1. |
- Maurina Morais, Eduardo, 1989, et al.
(author)
-
Solvent-free synthesis of protic ionic liquids. Synthesis, characterization and computational studies of triazolium based ionic liquids
- 2022
-
In: Journal of Molecular Liquids. - : Elsevier BV. - 0167-7322. ; 360
-
Journal article (peer-reviewed)abstract
- A series of triazolium and imidazolium based protic ionic liquids were synthesized using a solvent-free method designed to address several limitations encountered with other commonly used methods. Using this method, pure (98–99% m/m) and dry (128–553 ppm of water) protic ionic liquids were synthesized (in a laboratory scale) without the need for purification methods that require heating the ionic liquid, hence avoiding the common issue of thermal decomposition. This method was also designed to allow for the accurate measurement of acid and base, and for the controlled mixing of both compounds, which is essential to avoid producing impure protic ionic liquids with excess of either acid or base. The system is constructed of only glass and chemically resistant polymer (PTFE and PVDF) parts, which avoid other contaminants that can result from unwanted reactions involving the reagents with common laboratory tools (metallic objects, paper, plastic, etc.). This process is described in detail in the paper as well as in a video. The resulting ionic liquids were carefully analyzed by spectroscopic and thermal methods designed to avoid water absorption, which is known to affect their properties. To complement this experimental characterization, computational chemistry tools were used to assess the ionic liquids’ properties, as well as to assign vibrational modes.
|
|
2. |
- Wojas, Natalia
(author)
-
The dynamic surface nature of calcite and its role in determining the adsorptive stability toward hydrophobizing carboxylic fatty acids
- 2021
-
Doctoral thesis (other academic/artistic)abstract
- Calcium carbonate has attracted a lot of interest over the centuries. Nowadays, mainly as mineral pigment and filler, it has a wide use in technological applications ranging from paper, construction, polymers, and environmental solutions to consumer goods. Amongst these uses, the filler pigment is required to display either hydrophilicity (for applications in aqueous colloidal systems, including, for example, in paper and emulsion paints), or, in contrast, oleophilicity (for applications in contact with oil-based systems, such as plastics and volatile solvent-containing sealants). To achieve oleophilicity, and resulting hydrophobicity, the filler is surface treated, typically using carboxylic fatty acids. In this thesis, effects of humidity and fatty carboxylic acids vapor on CaCO3 surface wettability and nanomechanical properties were studied, with the aim to gain knowledge on layer packing density and order, as well as resistance to water exposure and mechanical wear. A better understanding of the dynamic nature of the calcite surface presented in this work allows the industry to increase sustainable control over materials production and storage. First, a setup combining an atomic force microscope (AFM) with a humidifier was used to map nanomechanical properties of growing surface domains (hydrated form of CaCO3) formed by ion dissolution, diffusion, and redeposition, a process that is not reversible upon drying. Secondly, AFM and contact angle goniometer measurements showed that the stability of the calcite surface improves with increasing carboxylic acid chain length (C2 to C18). Meanwhile, X-ray photoelectron spectroscopy and vibrational sum frequency spectroscopy techniques demonstrated that a coherent layer with maximum packing density of carboxylate and carboxylic acid species was achieved with the use of stearic acid (C18) with high enough vapor pressure and exposure time. The AFM images successfully visualized that a complete C18 monolayer is capable of countering nano-wear of the calcite surface despite the humidity (under the range of loads investigated in this work) and the layer has self-healing properties, while calcite displayed high abrasive wear. Further, when calcite coated by a highly packed monolayer of C18 was covered with a water droplet, a large contact angle hysteresis resulted in a coffee ring effect (CRE). That is leading to formation of hillocks at the contact line consisting of dissolved fatty carboxylic acid and possibly calcium bicarbonate Ca(HCO3)2 molecules transported from the bare calcite region that also is created next to the droplet edge. Interestingly, C18 coated calcite remained considerably more stable in the case where a water droplet saturated with octanoic acid was used instead of water; thus, it was concluded that the CRE can be contained via reduction of the liquid surface tension and contact angle hysteresis.
|
|
3. |
- Maurina Morais, Eduardo, 1989
(author)
-
Synthesis of protic ionic liquids. Challenges and solutions for the synthesis of pure compounds.
- 2022
-
Licentiate thesis (other academic/artistic)abstract
- The urgent need to diversify our energy matrix is responsible for a renewed interest in fuel cell technology, which can use hydrogen gas, a renewable green fuel, as an energy source. This technology is currently a commercially available option, however, it still requires technological improvements before it can be widely used for different applications. One way this technology could potentially be improved is by increasing its temperature range of operation by developing new, anhydrous proton conducting materials. Protic ionic liquids, which are organic salts with low melting temperatures, are interesting candidates for this application, since they can conduct protons in the operational conditions of fuel cells and without the need of water. These compounds can be synthesized by a simple acid-base neutralization reaction, but certain considerations must be taken in order to obtain high quality (dry and pure) protic ionic liquids. In this thesis, a series of triazolium and imidazolium based protic ionic liquids were synthesized using a solvent-free method designed to address several limitations encountered with other commonly used methods. Using this method, pure (98-99% m/m) and dry (128-553 ppm of water) protic ionic liquids were synthesized (in a laboratory scale) without the need for purification methods that require heating the ionic liquid, hence avoiding the common issue of thermal decomposition. This method was also designed to allow for the accurate measurement of acid and base, and for the controlled mixing of both compounds, which is essential to avoid producing impure protic ionic liquids with excess of either acid or base. The system is consists of only glass and chemically resistant polymer(PTFE and PVDF) parts, which avoids other contaminants that can result from unwanted reactions involving the reagents with common laboratory tools (metallic objects, paper, plastic, etc.). The resulting ionic liquids were carefully analyzed by spectroscopic and thermal analysis methods designed to avoid water absorption, which is known to affect their properties. To complement this experimental characterization, computational chemistry tools were used to assess the ionic liquids’ properties, as well as to assign vibrational modes.
|
|
4. |
- Sauer, Christopher, 1993
(author)
-
Green Aromatics: Catalytic Valorisation of bio-derived 2,5-dimethylfuran over Zeolites and Zeotypes
- 2022
-
Doctoral thesis (other academic/artistic)abstract
- This thesis discusses the use of biomass as a potentially green feedstock for the chemical industry in the urgent shift away from fossil resources. I elaborate on reasons why we cannot afford to burn virgin biomass for energy production, among them a variety of ecosystem services that forests and other lands provide. In addition, the utilisation of biomass should be focused on products that sequester and lock away carbon for more extended periods, e.g. timber, materials and chemicals. In particular, biomass can be used as an alternative "carbon neutral" feedstock for the chemical industry, where we can preserve the already existing chemical complexity in the bio-based molecules. One example is the upgrading of furans to benzene, toluene and xylene (BTX) aromatics with the help of zeolite catalysis. These aromatics are important commodity chemicals, where the shift to a bio-based resource could make use of already existing knowledge, catalyst and production infrastructure. However, research is necessary to understand these new feedstock molecules and their interaction with the catalysts and to enable the design of applicable catalysts. In order to study the interaction of the furans, in particular 2,5-dimethylfuran (2,5-dmf), I describe and discuss the development of an analytical methodology that utilises infrared spectroscopy and mass spectrometry for the on-line identification and quantification of product molecules during catalytic reactions. This on-line analysis method is then applied to the catalytic conversion of 2,5-dmf to aromatics over a range of zeolite and zeotype catalysts. In-depth studies with ammonia as a probe molecule of the catalytic active acid sites, as well as temperature programmed experiments with ammonia and 2,5-dmf give insights into product distribution, selectivity changes and deactivation of the catalyst. For example, olefins and aromatics are initially preferred products, while with increasing time on stream, the isomerisation of 2,5-dmf becomes dominant. The incorporation of Ga into the zeotype framework, resulting in a Ga-Silicate, shows how targeted catalyst design can increase overall aromatics production. This catalyst is also suitable for selective isomerisation of 2,5-dmf to 2,4-dimethylfuran, which has a rare substitution pattern. Finally, itwas found that the most valuable of BTX, p -xylene, can be produced more selectively when 2,5-dmf is pre-adsorbed onto zeolite ZSM-5 and then released during a temperature programmed product desorption.
|
|
5. |
- Damas, Giane Benvinda, et al.
(author)
-
Carbon dioxide reduction mechanism on Ru-based electrocatalysts [Ru(bpy)(2)(CO)(2)](2+) : insights from first-principles theory
- 2021
-
In: Sustainable Energy & Fuels. - : Royal Society of Chemistry. - 2398-4902. ; 5:23, s. 6066-6076
-
Journal article (peer-reviewed)abstract
- Solar fuel production through the so-called artificial photosynthesis has attracted a great deal of attention to the development of a new world energy matrix that is renewable and environmentally friendly. This process is characterized by light absorption with enough photon energy to generate conduction electrons, which drive the carbon dioxide reduction to produce organic fuels. It is also common to couple Ru-complex electrocatalysts to form a more efficient and selective hybrid system for this application. In this work, we have undertaken a thorough investigation of the redox reaction mechanism of Ru-based electrocatalysts by means of density functional theory (DFT) methods under the experimental conditions that have been previously reported. More specifically, we have studied the electrochemistry and catalytic activity of the [Ru(bpy)(2)(CO)(2)](2+) coordination complex. Our theoretical assessment supports the following catalytic cycle: (i) [Ru(bpy)(2)(CO)(2)](2+) is transformed into [Ru(bpy)(2)(CO)](0) upon two-electron reduction and CO release; (ii) [Ru(bpy)(2)(CO)](0) is protonated to form the [Ru(bpy)(2)(CO)H](+) hydride complex; (iii) CO2 is activated by the hydride complex through an electrophilic addition to form the [Ru(bpy)(2)(CO)(OCHO)](+) intermediate; (iv) the resulting formic acid ligand is released in solution; and, finally, (v) the CO ligand is reattached to the complex to recover the initial [Ru(bpy)(2)(CO)(2)](2+) catalyst.
|
|
6. |
- Guo, Y. D., et al.
(author)
-
Identification of highly oxygenated organic molecules and their role in aerosol formation in the reaction of limonene with nitrate radical
- 2022
-
In: Atmospheric Chemistry and Physics. - : Copernicus GmbH. - 1680-7316 .- 1680-7324. ; 22:17, s. 11323-11346
-
Journal article (peer-reviewed)abstract
- Nighttime NO3-initiated oxidation of biogenic volatile organic compounds (BVOCs) such as monoterpenes is important for the atmospheric formation and growth of secondary organic aerosol (SOA), which has significant impact on climate, air quality, and human health. In such SOA formation and growth, highly oxygenated organic molecules (HOM) may be crucial, but their formation pathways and role in aerosol formation have yet to be clarified. Among monoterpenes, limonene is of particular interest for its high emission globally and high SOA yield. In this work, HOM formation in the reaction of limonene with nitrate radical (NO3) was investigated in the SAPHIR chamber (Simulation of Atmospheric PHotochemistry In a large Reaction chamber). About 280 HOM products were identified, grouped into 19 monomer families, 11 dimer families, and 3 trimer families. Both closed-shell products and open-shell peroxy radicals (RO2 center dot) 2 were observed, and many of them have not been reported previously. Monomers and dimers accounted for 47% and 47% of HOM concentrations, respectively, with trimers making up the remaining 6 %. In the most abundant monomer families, C10H15-17NO6-14, carbonyl products outnumbered hydroxyl products, indicating the importance of RO2 center dot termination by unimolecular dissociation. Both RO2 center dot autoxidation and alkoxy-peroxy pathways were found to be important processes leading to HOM. Time-dependent concentration profiles of monomer products containing nitrogen showed mainly second-generation formation patterns. Dimers were likely formed via the accretion reaction of two monomer RO2 center dot , and HOM-trimers via the accretion reaction between monomer RO2 center dot and dimer RO2 center dot. Trimers are suggested to play an important role in new particle formation (NPF) observed in our experiment. A HOM yield of 1.5%(+1.7%)(-0.7%) was estimated considering only first-generation products. SOA mass growth could be reasonably explained by HOM condensation on particles assuming irreversible uptake of ultra-low volatility organic compounds (ULVOCs), extremely low volatility organic compounds (ELVOCs), and low volatility organic compounds (LVOCs). This work provides evidence for the important role of HOM formed via the limonene +NO3 reaction in NPF and growth of SOA particles.
|
|
7. |
- Guo, Y., et al.
(author)
-
Reversible Structural Isomerization of Nature's Water Oxidation Catalyst Prior to O-O Bond Formation
- 2022
-
In: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 0002-7863 .- 1520-5126. ; 144:26, s. 11736-11747
-
Journal article (peer-reviewed)abstract
- Photosynthetic water oxidation is catalyzed by a manganese-calcium oxide cluster, which experiences five "S-states" during a light-driven reaction cycle. The unique "distorted chair"-like geometry of the Mn4CaO5(6)cluster shows structural flexibility that has been frequently proposed to involve "open" and "closed"-cubane forms from the S1 to S3states. The isomers are interconvertible in the S1 and S2states, while in the S3state, the open-cubane structure is observed to dominate inThermosynechococcus elongatus (cyanobacteria) samples. In this work, using density functional theory calculations, we go beyond the S3+Yzstate to the S3nYz•→ S4+Yzstep, and report for the first time that the reversible isomerism, which is suppressed in the S3+Yzstate, is fully recovered in the ensuing S3nYz•state due to the proton release from a manganese-bound water ligand. The altered coordination strength of the manganese-ligand facilitates formation of the closed-cubane form, in a dynamic equilibrium with the open-cubane form. This tautomerism immediately preceding dioxygen formation may constitute the rate limiting step for O2formation, and exert a significant influence on the water oxidation mechanism in photosystem II.
|
|
8. |
|
|
9. |
- Barišić, Antun, et al.
(author)
-
Experimental Data Contributing to the Elusive Surface Charge of Inert Materials in Contact with Aqueous Media
- 2021
-
In: Colloids and interfaces. - : MDPI. - 2504-5377. ; 5:1
-
Journal article (other academic/artistic)abstract
- We studied the charging of inert surfaces (polytetrafluoroethylene, i.e., PTFE; graphite; graphene; and hydrophobic silica) using classical colloid chemistry approaches. Potentiometric titrations showed that these surfaces acquired less charge from proton-related reactions than oxide minerals. The data from batch-type titrations for PTFE powder did not show an effect of ionic strength, which was also in contrast with results for classical colloids. In agreement with classical colloids, the electrokinetic results for inert surfaces showed the typical salt level dependence. In some cases, the point of zero net proton charge as determined from mass and tentatively from acid–base titration differed from isoelectric points, which has also been previously observed, for example by Chibowski and co-workers for ice electrolyte interfaces. Finally, we found no evidence for surface contaminations of our PTFE particles before and after immersion in aqueous solutions. Only in the presence of NaCl-containing solutions did cryo-XPS detect oxygen from water. We believe that our low isoelectric points for PTFE were not due to impurities. Moreover, the measured buffering at pH 3 could not be explained by sub-micromolar concentrations of contaminants. The most comprehensive explanation for the various sets of data is that hydroxide ion accumulation occurred at the interfaces between inert surfaces and aqueous solutions.
|
|
10. |
- Luong, N. Tan, 1995-
(author)
-
Water film-mediated mineralogical transformations and photocatalytic reactions
- 2023
-
Doctoral thesis (other academic/artistic)abstract
- Mineral particles capture water vapor in the atmosphere in the form of water films that are only few monolayers thick. Water films form nanoscale hydration environments that mediate a wide range of important reactions in nature and technology. This thesis explored two important phenomena that commonly occur within the confines of water films: mineralogical transformations (Topic 1) and photocatalytic decomposition of organics (Topic 2). These transformations were chiefly identified by vibrational spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy and (Transmission and Scanning) electron microscopy. Interpretations of reaction mechanisms were partially supported by chemometrics, kinetic and thermodynamic modeling, as well as molecular simulations.Mineralogical transformations (Topic 1) resolved in this thesis involved the hydroxylation (Papers I, II) and carbonation (Paper III) of periclase (MgO), and the oxidation of rhodochrosite (MnCO3) (Paper IV). Two types of MgO nanocubes with contrasting physical properties were used to resolve nucleation- and diffusion-limited hydroxylation reactions to brucite and carbonation reactions to amorphous magnesium carbonate (AMC). While nucleation-limited reactions completely transformed (8 nm) small and aggregated MgO nanocubes to brucite, the reactions became diffusion-limited in larger (32 nm) monodispersed MgO nanocubes because of brucite surface nanocoatings (Paper I). Additionally, brucite nanosheets grew under (GPa-level) crystallization pressures because of the important volumetric expansion of the reaction, which took place in a complex network of microporosity between the small and within the larger MgO nanocubes. Brucite stacking mechanisms, explored in Paper II, focused on the early stages of MgO-water interaction in water films of different thicknesses. These were suggested to involve the stacking and (epitaxial-like) growth of precursor Mg(OH)2 nanosheets in water films. Carbonation reactions explored in Paper III completely hampered hydroxylation reactions studied in Papers I and II, and produced AMC nanocoatings grown over an unreacted MgO core. Finally, oxidation-driven reactions involving rhodochrosite in Paper IV produced MnO2, Mn3O4, and MnOOH nanocoatings with growth rates being scaled with water loadings.Photocatalytic decomposition reactions of organics (Topic 2) were focused on the case of oxalate bound to TiO2 nanoparticles (Paper V). Photodecomposition rates scaled with humidity in oxygenated water films, and were explained by the combination of hole transfer (HT), ligand-to-metal charge transfer (LMCT), and the formation of hydroxyl radicals and reactive oxygen species. Decreasing rates in oxygen-free water films were, on the other hand, explained by water-driven charge localization, which eventually limited radical production and charge transfers via HT and LMCT. The reactions involved limited HT and LMCT processes which also competed with a charge recombination process across all humidity ranges.This thesis provides new insight into two key types of transformations mediated by water films on minerals. This knowledge can be used to understand the reactivity of mineral (nano)particles exposed to variations in atmospheric humidity and oxygen content, which are both highly relevant to a wide range of settings in nature and technology. It can also advance new ideas in the study of mineral growth, especially within the confines of nanometer-thick water films.
|
|