18)
bok (6)
samlingsverk (redaktörskap) (4)
konstnärligt arbete (3)
visa färre...
Typ av innehåll
refereegranskat (5913)
övrigt vetenskapligt/konstnärligt (1055)
populärvet., debatt m.m. (26)
Författare/redaktör
Younesi, Reza (135)
Brandell, Daniel, 19 ... (131)
Ahuja, Rajeev, 1965- (124)
Edström, Kristina, P ... (114)
Jannasch, Patric (98)
Edström, Kristina (97)
visa fler...
Johansson, Patrik, 1 ... (84)
Skoglundh, Magnus, 1 ... (79)
Kessler, Vadim (78)
Primetzhofer, Daniel (75)
Sun, Licheng, 1962- (75)
Hagfeldt, Anders (64)
Mindemark, Jonas (64)
Seisenbaeva, Gulaim (62)
Bergström, Lennart (61)
Liu, Johan, 1960 (60)
Müller, Christian, 1 ... (57)
Boschloo, Gerrit (56)
Brandell, Daniel (56)
Hultman, Lars (55)
Matic, Aleksandar, 1 ... (55)
Rensmo, Håkan (54)
Carlsson, Per-Anders ... (54)
Nyholm, Leif, 1961- (53)
Roth, Stephan V. (52)
Hedin, Niklas (51)
Hahlin, Maria (51)
Ågren, Hans (50)
Rosén, Johanna (47)
Wang, Ergang, 1981 (46)
Shen, Zhijian (44)
Wågberg, Thomas, 197 ... (43)
Muhammed, Mamoun (42)
Hryha, Eduard, 1980 (42)
Salazar-Alvarez, Ger ... (41)
Lundgren, Edvin (38)
Kullgren, Jolla, 197 ... (38)
Broqvist, Peter (38)
Liu, Xianjie (37)
Tai, Cheuk-Wai (37)
Nyborg, Lars, 1958 (37)
Kloo, Lars (36)
Valvo, Mario (35)
Eklund, Per (35)
Greczynski, Grzegorz (35)
Grönbeck, Henrik, 19 ... (34)
Palisaitis, Justinas (34)
Vomiero, Alberto (34)
Xiong, Shizhao, 1985 (34)
Svensson, Jan-Erik, ... (34)
visa färre...
Lärosäte
Uppsala universitet (2096)
Chalmers tekniska högskola (1807)
Kungliga Tekniska Högskolan (1222)
Linköpings universitet (824)
Stockholms universitet (667)
Lunds universitet (634)
visa fler...
Umeå universitet (275)
RISE (235)
Luleå tekniska universitet (225)
Sveriges Lantbruksuniversitet (156)
Göteborgs universitet (146)
Högskolan i Borås (73)
Karlstads universitet (65)
Linnéuniversitetet (58)
Mittuniversitetet (52)
Karolinska Institutet (44)
Malmö universitet (31)
Örebro universitet (13)
Högskolan i Halmstad (12)
Högskolan Väst (9)
Mälardalens universitet (8)
Jönköping University (7)
Högskolan i Gävle (5)
Högskolan Dalarna (5)
Högskolan i Skövde (4)
Riksantikvarieämbetet (2)
Naturhistoriska riksmuseet (2)
VTI - Statens väg- och transportforskningsinstitut (2)
Gymnastik- och idrottshögskolan (1)
Blekinge Tekniska Högskola (1)
IVL Svenska Miljöinstitutet (1)
visa färre...
Språk
Engelska (6971)
Svenska (15)
Kinesiska (2)
Tyska (1)
Franska (1)
Ryska (1)
visa fler...
Norska (1)
Italienska (1)
Finska (1)
Japanska (1)
Koreanska (1)
visa färre...
Forskningsämne (UKÄ/SCB)
Naturvetenskap (6996)
Teknik (1986)
Medicin och hälsovetenskap (97)
Lantbruksvetenskap (44)
Humaniora (13)
Samhällsvetenskap (8)

År

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy