| 1. |
- Aad, G, et al.
(author)
-
- 2015
-
swepub:Mat__t
|
|
| 2. |
- Joffrin, E., et al.
(author)
-
Overview of the JET preparation for deuterium-tritium operation with the ITER like-wall
- 2019
-
In: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 59:11
-
Research review (peer-reviewed)abstract
- For the past several years, the JET scientific programme (Pamela et al 2007 Fusion Eng. Des. 82 590) has been engaged in a multi-campaign effort, including experiments in D, H and T, leading up to 2020 and the first experiments with 50%/50% D-T mixtures since 1997 and the first ever D-T plasmas with the ITER mix of plasma-facing component materials. For this purpose, a concerted physics and technology programme was launched with a view to prepare the D-T campaign (DTE2). This paper addresses the key elements developed by the JET programme directly contributing to the D-T preparation. This intense preparation includes the review of the physics basis for the D-T operational scenarios, including the fusion power predictions through first principle and integrated modelling, and the impact of isotopes in the operation and physics of D-T plasmas (thermal and particle transport, high confinement mode (H-mode) access, Be and W erosion, fuel recovery, etc). This effort also requires improving several aspects of plasma operation for DTE2, such as real time control schemes, heat load control, disruption avoidance and a mitigation system (including the installation of a new shattered pellet injector), novel ion cyclotron resonance heating schemes (such as the three-ions scheme), new diagnostics (neutron camera and spectrometer, active Alfven eigenmode antennas, neutral gauges, radiation hard imaging systems...) and the calibration of the JET neutron diagnostics at 14 MeV for accurate fusion power measurement. The active preparation of JET for the 2020 D-T campaign provides an incomparable source of information and a basis for the future D-T operation of ITER, and it is also foreseen that a large number of key physics issues will be addressed in support of burning plasmas.
|
|
| 3. |
- Krasilnikov, A., et al.
(author)
-
Evidence of 9 Be + p nuclear reactions during 2ω CH and hydrogen minority ICRH in JET-ILW hydrogen and deuterium plasmas
- 2018
-
In: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 58:2
-
Journal article (peer-reviewed)abstract
- The intensity of 9Be + p nuclear fusion reactions was experimentally studied during second harmonic (2ω CH) ion-cyclotron resonance heating (ICRH) and further analyzed during fundamental hydrogen minority ICRH of JET-ILW hydrogen and deuterium plasmas. In relatively low-density plasmas with a high ICRH power, a population of fast H+ ions was created and measured by neutral particle analyzers. Primary and secondary nuclear reaction products, due to 9Be + p interaction, were observed with fast ion loss detectors, γ-ray spectrometers and neutron flux monitors and spectrometers. The possibility of using 9Be(p, d)2α and 9Be(p, α)6Li nuclear reactions to create a population of fast alpha particles and study their behaviour in non-active stage of ITER operation is discussed in the paper.
|
|
| 4. |
|
|
| 5. |
|
|
| 6. |
|
|
| 7. |
|
|
| 8. |
|
|
| 9. |
|
|
| 10. |
|
|
| 11. |
|
|
| 12. |
|
|
| 13. |
|
|
| 14. |
|
|
| 15. |
|
|
| 16. |
|
|
| 17. |
|
|
| 18. |
|
|
| 19. |
|
|
| 20. |
|
|
| 21. |
|
|
| 22. |
|
|
| 23. |
|
|
| 24. |
-
Overview of the JET results
- 2015
-
In: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 55:10
-
Journal article (peer-reviewed)
|
|
| 25. |
- Aaltonen, T., et al.
(author)
-
Tevatron Combination of Single-Top-Quark Cross Sections and Determination of the Magnitude of the Cabibbo-Kobayashi-Maskawa Matrix Element V-tb
- 2015
-
In: Physical Review Letters. - 0031-9007 .- 1079-7114. ; 115:15
-
Journal article (peer-reviewed)abstract
- We present the final combination of CDF and D0 measurements of cross sections for single-top-quark production in proton-antiproton collisions at a center-of-mass energy of 1.96 TeV. The data correspond to total integrated luminosities of up to 9.7 fb(-1) per experiment. The t-channel cross section is measured to be sigma(t) = 2.25(-0.31)(+0.29) pb. We also present the combinations of the two-dimensional measurements of the s- vs t-channel cross section. In addition, we give the combination of the s + t channel cross section measurement resulting in sigma(s+t) = 3.30(-0.40)(+0.52) pb, without assuming the standard model value for the ratio sigma(s)/sigma(t). The resulting value of the magnitude of the top-to-bottom quark coupling is vertical bar V-tb vertical bar = 1.02(-0.05)(+0.06), corresponding to vertical bar V-tb vertical bar > 0.92 at the 95% C. L.
|
|
| 26. |
- Aaltonen, T., et al.
(author)
-
Tevatron Constraints on Models of the Higgs Boson with Exotic Spin and Parity Using Decays to Bottom-Antibottom Quark Pairs
- 2015
-
In: Physical Review Letters. - 0031-9007 .- 1079-7114. ; 114:15
-
Journal article (peer-reviewed)abstract
- Combined constraints from the CDF and D0 Collaborations on models of the Higgs boson with exotic spin J and parity P are presented and compared with results obtained assuming the standard model value J(P) = 0(+). Both collaborations analyzed approximately 10 fb(-1) of proton-antiproton collisions with a center-of-mass energy of 1.96 TeV collected at the Fermilab Tevatron. Two models predicting exotic Higgs bosons with J(P) = 0(-) and J(P) = 2(+) are tested. The kinematic properties of exotic Higgs boson production in association with a vector boson differ from those predicted for the standard model Higgs boson. Upper limits at the 95% credibility level on the production rates of the exotic Higgs bosons, expressed as fractions of the standard model Higgs boson production rate, are set at 0.36 for both the J(P) = 0(-) hypothesis and the J(P) = 2(+) hypothesis. If the production rate times the branching ratio to a bottom-antibottom pair is the same as that predicted for the standard model Higgs boson, then the exotic bosons are excluded with significances of 5.0 standard deviations and 4.9 standard deviations for the J(P) = 0(-) and J(P) = 2(+) hypotheses, respectively.
|
|
| 27. |
- Meyer, H., et al.
(author)
-
Overview of progress in European medium sized tokamaks towards an integrated plasma-edge/wall solution
- 2017
-
In: Nuclear Fusion. - : Institute of Physics Publishing (IOPP). - 0029-5515 .- 1741-4326. ; 57:10
-
Journal article (peer-reviewed)abstract
- Integrating the plasma core performance with an edge and scrape-off layer (SOL) that leads to tolerable heat and particle loads on the wall is a major challenge. The new European medium size tokamak task force (EU-MST) coordinates research on ASDEX Upgrade (AUG), MAST and TCV. This multi-machine approach within EU-MST, covering a wide parameter range, is instrumental to progress in the field, as ITER and DEMO core/pedestal and SOL parameters are not achievable simultaneously in present day devices. A two prong approach is adopted. On the one hand, scenarios with tolerable transient heat and particle loads, including active edge localised mode (ELM) control are developed. On the other hand, divertor solutions including advanced magnetic configurations are studied. Considerable progress has been made on both approaches, in particular in the fields of: ELM control with resonant magnetic perturbations (RMP), small ELM regimes, detachment onset and control, as well as filamentary scrape-off-layer transport. For example full ELM suppression has now been achieved on AUG at low collisionality with n = 2 RMP maintaining good confinement H-H(98,H-y2) approximate to 0.95. Advances have been made with respect to detachment onset and control. Studies in advanced divertor configurations (Snowflake, Super-X and X-point target divertor) shed new light on SOL physics. Cross field filamentary transport has been characterised in a wide parameter regime on AUG, MAST and TCV progressing the theoretical and experimental understanding crucial for predicting first wall loads in ITER and DEMO. Conditions in the SOL also play a crucial role for ELM stability and access to small ELM regimes.
|
|
| 28. |
- Meyer, H., et al.
(author)
-
Overview of progress in European medium sized tokamaks towards an integrated plasma-edge/wall solution
- 2017
-
In: Nuclear Fusion. - : Institute of Physics Publishing (IOPP). - 0029-5515 .- 1741-4326. ; 57:10
-
Journal article (peer-reviewed)abstract
- Integrating the plasma core performance with an edge and scrape-off layer (SOL) that leads to tolerable heat and particle loads on the wall is a major challenge. The new European medium size tokamak task force (EU-MST) coordinates research on ASDEX Upgrade (AUG), MAST and TCV. This multi-machine approach within EU-MST, covering a wide parameter range, is instrumental to progress in the field, as ITER and DEMO core/pedestal and SOL parameters are not achievable simultaneously in present day devices. A two prong approach is adopted. On the one hand, scenarios with tolerable transient heat and particle loads, including active edge localised mode (ELM) control are developed. On the other hand, divertor solutions including advanced magnetic configurations are studied. Considerable progress has been made on both approaches, in particular in the fields of: ELM control with resonant magnetic perturbations (RMP), small ELM regimes, detachment onset and control, as well as filamentary scrape-off-layer transport. For example full ELM suppression has now been achieved on AUG at low collisionality with n = 2 RMP maintaining good confinement H-H(98,H-y2) approximate to 0.95. Advances have been made with respect to detachment onset and control. Studies in advanced divertor configurations (Snowflake, Super-X and X-point target divertor) shed new light on SOL physics. Cross field filamentary transport has been characterised in a wide parameter regime on AUG, MAST and TCV progressing the theoretical and experimental understanding crucial for predicting first wall loads in ITER and DEMO. Conditions in the SOL also play a crucial role for ELM stability and access to small ELM regimes.
|
|
| 29. |
- Meyer, H.F., et al.
(author)
-
Overview of physics studies on ASDEX Upgrade
- 2019
-
In: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 59:11
-
Research review (peer-reviewed)abstract
- The ASDEX Upgrade (AUG) programme, jointly run with the EUROfusion MST1 task force, continues to significantly enhance the physics base of ITER and DEMO. Here, the full tungsten wall is a key asset for extrapolating to future devices. The high overall heating power, flexible heating mix and comprehensive diagnostic set allows studies ranging from mimicking the scrape-off-layer and divertor conditions of ITER and DEMO at high density to fully non-inductive operation (q 95 = 5.5, ) at low density. Higher installed electron cyclotron resonance heating power 6 MW, new diagnostics and improved analysis techniques have further enhanced the capabilities of AUG. Stable high-density H-modes with MW m-1 with fully detached strike-points have been demonstrated. The ballooning instability close to the separatrix has been identified as a potential cause leading to the H-mode density limit and is also found to play an important role for the access to small edge-localized modes (ELMs). Density limit disruptions have been successfully avoided using a path-oriented approach to disruption handling and progress has been made in understanding the dissipation and avoidance of runaway electron beams. ELM suppression with resonant magnetic perturbations is now routinely achieved reaching transiently . This gives new insight into the field penetration physics, in particular with respect to plasma flows. Modelling agrees well with plasma response measurements and a helically localised ballooning structure observed prior to the ELM is evidence for the changed edge stability due to the magnetic perturbations. The impact of 3D perturbations on heat load patterns and fast-ion losses have been further elaborated. Progress has also been made in understanding the ELM cycle itself. Here, new fast measurements of and E r allow for inter ELM transport analysis confirming that E r is dominated by the diamagnetic term even for fast timescales. New analysis techniques allow detailed comparison of the ELM crash and are in good agreement with nonlinear MHD modelling. The observation of accelerated ions during the ELM crash can be seen as evidence for the reconnection during the ELM. As type-I ELMs (even mitigated) are likely not a viable operational regime in DEMO studies of 'natural' no ELM regimes have been extended. Stable I-modes up to have been characterised using -feedback. Core physics has been advanced by more detailed characterisation of the turbulence with new measurements such as the eddy tilt angle - measured for the first time - or the cross-phase angle of and fluctuations. These new data put strong constraints on gyro-kinetic turbulence modelling. In addition, carefully executed studies in different main species (H, D and He) and with different heating mixes highlight the importance of the collisional energy exchange for interpreting energy confinement. A new regime with a hollow profile now gives access to regimes mimicking aspects of burning plasma conditions and lead to nonlinear interactions of energetic particle modes despite the sub-Alfvénic beam energy. This will help to validate the fast-ion codes for predicting ITER and DEMO.
|
|
| 30. |
- Zhou, XP, et al.
(author)
-
Non-coding variability at the APOE locus contributes to the Alzheimer's risk
- 2019
-
In: Nature communications. - : Springer Science and Business Media LLC. - 2041-1723. ; 10:1, s. 3310-
-
Journal article (peer-reviewed)abstract
- Alzheimer’s disease (AD) is a leading cause of mortality in the elderly. While the coding change of APOE-ε4 is a key risk factor for late-onset AD and has been believed to be the only risk factor in the APOE locus, it does not fully explain the risk effect conferred by the locus. Here, we report the identification of AD causal variants in PVRL2 and APOC1 regions in proximity to APOE and define common risk haplotypes independent of APOE-ε4 coding change. These risk haplotypes are associated with changes of AD-related endophenotypes including cognitive performance, and altered expression of APOE and its nearby genes in the human brain and blood. High-throughput genome-wide chromosome conformation capture analysis further supports the roles of these risk haplotypes in modulating chromatin states and gene expression in the brain. Our findings provide compelling evidence for additional risk factors in the APOE locus that contribute to AD pathogenesis.
|
|
| 31. |
- Patterson, Cc, et al.
(author)
-
Seasonal variation in month of diagnosis in children with type 1 diabetes registered in 23 European centers during 1989-2008 : little short-term influence of sunshine hours or average temperature
- 2015
-
In: Pediatric Diabetes. - : Wiley-Blackwell. - 1399-543X .- 1399-5448. ; 16:8, s. 573-580
-
Journal article (peer-reviewed)abstract
- BACKGROUND: The month of diagnosis in childhood type 1 diabetes shows seasonal variation.OBJECTIVE: We describe the pattern and investigate if year-to-year irregularities are associated with meteorological factors using data from 50 000 children diagnosed under the age of 15 yr in 23 population-based European registries during 1989-2008.METHODS: Tests for seasonal variation in monthly counts aggregated over the 20 yr period were performed. Time series regression was used to investigate if sunshine hour and average temperature data were predictive of the 240 monthly diagnosis counts after taking account of seasonality and long term trends.RESULTS: Significant sinusoidal pattern was evident in all but two small centers with peaks in November to February and relative amplitudes ranging from ±11 to ±38% (median ±17%). However, most centers showed significant departures from a sinusoidal pattern. Pooling results over centers, there was significant seasonal variation in each age-group at diagnosis, with least seasonal variation in those under 5 yr. Boys showed greater seasonal variation than girls, particularly those aged 10-14 yr. There were no differences in seasonal pattern between four 5-yr sub-periods. Departures from the sinusoidal trend in monthly diagnoses in the period were significantly associated with deviations from the norm in average temperature (0.8% reduction in diagnoses per 1 °C excess) but not with sunshine hours.CONCLUSIONS: Seasonality was consistently apparent throughout the period in all age-groups and both sexes, but girls and the under 5 s showed less marked variation. Neither sunshine hour nor average temperature data contributed in any substantial way to explaining departures from the sinusoidal pattern.
|
|
| 32. |
- Frassinetti, Lorenzo, et al.
(author)
-
Effect of nitrogen seeding on the energy losses and on the time scales of the electron temperature and density collapse of type-I ELMs in JET with the ITER-like wall
- 2015
-
In: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 55:2
-
Journal article (peer-reviewed)abstract
- The baseline type-I ELMy H-mode scenario has been re-established in JET with the new tungsten MKII-HD divertor and beryllium on the main wall (hereafter called the ITER-like wall, JET-ILW). The first JET-ILW results show that the confinement is degraded by 20-30% in the baseline scenarios compared to the previous carbon wall JET (JET-C) plasmas. The degradation is mainly driven by the reduction in the pedestal temperature. Stored energies and pedestal temperature comparable to the JET-C have been obtained to date in JET-ILW baseline plasmas only in the high triangularity shape using N-2 seeding. This work compares the energy losses during ELMs and the corresponding time scales of the temperature and density collapse in JET-ILWbaseline plasmas with and without N-2 seeding with similar JET-C baseline plasmas. ELMs in the JET-ILW differ from those with the carbon wall both in terms of time scales and energy losses. The ELM time scale, defined as the time to reach the minimum pedestal temperature soon after the ELM collapse, is similar to 2ms in the JET-ILW and lower than 1 ms in the JET-C. The energy losses are in the range Delta W-ELM/W-ped approximate to 7-12% in the JET-ILWand Delta W-ELM/W-ped approximate to 10-20% in JET-C, and fit relatively well with earlier multi-machine empirical scalings of Delta W-ELM/W-ped with collisionality. The time scale of the ELM collapse seems to be related to the pedestal collisionality. Most of the non-seeded JET-ILW ELMs are followed by a further energy drop characterized by a slower time scale similar to 8-10 ms (hereafter called slow transport events), that can lead to losses in the range Delta W-slow/W-ped approximate to 15-22%, slightly larger than the losses in JET-C. The N-2 seeding in JET-ILW significantly affects the ELMs. The JET-ILW plasmas with N-2 seeding are characterized by ELM energy losses and time scales similar to the JET-C and by the absence of the slow transport events.
|
|
| 33. |
- Leyland, M. J., et al.
(author)
-
The H-mode pedestal structure and its role on confinement in JET with a carbon and metal wall
- 2015
-
In: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 55:1
-
Journal article (peer-reviewed)abstract
- We present the pedestal structure, as determined from the high-resolution Thomson scattering measurements, for a database of low and high triangularity (δ ≈ 0.22-0.39) 2.5 MA, type I ELMy H-mode JET plasmas after the installation of the new ITER-like wall (JET-ILW). The database explores the effect of increasing deuterium fuelling and nitrogen seeding with a view to explain the observed changes in performance (edge and global). The low triangularity JET-ILW plasmas show no significant change in performance and pedestal structure with increasing gas dosing. These results are in good agreement with EPED1 predictions. At high triangularity, for pure deuterium fuelled JET-ILW plasmas, there is a 20-30% reduction in global performance and pressure pedestal height in comparison to JET-C plasmas. This reduction in performance is primarily due to a degradation of the temperature pedestal height. The global performance and pressure pedestal height of JET-ILW plasmas can be partially recovered to that of JET-C plasmas with additional nitrogen seeding (Giroud et al 2013 Nucl. Fusion 53 113025). This observed improvement in performance is predominately due to a significant increase in density pedestal height as well as a small increase in the temperature pedestal height. A key result with increasing deuterium fuelling for JET-ILW plasmas is there is no improvement in pressure pedestal height however the pedestal still widens which is inconsistent with the Δ = 0.076√βpol,ped scaling. Furthermore, a key result with increasing nitrogen seeding is the pressure pedestal widening is due to an increase in the temperature pedestal width whilst the density pedestal shows no clear trend. The comparison of EPED1 predictions with the measurements at high triangularity is complex as, for example, for pure deuterium fuelled plasmas there is very good agreement for the pedestal height but not the width. In addition, current EPED1 runs under-predict the pedestal height and width at high nitrogen seeding for JET-ILW plasmas however further work is required to determine the significance of these deviations. Understanding these deviations is essential as provides an insight to the physical mechanisms governing the pedestal structure and edge performance.
|
|
| 34. |
- Ratynskaia, S., et al.
(author)
-
Interaction of metal dust adhered on castellated substrates with the ELMy H-mode plasmas of ASDEX-Upgrade
- 2018
-
In: Nuclear Fusion. - : IOP PUBLISHING LTD. - 0029-5515 .- 1741-4326. ; 58:10
-
Journal article (peer-reviewed)abstract
- Castellated substrates with adhered micron dust have been exposed in the outer ASDEX-Upgrade divertor to ELMy H-mode discharges. Beryllium proxy (chromium, copper) and refractory metal (tungsten, molybdenum) dust has been deposited on the plasma-facing and plasma-shadowed sides of the monoblocks as well as the bottom of the gaps. Interaction with time-averaged transient heat loads up to 5 MWm(-2) led to dust remobilization, clustering, melting and wetting-induced coagulation. The amount of dust released in the vessel has been quantified and remobilized dust trajectories inferred. Gaps can efficiently trap locally adhered dust, but dust detaching from adjacent monoblocks does not preferentially move inside the gaps implying that they do not constitute a dust accumulation site. Heat transfer simulations of melting events are also reported taking into account heat constriction due to the finite contact area and the presence of surface roughness.
|
|
| 35. |
- Touceda-Gonzalez, M., et al.
(author)
-
Microbial community structure and activity in trace elementcontaminatedsoils phytomanaged by Gentle Remediation Options (GRO)
- 2017
-
In: Environmental Pollution. - : Elsevier. - 0269-7491 .- 1873-6424. ; 231:1, s. 237-251
-
Journal article (peer-reviewed)abstract
- Gentle remediation options (GRO) are based on the combined use of plants, associated microorganisms and soil amendments, which can potentially restore soil functions and quality. We studied the effects of three GRO (aided-phytostabilisation, in situ stabilisation and phytoexclusion, and aided-phytoextraction) on the soil microbial biomass and respiration, the activities of hydrolase enzymes involved in the biogeochemical cycles of C, N, P, and S, and bacterial community structure of trace element contaminated soils (TECS) from six field trials across Europe. Community structure was studied using denaturing gradient gel electrophoresis (DGGE) fingerprinting of Bacteria, α- and β-Proteobacteria, Actinobacteria and Streptomycetaceae, and sequencing of DGGE bands characteristic of specific treatments. The number of copies of genes involved in ammonia oxidation and denitrification were determined by qPCR.Phytomanagement increased soil microbial biomass at three sites and respiration at the Biogeco site (France). Enzyme activities were consistently higher in treated soils compared to untreated soils at the Biogeco site. At this site, microbial biomass increased from 696 to 2352 mg ATP kg−1 soil, respiration increased from 7.4 to 40.1 mg C-CO2 kg−1 soil d−1, and enzyme activities were 2–11-fold higher in treated soils compared to untreated soil. Phytomanagement induced shifts in the bacterial community structure at both, the total community and functional group levels, and generally increased the number of copies of genes involved in the N cycle (nirK, nirS, nosZ, and amoA). The influence of the main soil physico-chemical properties and trace element availability were assessed and eventual site-specific effects elucidated. Overall, our results demonstrate that phytomanagement of TECS influences soil biological activity in the long term.
|
|
