1. |
- Li, Jiantong, et al.
(författare)
-
Ink-jet printed thin-film transistors with carbon nanotube channels shaped in long strips
- 2011
-
Ingår i: Journal of Applied Physics. - : AIP Publishing. - 0021-8979 .- 1089-7550. ; 109:8, s. 084915-
-
Tidskriftsartikel (refereegranskat)abstract
- The present work reports on the development of a class of sophisticated thin-film transistors (TFTs) based on ink-jet printing of pristine single-walled carbon nanotubes (SWCNTs) for the channel formation. The transistors are manufactured on oxidized silicon wafers and flexible plastic substrates at ambient conditions. For this purpose, ink-jet printing techniques are developed with the aim of high-throughput production of SWCNT thin-film channels shaped in long strips. Stable SWCNT inks with proper fluidic characteristics are formulated by polymer addition. The present work unveils, through Monte Carlo simulations and in light of heterogeneous percolation, the underlying physics of the superiority of long-strip channels for SWCNT TFTs. It further predicts the compatibility of such a channel structure with ink-jet printing, taking into account the minimum dimensions achievable by commercially available printers. The printed devices exhibit improved electrical performance and scalability as compared to previously reported ink-jet printed SWCNT TFTs. The present work demonstrates that ink-jet printed SWCNT TFTs of long-strip channels are promising building blocks for flexible electronics.
|
|
2. |
- Li, Zheng, et al.
(författare)
-
Inkjet Printed Disposable High-Rate On-Paper Microsupercapacitors
- 2022
-
Ingår i: Advanced Functional Materials. - : Wiley. - 1616-301X .- 1616-3028. ; 32:1, s. 2108773-
-
Tidskriftsartikel (refereegranskat)abstract
- On-paper microsupercapacitors (MSCs) are a key energy storage component for disposable electronics that are anticipated to essentially address the increasing global concern of electronic waste. However, nearly none of the present on-paper MSCs combine eco-friendliness with high electrochemical performance (especially the rate capacity). In this work, highly reliable conductive inks based on the ternary composite of poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS), graphene quantum dots and graphene are developed for scalable inkjet printing of compact (footprint area ≈ 20 mm2) disposable MSCs on commercial paper substrates. Without any post treatment, the printed patterns attain a sheet resistance as low as 4 Ω ▫−1. The metal-free all-solid-state MSCs exhibit a maximum areal capacitance > 2 mF cm−2 at a high scan rate of 1000 mV s−1, long cycle life (>95% capacitance retention after 10 000 cycles), excellent flexibility, and long service time. Remarkably, the “totally metal-free” MSC arrays are fully inkjet printed on paper substrates and also exhibit high rate performance. The life cycle assessment indicates that these printed devices have much lower eco-toxicity and global warming potential than other on-paper MSCs.
|
|
3. |
- Liu, Zhiying, et al.
(författare)
-
On Gate Capacitance of Nanotube Networks
- 2011
-
Ingår i: IEEE Electron Device Letters. - : IEEE. - 0741-3106 .- 1558-0563. ; 32:5, s. 641-643
-
Tidskriftsartikel (refereegranskat)abstract
- This letter presents a systematic investigation of the gate capacitance C-G of thin-film transistors (TFTs) based on randomly distributed single-walled carbon nanotubes (SWCNTs) in the channel. In order to reduce false counting of SWCNTs that do not contribute to current conduction, C-G is directly measured on the TFTs using a well-established method for MOSFETs. Frequency dispersion of C-G is observed, and it is found to depend on the percolation behavior in SWCNT networks. This dependence can be accounted for using an RC transmission line model. These results are of important implications for the determination of carrier mobility in nanoparticle-based TFTs.
|
|
4. |
|
|
5. |
- Qu, Minni, et al.
(författare)
-
Charge-Injection-Induced Time Decay in Carbon Nanotube Network-Based FETs
- 2010
-
Ingår i: IEEE Electron Device Letters. - 0741-3106 .- 1558-0563. ; 31:10, s. 1098-1100
-
Tidskriftsartikel (refereegranskat)abstract
- A voltage-pulse method is utilized to investigate the charge-injection-induced time decay of the source-drain current of field-effect transistors with randomly networked single-walled carbon nanotubes (CNTs) as the conduction channel. The relaxation of trapped carriers in the CNT networks can be accounted for by assuming two exponential decays occurring simultaneously. The slow decay is characterized by a time constant comparable to literature data obtained for a carrier recombination in the semiconducting CNTs. The faster decay with a time constant that has a smaller order of magnitude is attributed to the annihilation of trapped carriers in metallic CNTs or at metal-CNT contacts. Both time constants are gate-bias dependent.
|
|
6. |
- Su, Yingchun, et al.
(författare)
-
Monolithic Fabrication of Metal‐Free On‐Paper Self‐Charging Power Systems
- 2024
-
Ingår i: Advanced Functional Materials. - : Wiley. - 1616-301X .- 1616-3028.
-
Tidskriftsartikel (refereegranskat)abstract
- Self-charging power systems (SCPSs) are envisioned as promising solutions for emerging electronics to mitigate the increasing global concern about battery waste. However, present SCPSs suffer from large form factors, unscalable fabrication, and material complexity. Herein, a type of highly stable, eco-friendly conductive inks based on poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) are developed for direct ink writing of multiple components in the SCPSs, including electrodes for miniaturized spacer-free triboelectric nanogenerators (TENGs) and microsupercapacitors (MSCs), and interconnects. The principle of “one ink, multiple functions” enables to almost fully print the entire SCPSs on the same paper substrate in a monolithic manner without post-integration. The monolithic fabrication significantly improves the upscaling capability for manufacturing and reduces the form factor of the entire SCPSs (a small footprint area of ≈2 cm × 3 cm and thickness of ≈1 mm). After pressing/releasing the TENGs for ≈79000 cycles, the 3-cell series-connected MSC array can be charged to 1.6 V while the 6-cell array to 3.0 V. On-paper SCPSs are promising to serve as lightweight, thin, sustainable, and low-cost power supplies.
|
|
7. |
- Chen, Shiqian, et al.
(författare)
-
Ultrafast metal-free microsupercapacitor arrays directly store instantaneous high-voltage electricity from mechanical energy harvesters
- 2024
-
Ingår i: Advanced Science. - : Wiley. - 2198-3844. ; 11:22
-
Tidskriftsartikel (refereegranskat)abstract
- Harvesting renewable mechanical energy is envisioned as a promising and sustainable way for power generation. Many recent mechanical energy harvesters are able to produce instantaneous (pulsed) electricity with a high peak voltage of over 100 V. However, directly storing such irregular high-voltage pulse electricity remains a great challenge. The use of extra power management components can boost storage efficiency but increase system complexity. Here utilizing the conducting polymer PEDOT:PSS, high-rate metal-free micro-supercapacitor (MSC) arrays are successfully fabricated for direct high-efficiency storage of high-voltage pulse electricity. Within an area of 2.4 × 3.4 cm2 on various paper substrates, large-scale MSC arrays (comprising up to 100 cells) can be printed to deliver a working voltage window of 160 V at an ultrahigh scan rate up to 30 V s−1. The ultrahigh rate capability enables the MSC arrays to quickly capture and efficiently store the high-voltage (≈150 V) pulse electricity produced by a droplet-based electricity generator at a high efficiency of 62%, significantly higher than that (<2%) of the batteries or capacitors demonstrated in the literature. Moreover, the compact and metal-free features make these MSC arrays excellent candidates for sustainable high-performance energy storage in self-charging power systems.
|
|
8. |
- Hu, Xiangzhao, et al.
(författare)
-
Boosting Industrial-Level CO2 Electroreduction of N-Doped Carbon Nanofibers with Confined Tin-Nitrogen Active Sites via Accelerating Proton Transport Kinetics
- 2023
-
Ingår i: Advanced Functional Materials. - : John Wiley and Sons Inc. - 1616-301X .- 1616-3028. ; 33:4
-
Tidskriftsartikel (refereegranskat)abstract
- The development of highly efficient robust electrocatalysts with low overpotential and industrial-level current density is of great significance for CO2 electroreduction (CO2ER), however the low proton transport rate during the CO2ER remains a challenge. Herein, a porous N-doped carbon nanofiber confined with tin-nitrogen sites (Sn/NCNFs) catalyst is developed, which is prepared through an integrated electrospinning and pyrolysis strategy. The optimized Sn/NCNFs catalyst exhibits an outstanding CO2ER activity with the maximum CO FE of 96.5%, low onset potential of −0.3 V, and small Tafel slope of 68.8 mV dec−1. In a flow cell, an industrial-level CO partial current density of 100.6 mA cm−2 is achieved. In situ spectroscopic analysis unveil the isolated Sn-N site acted as active center for accelerating water dissociation and subsequent proton transport process, thus promoting the formation of intermediate *COOH in the rate-determining step for CO2ER. Theoretical calculations validate pyrrolic N atom adjacent to the Sn-N active species assisted reducing the energy barrier for *COOH formation, thus boosting the CO2ER kinetics. A Zn-CO2 battery is designed with the cathode of Sn/NCNFs, which delivers a maximum power density of 1.38 mW cm−2 and long-term stability.
|
|
9. |
- Li, Gui, et al.
(författare)
-
In operando study of microsupercapacitors with gel electrolytes using nano-beam synchrotron X-ray diffraction
- 2024
-
Ingår i: Batteries & Supercaps. - : Wiley-VCH Verlagsgesellschaft. - 2566-6223. ; 7:8
-
Tidskriftsartikel (refereegranskat)abstract
- Synchrotron radiation X-ray diffraction (XRD) with nanoscale beam size was used here for in situ and in operando study of micro-supercapacitors (MSC) with gel electrolyte and MXene Ti3C2Tx electrodes. The electrode structure was characterized as a function of applied voltage and distance from the gap separating electrodes using microscopic cells with cylindrical shape designed for transmission mode XRD. The devices with gel electrolytes based on H2SO4 (with H2O/PVA and DMSO/PVA) showed stable performance with no changes in MXene structure under voltage swaps between positive and negative values. Experiments with KI-based electrolytes demonstrated changes of MXene structure correlated with decrease of energy storage parameters under conditions of increased operation voltage starting from 0.8 V. The optimal performance of the MSCs was observed when the MXene structure remained unchanged upon switching the applied voltage polarity. The changes of inter-layer distance of MXene upon swap of applied voltage correlate with decrease of device performance and are undesirable for stable operation of MSC's. We also tested feasibility of X-ray fluorescence (XRF) for characterization of electrolyte ion migration in MSCs using 2D element mapping. Irreversible sorption of iodine by MXene was found using XRF mapping of charged electrodes using standard in-plane MSC device and KI electrolyte.
|
|
10. |
- Li, Jiantong, et al.
(författare)
-
Conductivity exponents in stick percolation
- 2010
-
Ingår i: Physical Review E. Statistical, Nonlinear, and Soft Matter Physics. - : American Physical Society. - 1063-651X .- 1095-3787. ; 81:021120
-
Tidskriftsartikel (refereegranskat)abstract
- On the basis of Monte Carlo simulations, the present work systematically investigates how conductivity exponents depend on the ratio of stick-stick junction resistance to stick resistance for two-dimensional stick percolation. Simulation results suggest that the critical conductivity exponent extracted from size-dependent conductivities of systems exactly at the percolation threshold is independent of the resistance ratio and has a constant value of 1.280 +/- 0.014. In contrast, the apparent conductivity exponent extracted from density-dependent conductivities of systems well above the percolation threshold monotonically varies with the resistance ratio, following an error function, and lies in the vicinity of the critical exponent.
|
|