1. |
- Åkerfeldt, Pia, et al.
(författare)
-
Electron backscatter diffraction characterization of fatigue crack growth in laser metal wire deposited Ti-6Al-4V
- 2018
-
Ingår i: Materials Characterization. - : Elsevier BV. - 1044-5803 .- 1873-4189. ; 135, s. 245-256
-
Tidskriftsartikel (refereegranskat)abstract
- By additive manufacturing (AM) there is a feasibility of producing near net shape components in basically one step from 3D CAD model to final product. The interest for AM is high and during the past decade a lot of research has been carried out in order to understand the influence from process parameters on the microstructure and furthermore on the mechanical properties. In the present study laser metal wire deposition of Ti-6Al-4V has been studied in detail with regard to its fatigue crack propagation characteristics. Two specimen orientations, parallel and perpendicular to the deposition direction, have been evaluated at room temperature and at 250 °C. No difference in the fatigue crack growth rate could be confirmed for the two specimen orientations. However, in the fractographic study it was observed that the tortuosity varied between certain regions on the fracture surface. The local crack path characteristic could be related to the alpha colony size and/or the crystallographic orientation. Moreover, large areas exhibiting similar crystallographic orientation were observed along the prior beta grain boundaries, which were attributed to the wide alpha colonies frequently observed along the prior beta grain boundaries. © 2017 Elsevier Inc.
|
|
2. |
|
|
3. |
- Åkerfeldt, Maria, 1982, et al.
(författare)
-
Textile piezoelectric sensors – melt spun bi-component poly(vinylidene fluoride) fibres with conductive cores and poly(3,4-ethylene dioxythiophene)-poly(styrene sulfonate) coating as the outer electrode
- 2014
-
Ingår i: Fashion and Textiles. - : Springer Science and Business Media LLC. - 2198-0802. ; 1:1
-
Tidskriftsartikel (refereegranskat)abstract
- The work presented here addresses the outer electroding of a fully textile piezoelectric strain sensor, consisting of bi-component fibre yarns of β-crystalline poly(vinylidene fluoride) (PVDF) sheath and conductive high density polyethylene (HDPE)/carbon black (CB) core as insertions in a woven textile, with conductive poly(3,4-ethylene dioxythiophene)-poly(styrene sulfonate) (PEDOT:PSS) coatings developed for textile applications. Two coatings, one with a polyurethane binder and one without, were compared for the application and evaluated as electrode material in piezoelectric testing, as well as tested for surface resistivity, tear strength, abrasion resistance and shear flexing. Both coatings served their function as the outer electrodes in the system and no difference in this regard was detected between them. Omission of the binder resulted in a surface resistivity one order of magnitude less, of 12.3 Ω/square, but the surface resistivity of these samples increased more upon abrasion than the samples coated with binder. The tear strength of the textile coated with binder decreased with one third compared to the uncoated substrate, whereas the tear strength of the coated textile without binder increased with the same amount. Surface resistivity measurements and scanning electron microscopy (SEM) images of the samples subjected to shear flexing showed that the coatings without the binder did not withstand this treatment, and that the samples with the binder managed this to a greater extent. In summary, both of the PEDOT:PSS coatings could be used as outer electrodes of the piezoelectric fibres, but inclusion of binder was found necessary for the durability of the coating.
|
|
4. |
- Dimitrios, Nikas, et al.
(författare)
-
Effect of annealing on microstructure in railway wheel steel
- 2022
-
Ingår i: 42Nd Riso International Symposium On Materials Science. - : Institute of Physics Publishing (IOPP). ; 1249
-
Konferensbidrag (refereegranskat)abstract
- Railway wheels are commonly made from medium carbon steels (similar to 0.55 wt.% C), heat treated to a near pearlitic microstructure with 5-10% pro-eutectoid ferrite. During the operation of freight trains, where block brakes are used, high thermal loads occur together with the high contact stresses, which combined can affect the mechanical properties of the material. In this study, the effects of annealing on local microstructure and mechanical properties in pearlitic railway wheel steel were investigated using electron microscopy and micro-hardness. It is found that after annealing at 650 degrees C, the room temperature hardness reduces about 25%, accompanied by significant spheroidization of cementite in the pearlitic colonies, though the size and the orientation gradients of the pearlitic colonies have not changed much. The relationship between the microstructural changes and the mechanical properties are discussed.
|
|
5. |
- Lindberg, Siv M, et al.
(författare)
-
A product semantic study of the influence of the sense of touch on the evaluation of wood-based materials
- 2013
-
Ingår i: Materials & design. - : Elsevier BV. - 0264-1275 .- 1873-4197 .- 0261-3069. ; 52, s. 300-307
-
Tidskriftsartikel (refereegranskat)abstract
- Based on product semantics, this study investigated how the tactile attributes of wood and wood-based composites are perceived and interpreted semantically. The wood-based samples included ash, birch, elm, oak, pine, OSB (oriented strand board), two wood pulp-reinforced polylactide composites, Comp A and B and one wood-fiber reinforced polypropene composite, Comp C. The subjects rated the samples by the descriptive words natural, exclusive, eco-. friendly, rough, inexpensive, reliable, warm, modern, snug and solid. The most significant differences between the samples were found for roughness and for the descriptors, reliable, natural and solid. A principal component analysis yielded three attributes based on the tactile perceptions: reliable, old-. fashioned and smooth. The solid wood pieces were perceived as natural and oak was perceived as being exclusive. The composite materials presented a greater variation in terms of perceived attributes than the wood specimens.
|
|
6. |
- Mahade, Satyapal, 1987-, et al.
(författare)
-
Incorporation of graphene nano platelets in suspension plasma sprayed alumina coatings for improved tribological properties
- 2021
-
Ingår i: Applied Surface Science. - : Elsevier BV. - 0169-4332 .- 1873-5584. ; 570
-
Tidskriftsartikel (refereegranskat)abstract
- Graphene possesses high fracture toughness and excellent lubrication properties, which can be exploited to enhance tribological performance of coating systems utilized to combat wear. In this work, suspension plasma spray (SPS) process was employed to deposit a composite, graphene nano-platelets (GNP) incorporated alumina coating. For comparison, monolithic alumina was also deposited utilizing identical spray conditions. The as-deposited coatings were characterized in detail for their microstructure, porosity content, hardness, fracture toughness and phase composition. Raman analysis of the as-deposited composite coating confirmed retention of GNP. The composite coating also showed good microstructural integrity, comparable porosity, higher fracture toughness and similar alumina phase composition as the monolithic alumina coating. The as-deposited coatings were subjected to dry sliding wear tests. The GNP incorporated composite coating showed lower CoF and lower specific wear rate than the pure alumina coating. Additionally, the counter surface also showed a lower wear rate in case of the composite coating. Post-wear analysis performed by SEM/EDS showed differences in the coating wear track and in the ball wear track of monolithic and composite coatings. Furthermore, Raman analysis in the wear track of composite coating confirmed the presence of GNP. The micro-indentation and wear test results indicate that the presence of GNP in the composite coating aided in improving fracture toughness, lowering CoF and specific wear rate compared to the monolithic coating. Results from this work demonstrated retention of GNP in an SPS processed coating, which can be further exploited to design superior wear-resistant coatings.
|
|
7. |
- Grolig, Jan Gustav, 1986
(författare)
-
Coated Ferritic Stainless Steels as Interconnects in Solid Oxide Fuel Cells - Material Development and Electrical Properties
- 2015
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Solid oxide fuel cells (SOFCs) are attracting increasing interest as devices with potentialuses in decentralized and clean electricity and heat production. Several challengeswith respect to materials have to be overcome to achieve efficiencies and life-spansthat are sufficient for long-term applications.An important element of an SOFC stack is the interconnect component, which connectstwo adjacent fuel cell elements. Interconnects, which are commonly composedof ferritic stainless steels, have to be corrosion-resistant, mechanically stable and costoptimized.This work aimed to investigate economic solutions for interconnect materials and tounderstand the underlying mechanisms of degradation and electrical conduction ofthese materials. Mainly two substrates, a commercially available steel (AISI 441) anda ferritic stainless steel that was optimized for an SOFC application (Sandvik SanergyHT) were combined with different barrier coatings and exposed to a cathode-sideatmosphere. A method was developed that allows for the electrical characterizationof promising material systems and model alloys, thereby facilitating a fundamentalunderstanding of the dominant electrical conduction processes linked to the oxidescales that grow on interconnects. The AISI 441 steel coated with reactive elementsand cobalt showed good corrosion and chromium evaporation profiles, while AISI 441coated with cerium and cobalt also had promising electrical properties. The SanergyHT steel was examined with coatings of copper and iron and copper and manganese,respectively. The corrosion and chromium evaporation profiles of Sanergy HT wereimproved by coating with copper and iron. The copper and iron-coated Sanergy HTshowed lower area specific resistance values than cobalt-coated Sanergy HT. Chromia,which is the main constituent of oxide scales, was synthesized using differentmethods. The electrical properties of chromia were found to be sensitive to not onlyimpurities, but also heat treatment. Finally the electrical properties of cobalt- andcobalt cerium-coated Sanergy HT steels were investigated. It was revealed that theaddition of cerium improved the conductivity of the interconnect by both slowingdown chromia growth and preventing the outward diffusion of iron into the spinel.
|
|
8. |
- Krakhmalev, Pavel, 1973-, et al.
(författare)
-
Microstructure, solidification texture, and thermal stability of 316 L stainless steel manufactured by laser powder bed fusion
- 2018
-
Ingår i: Metals. - : MDPI AG. - 2075-4701. ; 8:8, s. 1-18
-
Tidskriftsartikel (refereegranskat)abstract
- This article overviews the scientific results of the microstructural features observed in 316 L stainless steel manufactured by the laser powder bed fusion (LPBF) method obtained by the authors, and discusses the results with respect to the recently published literature. Microscopic features of the LPBF microstructure, i.e., epitaxial nucleation, cellular structure, microsegregation, porosity, competitive colony growth, and solidification texture, were experimentally studied by scanning and transmission electron microscopy, diffraction methods, and atom probe tomography. The influence of laser power and laser scanning speed on the microstructure was discussed in the perspective of governing the microstructure by controlling the process parameters. It was shown that the three-dimensional (3D) zig-zag solidification texture observed in the LPBF 316 L was related to the laser scanning strategy. The thermal stability of the microstructure was investigated under isothermal annealing conditions. It was shown that the cells formed at solidification started to disappear at about 800 °C, and that this process leads to a substantial decrease in hardness. Colony boundaries, nevertheless, were quite stable, and no significant grain growth was observed after heat treatment at 1050 °C. The observed experimental results are discussed with respect to the fundamental knowledge of the solidification processes, and compared with the existing literature data.
|
|
9. |
- Hosseini, Seyedehsan, 1994
(författare)
-
Additive-Driven Improvements in Interfacial Properties and Processing of TMP-Polymer Composites
- 2023
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Efforts to address environmental concerns have resulted in new regulations designed to plan the reduction of plastic and synthetic polymer usage, necessitating the search for sustainable natural alternatives with comparable cost-effectiveness and mechanical performance. Thermomechanical pulp (TMP) fibres are one of the most affordable natural fibres that have no chemical refining in production, production have a high yield of 90-98% and TMP fibres have been demonstrated to improve the mechanical characteristics (strength, stiffness and toughness) of wood-polymer composites (WPCs) compared to the pure polymer. The integration of TMP fibres with non-polar synthetic polymers remains a challenge due to surface polarity differences. This PhD thesis aims to ease the processing of TMP fibre composites through the incorporation of additives. The hypothesis posits that incorporating magnesium stearate (MgSt), molybdenum disulfide (MoS2) and alkyl ketene dimer (AKD) as additives in TMP composites will enhance interfacial properties, resulting in improved processability and flow behaviour at high temperatures. MoS2 is known for its interaction with lignin, which exists in TMP and MgSt is recognised for its ability to improve flow in pharmaceutical processing when combined with cellulose, also a component of TMP. AKD modifies the hydrophilic properties of lignocellulosic surfaces. The experimental work explores the effect of these additives on the properties of TMP composites of ethylene acrylic acid copolymer (EAA) and polypropylene (PP) matrices. The dynamic mechanical analysis (DMA) and mechanical analysis results reveal that MoS2 exhibits superior interaction with TMP fibres, yielding enhanced interfacial properties compared to MgSt in between EAA and TMP fibres. Rheological studies elucidate the transition from a fluid-like state to a network-like structure upon the incorporation of TMP into the PP matrix. The incorporation of AKD with C18 reduces the viscosity of TMP-PP composites and PP itself, and, as determined through theoretical Hansen solubility parameter (HSP) calculations, increases compatibility between cellulose in TMP fibres and PP. The addition of AKD influences both the colour (lighter) and shape (smoother surface) of the extrudate filaments in the TMP-PP composites, indicative of improved processing. In addition, frictional analysis demonstrates the reduction of the coefficient of friction (COF) between metal and TMP fibre by MgSt and AKD treatments.
|
|
10. |
- Goel, Sneha, 1993-, et al.
(författare)
-
Effect of post-treatments under hot isostatic pressure on microstructural characteristics of EBM-built Alloy 718
- 2019
-
Ingår i: Additive Manufacturing. - : Elsevier BV. - 2214-8604 .- 2214-7810. ; 28, s. 727-737
-
Tidskriftsartikel (refereegranskat)abstract
- Electron beam melting (EBM) has emerged as an important additive manufacturing technique. In this study, Alloy 718 produced by EBM was investigated in as-built and post-treated conditions for microstructural characteristics and hardness. The post-treatments investigated were hot isostatic pressing (HIP) and combined HIP + heat treatment (HIP + HT) carried out as a single cycle inside the HIP vessel. Both the post-treatments resulted in significant decrease in defects inevitably present in the as-built material. The columnar grain structure of the as-built material was found to be maintained after post-treatment, with some sporadic localized grain coarsening noted. Although HIP led to complete dissolution of δ and γ′′ phase, stable NbC and TiN (occasionally present) particles were observed in the post-treated specimens. Significant precipitation of γ′′ phase was observed after HIP + HT, which was attributed to the two-step aging heat treatment carried out during HIP + HT. The presence of γ′′ phase or otherwise was correlated to the hardness of the material. While the HIP treatment resulted in drop in hardness, HIP + HT led to ‘recovery’ of the hardness to values exceeding those exhibited by the as-built material.
|
|
11. |
- Goel, Sneha, 1993-, et al.
(författare)
-
The Effect of Location and Post-treatment on the Microstructure of EBM-Built Alloy 718
- 2018
-
Ingår i: Proceedings of the 9th International Symposium on Superalloy 718 & Derivatives. - Cham : Springer. - 2367-1696 .- 2367-1181. - 9783319894799 - 9783319894805 ; , s. 115-129
-
Konferensbidrag (refereegranskat)abstract
- Additive manufacturing (AM) of Ni-based superalloys such as Alloy 718 may obviate the need for difficult machining and welding operations associated with geometrically intricate parts, thus potentially expanding design possibilities and facilitating cost-effective manufacture of complex components. However, processing AM builds completely free from defects, which may impair mechanical properties such as fatigue and ductility, is challenging. Anisotropic properties, microstructural heterogeneities and local formation of undesired phases are additional concerns that have motivated post-treatment of AM builds. This work investigates the microstructural changes associated with post-treatment of Alloy 718 specimens produced by Electron Beam Melting (EBM) for as-built microstructures at 3 build heights: near base plate, in the middle of build and near the top of the build. Two different post-treatment conditions, hot isostatic pressing (HIP) alone and a combined HIP with solutionising and two-step aging were examined and compared to the results for the as-built condition. The influence of various post-treatments on minor phase distributions (δ, γ″, carbides), overall porosity, longitudinal grain widths and Vickers microhardness was considered. The HIP treatment led to significant reduction in overall porosity and dissolution of δ phase, which led to appreciable grain growth for both post-treatment conditions. The variation in hardness noted as a function of build height for the as-built specimens was eliminated after post-treatment. Overall, the hardness was found to decrease after HIP and increase after the full HIP, solutionising and aging treatment, which was attributed to dissolution of γ″ during HIP and its re-precipitation in subsequent heat treatment steps.
|
|
12. |
- Wärmefjord, Kristina, 1976, et al.
(författare)
-
Welding of non-nominal geometries : physical tests
- 2016
-
Ingår i: Procedia CIRP. - : Elsevier BV. - 2212-8271 .- 2212-8271. ; 43, s. 136-141
-
Tidskriftsartikel (refereegranskat)abstract
- The geometrical quality of a welded assembly is to some extent depending part positions before welding. Here, a design of experiment is set up in order to investigate this relation using physical tests in a controlled environment. Based on the experimental results it can be concluded that the influence of part position before welding is significant for geometrical deviation after welding. Furthermore, a working procedure for a completely virtual geometry assurance process for welded assemblies is outlined. In this process, part variations, assembly fixture variations and welding induced variations are important inputs when predicting the capability of the final assembly.
|
|
13. |
- Charles Murgau, Corinne, et al.
(författare)
-
Temperature and Microstructure Evolution in Gas Tungsten Arc Welding Wire Feed Additive Manufacturing of Ti-6Al-4V
- 2019
-
Ingår i: Materials. - : MDPI. - 1996-1944. ; 12:21
-
Tidskriftsartikel (refereegranskat)abstract
- In the present study, the gas tungsten arc welding wire feed additive manufacturing process is simulated and its final microstructure predicted by microstructural modelling, which is validated by microstructural characterization. The Finite Element Method is used to solve the temperature field and microstructural evolution during a gas tungsten arc welding wire feed additive manufacturing process. The microstructure of titanium alloy Ti-6Al-4V is computed based on the temperature evolution in a density-based approach and coupled to a model that predicts the thickness of the α lath morphology. The work presented herein includes the first coupling of the process simulation and microstructural modelling, which have been studied separately in previous work by the authors. In addition, the results from simulations are presented and validated with qualitative and quantitative microstructural analyses. The coupling of the process simulation and microstructural modeling indicate promising results, since the microstructural analysis shows good agreement with the predicted alpha lath size.
|
|
14. |
- Fargas, G., et al.
(författare)
-
Influence of cyclic thermal treatments on the oxidation behavior of Ti-6Al-2Sn-4Zr-2Mo alloy
- 2018
-
Ingår i: Materials Characterization. - : Elsevier BV. - 1044-5803 .- 1873-4189. ; 145, s. 218-224
-
Tidskriftsartikel (refereegranskat)abstract
- Ti-6Al-2Sn-4Zr-2Mo is one of the most common titanium alloys for aerospace industry. This alloy experiences oxidation phenomenon at elevated temperatures. In the present study, cyclic thermal treatments were performed in air at 500, 593 and 700 °C, up to 500 cycles, in order to determine the oxidation kinetics and to analyze the oxide scale and alpha-case formation. Moreover, results were compared to those achieved under isothermal conditions to elucidate differences between both thermal conditions. In this sense, metallographic techniques and X-ray diffraction, together with a detailed advanced characterization of the microstructure by Field Emission Scanning Electron Microscopy and Focus Ions Beam, were used to analyze surface oxidation evolution. Results pointed out that cyclic treatments induced a strong increase of the weight gain compared to isothermal treatments. The analysis of the oxide scale revealed the formation of not only rutile, as isothermal treatments, but also anatase. Thickness of the oxide scale was higher for cyclic conditions, while alpha case did not exceed values reached by isothermal treatments and even became lower at 500 °C.
|
|
15. |
- Maimaitiyili, Tuerdi, et al.
(författare)
-
Residual Lattice Strain and Phase Distribution in Ti-6Al-4V Produced by Electron Beam Melting
- 2019
-
Ingår i: Materials. - : MDPI. - 1996-1944. ; 12:4
-
Tidskriftsartikel (refereegranskat)abstract
- Residual stress/strain and microstructure used in additively manufactured material are strongly dependent on process parameter combination. With the aim to better understand and correlate process parameters used in electron beam melting (EBM) of Ti-6Al-4V with resulting phase distributions and residual stress/strains, extensive experimental work has been performed. A large number of polycrystalline Ti-6Al-4V specimens were produced with different optimized EBM process parameter combinations. These specimens were post-sequentially studied by using high-energy X-ray and neutron diffraction. In addition, visible light microscopy, scanning electron microscopy (SEM) and electron backscattered diffraction (EBSD) studies were performed and linked to the other findings. Results show that the influence of scan speed and offset focus on resulting residual strain in a fully dense sample was not significant. In contrast to some previous literature, a uniform α- and β-Ti phase distribution was found in all investigated specimens. Furthermore, no strong strain variations along the build direction with respect to the deposition were found. The magnitude of strain in α and β phase show some variations both in the build plane and along the build direction, which seemed to correlate with the size of the primary β grains. However, no relation was found between measured residual strains in α and β phase. Large primary β grains and texture appear to have a strong effect on X-ray based stress results with relatively small beam size, therefore it is suggested to use a large beam for representative bulk measurements and also to consider the prior β grain size in experimental planning, as well as for mathematical modelling.
|
|
16. |
- Neikter, Magnus, 1988-, et al.
(författare)
-
Alpha texture variations in additive manufactured Ti-6Al-4V investigated with neutron diffraction
- 2018
-
Ingår i: Additive Manufacturing. - : Elsevier. - 2214-8604 .- 2214-7810. ; 23, s. 225-234
-
Tidskriftsartikel (refereegranskat)abstract
- Variation of texture in Ti-6Al-4V samples produced by three different additive manufacturing (AM) processes has been studied by neutron time-of-flight (TOF) diffraction. The investigated AM processes were electron beam melting (EBM), selective laser melting (SLM) and laser metal wire deposition (LMwD). Additionally, for the LMwD material separate measurements were done on samples from the top and bottom pieces in order to detect potential texture variations between areas close to and distant from the supporting substrate in the manufacturing process. Electron backscattered diffraction (EBSD) was also performed on material parallel and perpendicular to the build direction to characterize the microstructure. Understanding the context of texture for AM processes is of significant relevance as texture can be linked to anisotropic mechanical behavior. It was found that LMwD had the strongest texture while the two powder bed fusion (PBF) processes EBM and SLM displayed comparatively weaker texture. The texture of EBM and SLM was of the same order of magnitude. These results correlate well with previous microstructural studies. Additionally, texture variations were found in the LMwD sample, where the part closest to the substrate featured stronger texture than the corresponding top part. The crystal direction of the α phase with the strongest texture component was [112¯3]. © 2018 Elsevier B.V.
|
|
17. |
- Gaska, Karolina, 1986, et al.
(författare)
-
Gas Barrier, Thermal, Mechanical and Rheological Properties of Highly Aligned Graphene-LDPE Nanocomposites
- 2017
-
Ingår i: Polymers. - : MDPI AG. - 2073-4360. ; 9:7, s. 294-
-
Tidskriftsartikel (refereegranskat)abstract
- This contribution reports on properties of low-density polyethylene-based composites filled with different amounts of graphene nanoplatelets. The studied samples were prepared in the form of films by means of the precoating technique and single screw melt-extrusion, which yields a highly ordered arrangement of graphene flakes and results in a strong anisotropy of composites morphology. The performed tests of gas permeability reveal a drastic decrease of this property with increasing filler content. A clear correlation is found between permeability and free volume fraction in the material, the latter evaluated by means of positron annihilation spectroscopy. A strong anisotropy of the thermal conductivity is also achieved and the thermal conductivity along the extrusion direction for samples filled with 7.5 wt % of GnP (graphene nanoplatelets) reached 2.2 W/m·K. At the same time, when measured through a plane, a slight decrease of thermal conductivity is found. The use of GnP filler leads also to improvements of mechanical properties. The increase of Young’s modulus and tensile strength are reached as the composites become more brittle.
|
|
18. |
- Hanning, Fabian, 1988, et al.
(författare)
-
Investigation of the Effect of Short Exposure in the Temperature Range of 750-950 degrees C on the Ductility of Haynes (R) 282 (R) by Advanced Microstructural Characterization
- 2019
-
Ingår i: Metals. - : MDPI. - 2075-4701. ; 9:12
-
Tidskriftsartikel (refereegranskat)abstract
- A Gleeble-based test method has been developed to study the change in the ductility signature of Haynes (R) 282 (R) during isothermal exposure from 5 s to 1800 s. A temperature range of 750 to 950 degrees C has been used to investigate the effect of age-hardening reactions. Microstructural constituents have been analyzed and quantified using scanning and transmission electron microscopy. Carbides present in the material are identified as primary MC-type TiC carbides, Mo-rich M6C secondary carbides, and Cr-rich M23C6 secondary carbides. Gamma prime (gamma’) precipitates are present in all the material conditions with particle sizes ranging from 2.5 nm to 58 nm. Isothermal exposure causes the growth of gamma’ and development of a grain boundary carbide network. A ductility minimum is observed at 800-850 degrees C. The fracture mode is found to be dependent on the stroke rate, where a transition toward intergranular fracture is observed for stroke rates below 0.055 mm/s. Intergranular fracture is characterized by microvoids present on grain facets, while ductility did not change during ongoing age-hardening reactions for intergranularly fractured Haynes (R) 282 (R).
|
|
19. |
- Shaikh, Abdul Shaafi, 1989, et al.
(författare)
-
On the effect of building platform material on laser-powder bed fusion of a Ni-base superalloy HAYNES® 282®
- 2023
-
Ingår i: European Journal of Materials. - : Informa UK Limited. - 2688-9277. ; 3:1
-
Tidskriftsartikel (refereegranskat)abstract
- Additive manufacturing (AM) by laser powder bed fusion (LPBF) involves melting of layers of powder onto a substrate, called a building platform. Due to cost or convenience considerations, building platform materials rarely match the LPBF material, especially for high temperature materials. To ensure tolerances in component geometries, AM components are often stress-relieved/heat-treated while still attached to the building platform. It is therefore important to understand the effect of dissimilar building platform materials on the properties of the built-up material. These effects may be particularly important for high performance materials such as Ni-base superalloys used for critical applications in the aerospace and energy industries. To investigate this effect, samples of a Ni-base superalloy HAYNES® 282® were built onto a carbon steel building platform in several configurations. The samples were removed from the building platform after heat treatment and subjected to detailed composition analysis and microstructural characterization to investigate the effect of the building platform material on the properties of the additively manufactured part. Room temperature and high temperature tensile testing were used to characterize the material. Results showed no risk of large-scale chemical composition change, or mechanical property degradation of built-up material from on-platform heat treatment.
|
|
20. |
- Vilardell, A. M., et al.
(författare)
-
B2-structured Fe3Al alloy manufactured by laser powder bed fusion : Processing, microstructure and mechanical performance
- 2023
-
Ingår i: Intermetallics (Barking). - : Elsevier. - 0966-9795 .- 1879-0216. ; 156
-
Tidskriftsartikel (refereegranskat)abstract
- Prealloyed Fe3Al was successfully manufactured by laser powder bed fusion. The best set of process parameters led to parts with a relative density of 99.5 %, a surface roughness, Sa, of 31.5 ± 5.6 μm and a hardness of 319 ± 14 HV0.1. Its microstructure as well as its mechanical properties at room and high temperatures were analyzed. The results of the chemical composition showed minor variations in aluminum content oscillating between 21 and 28 at.% along the melt pool. Additionally, elongated grains were observed to grow parallel to the building direction, as well as the development of a weak 001 texture along the building direction. The mechanical properties were influenced by the temperature. Compression tests showed a loss in strength with the increase in temperature, from a yield strength of 621 ± 40 MPa at room temperature to 89 ± 20 MPa at 650 °C. Reciprocating sliding wear tests showed that fragmentation of the intermetallic at room temperature occurs, whereas plastic deformation dominated at higher temperatures. For all temperatures, tribochemical wear was also present due to the oxidation of wear debris.
|
|
21. |
- Zhang, Yubin, et al.
(författare)
-
Stress relief during annealing of railway wheel steel characterized by synchrotron X-ray micro-diffraction
- 2022
-
Ingår i: 42nd Risø International Symposium on Materials Science. - : Institute of Physics Publishing (IOPP). ; 1249
-
Konferensbidrag (refereegranskat)abstract
- Railway wheels in service experience rolling contact fatigue loading, but also need to resist frictional heating on braking, yielding temperatures up to 500 degrees C. The combination of mechanical and thermal loads leads to changes in the mechanical properties of the material. The focus of this study is to investigate the effect of annealing on local microstructure and residual stresses in railway wheel pearlitic steel (medium carbon steels, similar to 0.55 wt.% C) using synchroton X-ray Laue micro-diffraction. It is found that the local residual stress releases to a large extent after annealing at 500 degrees C. The stress formation and relief mechanisms and their relationship to the local microstructure are discussed.
|
|
22. |
- Jacobsson, Jonny, et al.
(författare)
-
Weldability of superalloys alloy 718 and ATI® 718Plus™ : A study performed by Varestraint testing
- 2017
-
Ingår i: Materialprüfung (München). - : Walter de Gruyter GmbH. - 0025-5300 .- 2195-8572. ; 59:9, s. 769-773
-
Tidskriftsartikel (refereegranskat)abstract
- In this study, the old and well-known alloy 718 is compared with the newly developed ATI® 718Plus™ from the weldability point of view. This is done in order to gain new information that have not been documented and established yet among the high-temperature materials with high strength, oxidation resistance, thermal stability and sufficient weldability, yet. ATI® 718Plus™ shows a lower sensitivity to hot cracking than alloy 718 with approximately 10 mm total crack length (TCL) difference in Varestraint testing. In the solution-annealed condition at 982°C for 4.5 h followed by air cooling, the crack sensitivity is decreased as compared to the mill-annealed condition. Along the crack path and also ahead of the crack tip, γ-Laves eutectic is present in both alloys. The microhardness measurements showed similar hardness level of 250 HV in the weld metal of both alloys and even in the parent material of alloy 718. ATI® 718Plus™ parent metal had hardness of 380 HV and a small increase of less than 50 HV was observed for both studied alloys in the heat affected zone (HAZ). For the same grain size of ATI® 718Plus™ (8.3 μm) and alloy 718 (15.6 μm), the susceptibility to liquation cracking may increase with increasing grain size. With a small grain size, there is a possibility to accommodate more trace elements (B, S, P) due to the larger grain boundary area. The impurity elements were found in relatively small precipitates, typically borides (0.2 μm), phosphides (0.1 to 0.5 μm) and carbo-sulphides. The solidification sequence of alloy 718 and ATI® 718Plus™ is relatively similar, where the liquid starts to solidify as γ-phase followed by γ/MC reaction at about 1260 °C and then final γ/Laves eutectic reaction at around 1150 °C. Detailed knowledge about weldability of alloy 718 and ATI® 718Plus™ can be used for material selection.
|
|
23. |
- Cantatore, Valentina, 1986, et al.
(författare)
-
Towards multifunctional coating in the boron-doped graphene/copper system
- 2017
-
Ingår i: Carbon. - : Elsevier BV. - 0008-6223. ; 115, s. 375-379
-
Tidskriftsartikel (refereegranskat)abstract
- A route to achieve multi-functional graphene coating is explored. Chemical bonding between copper substrate and coating results if the graphene is a priori boron doped. After pair-wise binding of boron sites to the Cu(111) surface, co-existence of pseudo-gap property in the graphene subsystem and a metallic density of states in the Cu subsystem at the common Fermi energy emerges. Apparently a paradox is that the two subsystems preserve and even recover their individual integrities upon formation of surface chemical bonds. Sensor capabilities are inferred. Employing pyridine as test molecule, conditioned ability of a nucleophile to offer competitive dative bonding, with the sub-strate, for boron sites is demonstrated. It is shown to occur for the case of half coverage and for adsorption to boron atoms originally bound to the on-top site on Cu(111). The ability of complementary boron sites to compensate for loss of binding between on-top site and boron, resulting from said bonding to the incoming nucleophile, is emphasized. Multifunctional substrate-coating system for catalysis as well as enhanced sensitization is inferred.
|
|
24. |
|
|
25. |
- Angseryd, Jenny, 1979, et al.
(författare)
-
Nanostructure of a cubic BN cutting tool material
- 2015
-
Ingår i: International Journal of Refractory Metals and Hard Materials. - : Elsevier BV. - 0263-4368 .- 2213-3917. ; 49:1, s. 283-287
-
Tidskriftsartikel (refereegranskat)abstract
- Advanced microscopy techniques, laser assisted atom probe tomography and electron energy loss spectroscopy in transmission electron microscopy are used to investigate in detail the microstructure of a polycrystalline cubic boron nitride tool material. During sintering at high pressure superhard cubic boron nitride combines with hard ceramic Ti(C,N) to form a dense material. Diffusion in Ti(C,N) and reactions between Ti(C,N), cBN and additives result in the formation of several nitride, oxide and boride phases in a complex mixed microcrystalline and nano- crystalline microstructure.
|
|
26. |
- Edin, Emil, et al.
(författare)
-
Rapid method for comparative studies on stress relief heat treatment of additively manufactured 316L
- 2022
-
Ingår i: Materials Science & Engineering. - : Elsevier. - 0921-5093 .- 1873-4936. ; 847
-
Tidskriftsartikel (refereegranskat)abstract
- The additive manufacturing method laser powder bed fusion (L-PBF) is known to introduce large residual stresses in the built component. Optimization of process parameters and subsequent heat treatment is crucial to relieve these residual stresses. However, many of the available tools used to analyze these residual stresses are either prohibitively expensive, or too time consuming for initial prototyping stages.A qualitative method for rapid evaluation of the effectiveness of stress relief heat treatment of L-PBF manufactured 316L has been tested. Residual stress induced distortion has been measured with contact and non-contact methods to study the effect of different stress relief heat treatment temperatures (600 – 950 °C, fixed holding time: 1 h). Over the examined temperature interval, at which deformation was measured, distinct differences were observable at each temperature with both methods. Based on the distortion, shape stability was considered reached after subjecting the test geometry to a heat treatment temperature of 900 °C for 1 hour. Complementary mechanical testing and microstructural characterization were carried out to provide a more general understanding of the implications of each heat treatment temperature. Microstructural characterization revealed that complete dissolution of the cellular sub-grain features occurred at the same temperature as where the minimum magnitude of distortion was obtained.
|
|
27. |
- Forsgren, Lilian, 1990
(författare)
-
Processing and properties of thermoplastic composites containing cellulose nanocrystals or wood-based cellulose fibres
- 2020
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Cellulose nanocrystals (CNC) were surface modified with dialkylamines to increase the compatibility between the CNC and the polymeric matrix, and promising results were obtained, with a 300 % stiffness increase when the mixed dispersion was compression moulded on a laboratory scale. The manufacturing process was up-scaled using water-assisted mixing in a twin-screw extruder (TSE) followed by a second compounding step and injection moulding (IM). The composites were successfully produced using conventional melt-processing techniques but these did not show the same improvement in mechanical performance, probably due to the formation of CNC aggregates. There were indications of network formation when CNC was added, especially in the case of surface-modified CNC. Cellulose fibres and thermomechanical pulp were used as reinforcement in similar types of polymer matrices and the mixtures were similarly processed by TSE and IM. These materials were characterized with regard to appearance and durability. The discoloration of the composites due to excessive heat during processing did not significantly affect their mechanical properties, and the addition of the cellulose-based reinforcement to the polymer did not reduce its resistance to thermo-oxidative degradation compared to that of the pure matrix. In fact, the resistance to degradation was increased when lignin was present in the reinforcing element, showing a synergistic effect together with the added anti-oxidant. Superior properties were expected for the CNC composites compared to those of the larger cellulose fibre reinforcements, but in continuous production the stiffening effects were similar regardless of reinforcement type. These results confirm that the processing method and properties strongly affect the final properties of the composite.
|
|
28. |
|
|
29. |
- Jafari, Reza, et al.
(författare)
-
KCl-Induced High Temperature Corrosion Behavior of HVAF-Sprayed Ni-Based Coatings in Ambient Air
- 2018
-
Ingår i: Journal of thermal spray technology (Print). - : Springer Science and Business Media LLC. - 1059-9630 .- 1544-1016. ; 27:3, s. 500-511
-
Tidskriftsartikel (refereegranskat)abstract
- KCl-induced high temperature corrosion behavior of four HVAF-sprayed Ni-based coatings (Ni21Cr, Ni5Al, Ni21Cr7Al1Y, and Ni21Cr9Mo) under KCl deposit has been investigated in ambient air at 600°C up to 168h. The coatings were deposited onto 16Mo3 steel - a widely used boiler tube material.Uncoated substrate, 304L and Sanicro25 were used as reference materials in the test environment.SEM/EDS and XRD techniques were utilized to characterize the as-sprayed and exposed samples.The results showed that the small addition of KCl significantly accelerated degradation to the coatings. All coatings provided better corrosion resistance compared to the reference materials. The alumina-forming Ni5Al coating under KCl deposit was capable of forming a more protective oxide scale compared to the chromia-forming coatings as penetration of Cl through diffusion paths was hindered. Both active corrosion and chromate formation mechanisms were found to be responsible for Page 1 of 23ASM the corrosion damages. The corrosion resistance of the coatings based on the microstructure analysis and kinetics had the following ranking (from the best to worst): Ni5Al >Ni21Cr> Ni21Cr7Al1Y>Ni21Cr9Mo.
|
|
30. |
- Sadeghimeresht, Esmaeil, 1985-, et al.
(författare)
-
Chlorine-induced high temperature corrosion of HVAF-sprayed Ni-based alumina and chromia forming coatings
- 2018
-
Ingår i: Corrosion Science. - : Elsevier BV. - 0010-938X .- 1879-0496. ; 132:March, s. 170-184
-
Tidskriftsartikel (refereegranskat)abstract
- Chlorine-induced corrosion of HVAF-sprayed Ni21Cr and Ni5Al coatings was investigated in 5 vol.% O2 + 500vppm HCl + N2 with and without KCl at 600 °C up to 168 h. Both coatings were protective in the absence of KCl. With KCl, Ni21Cr degraded through a two-stage mechanism: 1) formation of K2CrO4 followed by diffusion of Cl− through the oxide grain boundaries to yield chlorine and a non-protective oxide, and 2) inward diffusion of chlorine though defects in the non-protective oxide, leading to breakaway oxidation. Cl−/Cl2 could not diffuse through the protective alumina scale formed on Ni5Al, hence the corrosion resistance increased.
|
|
31. |
- Hosseini, Seyedehsan, 1994, et al.
(författare)
-
Alkyl ketene dimer modification of thermomechanical pulp promotes processability with polypropylene
- 2024
-
Ingår i: Polymer Composites. - 1548-0569 .- 0272-8397. ; 45:1, s. 825-835
-
Tidskriftsartikel (refereegranskat)abstract
- Alkyl ketene dimers (AKDs) are known to efficiently react with cellulose with a dual polarity in their structure: a polar component and a nonpolar component. AKD of three different carbon chain lengths, 4, 10, and 16 carbons have been synthesized, and thermomechanical pulp (TMP) fibers were modified by them. The modification of TMP fibers with AKD resulted in an increased water contact angle, showing the presence of the AKDs on the TMP fibers and a new carbonyl peak in the IR spectra, suggesting modification of the TMP fibers with AKD groups. Calculating the Hansen solubility parameters of AKD and AKD conjugated to TMP in polypropylene (PP) indicates improved compatibility, especially of longer chain AKD and TMP AKD. The rheological studies of the composites showed that the AKD with the longest carbon chain decreases the melt viscosity of the PP-TMP-AKD composite, which combined with the shape and the color of the extruded composite filaments indicates improved flow properties and reduced stress build up during processing. The research findings demonstrate the ability of AKD to enhance the dispersibility and compatibility of natural fibers with PP.
|
|
32. |
- Koptyug, Andrey, 1956-, et al.
(författare)
-
Electron Beam Melting: from Shape Freedom to Materials Properties Control at Macro- and Microscale
- 2021
-
Ingår i: Proceedings of the THERMEC 2020, Graz, Austria. - : Trans Tech Publications. ; , s. 755-759
-
Konferensbidrag (refereegranskat)abstract
- Electron beam melting (EBM) is one of the constantly developing powder bed fusion (PBF) additive manufacturing technologies (AM) offering advanced control over the manufacturing process. Freedom of component shapes is one of the AM competitive advantages already used at industrial and semi- industrial scale. Development of the additive manufacturing today is targeting both widening of the available materials classes, and introducing new enabling modalities. Present research is related to the new possibilities in tailoring different material properties within additively manufactured components effectively adding “fourth dimension to the 3D-printing”. Specific examples are given in relation to the electron beam melting, but majority of the conclusions are valid for the laser-based PBF techniques as well. Through manipulating beam energy deposition it is possible to tailor quite different material properties selectively within each manufactured component, including effective material density as well as thermal, mechanical, electrical and acoustic properties. It is also possible to acquire by choice both metal-metal composite and completely alloyed material, when blends of precursor powder are used together with the beam energy manipulation.
|
|
33. |
- Vilardell, Anna M., et al.
(författare)
-
Cold spray as an emerging technology for biocompatible and antibacterial coatings : State of art
- 2015
-
Ingår i: Journal of Materials Science. - New York : Springer. - 0022-2461 .- 1573-4803. ; 50:13, s. 4441-4462
-
Forskningsöversikt (refereegranskat)abstract
- The use of coatings in biomaterials has been fundamental on the applicability of many medical devices and has helped improve mechanical properties such as wear and fatigue and biological properties such as biocompatibility and bioactivity of implant prosthesis, thus, in essence, ameliorating human quality life. The aim of the present paper is to give a review on cold spray (CS) coating systems that are emerging in orthopedics industry (internal fixation systems and prosthesis) as well as those for antibacterial purposes (in body and touch external surfaces). These studies are very new, the oldest dating from the half of last decade and most deal with the improvement of biocompatibility and bioactivity of hard tissue replacement; therefore, research on biocoatings is in constant development with the aim to produce implant surfaces that provide a balance between cell adhesion and low cytotoxicity, mechanical properties, and functionalization. CS offers many advantages over conventional high-temperature processes and seems to be able to become competitive in front of the low-temperature techniques. It is mainly cost effective, appropriate for oxygen-sensitive materials, and environmentally green. It basically involves the use of feedstock material in powder form, which is supersonically sprayed onto the appropriate substrate but without any melting as it occurs in conventional thermal spray processes. Biocompatible metallic materials and polymers have been successfully deposited by this method because it is based on the plasticity of the coating material; pure ceramic deposits, for example of hydroxyapatite, are still a challenge.
|
|
34. |
- Andersson, Joel Håkan, 1981, et al.
(författare)
-
Investigation of Homogenization and its Influence on the Repair Welding of Cast Allvac 718Plus
- 2010
-
Ingår i: Proceedings of The 7th International Symposium on Superalloy 718 and Derivatives, TMS (The Minerals, Metals and Materials Society). - Hoboken, NJ, USA : John Wiley & Sons, Inc.. - 9781617827709 ; 1, s. 439-454, s. 439-454
-
Konferensbidrag (refereegranskat)abstract
- Heat treatment experiments have been carried out to bring understanding to the efficacy of different temperatures and dwell times on the degree of homogenization of the cast Allvac 718Plus alloy which is prone to segregation mainly due to its high content of niobium. The effect of homogenization on weld repair was also examined. The homogenization heat treatment temperatures ranged from 1050°C to 1200°C with 1hr, 5 hrs and 10 hrs dwell times. The degree of homogenization was measured as the reduction of the amount of Laves phase by manual point counting in an optical microscope at high magnification. Longer range, interdendritic, patterns were established through line scan EDS analysis in SEM. It was found that short time (1hr) does not significantly reduce the amount of Laves phase whereas 5 hrs and 10hrs are much more efficient. Interdendritic homogenization does not occur to any measurable extent even at the highest temperature and longest dwell time (1200°C-10hrs) which was also reflected in bulk macro Vickers hardness tests.In the weld repair tests, one of the most homogenized material conditions (1125°C-5hrs +1200°C-10hrs) turned out to be the most prone to cracking while the number of weld cracks after a moderate homogenization heat treatment (1125°C-5hrs) was much smaller .
|
|
35. |
- Andersson, Joel, 1981-, et al.
(författare)
-
Hot Ductility Study of Haynes 282 Superalloy
- 2010
-
Ingår i: Superalloy 718 and Derivatives. - Hoboken, NJ, USA : The Minerals, Metals, and Materials Society. - 9780470943168 ; , s. 539-554, s. 539-554
-
Konferensbidrag (refereegranskat)
|
|
36. |
- Andersson, Joel, 1981-, et al.
(författare)
-
Metallurgical Response of Electron Beam Welded Allvac® 718Plus™
- 2011
-
Ingår i: Hot Cracking Phenomena in Welds III. - Berlin, Heidelberg : Springer Berlin/Heidelberg. - 9783642168635 ; , s. 415-428, s. 415-428
-
Konferensbidrag (refereegranskat)abstract
- Electron beam welding of forged Allvac 718Plus superalloy has been carried out without any visible cracks in weld cross-sections. Healed cracks in the heat affected zone were, however, seen in most cross-sections with the healing as well as the cracking believed to be due to the constitutional liquation of the δ-phase. The δ-phase undergoes constitutional liquation in the Heat Affected Zone (HAZ) and consequently decreases the ductility of the material and renders cracks in the HAZ but due to the large amount of eutectic liquid produced at the same time the healing of the opened cracks takes place.
|
|
37. |
|
|
38. |
- Cruz-Crespo, Amado, et al.
(författare)
-
Flux for Hardfacing by Submerged Arc Welding from Ferrochrome-manganese and Slag from the Simultaneous Reduction of Chromite and Pyrolusite
- 2019
-
Ingår i: Soldagem & Inspeção. - 0104-9224 .- 1980-6973. ; 24
-
Tidskriftsartikel (refereegranskat)abstract
- The obtaining of a flux for hardfacing by Submerged Arc Welding (SAW), using ferrochrome-manganese and slag obtained from the simultaneous carbothermal reduction of chromite and pyrolusite is addressed. The ferrochrome-manganese and the slag were obtained, conceiving that both products satisfy the requirements of the components (alloy system and matrix) of an agglomerated flux for hardfacing. The fusion-reduction process to obtain the alloy and the slag was carried out in a direct current electric arc furnace. The pouring was carried out into water to facilitate the separation and grinding of the cast products. An experimental flux was manufactured, using the obtained alloy and slag. Deposits were obtained by SAW, which were characterized in terms of: chemical composition, microstructure and hardness. It was concluded that the flux obtained from ferrochrome-manganese and slag from the simultaneous carbothermal reduction of chromite and pyrolusite, allows to deposit an appropriate metal for work under abrasion conditions, characterized by significant carbon and chromium contents and a martensitic microstructure predominantly, with hardness of 63 HRc.
|
|
39. |
- Draxler, Joar, et al.
(författare)
-
Modeling and simulation of weld solidification cracking part II : A model for estimation of grain boundary liquid pressure in a columnar dendritic microstructure
- 2019
-
Ingår i: Welding in the World. - : Springer Science and Business Media LLC. - 0043-2288 .- 1878-6669. ; 63:5, s. 1503-1519
-
Tidskriftsartikel (refereegranskat)abstract
- Several advanced alloy systems are susceptible to weld solidification cracking. One example is nickel-based superalloys, which are commonly used in critical applications such as aerospace engines and nuclear power plants. Weld solidification cracking is often expensive to repair, and if not repaired, can lead to catastrophic failure. This study, presented in three papers, presents an approach for simulating weld solidification cracking applicable to large-scale components. The results from finite element simulation of welding are post-processed and combined with models of metallurgy, as well as the behavior of the liquid film between the grain boundaries, in order to estimate the risk of crack initiation. The first paper in this study describes the crack criterion for crack initiation in a grain boundary liquid film. The second paper describes the model for computing the pressure and the thickness of the grain boundary liquid film, which are required to evaluate the crack criterion in paper 1. The third and final paper describes the application of the model to Varestraint tests of Alloy 718. The derived model can fairly well predict crack locations, crack orientations, and crack widths for the Varestraint tests. The importance of liquid permeability and strain localization for the predicted crack susceptibility in Varestraint tests is shown. © 2019, The Author(s).
|
|
40. |
- Gruber, Hans, 1983, et al.
(författare)
-
Effect of Powder Recycling on the Fracture Behavior of Electron Beam Melted Alloy 718
- 2018
-
Ingår i: Powder Metallurgy Progress. - : de Gruyter. - 1335-8987 .- 1339-4533. ; 18:1, s. 40-48
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- Understanding the effect of powder feedstock alterations during multicycle additive manufacturing on the quality of built components is crucial to meet the requirements on critical parts for aerospace engine applications. In this study, powder recycling of Alloy 718 during electron beam melting was studied to understand its influence on fracture behavior of Charpy impact test bars. High resolution scanning electron microscopy was employed for fracture surface analysis on test bars produced from virgin and recycled powder. For all investigated samples, an intergranular type of fracture, initiated by non-metallic phases and bonding defects, was typically observed in the regions close to or within the contour zone. The fracture mode in the bulk of the samples was mainly moderately ductile dimple fracture. The results show a clear correlation between powder degradation during multi-cycle powder reuse and the amount of damage relevant defects observed on the fracture surfaces. In particular, samples produced from recycled powder show a significant amount of aluminum-rich oxide defects, originating from aluminum-rich oxide particulates on the surface of the recycled powder. © 2018 H. Gruber et al., published by Sciendo.
|
|
41. |
- Hanning, Fabian, et al.
(författare)
-
Measurement of the thermal cycle in the base metal heat affected zone of cast ATI ® 718Plus TM during manual multi-pass TIG welding
- 2018
-
Ingår i: Procedia Manufacturing. - : Elsevier BV. - 2351-9789. ; 25, s. 443-449
-
Tidskriftsartikel (refereegranskat)abstract
- This paper presents a method to acquire thermal data in the base metal heat affected zone (HAZ) during manual multi-pass TIG welding of ATI ® 718Plus TM , representing conditions close to an actual repair welding operation. Thermocouples were mounted in different locations along side walls of linear grooves to record temperature data. The thermal cycling was found to be largely independent of location within the HAZ. The recorded temperatures were below the incipient laves melting temperature, indicating that the current test setup requires optimisation to study HAZ liquation. Based on the results of this study, a modified thermocouple mounting technique is proposed. © 2018 Elsevier B.V. All rights reserved.
|
|
42. |
- Hanning, Fabian, 1988, et al.
(författare)
-
The Influence of Base Metal Microstructure on Weld Cracking in Manually GTA Repair Welded Cast ATI 718Plus®
- 2018
-
Ingår i: Proceedings of the 9th International Symposium on Superalloy 718 & Derivatives. - Cham : Springer International Publishing. - 2367-1696 .- 2367-1181. - 9783319894799 - 9783319894805 ; , s. 917-928
-
Konferensbidrag (refereegranskat)abstract
- The effect of base metal conditions on the weld cracking response of cast ATI 718Plus® was investigated in this study, comparing as cast microstructure with pseudo hot isostatic pressing (HIP) heat treatments at 1120, 1160 and 1190 °C for dwell times of 4 and 24 h. Linear grooves have been filled using multipass manual gas tungsten arc welding (GTAW) to simulate repair welding conditions. Metallographic investigation revealed cracks in both base metal heat affected zone and fusion zone layers. The heat treatment temperatures chosen below, at and above incipient laves melting temperature of ATI 718Plus® were found to have an effect on weld cracking behaviour, with an increased average total crack length in the base metal heat affected zone for both 1160 and 1190 °C as compared to the as cast condition and the 1120 °C homogenization treatment. The increase in cracking susceptibility shows a correlation with the amount of Nb-rich secondary phases, with lower amounts leading to crack concentration to solidification grain boundaries present from the casting process, increasing the average crack length.
|
|
43. |
- Holmberg, Jonas, et al.
(författare)
-
Grit Blasting for Removal of Recast Layer from EDM Process on Inconel 718 Shaft : An Evaluation of Surface Integrity
- 2016
-
Ingår i: Journal of materials engineering and performance (Print). - : Springer Science and Business Media LLC. - 1059-9495 .- 1544-1024. ; 25:12, s. 5540-5550
-
Tidskriftsartikel (refereegranskat)abstract
- The heat generated during EDM melts the work material and thereby allows large amounts to be removed,but an unfavorable surface of a recast layer (RCL) will also be created. This layer has entirely different properties compared to the bulk. Hence, it is of great interest to efficiently remove this layer and to verify that it has been removed. The main objective of this work has been to study the efficiency of grit blasting forremoval of RCL on an EDM aero space shaft. Additionally, x-ray fluorescence (XRF) has been evaluated asa nondestructive measurement to determine RCL presence. The results show that the grit-blasting processing parameters have strong influence on the ability to remove RCL and at the same time introduce beneficial compressive stresses even after short exposure time. Longer exposure will remove the RCL fromthe surface but also increase the risk that a larger amount of the blasting medium will get stuck into the surface. This investigation shows that a short exposure time in combination with a short grit-blasting nozzle distance is the most preferable process setting. It was further found that handheld XRF equipment can be used as a nondestructive measurement in order to evaluate the amount of RCL present on an EDM surface.This was realized by analyzing the residual elements from the EDM wire.
|
|
44. |
- Jaladurgam, Nitesh Raj, 1993
(författare)
-
Heterogeneous deformation of multi-phase engineering materials - an in-situ neutron diffraction study
- 2019
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Gas turbines are complex power generation systems used in aerospace or land-based-power stations. Materials such as Ni-base superalloys are involved in the combustion zone of these machines, which continuously experiences harsh environments with loading at high temperatures. Moreover, the continuous demand for increasing operating temperature to achieve higher efficiencies and reduced emission levels opens the scene to new heat resistant materials like the state-of-the-art high entropy alloys (HEAs), which require a thorough understanding of the structure-process-property relationships. The microstructures of these advanced multi-phase, multi-component alloys are complex, and the deformation is generally heterogeneous both with respect to the different phases and to the crystallographic orientation within each phase. Hence, it is important to understand their behavior and performance during processing and service. In-situ neutron diffraction is a unique technique to probe the deformation behaviour during service/processing-like conditions, including plastic deformation at various temperatures, in order to provide insights into the structure-property relations. In the first part of this work the deformation mechanisms of a newly developed Ni-base superalloy was investigated using in-situ neutron diffraction and electron microscopy at room temperature. In addition, elasto-plastic self-consistent (EPSC) crystal plasticity simulations are used to obtain insights into the operating deformation mechanisms. In the second part, the as-cast eutectic high entropy alloy AlCoCrFeNi2.1 was studied using in-situ neutron diffraction at temperatures from 77 to 673 K. These investigations provide unique insights into the complex heterogeneous deformation behavior of these high-performance multi-phase engineering materials.
|
|
45. |
- Krakhmalev, Pavel, 1973-, et al.
(författare)
-
Influence of heat treatment under hot isostatic pressing (HIP) on microstructure of intermetallic-reinforced tool steel manufactured by laser powder bed fusion
- 2020
-
Ingår i: Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. - : Elsevier BV. - 0921-5093 .- 1873-4936. ; 772
-
Tidskriftsartikel (refereegranskat)abstract
- Microstructure and properties of as-built laser powder bed fusion (LPBF) steels differ from the conventional ones, and they may contain some porosity and lack of fusion. Therefore, post-treatments, including hot isostatic pressing (HIP), are used to density the material, and tailor the properties of the final product. Usually, HIP is performed as an operation separate from heat treatment. In the present investigation a new approach was used, in which the whole cycle of the heat treatment was carried out in HIP under pressure, and the influence of HIP on microstructure of an advanced stainless maraging tool steel manufactured by LPBF was investigated. For a comparison, a conventional steel grade of the same chemical composition, after a heat treatment at the same temperature-time conditions, was also characterized. The microstructure of the steel was investigated by means of advanced microscopy and atom probe tomography. The influence of the manufacturing route, heat treatment and HIP on microstructure, austenitic phase fraction and size distribution of precipitates was investigated, and the role of high pressure in stabilization of austenite in the microstructure was discussed. It was concluded that since HIP influences phase transformations, a fundamental understanding of the influence of HIP on microstructure is nececcary, and development of new post processing regimes guaranteeing the best performance of the material is required.
|
|
46. |
- Kumara, Chamara, et al.
(författare)
-
Microstructure modelling of laser metal powder directed energy deposition of alloy 718
- 2019
-
Ingår i: Additive Manufacturing. - : Elsevier. - 2214-8604 .- 2214-7810. ; 25, s. 357-364
-
Tidskriftsartikel (refereegranskat)abstract
- A multi-component and multi-phase-field modelling approach, combined with transformation kinetics modelling, was used to model microstructure evolution during laser metal powder directed energy deposition of Alloy 718 and subsequent heat treatments. Experimental temperature measurements were utilised to predict microstructural evolution during successive addition of layers. Segregation of alloying elements as well as formation of Laves and δ phase was specifically modelled. The predicted elemental concentrations were then used in transformation kinetics to estimate changes in Continuous Cooling Transformation (CCT) and Time Temperature Transformation (TTT) diagrams for Alloy 718. Modelling results showed good agreement with experimentally observed phase evolution within the microstructure. The results indicate that the approach can be a valuable tool, both for improving process understanding and for process development including subsequent heat treatment.
|
|
47. |
- Matysiak, Hubert, et al.
(författare)
-
Microstructure of Haynes® 282® Superalloy after Vacuum Induction Melting and Investment Casting of Thin-Walled Components
- 2013
-
Ingår i: Materials. - : MDPI AG. - 1996-1944. ; 6:11, s. 5016-5037
-
Tidskriftsartikel (refereegranskat)abstract
- The aim of this work was to characterize the microstructure of the as-cast Haynes® 282® alloy. Observations and analyses were carried out using techniques such as X-ray diffraction (XRD), light microscopy (LM), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray spectroscopy (EDS), wave length dispersive X-ray spectroscopy (WDS), auger electron spectroscopy (AES) and electron energy-loss spectrometry (EELS). The phases identified in the as-cast alloy include: γ (gamma matrix), γʹ (matrix strengthening phase), (TiMoCr)C (primary carbide), TiN (primary nitride), σ (sigma-TCP phase), (TiMo)2SC (carbosulphide) and a lamellar constituent consisting of molybdenum and chromium rich secondary carbide phase together with γ phase. Within the dendrites the γʹ appears mostly in the form of spherical, nanometric precipitates (74 nm), while coarser (113 nm) cubic γʹ precipitates are present in the interdendritic areas. Volume fraction content of the γʹ precipitates in the dendrites and interdendritic areas are 9.6% and 8.5%, respectively. Primary nitrides metallic nitrides (MN), are homogeneously dispersed in the as-cast microstructure, while primary carbides metallic carbides (MC), preferentially precipitate in interdendritic areas. Such preference is also observed in the case of globular σ phase. Lamellar constituents characterized as secondary carbides/γ phases were together with (TiMo)2SC phase always observed adjacent to σ phase precipitates. Crystallographic relations were established in-between the MC, σ, secondary carbides and γ/γʹ matrix.
|
|
48. |
- Singh, Sukhdeep, 1988, et al.
(författare)
-
Investigation on effect of welding parameters on solidification cracking of austenitic stainless steel 314
- 2018
-
Ingår i: Procedia Manufacturing. - : Elsevier BV. - 2351-9789. ; , s. 351-357
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- This study investigates the solidification cracking susceptibility of the austenitic stainless steel 314. Longitudinal Varestraint testing was used with three different set of welding test parameters. Weld speed, current and voltage values were selected so that the same heat input resulted in all the test conditions. From the crack measurements it was seen that the test condition with the lowest current and welding speed value also produced the least amount of cracking with very good repeatability.
|
|
49. |
- Singh, Sukhdeep, 1988, et al.
(författare)
-
Varestraint Weldability Testing of ATI 718Plus® : Influence of Eta Phase
- 2018
-
Ingår i: Proceedings of the 9th International Symposium on Superalloy 718 & Derivatives. - Cham : Springer. - 9783319894799 - 9783319894805 ; , s. 929-937, s. 929-937
-
Konferensbidrag (refereegranskat)abstract
- This study investigates the effect of eta phase on hot cracking susceptibility of ATI 718Plus®. Two heat treatment conditions of 950 °C/1 h and 950 °C/15 h having different amounts of eta phase were tested by longitudinal Varestraint testing method. The heat treatment at 950 °C/15 h exhibited the highest amount of cracking. This was related to the higher amount of eta phase precipitation during the long dwell heat treatment which aided to extensive liquation during welding.
|
|
50. |
- Tolvanen, Sakari, 1984, et al.
(författare)
-
Microstructure and Porosity of Laser Welds in Cast Ti-6Al-4V with Addition of Boron
- 2018
-
Ingår i: Metallurgical and Materials Transactions. A. - : Springer Science and Business Media LLC. - 1073-5623 .- 1543-1940. ; 49A:5, s. 1683-1691
-
Tidskriftsartikel (refereegranskat)abstract
- Addition of small amounts of boron to cast Ti-6Al-4V alloy has shown to render a finer microstructure and improved mechanical properties. For such an improved alloy to be widely applicable for large aerospace structural components, successful welding of such castings is essential. In the present work, the microstructure and porosity of laser welds in a standard grade cast Ti-6Al-4V alloy as well as two modified alloy versions with different boron concentrations have been investigated. Prior-β grain reconstruction revealed the prior-β grain structure in the weld zones. In fusion zones of the welds, boron was found to refine the grain size significantly and rendered narrow elongated grains. TiB particles in the prior-β grain boundaries in the cast base material restricted grain growth in the heat-affected zone. The TiB particles that existed in the as cast alloys decreased in size in the fusion zones of welds. The hardness in the weld zones was higher than in the base material and boron did not have a significant effect on hardness of the weld zones. The fusion zones were smaller in the boron-modified alloys as compared with Ti-6Al-4V without boron. Computed tomography X-ray investigations of the laser welds showed that pores in the FZ of the boron modified alloys were confined to the lower part of the welds, suggesting that boron addition influences melt pool flow. © 2018 The Author(s)
|
|