| 1. |
- Liu, Zhenhua, et al.
(författare)
-
A Rapid Prototyping Technique for Microfluidics with High Robustness and Flexibility
- 2016
-
Ingår i: Micromachines. - : MDPI AG. - 2072-666X. ; 7:11
-
Tidskriftsartikel (refereegranskat)abstract
- In microfluidic device prototyping, master fabrication by traditional photolithography is expensive and time-consuming, especially when the design requires being repeatedly modified to achieve a satisfactory performance. By introducing a high-performance/cost-ratio laser to the traditional soft lithography, this paper describes a flexible and rapid prototyping technique for microfluidics. An ultraviolet (UV) laser directly writes on the photoresist without a photomask, which is suitable for master fabrication. By eliminating the constraints of fixed patterns in the traditional photomask when the masters are made, this prototyping technique gives designers/researchers the convenience to revise or modify their designs iteratively. A device fabricated by this method is tested for particle separation and demonstrates good properties. This technique provides a flexible and rapid solution to fabricating microfluidic devices for non-professionals at relatively low cost.
|
|
| 2. |
|
|
| 3. |
- Xu, Wenchao, et al.
(författare)
-
Viscosity-difference-induced asymmetric selective focusing for large stroke particle separation
- 2016
-
Ingår i: Microfluidics and Nanofluidics. - : Springer Science and Business Media LLC. - 1613-4982 .- 1613-4990. ; 20:9
-
Tidskriftsartikel (refereegranskat)abstract
- We developed a new approach for particle separation by introducing viscosity difference of the sheath flows to form an asymmetric focusing of sample particle flow. This approach relies on the high-velocity gradient in the asymmetric focusing of the particle flow to generate a lift force, which plays a dominated role in the particle separation. The larger particles migrate away from the original streamline to the side of the higher relative velocity, while the smaller particles remain close to the streamline. Under high-viscosity (glycerol-water solution) and low-viscosity (PBS) sheath flows, a significant large stroke separation between the smaller (1.0 mu m) and larger (9.9 mu m) particles was achieved in a sample microfluidic device. We demonstrate that the flow rate and the viscosity difference of the sheath flows have an impact on the interval distance of the particle separation that affects the collected purity and on the focusing distribution of the smaller particles that affects the collected concentration. The interval distance of 293 mu m (relative to the channel width: 0.281) and the focusing distribution of 112 mu m (relative to the channel width: 0.107) were obtained in the 1042-mu m-width separation area of the device. This separation method proposed in our work can potentially be applied to biological and medical applications due to the wide interval distance and the narrow focusing distribution of the particle separation, by easy manufacturing in a simple device.
|
|
