1. |
- Benesperi, Iacopo, et al.
(författare)
-
Dynamic dimer copper coordination redox shuttles
- 2022
-
Ingår i: Chem. - : Elsevier. - 2451-9308 .- 2451-9294. ; 8:2, s. 439-449
-
Tidskriftsartikel (refereegranskat)abstract
- Summary Conventional redox mediators based on metal coordination complexes undergo electron transfer through the change in oxidation state of the metal center. However, electron transfer kinetics are offset toward preferred oxidation states when preorganized ligands constrain the reorganization of the coordination sphere. In contrast, we report here on dimeric copper(II/I) redox couples, wherein the extent of oxidation/reduction of two metal centers dictates the dynamic formation of dimer and monomer complexes: the dimeric (Cu(I))2 transitions to monomers of Cu(II). The bis(thiazole/pyrrole)-bipyridine tetradentate ligands stabilize both oxidation states of the unique redox systems. The dynamic dimer redox mediators offer a viable two-electron redox mechanism to develop efficient hybrid solar cells through inhibited recombination and rapid charge transport. Density functional theory calculations reveal inner reorganization energies for single-electron transfer as low as 0.27 eV, marking the dimeric complexes superior redox systems over single complexes as liquid and potentially solid-state electrolytes.
|
|
2. |
- Benesperi, Iacopo, et al.
(författare)
-
The researcher's guide to solid-state dye-sensitized solar cells
- 2018
-
Ingår i: Journal of Materials Chemistry C. - : Royal Society of Chemistry. - 2050-7526 .- 2050-7534. ; 6:44, s. 11903-11942
-
Forskningsöversikt (refereegranskat)abstract
- In order to sustainably support its ever-increasing energy demand, the human society will have to harvest renewable energy wherever and whenever possible. When converting light to electricity, silicon solar cells are the technology of choice to harvest direct sunlight due to their high performance and continuously dropping price. For diffused light and indoor applications, however, silicon is not the material of choice. To power the next gizmo in your smart home, dye-sensitized solar cells (DSCs) are a viable alternative. Made from inexpensive, earth-abundant, and non-toxic materials, DSCs perform best at low light intensity. So far, issues such as leakage of the liquid electrolyte and its corrosive nature have limited the commercialization of this technology. To overcome these limitations, solid-state DSCs (ssDSCs) - in which the liquid electrolyte is replaced by a solid material - have been developed. For many years their efficiencies have been poor, preventing them from being widely employed. In the past six years, however, research efforts have led them to rival with their liquid counterparts. Here, we will review recent advancements in the field of ssDSCs. Every device component will be acknowledged, from metal oxides and new dyes to novel hole transporters, dopants, counter-electrodes and device architectures. After reviewing materials, long-term stability of devices will be addressed, finally giving an insight into the future that awaits this exciting technology.
|
|
3. |
- Davison, Nathan, et al.
(författare)
-
A room-temperature-stable electride and its reactivity : Reductive benzene/pyridine couplings and solvent-free Birch reductions
- 2023
-
Ingår i: Chem. - : Elsevier. - 2451-9308 .- 2451-9294. ; 9:3, s. 576-591
-
Tidskriftsartikel (refereegranskat)abstract
- In this work, we report the synthesis of a room-temperature-stable electride (RoSE) reagent, namely K+(LiHMDS)e− (1) (HMDS: 1,1,1,3,3,3-hexamethyldisilazide), from accessible starting materials (potassium metal and LiHMDS) via mechanochemical ball milling at 20 mmol scale. Despite its amorphous nature, the presence of anionic electrons in 1, key diagnostic criteria for an electride, was confirmed by both experimental and computational studies. Therefore, by definition, 1 is an electride. Utilizing its anionic electrons, electride reagent 1 exhibited a versatile reactivity profile that includes (1) mediation of C–H activation and C–C coupling of benzene and pyridine and (2) mediation of solvent-free Birch reduction. This work proves the concept of facile mechanochemical synthesis of a room-temperature-stable electride, and it introduces electride 1 to the synthetic chemistry community as a versatile reagent.
|
|
4. |
- Glinka, Adam, et al.
(författare)
-
Interface Modification and Exceptionally Fast Regeneration in Copper Mediated Solar Cells Sensitized with Indoline Dyes
- 2020
-
Ingår i: The Journal of Physical Chemistry C. - : AMER CHEMICAL SOC. - 1932-7447 .- 1932-7455. ; 124:5, s. 2895-2906
-
Tidskriftsartikel (refereegranskat)abstract
- The photovoltaic performance of solar cells sensitized with indoline D205 dye and its new derivative comprising an alkoxysilyl anchoring unit (D205Si) in the [Cu(tmby)(2)](TFSI)(2/1) (tmby = 4,4',6,6'-tetramethyl-2,2'-bipyridine, TFSI = bis(trifluoromethane)sulfonimide) redox couple mediated systems was studied in the presence of various titania/dye/electrolyte interface modifications. Cucurbit[7]uril (CB7) was employed to encapsulate dye molecules, creating an electronically insulating layer, suppressing electron interception by redox mediator, and leading to the increase in the electron lifetime in the titania conduction band. For example, the electron lifetime increased from 2.2 to 6.5 ms upon CB7 encapsulation of D205 cells at 0.9 V voltage. Further, molecular multicapping was optimized to minimize dye desorption and prevent electron recombination. As a result, photovoltaic performance was found to be enhanced by the interface modifications in most cases, especially when applied to the alkoxysilyl anchoring derivative. The charge transfer processes (dye regeneration, titania-dye and titania-redox mediator recombination) in the above-mentioned system and in the reference [Co(bpy)(3)](TFSI)(3/2) (bpy = 2,2'-bipyridine) redox couple mediated systems were investigated by means of small light perturbation electron lifetime measurements, electrochemical impedance spectroscopy, and nanosecond and femtosecond transient absorption spectroscopies. Indoline dyes were also found to be outstandingly fast regenerated by the Cu-based mediator (time constant shorter than 100 ns), which may open new opportunities for sensitizer improvements.
|
|
5. |
- Jacobsson, T. Jesper, 1984-, et al.
(författare)
-
An open-access database and analysis tool for perovskite solar cells based on the FAIR data principles
- 2022
-
Ingår i: Nature Energy. - : Springer Nature. - 2058-7546. ; 7:1, s. 107-115
-
Tidskriftsartikel (refereegranskat)abstract
- Large datasets are now ubiquitous as technology enables higher-throughput experiments, but rarely can a research field truly benefit from the research data generated due to inconsistent formatting, undocumented storage or improper dissemination. Here we extract all the meaningful device data from peer-reviewed papers on metal-halide perovskite solar cells published so far and make them available in a database. We collect data from over 42,400 photovoltaic devices with up to 100 parameters per device. We then develop open-source and accessible procedures to analyse the data, providing examples of insights that can be gleaned from the analysis of a large dataset. The database, graphics and analysis tools are made available to the community and will continue to evolve as an open-source initiative. This approach of extensively capturing the progress of an entire field, including sorting, interactive exploration and graphical representation of the data, will be applicable to many fields in materials science, engineering and biosciences.
|
|
6. |
- Lindh, Linnea, et al.
(författare)
-
Dye-sensitized solar cells based on Fe N-heterocyclic carbene photosensitizers with improved rod-like push-pull functionality
- 2021
-
Ingår i: Chemical Science. - : Royal Society of Chemistry (RSC). - 2041-6520 .- 2041-6539. ; 12:48, s. 16035-16053
-
Tidskriftsartikel (refereegranskat)abstract
- A new generation of octahedral iron(ii)-N-heterocyclic carbene (NHC) complexes, employing different tridentate C^N^C ligands, has been designed and synthesized as earth-abundant photosensitizers for dye sensitized solar cells (DSSCs) and related solar energy conversion applications. This work introduces a linearly aligned push-pull design principle that reaches from the ligand having nitrogen-based electron donors, over the Fe(ii) centre, to the ligand having an electron withdrawing carboxylic acid anchor group. A combination of spectroscopy, electrochemistry, and quantum chemical calculations demonstrate the improved molecular excited state properties in terms of a broader absorption spectrum compared to the reference complex, as well as directional charge-transfer displacement of the lowest excited state towards the semiconductor substrate in accordance with the push-pull design. Prototype DSSCs based on one of the new Fe NHC photosensitizers demonstrate a power conversion efficiency exceeding 1% already for a basic DSSC set-up using only the I−/I3−redox mediator and standard operating conditions, outcompeting the corresponding DSSC based on the homoleptic reference complex. Transient photovoltage measurements confirmed that adding the co-sensitizer chenodeoxycholic acid helped in improving the efficiency by increasing the electron lifetime in TiO2. Time-resolved spectroscopy revealed spectral signatures for successful ultrafast (<100 fs) interfacial electron injection from the heteroleptic dyes to TiO2. However, an ultrafast recombination process results in undesirable fast charge recombination from TiO2back to the oxidized dye, leaving only 5-10% of the initially excited dyes available to contribute to a current in the DSSC. On slower timescales, time-resolved spectroscopy also found that the recombination dynamics (longer than 40 μs) were significantly slower than the regeneration of the oxidized dye by the redox mediator (6-8 μs). Therefore it is the ultrafast recombination down to fs-timescales, between the oxidized dye and the injected electron, that remains as one of the main bottlenecks to be targeted for achieving further improved solar energy conversion efficiencies in future work.
|
|
7. |
- Michaels, Hannes, 1994-
(författare)
-
A molecular guide to efficient charge transport : Coordination materials for photovoltaic cells
- 2022
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Emerging solar energy conversion and energy storage technologies play a vital role in solving the present energy crisis and achieving carbon net zero. Currently, they are limited by the use of inefficient, unstable and expensive charge transport materials. The development of new charge transport materials is still far behind the efforts that have been made to develop the light-absorbing or other components. Metalorganic coordination compounds offer unique sets of properties as hybrids between conductive metals and tunable organic molecules. The coordination of the metal centers is crucial to control in order to maximise the solar cell efficiency - or undesired electronic recombination limits the power output. Tetradentate ligands allow copper complexes to dynamically switch between dimers or monomers, pending the oxidation state of the metal ions. The high energy barrier for the reduction of CuII monomers prevents electron transfer across the TiO2|dye|electrolyte interface: Interfacial recombination is reduced and the dye-sensitised solar cells achieve greater photovoltages. Coordination complexes linked into low-dimensional coordination polymers afford charge transport with an electrical conductivity as high as 0.1 S m-1 via band-like conduction at room temperature, needless of cationic dopants. The polymers rapidly extract photoexcited charges from halide perovskite films. 14% power conversion efficiency were recorded from a perovskite solar cell based on a carbon counter electrode. The solar cell stability was much increased compared to heavily doped organic hole conductors. Emerging dye-sensitised solar cells excel especially under ambient conditions, and have been proposed as power sources for dispatched electronic devices (the Internet of things), in place of single-use and difficult-to-recycle batteries. Through tailoring of the optical response and the electrolyte composition, power conversion efficiencies of 37.5% with photovoltages of 1.00 V at 1000 lux (fluorescent lamp) are demonstrated. The increased performance is identified to stem from reduced interfacial recombination by transient photovoltage methods as well as electrochemical impedance spectroscopy. A series of prototype tests underline the feasibility of light harvesters as power sources for electronic devices, executing sophisticated computation tasks such as machine learning. The devices self-optimise their energy consumption; adaptive sleep and small supercapacitors allow to sustain device operation during periods of fluctuating energy availability.
|
|
8. |
- Michaels, Hannes, et al.
(författare)
-
Assessment of TiO2 Blocking Layers for CuII/I-Electrolyte Dye-Sensitized Solar Cells by Electrochemical Impedance Spectroscopy
- 2022
-
Ingår i: ACS Applied Energy Materials. - : American Chemical Society (ACS). - 2574-0962. ; 5:2, s. 1933-1941
-
Tidskriftsartikel (refereegranskat)abstract
- The TiO2 blocking layer in dye-sensitized solar cells is the most difficult component to evaluate at thicknesses below 50 nm, but it is crucial for the power conversion efficiency. Here, the electrode capacitance of TiO2 blocking layers is tested in aqueous [Fe(CN)6]3–/4– and correlated to the performance of photoanodes in devices based on a [Cu(tmby)2]2+/+ electrolyte. The effects of the blocking layer on electronic recombination in the devices are illustrated with transient photovoltage methods and electrochemical impedance analysis. We have thus demonstrated a feasible and facile method to assess TiO2 blocking layers for the fabrication of dye-sensitized solar cells.
|
|
9. |
- Michaels, Hannes, et al.
(författare)
-
Challenges and prospects of ambient hybrid solar cell applications
- 2021
-
Ingår i: Chemical Science. - : Royal Society of Chemistry. - 2041-6520 .- 2041-6539. ; 12:14, s. 5002-5015
-
Forskningsöversikt (refereegranskat)abstract
- The impending implementation of billions of Internet of Things and wireless sensor network devices has the potential to be the next digital revolution, if energy consumption and sustainability constraints can be overcome. Ambient photovoltaics provide vast universal energy that can be used to realise near-perpetual intelligent IoT devices which can directly transform diffused light energy into computational inferences based on artificial neural networks and machine learning. At the same time, a new architecture and energy model needs to be developed for IoT devices to optimize their ability to sense, interact, and anticipate. We address the state-of-the-art materials for indoor photovoltaics, with a particular focus on dye-sensitized solar cells, and their effect on the architecture of next generation IoT devices and sensor networks.
|
|
10. |
- Michaels, Hannes, et al.
(författare)
-
Copper Complexes with Tetradentate Ligands for Enhanced Charge Transport in Dye-Sensitized Solar Cells
- 2018
-
Ingår i: Inorganics. - : MDPI AG. - 2304-6740. ; 6:2
-
Tidskriftsartikel (refereegranskat)abstract
- In dye-sensitized solar cells (DSCs), the redox mediator is responsible for the regeneration of the oxidized dye and for the hole transport towards the cathode. Here, we introduce new copper complexes with tetradentate 6,6-bis(4-(S)-isopropyl-2-oxazolinyl)-2,2-bipyridine ligands, Cu(oxabpy), as redox mediators. Copper coordination complexes with a square-planar geometry show low reorganization energies and thus introduce smaller losses in photovoltage. Slow recombination kinetics of excited electrons between the TiO2 and Cu-II(oxabpy) species lead to an exceptionally long electron lifetime, a high Fermi level in the TiO2, and a high photovoltage of 920 mV with photocurrents of 10 mA.cm(-2) and 6.2% power conversion efficiency. Meanwhile, a large driving force remains for the dye regeneration of the Y123 dye with high efficiencies. The square-planar Cu(oxabpy) complexes yield viscous gel-like solutions. The unique charge transport characteristics are attributed to a superposition of diffusion and electronic conduction. An enhancement in charge transport performance of 70% despite the higher viscosity is observed upon comparison of Cu(oxabpy) to the previously reported Cu(tmby)(2) redox electrolyte.
|
|