1. |
- Andersson, Viktor, 1994, et al.
(author)
-
A Novel Method for On-Line Characterization of Alkali Release and Thermal Stability of Materials Used in Thermochemical Conversion Processes
- 2022
-
In: Energies. - : MDPI AG. - 1996-1073. ; 15:12
-
Journal article (peer-reviewed)abstract
- Alkali metal compounds are released during the thermal conversion of biofuels and fossil fuels and have a major impact on the efficiency of conversion processes. Herein, we describe a novel method for the simultaneous characterization of alkali release and mass loss from materials used in combustion and gasification processes including solid fuels, fluidized bed materials, and catalysts for gas reforming. The method combines the thermogravimetric analysis of selected samples with the on-line measurement of alkali release using a surface ionization detector. The technique builds on the careful treatment of alkali processes during transport from a sample to the downstream alkali monitor including the losses of alkali in the molecular form to hot walls, the formation of nanometer-sized alkali-containing particles during the cooling of exhaust gases, aerosol particle growth, and diffusion losses in sampling tubes. The performance of the setup was demonstrated using biomass samples and fluidized bed material from an industrial process. The emissions of alkali compounds during sample heating and isothermal conditions were determined and related to the simultaneous thermogravimetric analysis. The methodology was concluded to provide new evidence regarding the behavior of alkali in key processes including biomass pyrolysis and gasification and ash interactions with fluidized beds. The implications and further improvements of the technique are discussed.
|
|
2. |
- Ge, Yaxin, 1992
(author)
-
Alkali Release and Effects on Biomass Thermal Conversion Processes
- 2022
-
Doctoral thesis (other academic/artistic)abstract
- High alkali content is an important feature of biomass, and it has a series of implications for thermal conversion processes. This thesis focuses on the release of alkali during various biomass thermal conversion processes, including biomass pyrolysis, char gasification, co-conversion of different types of biomass, and thermal conversion of biomass mixed with fresh and used bed materials. Alkali release is also studied in combination with fuel conversion, to elucidate the underlying relationships. In addition, particle release during steam gasification of char is investigated. The studies were carried out on different reactor scales, ranging from the micro scale to pilot scale. A reliable methodology for simultaneous monitoring of alkali release and sample mass was developed based on the application of a thermogravimetric analyzer in combination with a surface ionization detector (TGA-SID). Using TGA-SID, a significant level of alkali release was observed when wood char conversion approaches completion during CO2 gasification, while the level of alkali release from straw char decreased continuously throughout the process. Alkali migration from straw to wood was observed at temperatures above 600°C during co-pyrolysis, based on online alkali measurements. Positive and negative synergistic effects were observed during the co-gasification at low and high conversions of char, respectively. This is attributed to alkali and silicon migration from the straw to the wood. Fresh bed materials affect wood and straw char gasification reactivities and rates of alkali release, and different bed materials may play different roles. For example, an alkali-containing bed material can enhance char gasification in the initial stage, a Si-containing bed material inhibits char gasification and alkali release at high conversions of char, an Al-containing bed material can inhibit char conversion when the char has a high silicon content, and Mg- and Ca-containing bed materials ensure that alkali persists in releasable form, thus favoring substantial alkali release from the char. Used silicon bed material has a coating layer that is abundant in Ca, Si, K, and Mg. These elements can migrate to the char surface during thermal conversion processes and affect char gasification. In addition, a comprehensive system based on diluters, particle sizers, and SID has been successfully used for particle and alkali measurements in laboratory- and pilot-scale reactors. The laboratory-scale steam gasification system shows that the released levels of alkali and particles significantly increase when char conversion approaches completion. Using steam as the gasifying agent instead of CO2 results in a higher level of alkali release during most of the gasification stage. Aerosol particles are also released during steam gasification, at rates that vary by more than one order of magnitude depending on the char composition. The present study improves our understanding of alkali release, migration, and reaction during biomass thermal conversion processes. The acquired fundamental knowledge can be used for reactor design, co-gasification optimization, and selection of bed materials.
|
|
3. |
- Ge, Yaxin, 1992, et al.
(author)
-
Effects of used bed materials on char gasification : Investigating the role of element migration using online alkali measurements
- 2022
-
In: Fuel processing technology. - : Elsevier. - 0378-3820 .- 1873-7188. ; 238
-
Journal article (peer-reviewed)abstract
- Online alkali measurements using surface ionization are employed to study alkali release during heating of used industrial fluidized bed materials and gasification of biomass-based char and bed material mixtures. The alkali release from the bed materials starts at 820 °C and increases with temperature, the time a bed material has experienced in an industrial process, and in the presence of CO2. Online alkali measurement during heating of char mixed with used bed material shows significant alkali uptake by the char. Complementary SEM-EDS studies confirm the alkali results and indicate that other important inorganic elements including Si, Mg, and Ca also migrate from the bed material to the char. The migration of elements initially enhances alkali release and char reactivity, but significantly reduces both during the final stage of the gasification. The observed effects on char gasification become more pronounced with increasing amount of bed material and increasing time the material experienced in an industrial process. The ash-layer on the used bed material is concluded to play an important role as a carrier of alkali and other active components. The char and bed material systems are closely connected under operational conditions, and their material exchange has important implications for the thermal conversion.
|
|
4. |
- Ge, Yaxin, 1992, et al.
(author)
-
Emission Characteristics of NOx and SO2 during the Combustion of Antibiotic Mycelial Residue
- 2022
-
In: International Journal of Environmental Research and Public Health. - : MDPI AG. - 1661-7827 .- 1660-4601. ; 19:3
-
Journal article (peer-reviewed)abstract
- The antibiotic mycelial residue (AMR) generated from cephalosporin C production is a haz-ardous organic waste, which is usually disposed of by landfilling that causes potential secondary environmental pollution. AMR combustion can be an effective method to treat AMR. In order to develop clean combustion technologies for safe disposal and energy recovery from various AMRs, the emission characteristics of NOx and SO2 from AMR combustion were studied experimentally in this work. It was found that the fuel-N is constituted by 85% protein nitrogen and 15% inorganic nitrogen, and the fuel-S by 78% inorganic sulfur and 22% organic sulfur. Nitrogen oxide emissions mainly occur at the volatile combustion stage when the temperature rises to 400◦C, while the primary sulfur oxide emission appears at the char combustion stage above 400◦C. Increasing the combustion temperature and airflow cause higher NOx emissions. High moisture content in AMR can significantly reduce the NOx emission by lowering the combustion temperature and generating more reducing gases such as CO. For the SO2 emission, the combustion temperature (700 to 900◦C), airflow and AMR water content do not seem to exhibit obvious effects. The presence of CaO significantly inhibits SO2 emission, especially for the SO2 produced during the AMR char combustion because of the good control effect on the direct emission of inorganic SO2. Employing air/fuel staging technologies in combination with in-situ desulfurization by calcium oxide/salts added in the combustor with operation temperatures lower than 900◦C should be a potential technology for the clean disposal of AMRs. © 2022 by the authors. Licensee MDPI, Basel, Switzerland.
|
|
5. |
- Ge, Yaxin, 1992, et al.
(author)
-
Real-time monitoring of alkali release during CO2 gasification of different types of biochar
- 2022
-
In: Fuel. - : Elsevier BV. - 0016-2361 .- 1873-7153. ; 327
-
Journal article (peer-reviewed)abstract
- Potassium and sodium compounds play both positive and negative roles during biomass gasification, but the detailed behavior of alkali metal compounds remain incompletely understood. In this study, alkali release during CO2 gasification of biochar is characterized online with a surface ionization method in combination with thermogravimetric analysis of the char samples undergoing gasification. For wood chars, the alkali release rate follows a slowly decreasing trend as the char conversion proceeds, but increases by up to two orders of magnitude when the conversion approaches completion. In contrast, the alkali release from straw char is 40-50 times higher than observed for wood char and decreases continuously during the whole gasification process. A high temperature and a high CO2 concentration enhance both alkali release and char reactivity. The char preparation method also influences the alkali release from pine char, while the char reactivity is less affected. Alkali release and char reactivity are linked, but other factors including mineral content, surface area and char structure may play important roles for the observed reactivity. The results provide a basis for understanding of alkali behavior during gasification and may help optimize catalytic effects and reduce detrimental issues in biomass gasification.
|
|