| 1. |
- Hammar, Arvid, 1986, et al.
(författare)
-
Stray light suppression of a compact off-axis telescope for a satellite-borne instrument for atmospheric research
- 2018
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. ; 10815
-
Konferensbidrag (refereegranskat)abstract
- In this study, simulations and measurements were used to investigate stray light properties of the three-mirror off-axis telescope of a new satellite for atmospheric research called Mesospheric Airglow/Aerosol Tomography Spectroscopy (MATS). A 700 mm breadboard baffle for stray light rejection has been designed and tested. Good performance was achieved by coating the baffle’s inside with Vantablack S-VIS R , which has a hemispherical reflectance of 0.2-0.6% across the instrument’s detection band (270-776 nm). A point source transmittance (PST) down to 10−6 was measured for the full-size baffle breadboard. This is in excellent agreement with simulations performed in OpticStudio/LightTools, where scattering was modeled using empirical BRDF data. From the breadboard results, a simulation model of a flight-representative prototype model of the entire instrument was set up in OpticStudio. Strong signals just outside the field of view constitute the biggest challenge, where a PST in the order of 10-6 − 10-4 is required. Simulations suggest that the PST of the prototype limb instrument will be lower than this. Adding to these simulations, an instrument model was developed, which will be utilized by the end-users to remove unwanted features in the data stemming from the instrument itself. Besides stray light, the model also takes into account the most relevant aspects of the instrument, such as image resolution (from measured/simulated point spread functions), image sensor characteristics as well as temperature and wavelength dependencies.
|
|
| 2. |
- Hammar, Arvid, 1986, et al.
(författare)
-
Wide-field off-axis telescope for the Mesospheric Airglow/Aerosol Tomography Spectroscopy satellite
- 2019
-
Ingår i: Applied Optics. - 1559-128X .- 2155-3165. ; 58:6, s. 1393-1397
-
Tidskriftsartikel (refereegranskat)abstract
- We present the development of a compact ?/7.3 (?=35 mm) three-mirror reflective telescope for the atmospheric-research microsatellite Mesospheric Airglow/Aerosol Tomography Spectroscopy (MATS). The telescope design was driven by the end users’ need for a reflective wide-field (5.67°×0.91°) optic with high stray light rejection and six detection channels with separate image sensors, operating at wavelengths 270–772 nm. For the first time, a design method for wide-field off-axis telescopes—in which linear astigmatism is eliminated—was applied and tested in practice. Single-point diamond turning was used to produce two sets of 37–110 mm large free-form aluminum mirrors with surface figure errors and roughness values of 34–62 nm (RMS)/193–497 nm (PV) and 2.8–3.5 nm (RMS), respectively. A method that combines precise machining and geometry measurements (using a coordinate measuring machine) was employed to fabricate an aluminum structure to accurately position the mirrors without the need for manual alignment. The telescope was tested with a network of plate beamsplitters and filters, which define the spectral selection for the six detection channels. Imaging performance measurements were carried out using a reflective off-axis collimator, which projects imaging targets at infinite focus. A modulation transfer function (MTF) value of 0.45 at 20 lp/mm was measured at ∼760 nm (diffraction limit: 0.85) using a slanted edge target. By modeling the measured mirror surfaces in optical design software, a reoptimization of the mirror positions could be performed and an improved MTF of ∼0.75 at 20 lp/mm was predicted. The results demonstrate design- and building methods that can be utilized to make off-axis telescopes for a vast range of applications.
|
|
