1. |
- Van Chien, Trinh, 1989-
(författare)
-
Spatial Resource Allocation in Massive MIMO Communications : From Cellular to Cell-Free
- 2020
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Massive MIMO (multiple-input multiple-output) is considered as an heir of the multi-user MIMO technology and it has gained lots of attention from both academia and industry since the last decade. By equipping base stations (BSs) with hundreds of antennas in a compact array or a distributed manner, this new technology can provide very large multiplexing gains by serving many users on the same time-frequency resources and thereby bring significant improvements in spectral efficiency (SE) and energy efficiency (EE) over the current wireless networks. The transmit power, pilot training, and spatial transmission resources need to be allocated properly to the users to achieve the highest possible performance. This is called resource allocation and can be formulated as design utility optimization problems. If the resource allocation in Massive MIMO is optimized, the technology can handle the exponential growth in both wireless data traffic and number of wireless devices, which cannot be done by the current cellular network technology.In this thesis, we focus on the five different resource allocation aspects in Massive MIMO communications: The first part of the thesis studies if power control and advanced coordinated multipoint (CoMP) techniques are able to bring substantial gains to multi-cell Massive MIMO systems compared to the systems without using CoMP. More specifically, we consider a network topology with no cell boundary where the BSs can collaborate to serve the users in the considered coverage area. We focus on a downlink (DL) scenario in which each BS transmits different data signals to each user. This scenario does not require phase synchronization between BSs and therefore has the same backhaul requirements as conventional Massive MIMO systems, where each user is preassigned to only one BS. The scenario where all BSs are phase synchronized to send the same data is also included for comparison. We solve a total transmit power minimization problem in order to observe how much power Massive MIMO BSs consume to provide the requested quality of service (QoS) of each user. A max-min fairness optimization is also solved to provide every user with the same maximum QoS regardless of the propagation conditions.The second part of the thesis considers a joint pilot design and uplink (UL) power control problem in multi-cell Massive MIMO. The main motivation for this work is that the pilot assignment and pilot power allocation is momentous in Massive MIMO since the BSs are supposed to construct linear detection and precoding vectors from the channel estimates. Pilot contamination between pilot-sharing users leads to more interference during data transmission. The pilot design is more difficult if the pilot signals are reused frequently in space, as in Massive MIMO, which leads to greater pilot contamination effects. Related works have only studied either the pilot assignment or the pilot power control, but not the joint optimization. Furthermore, the pilot assignment is usually formulated as a combinatorial problem leading to prohibitive computational complexity. Therefore, in the second part of this thesis, a new pilot design is proposed to overcome such challenges by treating the pilot signals as continuous optimization variables. We use those pilot signals to solve different max-min fairness optimization problems with either ideal hardware or hardware impairments.The third part of this thesis studies a two-layer decoding method that mitigates inter-cell interference in multi-cell Massive MIMO systems. In layer one, each BS estimates the channels to intra-cell users and uses the estimates for local decoding within the cell. This is followed by a second decoding layer where the BSs cooperate to mitigate inter-cell interference. An UL achievable SE expression is computed for arbitrary two-layer decoding schemes, while a closed form expression is obtained for correlated Rayleigh fading channels, maximum-ratio combining (MRC), and largescale fading decoding (LSFD) in the second layer. We formulate a sum SE maximization problem with both the data power and LSFD vectors as optimization variables. Since the problem is non-convex, we develop an algorithm based on the weighted minimum mean square error (MMSE) approach to obtain a stationary point with low computational complexity.Motivated by recent successes of deep learning in predicting the solution to an optimization problem with low runtime, the fourth part of this thesis investigates the use of deep learning for power control optimization in Massive MIMO. We formulate the joint data and pilot power optimization for maximum sum SE in multi-cell Massive MIMO systems, which is a non-convex problem. We propose a new optimization algorithm, inspired by the weighted MMSE approach, to obtain a stationary point in polynomial time. We then use this algorithm together with deep learning to train a convolutional neural network to perform the joint data and pilot power control in sub-millisecond runtime. The solution is suitable for online optimization.Finally, the fifth part of this thesis considers a large-scale distributed antenna system that serves the users by coherent joint transmission called Cell-free Massive MIMO. For a given user set, only a subset of the access points (APs) is likely needed to satisfy the users' performance demands. To find a flexible and energy-efficient implementation, we minimize the total power consumption at the APs in the DL, considering both the hardware consumed and transmit powers, where APs can be turned off to reduce the former part. Even though this is a nonconvex optimization problem, a globally optimal solution is obtained by solving a mixed-integer second-order cone program (SOCP). We also propose low-complexity algorithms that exploit group-sparsity or received power strength in the problem formulation.
|
|
2. |
- Özdogan, Özgecan, 1992-
(författare)
-
Analysis of Cellular and Cell-Free Massive MIMO with Rician Fading
- 2020
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The data traffic in cellular networks has grown at an exponential pace for decades. This trend will most probably continue in the future, driven by new innovative applications. One of the key enablers of future cellular networks is the massive MIMO technology. A massive MIMO base station is equipped with a massive number (e.g., a hundred) of individually steerable antennas, which can be effectively used to serve tens of user equipments simultaneously on the same time-frequency resource. It can provide a notable enhancement of both spectral efficiency and energy efficiency in comparison with conventional MIMO.In the literature, the achievable spectral efficiencies of massive MIMO systems with a practical number of antennas have been rigorously characterized and optimized when the channels are subject to either spatially uncorrelated or correlated Rayleigh fading. Typically, in massive MIMO research, i.i.d. Rayleigh fading or less frequently free-space line-of-sight (LoS) channel models are assumed since they simplify the analysis. Massive MIMO technology is able to support both rich scattering and LoS scenarios. However, practical channels can consist of a combination of an LoS path and a correlated small-scale fading component caused by a finite number of scattering clusters that can be modeled by spatially correlated Rician fading. In the first part of this thesis, we consider a multi-cell scenario with spatially correlated Rician fading channels and derive closed-form achievable spectral efficiency expressions for different signal processing techniques.Alternatively, a massive number of antennas can be spread over a large geographical area and this concept is called cell-free massive MIMO. In the canonical form of cell-free massive MIMO, the access points cooperate via a fronthaul network to spatially multiplex the users on the same time-frequency resource using network MIMO methods that only require locally obtained channel state information. Cellfree massive MIMO is a densely deployed system. Hence, the probability of having an LoS path between some access points and the users is quite high. In the second part of this thesis, we consider a practical scenario where the channels between the access points and the users are modeled with Rician fading.
|
|
3. |
- Becirovic, Ema, 1992-
(författare)
-
On Massive MIMO for Massive Machine-Type Communications
- 2020
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- To cover all the needs and requirements of mobile networks in the future, the predicted usage of the mobile networks has been split into three use-cases: enhanced mobile broadband, ultra-reliable low-latency communication, and massive machine-type communication. In this thesis we focus on the massive machine-type communication use-case which is intended to facilitate the ever increasing number of smart devices and sensors.In the massive machine-type communication use-case, the main challenges are to accommodate a huge number of devices while keeping the battery lives of the devices long, and allowing them to be placed in far-away locations. However, these devices are not concerned about other features such as latency, high data rate, or mobility.In this thesis we study the application of massive MIMO (multiple-input multiple-output) technology for the massive machine-type communication use-case. Massive MIMO has been on the radar as an enabler for future communication networks in the last decade and is now firmly rooted in both academia and industry. The main idea of massive MIMO is to utilize a base station with a massive number of antennas which gives the ability to spatially direct signals and serve multiple devices in the same time- and frequency resource.More specifically, in this thesis we study A) a scenario where the base station takes advantage of a device's low mobility to improve its channel estimate, B) a random access scheme for massive machine-type communication which can accommodate a huge number of devices, and C) a case study where the benefits of massive MIMO for long range devices are quantified. The results are that the base station can significantly improve the channel estimates for a low mobility user such that it can tolerate lower SNR while still achieving the same rate. Additionally, the properties of massive MIMO greatly helps to detect users in random access scenarios and increase link-budgets compared to single-antenna base stations.
|
|
4. |
- Interdonato, Giovanni, 1986-
(författare)
-
Cell-Free Massive MIMO : Scalability, Signal Processing and Power Control
- 2020
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The fifth generation of mobile communication systems (5G) is nowadays a reality. 5G networks are been deployed all over the world, and the first 5G-capable devices (e.g., smartphones, tablets, wearable, etc.) are already commercially available. 5G systems provide unprecedented levels of connectivity and quality of service (QoS) to cope with the incessant growth in the number of connected devices and the huge increase in data-rate demand.Massive MIMO (multiple-input multiple-output) technology plays a key role in 5G systems. The underlying principle of this technology is the use of a large number of co-located antennas at the base station, which coherently transmit/receive signals to/from multiple users. This signal co-processing at multiple antennas leads to manifold benefits: array gain, spatial diversity and spatial user multiplexing. These elements enable to meet the QoS requirements established for the 5G systems. The major bottleneck of massive MIMO systems as well as of any cellular network is the inter-cell interference, which affects significantly the cell-edge users, whose performance is already degraded by the path attenuation. To overcome these limitations and provide uniformly excellent service to all the users we need a more radical approach: we need to challenge the cellular paradigm.In this regard, cell-free massive MIMO constitutes the paradigm shift. In the cell-free paradigm, it is not the base station surrounded by the users, but rather it is each user being surrounded by smaller, simpler, serving base stations referred to as access points (APs). In such a system, each user experiences being in the cell-center, and it does not experience any cell boundaries. Hence, the terminology cell-free. As a result, users are not affected by inter-cell interference, and the path attenuation is significantly reduced due to the presence of many APs in their proximity. This leads to impressive performance.Although appealing from the performance viewpoint, the designing and implementation of such a distributed massive MIMO system is a challenging task, and it is the object of this thesis. More specifically, in this thesis we study:Paper A) The large potential of this promising technology in realistic indoor/outdoor scenarios while also addressing practical deployment issues, such as clock synchronization among APs, and cost-efficient implementations. We provide an extensive description of a cell-free massive MIMO system, emphasizing strengths and weaknesses, and pointing out differences and similarities with existing distributed multiple antenna systems, such as Coordinated MultiPoint (CoMP). Paper B) How to preserve the scalability of the system, by proposing a solution related to data processing, network topology and power control. We consider a realistic scenario where multiple central processing units serve disjoint subsets of APs, and compare the spectral efficiency provided by the proposed scalable framework with the canonical cell-free massive MIMO and CoMP. Paper C) How to improve the spectral efficiency (SE) in the downlink (DL), by devising two distributed precoding schemes, referred to as local partial zero-forcing (ZF) and local protective partial ZF, that provide an adaptable trade-off between interference cancelation and boosting of the desired signal, with no additional front-haul overhead, and that are implementable by APs with very few antennas. We derive closed-form expressions for the achievable SE under the assumption of independent Rayleigh fading channel, channel estimation error and pilot contamination. These closed-form expressions are then used to devise optimal max-min fairness power control. Paper D) How to further improve the SE by letting the user estimate the DL channel from DL pilots, instead of relying solely on the knowledge of the channel statistics. We derive an approximate closed-form expression of the DL SE for conjugate beamforming (CB), and assuming independent Rayleigh fading. This expression accounts for beamformed DL pilots, estimation errors and pilot contamination at both the AP and the user side. We devise a sequential convex approximation algorithm to globally solve the max-min fairness power control optimization problem, and a greedy algorithm for uplink (UL) and DL pilot assignment. The latter consists in jointly selecting the UL and DL pilot pair, for each user, that maximizes the smallest SE in the network. Paper E) A precoding scheme that is more suitable when only the channel statistics are available at the users, referred to as enhanced normalized CB. It consists in normalizing the precoding vector by its squared norm in order to reduce the fluctuations of the effective channel seen at the user, and thereby to boost the channel hardening. The performance achieved by this scheme is compared with the CB scheme with DL training (described in Paper D). Paper F) A maximum-likelihood-based method to estimate the channel statistics in the UL, along with an accompanying pilot transmission scheme, that is particularly useful in line-of-sight operation and in scenarios with resource constraints. Pilots are structurally phase-rotated over different coherence blocks to create an effective statistical distribution of the received pilot signal that can be efficiently exploited by the AP when performing the proposed estimation method.The overall conclusion is that cell-free massive MIMO is not a utopia, and a practical, distributed, scalable, high-performance system can be implemented. Today it represents a hot research topic, but tomorrow it might represent a key enabler for beyond-5G technology, as massive MIMO has been for 5G.
|
|
5. |
- Van Chien, Trinh, 1989-, et al.
(författare)
-
Power Control in Cellular Massive MIMO With Varying User Activity : A Deep Learning Solution
- 2020
-
Ingår i: IEEE Transactions on Wireless Communications. - : Institute of Electrical and Electronics Engineers (IEEE). - 1536-1276 .- 1558-2248. ; 19:9, s. 5732-5748
-
Tidskriftsartikel (refereegranskat)abstract
- This paper considers the sum spectral efficiency (SE) optimization problem in multi-cell Massive MIMO systems with a varying number of active users. This is formulated as a joint pilot and data power control problem. Since the problem is non-convex, we first derive a novel iterative algorithm that obtains a stationary point in polynomial time. To enable real-time implementation, we also develop a deep learning solution. The proposed neural network, PowerNet, only uses the large-scale fading information to predict both the pilot and data powers. The main novelty is that we exploit the problem structure to design a single neural network that can handle a dynamically varying number of active users; hence, PowerNet is simultaneously approximating many different power control functions with varying number inputs and outputs. This is not the case in prior works and thus makes PowerNet an important step towards a practically useful solution. Numerical results demonstrate that PowerNet only loses 2% in sum SE, compared to the iterative algorithm, in a nine-cell system with up to 90 active users per in each coherence interval, and the runtime was only 0.03 ms on a graphics processing unit (GPU). When good data labels are selected for the training phase, PowerNet can yield better sum SE than by solving the optimization problem with one initial point.
|
|