| 1. |
- Airiskallio, E., et al.
(författare)
-
High temperature oxidation of Fe-Al and Fe-Cr-Al alloys : The role of Cr as a chemically active element
- 2010
-
Ingår i: Corrosion Science. - : Elsevier BV. - 0010-938X .- 1879-0496. ; 52:10, s. 3394-3404
-
Tidskriftsartikel (refereegranskat)abstract
- Good high-temperature corrosion resistance of Fe-Al alloys in oxidizing environments is due to the alpha-Al2O3 film which is formed on the surface provided temperature is above 900 degrees C and the Al-content of the alloy exceeds the critical value. Ab initio calculations combined with experiments on Fe-13Al, Fe-18Al, Fe-23Al and Fe-10Cr-10Al alloys show that the beneficial effect of Cr on the oxidation resistance is significantly related to bulk effects. The comparison of experimental and calculated results indicates a clear correlation between the Fe-Cr chemical potential difference and the formation of the protective oxide scales. (C) 2010 Elsevier Ltd. All rights reserved.
|
|
| 2. |
- Airiskallio, E., et al.
(författare)
-
Third element effect in the surface zone of Fe-Cr-Al alloys
- 2010
-
Ingår i: Physical Review B. Condensed Matter and Materials Physics. - 1098-0121 .- 1550-235X. ; 81:3
-
Tidskriftsartikel (refereegranskat)abstract
- The third element effect to improve the high temperature corrosion resistance of the low-Al Fe-Cr-Al alloys is suggested to involve a mechanism that boosts the recovering of the Al concentration to the required level in the Al-depleted zone beneath the oxide layer. We propose that the key factor in this mechanism is the coexistent Cr depletion that helps to maintain a sufficient Al content in the depleted zone. Several previous experiments related to our study support that conditions for such a mechanism to be functional prevail in real oxidation processes of Fe-Cr-Al alloys.
|
|
| 3. |
- Kokko, K., et al.
(författare)
-
Atomistic study of surfaces and interfaces of Fe-Cr and Fe-Cr-Al alloys
- 2013
-
Ingår i: Physical and numerical simulation of materials processing VII. - : Trans Tech Publications Inc.. - 9783037857281 ; , s. 728-733
-
Konferensbidrag (refereegranskat)abstract
- Surface and interface properties of Fe-Cr, Fe-Al, and Fe-Cr-Al are studied using Exact Muffin-Tin Orbitals and Monte Carlo methods and with x-ray photoelectron and Auger electron techniques. Surface composition is investigated as a function of oxidation (heating) time. Hard x ray photoelectron spectroscopy (HAXPES) is used to scan non destructively the compositions below the surface. It is found that Cr boosts the Al segregation to the surface.
|
|
| 4. |
|
|
| 5. |
- Airiskallio, E., et al.
(författare)
-
Magnetic origin of the chemical balance in alloyed Fe-Cr stainless steels : First-principles and Ising model study
- 2014
-
Ingår i: Computational materials science. - : Elsevier BV. - 0927-0256 .- 1879-0801. ; 92, s. 135-140
-
Tidskriftsartikel (refereegranskat)abstract
- Iron-chromium is the base material for most of the stainless steel grades. Recently, new insights into the origins of fundamental physical and chemical characteristics of Fe-Cr based alloys have been achieved. Some of the new results are quite unexpected and call for further investigations. The present study focuses on the magnetic contribution in the atomic driving forces related to the chemical composition in Fe-Cr when alloyed with Al, Ti, V, Mn, Co, Ni, and Mo. Using the ab initio exact muffin-tin orbitals method combined with an Ising-type spin model, we demonstrate that the magnetic moment of the solute atoms with the induced changes in the magnetic moments of the host atoms form the main factor in determining the mixing energy and chemical potentials of low-Cr Fe-Cr based alloys. The results obtained in the present work are related to the designing and tuning of the microstructure and corrosion protection of low-Cr steels.
|
|
| 6. |
- Nurmi, J, et al.
(författare)
-
Effect of peritoneal dialysis on abdominal circumference
- 2010
-
Ingår i: Peritoneal dialysis international : journal of the International Society for Peritoneal Dialysis. - : SAGE Publications. - 1718-4304 .- 0896-8608. ; 30:2, s. 215-217
-
Tidskriftsartikel (refereegranskat)abstract
- Peritoneal dialysis (PD) is probably underused because of fears concerning the body image of patients. For the purposes of providing exact information for patients when choosing between PD and hemodialysis, we studied the extent of increase in waist circumference by infusing dialysate. Methods The abdominal circumference of 44 PD patients was measured before and after infusion of dialysate. The change in circumference was compared to body mass index (BMI) and length of the abdominal cavity, defined by the distance between the processus xiphoideus and the os pubis. Results Mean abdominal circumferences at the umbilicus and the iliac crest increased from 92.6 ± 10.1 to 95.5 ± 10.0 cm and from 95.2 ± 8.5 to 96.2 ± 6.3 cm, respectively, when dialysate was infused ( p value for both < 0.01). A dialysate volume of 2000 mL increased the circumference only slightly more than the increase seen with 1500 mL. The change in circumference was not correlated with the circumference before the infusion, BMI, height of the patient, or length of the abdominal cavity. Conclusions This study shows that normal PD fill volumes increase the waist circumference only a little. This finding should ease the patient's presumption of PD changing the body image.
|
|
| 7. |
- Privalova, E, et al.
(författare)
-
CO2 removal with ‘switchable’ versus ‘classical’ ionic liquids
- 2012
-
Ingår i: Separation and Purification Technology. - Amsterdam : Elsevier. - 1383-5866 .- 1873-3794. ; 97, s. 42-50
-
Tidskriftsartikel (refereegranskat)abstract
- Switchable ionic liquids (SILs) are promising solvents for CO2 separation due to their high CO2 capturing efficiency and easy preparation compared to ‘classical’ ionic liquids. Considering viscosity, the present study has demonstrated that SILs formed at least two times stronger chemical bonds with CO2 than studied classical ionic liquids (ILs). Furthermore, the reversible properties of SILs were confirmed by evaluation of different regeneration methods. On average, molar fractions of CO2 were more than 0.3 outperforming acetate-based ILs (molar fraction of CO2 around 0.25) and more than ten times the capacity of physical ionic liquids (molar fraction 0.02). Consequently, SILs are found to be efficient CO2 absorbents operating at atmospheric pressure.HighlightsComparison of ionic liquid systems acting as chemical vs. physical solvents in practical terms. ► Recycling and reuse issues of ionic liquids in carbon dioxide capture. ► Introduction of new types of switchable ionic liquids. ► Studying the capture-release cycle behavior of the aforementioned ionic liquids. ► In essence, we have focused on engineering aspects.
|
|
| 8. |
|
|
| 9. |
|
|
| 10. |
|
|
