1. |
- Peng, Shi-Yu, et al.
(author)
-
Reduced motor cortex GABABR function following chronic alcohol exposure
- 2021
-
In: Molecular Psychiatry. - : SPRINGERNATURE. - 1359-4184 .- 1476-5578. ; 26:2, s. 383-395
-
Journal article (peer-reviewed)abstract
- The GABA(B) receptor (GABA(B)R) agonist baclofen has been used to treat alcohol and several other substance use disorders (AUD/SUD), yet its underlying neural mechanism remains unclear. The present study aimed to investigate cortical GABA(B)R dynamics following chronic alcohol exposure. Ex vivo brain slice recordings from mice chronically exposed to alcohol revealed a reduction in GABA(B)R-mediated currents, as well as a decrease of GABA(B1/2)R and G-protein-coupled inwardly rectifying potassium channel 2 (GIRK2) activities in the motor cortex. Moreover, our data indicated that these alterations could be attributed to dephosphorylation at the site of serine 783 (ser-783) in GABA(B2) subunit, which regulates the surface expression of GABA(B)R. Furthermore, a human study using paired-pulse-transcranial magnetic stimulation (TMS) analysis further demonstrated a reduced cortical inhibition mediated by GABA(B)R in patients with AUD. Our findings provide the first evidence that chronic alcohol exposure is associated with significantly impaired cortical GABA(B)R function. The ability to promote GABA(B)R signaling may account for the therapeutic efficacy of baclofen in AUD.
|
|
2. |
- Beal, Jacob, et al.
(author)
-
Robust estimation of bacterial cell count from optical density
- 2020
-
In: Communications Biology. - : Springer Science and Business Media LLC. - 2399-3642. ; 3:1
-
Journal article (peer-reviewed)abstract
- Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data.
|
|
3. |
- Ching, Tao-Chung, et al.
(author)
-
The JCMT BISTRO-2 Survey: Magnetic Fields of the Massive DR21 Filament
- 2022
-
In: Astrophysical Journal. - : American Astronomical Society. - 1538-4357 .- 0004-637X. ; 941:2
-
Journal article (peer-reviewed)abstract
- We present 850 mu m dust polarization observations of the massive DR21 filament from the B-fields In STar-forming Region Observations (BISTRO) survey, using the POL-2 polarimeter and the SCUBA-2 camera on the James Clerk Maxwell Telescope. We detect ordered magnetic fields perpendicular to the parsec-scale ridge of the DR21 main filament. In the subfilaments, the magnetic fields are mainly parallel to the filamentary structures and smoothly connect to the magnetic fields of the main filament. We compare the POL-2 and Planck dust polarization observations to study the magnetic field structures of the DR21 filament on 0.1-10 pc scales. The magnetic fields revealed in the Planck data are well-aligned with those of the POL-2 data, indicating a smooth variation of magnetic fields from large to small scales. The plane-of-sky magnetic field strengths derived from angular dispersion functions of dust polarization are 0.6-1.0 mG in the DR21 filament and similar to 0.1 mG in the surrounding ambient gas. The mass-to-flux ratios are found to be magnetically supercritical in the filament and slightly subcritical to nearly critical in the ambient gas. The alignment between column density structures and magnetic fields changes from random alignment in the low-density ambient gas probed by Planck to mostly perpendicular in the high-density main filament probed by James Clerk Maxwell Telescope. The magnetic field structures of the DR21 filament are in agreement with MHD simulations of a strongly magnetized medium, suggesting that magnetic fields play an important role in shaping the DR21 main filament and subfilaments.
|
|
4. |
- Kwon, Woojin, et al.
(author)
-
B-fields in Star-forming Region Observations (BISTRO): Magnetic Fields in the Filamentary Structures of Serpens Main
- 2022
-
In: Astrophysical Journal. - : American Astronomical Society. - 1538-4357 .- 0004-637X. ; 926:2
-
Journal article (peer-reviewed)abstract
- We present 850 mu m polarimetric observations toward the Serpens Main molecular cloud obtained using the POL-2 polarimeter on the James Clerk Maxwell Telescope as part of the B-fields In STar-forming Region Observations survey. These observations probe the magnetic field morphology of the Serpens Main molecular cloud on about 6000 au scales, which consists of cores and six filaments with different physical properties such as density and star formation activity. Using the histogram of relative orientation (HRO) technique, we find that magnetic fields are parallel to filaments in less-dense filamentary structures where NH2 < 0.93 x 10(22) cm(-2) (magnetic fields perpendicular to density gradients), while they are perpendicular to filaments (magnetic fields parallel to density gradients) in dense filamentary structures with star formation activity. Moreover, applying the HRO technique to denser core regions, we find that magnetic field orientations change to become perpendicular to density gradients again at NH2 approximate to 4.6 x 10(22) NH2 approximate to 16 x 10(22) cm(-2), magnetic fields change back to being parallel to density gradients once again, which can be understood to be due to magnetic fields being dragged in by infalling material. In addition, we estimate the magnetic field strengths of the filaments (B-POS = 60-300 mu G)) using the Davis-Chandrasekhar-Fermi method and discuss whether the filaments are gravitationally unstable based on magnetic field and turbulence energy densities.
|
|
5. |
- Luo, Yifei, et al.
(author)
-
Technology Roadmap for Flexible Sensors
- 2023
-
In: ACS Nano. - : American Chemical Society. - 1936-0851 .- 1936-086X. ; 17:6, s. 5211-5295
-
Research review (peer-reviewed)abstract
- Humans rely increasingly on sensors to address grand challenges and to improve quality of life in the era of digitalization and big data. For ubiquitous sensing, flexible sensors are developed to overcome the limitations of conventional rigid counterparts. Despite rapid advancement in bench-side research over the last decade, the market adoption of flexible sensors remains limited. To ease and to expedite their deployment, here, we identify bottlenecks hindering the maturation of flexible sensors and propose promising solutions. We first analyze challenges in achieving satisfactory sensing performance for real-world applications and then summarize issues in compatible sensor-biology interfaces, followed by brief discussions on powering and connecting sensor networks. Issues en route to commercialization and for sustainable growth of the sector are also analyzed, highlighting environmental concerns and emphasizing nontechnical issues such as business, regulatory, and ethical considerations. Additionally, we look at future intelligent flexible sensors. In proposing a comprehensive roadmap, we hope to steer research efforts towards common goals and to guide coordinated development strategies from disparate communities. Through such collaborative efforts, scientific breakthroughs can be made sooner and capitalized for the betterment of humanity.
|
|
6. |
- Chen, Shi-Peng, et al.
(author)
-
Guanidine-based protic ionic liquids as highly efficient intermolecular scissors for dissolving natural cellulose
- 2023
-
In: Green Chemistry. - : Royal Society of Chemistry. - 1463-9262 .- 1463-9270. ; 25:22, s. 9322-9334
-
Journal article (peer-reviewed)abstract
- The development of highly efficient and environmentally friendly solvents for dissolving cellulose, which is the most abundant natural polymer on Earth, remains a challenge, hindering its full utilization. Herein, a green protic ionic liquid, 1,1,3,3-tetramethylguanidinium methoxyacetate ([TMGH][MAA]), was found to exhibit attractive capacity to dissolve natural cellulose with an appropriate TMG/MAA molar ratio of 7 : 3 at 80 degrees C. The solubility of cotton linter and ultra-high molecular weight cotton fibers reached 13% (w/w) and 3% (w/w), respectively, surpassing that of most solvent systems currently used for the dissolution of cellulose. The experimental and simulation results verified that the excellent dissolution ability of [TMGH][MAA] for cellulose is mainly attributed to the destruction of the intrinsic hydrogen-bond networks in cellulose by the synergistic interactions of the [TMGH] cations and [MAA] anions with the hydroxyl groups in the cellulose chains, acting as highly efficient "intermolecular scissors". The superiority of this novel dissolution system was further demonstrated by the remarkable comprehensive properties of the regenerated cellulose film including satisfactory thermostability, high transparency, and excellent mechanical properties. Furthermore, the satisfactory recovery performance of this solvent highlights its significant feasibility for large-scale industrial manufacturing. The proposed [TMGH][MAA] in this study exhibits great potential as a next-generation processing solvent for dissolving, and thus processing cellulose, promoting the sustainable development of high-value-added cellulose materials.
|
|
7. |
- Fenstermacher, M.E., et al.
(author)
-
DIII-D research advancing the physics basis for optimizing the tokamak approach to fusion energy
- 2022
-
In: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 62:4
-
Journal article (peer-reviewed)abstract
- DIII-D physics research addresses critical challenges for the operation of ITER and the next generation of fusion energy devices. This is done through a focus on innovations to provide solutions for high performance long pulse operation, coupled with fundamental plasma physics understanding and model validation, to drive scenario development by integrating high performance core and boundary plasmas. Substantial increases in off-axis current drive efficiency from an innovative top launch system for EC power, and in pressure broadening for Alfven eigenmode control from a co-/counter-I p steerable off-axis neutral beam, all improve the prospects for optimization of future long pulse/steady state high performance tokamak operation. Fundamental studies into the modes that drive the evolution of the pedestal pressure profile and electron vs ion heat flux validate predictive models of pedestal recovery after ELMs. Understanding the physics mechanisms of ELM control and density pumpout by 3D magnetic perturbation fields leads to confident predictions for ITER and future devices. Validated modeling of high-Z shattered pellet injection for disruption mitigation, runaway electron dissipation, and techniques for disruption prediction and avoidance including machine learning, give confidence in handling disruptivity for future devices. For the non-nuclear phase of ITER, two actuators are identified to lower the L-H threshold power in hydrogen plasmas. With this physics understanding and suite of capabilities, a high poloidal beta optimized-core scenario with an internal transport barrier that projects nearly to Q = 10 in ITER at ∼8 MA was coupled to a detached divertor, and a near super H-mode optimized-pedestal scenario with co-I p beam injection was coupled to a radiative divertor. The hybrid core scenario was achieved directly, without the need for anomalous current diffusion, using off-axis current drive actuators. Also, a controller to assess proximity to stability limits and regulate β N in the ITER baseline scenario, based on plasma response to probing 3D fields, was demonstrated. Finally, innovative tokamak operation using a negative triangularity shape showed many attractive features for future pilot plant operation.
|
|
8. |
- Gao, Mingming, et al.
(author)
-
Engineered 2D MXene-based materials for advanced supercapacitors and micro-supercapacitors
- 2024
-
In: Materials Today. - 1369-7021 .- 1873-4103. ; 72, s. 318-358
-
Research review (peer-reviewed)abstract
- The class of two-dimensional transition metal carbides/nitrides/oxycarbides (known as MXenes) has shown great potential in energy storage applications due to their intrinsic layered structure, outstanding electrical conductivity, tunable surface chemistry, and unique physicochemical properties. This review summarizes the latest progresses of MXene-based materials for supercapacitors and micro-supercapacitors. First, state-of-the-art structural engineering strategies for the construction of novel MXene-based electrodes are highlighted, as the electrochemical performance of MXenes is influenced by their structure, such as interlayer spacing and surface functional group density. Furthermore, the charge storage mechanisms of MXene-based electrodes in different electrolytes are discussed to stimulate further design and development of tailored materials for high-performance devices. Moreover, different device fabrication technologies are summarized and the achievements of specific device geometries (e.g., fiber-shape, planar-type, and three-dimensional devices) containing MXene-based materials are critically reviewed. Finally, perspectives and outlook for the development of high-performance MXene-based electrodes in terms of material engineering, performance improvement and device innovation are provided, clearly indicating research directions for next-generation advanced energy storage devices.
|
|
9. |
- Lu, Shen-ning, et al.
(author)
-
Application of an innovative grid-based surveillance strategy to ensure elimination and prevent reintroduction of malaria in high-risk border communities in China
- 2022
-
In: BMC Public Health. - : Springer Nature. - 1471-2458. ; 22:1
-
Journal article (peer-reviewed)abstract
- Grid management is a grassroots governance strategy widely implemented in China since 2004 to improve the government's efficiency to actively find and solve problems among populated regions. A grid-based strategy surveillancing high-risk groups, including mobile and migrant populations (MMPs), in the China-Myanmar border region has played an indispensable role in promoting and consolidating the malaria elimination efforts by tracking and timely identification of potential importation or re-establishment of malaria among MMPs. A sequential mixed methods was implementated to explore the operational mechanism and best practices of the grid-based strategy including through the focus group discussions (FGDs), comparison of before and after the implementation of a grid-based strategy in the field sites, and data collection from the local health system.This paper distills the implementation mechanism and highlights the role of the grid-based strategy in the elimination and prevention of re-establishment of malaria transmission.
|
|
10. |
- Lyo, A-Ran, et al.
(author)
-
The JCMT BISTRO Survey: An 850/450 mu m Polarization Study of NGC 2071IR in Orion B
- 2021
-
In: Astrophysical Journal. - : American Astronomical Society. - 1538-4357 .- 0004-637X. ; 918:2
-
Journal article (peer-reviewed)abstract
- We present the results of simultaneous 450 mu m and 850 mu m polarization observations toward the massive star-forming region NGC 2071IR, a target of the BISTRO (B-fields in STar-forming Region Observations) Survey, using the POL-2 polarimeter and SCUBA-2 camera mounted on the James Clerk Maxwell Telescope. We find a pinched magnetic field morphology in the central dense core region, which could be due to a rotating toroidal disklike structure and a bipolar outflow originating from the central young stellar object IRS 3. Using the modified Davis-Chandrasekhar-Fermi method, we obtain a plane-of-sky magnetic field strength of 563 +/- 421 mu G in the central similar to 0.12 pc region from 850 mu m polarization data. The corresponding magnetic energy density of 2.04 x 10(-8) erg cm(-3) is comparable to the turbulent and gravitational energy densities in the region. We find that the magnetic field direction is very well aligned with the whole of the IRS 3 bipolar outflow structure. We find that the median value of polarization fractions is 3.0% at 450 mu m in the central 3 ' region, which is larger than the median value of 1.2% at 850 mu m. The trend could be due to the better alignment of warmer dust in the strong radiation environment. We also find that polarization fractions decrease with intensity at both wavelengths, with slopes, determined by fitting a Rician noise model of 0.59 +/- 0.03 at 450 mu m and 0.36 +/- 0.04 at 850 mu m, respectively. We think that the shallow slope at 850 mu m is due to grain alignment at the center being assisted by strong radiation from the central young stellar objects.
|
|