1. |
- Wuttke, Matthias, et al.
(författare)
-
A catalog of genetic loci associated with kidney function from analyses of a million individuals
- 2019
-
Ingår i: Nature Genetics. - : NATURE PUBLISHING GROUP. - 1061-4036 .- 1546-1718. ; 51:6, s. 957-972
-
Tidskriftsartikel (refereegranskat)abstract
- Chronic kidney disease (CKD) is responsible for a public health burden with multi-systemic complications. Through transancestry meta-analysis of genome-wide association studies of estimated glomerular filtration rate (eGFR) and independent replication (n = 1,046,070), we identified 264 associated loci (166 new). Of these,147 were likely to be relevant for kidney function on the basis of associations with the alternative kidney function marker blood urea nitrogen (n = 416,178). Pathway and enrichment analyses, including mouse models with renal phenotypes, support the kidney as the main target organ. A genetic risk score for lower eGFR was associated with clinically diagnosed CKD in 452,264 independent individuals. Colocalization analyses of associations with eGFR among 783,978 European-ancestry individuals and gene expression across 46 human tissues, including tubulo-interstitial and glomerular kidney compartments, identified 17 genes differentially expressed in kidney. Fine-mapping highlighted missense driver variants in 11 genes and kidney-specific regulatory variants. These results provide a comprehensive priority list of molecular targets for translational research.
|
|
2. |
- Buermans, J., et al.
(författare)
-
Characterization of ECRH plasmas in TOMAS
- 2024
-
Ingår i: Physics of Plasmas. - : AIP Publishing. - 1070-664X .- 1089-7674. ; 31:5
-
Tidskriftsartikel (refereegranskat)abstract
- To improve the plasma performance and control the density and plasma quality during the flat top phase, wall conditioning techniques are used in large fusion devices like W7-X and in JT60-SA. To study the performance of electron cyclotron wall conditioning, numerous experiments were performed on the TOroidally MAgnetized System, which is operated by LPP-ERM/KMS at the FZ-Jülich. It is a facility designed to study plasma production, wall conditioning, and plasma-surface interactions. The produced electron cyclotron resonance heating plasmas are characterized in various conditions by density and temperature measurements using a movable triple Langmuir probe in the horizontal and the vertical direction, complemented by video and spectroscopic data, to obtain a 2D extrapolation of the plasma parameters in the machine. A way to calibrate the triple Langmuir probe measurements is also investigated. These data can be used to determine the direction of the plasma drift in the vessel and identify the power absorption mechanisms. This will give more insight in the plasma behavior and improve the efficiency of wall conditioning and sample exposure experiments.
|
|
3. |
- Buermans, J., et al.
(författare)
-
Study of the Electron cyclotron power deposition in TOMAS
- 2024
-
Ingår i: Physica Scripta. - : IOP Publishing. - 0031-8949 .- 1402-4896. ; 99:8
-
Tidskriftsartikel (refereegranskat)abstract
- Efficient Electron Cyclotron Resonance Heating (ECRH) breakdown and pre-ionization can be achieved with fundamental X-mode, while higher harmonics can introduce excessive stray radiation. Fundamental heating however is characterized by a low cut-off density, introducing additional power absorption mechanisms in the plasma. A good knowledge of these mechanisms is necessary to use fundamental X-mode as an efficient pre-ionization method. Numerous experiments were performed on the TOroidally MAgnetized System (TOMAS) to study the power deposition for ECRH in helium. It is a facility designed to study plasma production, wall conditioning and plasma-surface interactions and is operated by LPP-ERM/KMS at the FZ-J & uuml;lich. The influence of the injected power P EC and the magnetic field B 0 on the absorption mechanisms is examined, in order to reduce stray radiation and improve the absorption efficiency. This will allow to determine the best scenarios for plasma start-up and pre-ionization.
|
|
4. |
- Buermans, J., et al.
(författare)
-
Triple Langmuir probe calibration in TOMAS ECRH plasma
- 2023
-
Ingår i: AIP Advances. - : AIP Publishing. - 2158-3226. ; 13:5
-
Tidskriftsartikel (refereegranskat)abstract
- In the TOMAS device, a triple Langmuir probe is used to measure the electron temperature and density. The accuracy of this measurement depends on correct determination of the effective collecting area of the probe, which depends on complex plasma transport processes. The probe can be calibrated by electron cyclotron resonance heating experiments using the cut-off density of the ordinary wave (O-wave). This threshold only depends on the frequency of the injected wave, and the occurrence of this phenomenon is clearly visible in the temperature evolution. The value of density is consequently known at this point and can be used to calibrate the density measurements of the triple Langmuir probe.
|
|
5. |
- Buermans, Johan, et al.
(författare)
-
X-mode electron cyclotron heating scenarios beyond the cut-off density
- 2023
-
Ingår i: 24th Topical Conference on Radio-Frequency Power in Plasmas. - : AIP Publishing.
-
Konferensbidrag (refereegranskat)abstract
- Electron Cyclotron Heating (ECH) at the fundamental resonance in X-mode is limited by a low cut-off density. Electromagnetic waves cannot propagate in the region between this cut-off and the Upper Hybrid Resonance (UHR) and cannot reach the Electron Cyclotron Resonance (ECR) position. Higher harmonic heating is hence preferred in nowadays ECH plasma heating scenarios to overcome this problem. However, if this evanescent region is small compared to the wavelength of the waves, additional power deposition mechanisms can occur to increase the plasma density. This includes collisional losses in the evanescent region, tunneling of the X-wave with resonant coupling at the ECR, and conversion to the Electron Bernstein Wave (EBW) with resonant coupling. Several ECH plasma production experiments were performed on the TOMAS device with simple toroidal magnetic field to identify these additional heating regimes and to study the influence of the heating power on the ECH plasma parameters and the power deposition. Density and temperature profiles were measured with Langmuir Probes. Measurements of the forwarded and reflected power allow to estimate the coupling efficiency. The results help to understand ECH plasma production for tokamak plasma breakdown assistance and Electron Cyclotron Wall Conditioning (ECWC).
|
|
6. |
- Crombé, K., et al.
(författare)
-
Radio frequency plasma production on the TOMAS device
- 2023
-
Ingår i: 24th Topical Conference on Radio-Frequency Power in Plasmas. - : AIP Publishing.
-
Konferensbidrag (refereegranskat)abstract
- The study of discharge initiation by an Ion Cyclotron Range of Frequency (ICRF) antenna is of importance for operational scenarios at low magnetic field in e.g., ITER and Wendelstein 7-X. At low magnetic fields ohmic breakdown is difficult because of relatively short connection lengths and the electron cyclotron (EC) systems cannot assist because of a low-density cut-off. In that case ion cyclotron (IC) start-up, with waves in the Radio Frequency (RF) wavelength range, can be a good alternative solution. To explore in more detail the processes at play during the initial breakdown phase and to test measurement requirements, the diagnostic's capabilities of the TOMAS experimental device are being enlarged to allow for IC breakdown studies. A first set of IC breakdown experiments has been performed and data was taken by a newly installed spectrometer and a horizontal triple Langmuir probe. Limitations were found in pressure, ICRF power, and hydrogen concentration. Further diagnostic's upgrades and extensions of the experimental sessions will allow for a more complete study in support of modelling and experiments on other machines.
|
|
7. |
|
|
8. |
- Dittrich, Laura, et al.
(författare)
-
Fuel retention and erosion-deposition on inner wall cladding tiles in JET-ILW
- 2021
-
Ingår i: Physica Scripta. - : IOP Publishing. - 0031-8949 .- 1402-4896. ; 96:12
-
Tidskriftsartikel (refereegranskat)abstract
- The morphology of beryllium coatings on the Inconel inner wall cladding tiles after JET-ILW campaigns was determined. The focus was on: (i) fuel retention and its share in the overall fuel inventory; (ii) the change of the layer structure and composition. The study is motivated in the view of planned D-T operation in JET. Four tiles were examined: the initial not exposed; one exposed to two campaigns (ILW1-2) and two facing the plasma during ILW1-3. As determined with ion beam and microscopy methods, the initial Be layer (9.0 mu m thick) contained up to 4-5 at.% of impurities, mainly H, O, C, Ni. In the exposed tiles, the impurity content increases to 14-26 at.% (up to 20 at.% O, 1.7 at.% C, 1.0 at.% N, 1.3 at.% Ni and under 0.1 at.% W). The surface composition indicates gettering of O and a long-term retention of N. The Be thickness on the tile exposed to ILW1-2 was between 7.6 and 9.7 mu m, thus indicating erosion in some areas, while the thickness after ILW1-3 increased to 10-12 mu m. The D content was in the range 1.2-3.4x10(17) cm(-2) after ILW1-2 and 3.2-10x10(17) cm(-2) after ILW1-3 on most of the analyzed area, but in the limiter shadow values up to 58 x10(17) cm(-2) were measured. Taking into account the total area of the Be-coated inner wall cladding tiles, the lower limit of D inventory amounts to 5.3x10(22) atoms corresponding to about 176 mg, i.e. somewhat greater than the amount determined on Be limiters. The formation and spalling-off of Be-O particles was revealed.
|
|
9. |
- Dittrich, Laura, et al.
(författare)
-
Impact of ion irradiation and film deposition on optical and fuel retention properties of Mo polycrystalline and single crystal mirrors
- 2023
-
Ingår i: Nuclear Materials and Energy. - : Elsevier BV. - 2352-1791. ; 37
-
Tidskriftsartikel (refereegranskat)abstract
- Polycrystalline (PC) and single crystal (SC) molybdenum mirrors were irradiated with 98Mo+, 1H+, 4He+, 11B+ and 184W+. Energies were chosen to impact the optically active region (up to 30 nm deep) of Mo mirrors. Some surfaces were coated by magnetron sputtering either with B or W films 4–65 nm thick. The overall objective was to simulate the neutron-induced damage and transmutation (H, He), and the impact of H, He, B, W on the optical performance of test mirrors, and on fuel retention. In parallel, a set of PC Mo mirrors irradiated with 1.6 MeV 98Mo3+ to a damage of 2 dpa and 20 dpa was installed in the JET tokamak for exposure during deuterium-tritium campaigns. Data from spectrophotometric, ion beam and microscopy techniques reveal: (i) the irradiation decreased specular reflectivity, whereby the differences between PC and SC in reflectivity are very small, (ii) He is retained in bubbles within 25–30 nm of the subsurface layer in all irradiated materials, (iii) W, either deposited or implanted, decreases reflectivity, but the strongest reflectivity degradation is caused by B deposition. Laboratory studies show the correlation of damage and H retention. Several cycles of W deposition and its removal from SC-Mo mirrors by plasma-assisted methods were also performed.
|
|
10. |
- Dittrich, Laura, et al.
(författare)
-
Retention of noble and rare isotope gases in plasma-facing components-Experience from the JET tokamak with the ITER-like wall
- 2023
-
Ingår i: Fusion engineering and design. - : Elsevier BV. - 0920-3796 .- 1873-7196. ; 192
-
Tidskriftsartikel (refereegranskat)abstract
- Plasma edge cooling, ion cyclotron wall conditioning and disruption mitigation techniques involve massive gas injection (by puffs or pellets) to the torus. A certain fraction remains in plasma-facing components (PFC) due to co-deposition and implantation. An uncontrolled release/desorption of such retained species affects the stability of plasma operation. The aim of this work was to determine the lateral and depth distribution of noble (3He, 4He, Ne, Ar), seeded (N2, Ne, Ar) and tracer gases (15N, 18O) in PFC retrieved from the JET tokamak with the ITER-Like Wall (JET-ILW) after three experimental campaigns (ILW-1, ILW-2, ILW-3). Results regarding the retention of those gases are shown as well as a comparison to the deuterium retention in the studied areas. Heavy ion elastic recoil detection analysis was used, being the only technique capable of detection and quantitative assessment of all elements, especially low-Z isotopes. Helium was found on the divertor Tile 5, locally up to 44.1015 3He cm-2 and 12.1015 4He cm-2, and on the limiters as well. Neon was found in two positions on the limiters, with up to 10.1015 Ne cm-2 and the 15N tracer on Be limiters exposed to ILW-3. A correlation of N retention with the N seeding rates for each campaign has also been found.
|
|
11. |
- Goriaev, A., et al.
(författare)
-
First studies of local ion fluxes in radio frequency plasmas for ion cyclotron wall conditioning applications in the TOMAS device
- 2023
-
Ingår i: AIP Conference Proceedings. - : American Institute of Physics Inc..
-
Konferensbidrag (refereegranskat)abstract
- To measure the local ion energy distribution functions for support of Ion Cyclotron Wall Conditioning (ICWC) application studies in the TOMAS device, a Semion Retarding Field Energy Analyzer (RFEA) by Impedans Ltd. has been installed in the sample load-lock system. The RFEA system has been commissioned in hydrogen Radio-Frequency (RF) plasmas. The first studies have been performed on the influence of the neutral hydrogen pressure, the input power, the magnetic field and the location on the average ion energy and ion flux density.
|
|
12. |
- Klimešová, Eva, et al.
(författare)
-
Plasma channel formation in NIR laser-irradiated carrier gas from an aerosol nanoparticle injector
- 2019
-
Ingår i: Scientific Reports. - : Springer Science and Business Media LLC. - 2045-2322 .- 2045-2322. ; 9:1
-
Tidskriftsartikel (refereegranskat)abstract
- © 2019, The Author(s). Aerosol nanoparticle injectors are fundamentally important for experiments where container-free sample handling is needed to study isolated nanoparticles. The injector consists of a nebuliser, a differential pumping unit, and an aerodynamic lens to create and deliver a focused particle beam to the interaction point inside a vacuum chamber. The tightest focus of the particle beam is close to the injector tip. The density of the focusing carrier gas is high at this point. We show here how this gas interacts with a near infrared laser pulse (800 nm wavelength, 120 fs pulse duration) at intensities approaching 1016 Wcm−2. We observe acceleration of gas ions to kinetic energies of 100s eV and study their energies as a function of the carrier gas density. Our results indicate that field ionisation by the intense near-infrared laser pulse opens up a plasma channel behind the laser pulse. The observations can be understood in terms of a Coulomb explosion of the created underdense plasma channel. The results can be used to estimate gas background in experiments with the injector and they open up opportunities for a new class of studies on electron and ion dynamics in nanoparticles surrounded by a low-density gas.
|
|
13. |
- Kovtun, Yu, et al.
(författare)
-
Measurement of hydrogen plasma parameters of the combined ECR+RF discharge in the TOMAS facility
- 2023
-
Ingår i: 24TH TOPICAL CONFERENCE ON RADIO-FREQUENCY POWER IN PLASMAS. - : AIP Publishing.
-
Konferensbidrag (refereegranskat)abstract
- The plasma electron density and temperature were measured in hydrogen electron-cyclotron resonance (ECR) plasma and combined ECR + radio-frequency (RF) discharges in the TOMAS facility. The results of ECR and combined ECR+RF discharges studies are compared. With an addition of RF, it is possible to vary the plasma parameters around the values provided by the ECR discharge. The propagation of slow (SW) and fast (FW) waves in hydrogen plasma is analyzed. Depending on the plasma density and the parallel component of the wave vector three cases are possible: SW propagation only, SW and FW simultaneous propagation, and FW propagation only.
|
|
14. |
- Kovtun, Yu., et al.
(författare)
-
Overview of TOMAS plasma diagnostics
- 2023
-
Ingår i: Journal of Instrumentation. - : IOP Publishing. - 1748-0221. ; 18:2
-
Tidskriftsartikel (refereegranskat)abstract
- This paper presents an overview of the TOMAS plasma diagnostics. The Langmuir probe method is employed to measure electron temperature, density and floating potential distributions. Two triple probes (horizontal and vertical distributions) and a single probe (horizontal distribution) are used. The measured plasma parameters by the triple and single probes are compared. The ion and neutral atom flux and energy distribution is respectively characterized with a Residual Field Energy Analyzer and a Time-of-Flight Neutral Particle Ana-lyzer. To determine the elemental/charge content of the plasma, the passive method of time-resolved optical emission spectroscopy is used. The time dependence of the integral flow of plasma emission from the discharge is registered by a photodetector. Using a filter allows the photodetector to measure spectral line intensities. To record a wide variety of plasma events several video diagnostics are used. It includes slow video cameras and one high-speed camera in the visible range including Hα.
|
|
15. |
- López-Rodríguez, D., et al.
(författare)
-
Characterisation of radio frequency plasmas in the upgraded TOMAS device
- 2023
-
Konferensbidrag (refereegranskat)abstract
- To complement wall conditioning research in TOMAS, a characterisation of radio-frequency hydrogen plasmas has been performed using a radially movable triple Langmuir probe. Experimental measurements of electron temperature and density radial profiles at different magnetic field on axis strengths and neutral pressures have been performed. First results of simulations of the radial profiles with the code TOMATOR-1D can qualitatively reproduce the measurements of the diagnostic and may be used to understand the behaviour of the waves inside the plasma.
|
|
16. |
- Oelze, Tim, et al.
(författare)
-
THz streak camera performance for single-shot characterization of XUV pulses with complex temporal structures
- 2020
-
Ingår i: Optics Express. - : OPTICAL SOC AMER. - 1094-4087. ; 28:14, s. 20686-20703
-
Tidskriftsartikel (refereegranskat)abstract
- The THz-field-driven streak camera has proven to be a powerful diagnostic-technique that enables the shot-to-shot characterization of the duration and the arrival time jitter of free electron laser (FEL) pulses. Here we investigate the performance of three computational approaches capable to determine the duration of FEL pulses with complex temporal structures from single-shot measurements of up to three simultaneously recorded spectra. We use numerically simulated FEL pulses in order to validate the accuracy of the pulse length retrieval in average as well as in a single-shot mode. We discuss requirements for the THz field strength in order to achieve reliable results and compare our numerical study with the analysis of experimental data that were obtained at the FEL in Hamburg - FLASH. (C) 2020 Optical Society of America under the terms of the OSA Open Access Publishing Agreement
|
|
17. |
- Rubel, Marek, et al.
(författare)
-
Application of Ion Beam Analysis in Studies of First Wall Materials in Controlled Fusion Devices
- 2022
-
Ingår i: Physics. - : MDPI AG. - 2624-8174. ; 4:1, s. 37-50
-
Tidskriftsartikel (refereegranskat)abstract
- The paper provides a concise overview of ion beam analysis methods and procedures in studies of materials exposed to fusion plasmas in controlled fusion devices with magnetic confinement. An impact of erosion-deposition processes on the morphology of wall materials is presented. In particular, results for deuterium analyses are discussed. Underlying physics, advantages and limitations of methods are addressed. The role of wall diagnostics in studies of material migration and fuel retention is explained. A brief note on research and handling of radioactive and beryllium-contaminated materials is also given.
|
|
18. |
- Wauters, T., et al.
(författare)
-
Isotope removal experiment in JET-ILW in view of T-removal after the 2nd DT campaign at JET
- 2022
-
Ingår i: Physica Scripta. - : IOP Publishing. - 0031-8949 .- 1402-4896. ; 97:4
-
Tidskriftsartikel (refereegranskat)abstract
- A sequence of fuel recovery methods was tested in JET, equipped with the ITER-like beryllium main chamber wall and tungsten divertor, to reduce the plasma deuterium concentration to less than 1% in preparation for operation with tritium. This was also a key activity with regard to refining the clean-up strategy to be implemented at the end of the 2nd DT campaign in JET (DTE2) and to assess the tools that are envisaged to mitigate the tritium inventory build-up in ITER. The sequence began with 4 days of main chamber baking at 320 degrees C, followed by a further 4 days in which Ion Cyclotron Wall Conditioning (ICWC) and Glow Discharge Conditioning (GDC) were applied with hydrogen fuelling, still at 320 degrees C, followed by more ICWC while the vessel cooled gradually from 320 degrees C to 225 degrees C on the 4th day. While baking alone is very efficient at recovering fuel from the main chamber, the ICWC and GDC sessions at 320 degrees C still removed slightly higher amounts of fuel than found previously in isotopic changeover experiments at 200 degrees C in JET. Finally, GDC and ICWC are found to have similar removal efficiency per unit of discharge energy. The baking week with ICWC and GDC was followed by plasma discharges to remove deposited fuel from the divertor. Raising the inner divertor strike point up to the uppermost accessible point allowed local heating of the surfaces to at least 800 degrees C for the duration of this discharge configuration (typically 18 s), according to infra-red thermography measurements. In laboratory thermal desorption measurements, maintaining this temperature level for several minutes depletes thick co-deposit samples of fuel. The fuel removal by 14 diverted plasma discharges is analysed, of which 9, for 160 s in total, with raised inner strike point. The initial D content in these discharges started at the low value of 3%-5%, due to the preceding baking and conditioning sequence, and reduced further to 1%, depending on the applied configuration, thus meeting the experimental target.
|
|
19. |
- Widdowson, Anna, et al.
(författare)
-
Evaluation of tritium retention in plasma facing components during JET tritium operations
- 2021
-
Ingår i: Physica Scripta. - : IOP Publishing. - 0031-8949 .- 1402-4896. ; 96:12
-
Tidskriftsartikel (refereegranskat)abstract
- An assessment of the tritium (T) inventory in plasma facing components (PFC) during JET T and deuterium-tritium (DT) operations is presented based on the most comprehensive ex situ fuel retention data set on JET PFCs from the 2015-2016 ILW3 operating period is presented. The global fuel retention is 4.19 x 10(23) D atoms, 0.19% of injected fuel. The inner divertor remains the region of highest fuel retention (46.5%). The T inventory in PFCs at the end of JET operations is calculated as 7.48 x 10(22) atoms and is informative for accountancy, clean-up efficacy and waste liability assessments. The T accumulation rate at the upper inner divertor during JET DT operations has been used to assess the requirements and frequency of operation of a new laser induced desorption diagnostic to be installed on JET for the final DT experiments in 2023.
|
|
20. |
|
|
21. |
- Wohlin, Claes, et al.
(författare)
-
The success factors powering industry-academia collaboration
- 2011
-
Ingår i: IEEE Software. - : IEEE Computer Society. - 0740-7459 .- 1937-4194. ; 29:2, s. 67-73
-
Tidskriftsartikel (refereegranskat)abstract
- Collaboration between industry and academia supports improvement and innovation in industry and helps to ensure industrial relevance in academic research. This article presents an exploratory study of the factors for successful collaboration between industry and academia in software research.
|
|
22. |
- Wolff, Christian M., et al.
(författare)
-
Perfluorinated Self-Assembled Monolayers Enhance the Stability and Efficiency of Inverted Perovskite Solar Cells
- 2020
-
Ingår i: ACS Nano. - : American Chemical Society (ACS). - 1936-0851 .- 1936-086X. ; 14:2, s. 1445-1456
-
Tidskriftsartikel (refereegranskat)abstract
- Perovskite solar cells are among the most exciting photovoltaic systems as they combine low recombination losses, ease of fabrication, and high spectral tunability. The Achilles heel of this technology is the device stability due to the ionic nature of the perovskite crystal, rendering it highly hygroscopic, and the extensive diffusion of ions especially at increased temperatures. Herein, we demonstrate the application of a simple solution-processed perfluorinated self-assembled monolayer (p-SAM) that not only enhances the solar cell efficiency, but also improves the stability of the perovskite absorber and, in turn, the solar cell under increased temperature or humid conditions. The p-i-n-type perovskite devices employing these SAMs exhibited power conversion efficiencies surpassing 21%. Notably, the best performing devices are stable under standardized maximum power point operation at 85 °C in inert atmosphere (ISOS-L-2) for more than 250 h and exhibit superior humidity resilience, maintaining ∼95% device performance even if stored in humid air in ambient conditions over months (∼3000 h, ISOS-D-1). Our work, therefore, demonstrates a strategy towards efficient and stable perovskite solar cells with easily deposited functional interlayers.
|
|
23. |
- Zayachuk, Y., et al.
(författare)
-
Fuel desorption from JET-ILW materials : assessment of analytical approach and identification of sources of uncertainty and discrepancy
- 2023
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 63:9, s. 096010-
-
Tidskriftsartikel (refereegranskat)abstract
- This work was carried out to identify sources of errors, uncertainties and discrepancies in studies of fuel retention in wall components from the JET tokamak using methods based on thermal desorption. Parallel aims were to establish good practices in measurements and to unify procedures in data handling. A comprehensive program designed for deuterium quantification comprised the definition and preparation of two types of materials (samples of JET limiter Be tiles and deuterium-containing targets produced in the laboratory by magnetron-assisted deposition), their pre-characterization, quantitative analyses of the desorption products in three different thermal desorption spectroscopy systems and a detailed critical comparison of the results. Tritium levels were also determined by several techniques in samples from JET and in tritiated targets manufactured specifically for this research program. Facilities available for studies of Be- and tritium-contaminated materials from JET are presented. Apparatus development, future research options and challenges are discussed.
|
|