1. |
- Berggren, Magnus, et al.
(author)
-
Ion Electron-Coupled Functionality in Materials and Devices Based on Conjugated Polymers
- 2019
-
In: Advanced Materials. - : Wiley-VCH Verlagsgesellschaft. - 0935-9648 .- 1521-4095. ; 31:22
-
Research review (peer-reviewed)abstract
- The coupling between charge accumulation in a conjugated polymer and the ionic charge compensation, provided from an electrolyte, defines the mode of operation in a vast array of different organic electrochemical devices. The most explored mixed organic ion-electron conductor, serving as the active electrode in these devices, is poly(3,4-ethyelenedioxythiophene) doped with polystyrelensulfonate (PEDOT:PSS). In this progress report, scientists of the Laboratory of Organic Electronics at Linkoping University review some of the achievements derived over the last two decades in the field of organic electrochemical devices, in particular including PEDOT:PSS as the active material. The recently established understanding of the volumetric capacitance and the mixed ion-electron charge transport properties of PEDOT are described along with examples of various devices and phenomena utilizing this ion-electron coupling, such as the organic electrochemical transistor, ionic-electronic thermodiffusion, electrochromic devices, surface switches, and more. One of the pioneers in this exciting research field is Prof. Olle Inganas and the authors of this progress report wish to celebrate and acknowledge all the fantastic achievements and inspiration accomplished by Prof. Inganas all since 1981.
|
|
2. |
- Bernacka Wojcik, Iwona, et al.
(author)
-
Flexible Organic Electronic Ion Pump for Flow-Free Phytohormone Delivery into Vasculature of Intact Plants
- 2023
-
In: Advanced Science. - : WILEY. - 2198-3844. ; 10:14
-
Journal article (peer-reviewed)abstract
- Plant vasculature transports molecules that play a crucial role in plant signaling including systemic responses and acclimation to diverse environmental conditions. Targeted controlled delivery of molecules to the vascular tissue can be a biomimetic way to induce long distance responses, providing a new tool for the fundamental studies and engineering of stress-tolerant plants. Here, a flexible organic electronic ion pump, an electrophoretic delivery device, for controlled delivery of phytohormones directly in plant vascular tissue is developed. The c-OEIP is based on polyimide-coated glass capillaries that significantly enhance the mechanical robustness of these microscale devices while being minimally disruptive for the plant. The polyelectrolyte channel is based on low-cost and commercially available precursors that can be photocured with blue light, establishing much cheaper and safer system than the state-of-the-art. To trigger OEIP-induced plant response, the phytohormone abscisic acid (ABA) in the petiole of intact Arabidopsis plants is delivered. ABA is one of the main phytohormones involved in plant stress responses and induces stomata closure under drought conditions to reduce water loss and prevent wilting. The OEIP-mediated ABA delivery triggered fast and long-lasting stomata closure far away from the delivery point demonstrating systemic vascular transport of the delivered ABA, verified delivering deuterium-labeled ABA.
|
|
3. |
- Blake, Jolie, 1986, et al.
(author)
-
Scalable Reflective Plasmonic Structural Colors from Nanoparticles and Cavity Resonances – the Cyan-Magenta-Yellow Approach
- 2022
-
In: Advanced Optical Materials. - : Wiley. - 2195-1071 .- 2162-7568. ; 10:13
-
Journal article (peer-reviewed)abstract
- Plasmonic metasurfaces for color generation are emerging as important components for next generation display devices. Fabricating bright plasmonic colors economically and via easily scalable methods, however, remains difficult. Here, the authors demonstrate an efficient and scalable strategy based on colloidal lithography to fabricate silver-based reflective metal–insulator–nanodisk plasmonic cavities that provide a cyan-magenta-yellow (CMY) color palette with high relative luminance. With the same basic structure, they exploit different mechanisms to efficiently produce a complete subtractive color palette. Finite-difference time-domain simulations reveal that these mechanisms include gap surface plasmon modes for thin insulators and hybridized modes between disk plasmons and Fabry–Pérot modes for thicker systems. To produce yellow hues, they take advantage of higher-energy gap surface plasmon modes to allow resonance dips in the blue spectral region for comparably large nanodisks, thereby circumventing difficult fabrication of nanodisks less than 80 nm. It is anticipated that incorporation of these strategies can reduce fabrication constraints, produce bright saturated colors, and expedite large-scale production.
|
|
4. |
- Borssén, Magnus, et al.
(author)
-
DNA methylation holds prognostic information in relapsed precursor B-cell acute lymphoblastic leukemia
- 2018
-
In: Clinical Epigenetics. - : BIOMED CENTRAL LTD. - 1868-7083 .- 1868-7075. ; 10
-
Journal article (peer-reviewed)abstract
- Background: Few biological markers are associated with survival after relapse of B-cell precursor acute lymphoblastic leukemia (BCP-ALL). In pediatric T-cell ALL, we have identified promoter-associated methylation alterations that correlate with prognosis. Here, the prognostic relevance of CpG island methylation phenotype (CIMP) classification was investigated in pediatric BCP-ALL patients.Methods: Six hundred and one BCP-ALL samples from Nordic pediatric patients (age 1-18) were CIMP classified at initial diagnosis and analyzed in relation to clinical data.Results: Among the 137 patients that later relapsed, patients with a CIMP-profile (n = 42) at initial diagnosis had an inferior overall survival (pOS(5years) 33%) compared to CIMP+ patients (n = 95, pOS(5years) 65%) (p = 0.001), which remained significant in a Cox proportional hazards model including previously defined risk factors.Conclusion: CIMP classification is a strong candidate for improved risk stratification of relapsed BCP-ALL.
|
|
5. |
- Brooke, Robert, 1989-, et al.
(author)
-
Greyscale and paper electrochromic polymer displays by UV patterning
- 2019
-
In: Polymers. - : MDPI AG. - 2073-4360. ; 11:2
-
Journal article (peer-reviewed)abstract
- Electrochromic devices have important implications as smart windows for energy efficient buildings, internet of things devices, and in low-cost advertising applications. While inorganics have so far dominated the market, organic conductive polymers possess certain advantages such as high throughput and low temperature processing, faster switching, and superior optical memory. Here, we present organic electrochromic devices that can switch between two high-resolution images, based on UV-patterning and vapor phase polymerization of poly(3,4- ethylenedioxythiophene) films. We demonstrate that this technique can provide switchable greyscale images through the spatial control of a UV-light dose. The color space was able to be further altered via optimization of the oxidant concentration. Finally, we utilized a UV-patterning technique to produce functional paper with electrochromic patterns deposited on porous paper, allowing for environmentally friendly electrochromic displays.
|
|
6. |
- Brooke, Robert, et al.
(author)
-
Infrared electrochromic conducting polymer devices
- 2017
-
In: Journal of Materials Chemistry C. - : The Royal Society of Chemistry. - 2050-7526 .- 2050-7534. ; 5:23, s. 5824-5830
-
Journal article (peer-reviewed)abstract
- The conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) is well known for its electrochromic properties in the visible region. Less focus has been devoted to the infrared (IR) wavelength range, although tunable IR properties could enable a wide range of novel applications. As an example, modern day vehicles have thermal cameras to identify pedestrians and animals in total darkness, but road and speed signs cannot be easily visualized by these imaging systems. IR electrochromism could enable a new generation of dynamic road signs that are compatible with thermal imaging, while simultaneously providing contrast also in the visible region. Here, we present the first metal-free flexible IR electrochromic devices, based on PEDOT:Tosylate as both the electrochromic material and electrodes. Lateral electrochromic devices enabled a detailed investigation of the IR electrochromism of thin PEDOT:Tosylate films, revealing large changes in their thermal signature, with effective temperature changes up to 10 [degree]C between the oxidized (1.5 V) and reduced (-1.5 V) states of the polymer. Larger scale (7 [times] 7 cm) vertical electrochromic devices demonstrate practical suitability and showed effective temperature changes of approximately 7 [degree]C, with good optical memory and fast switching (1.9 s from the oxidized state to the reduced state and 3.3 s for the reversed switching). The results are highly encouraging for using PEDOT:Tosylate for IR electrochromic applications.
|
|
7. |
- Brooke, Robert, 1989-, et al.
(author)
-
Infrared electrochromic conducting polymer devices
- 2017
-
In: Journal of Materials Chemistry C. - : Royal Society of Chemistry (RSC). - 2050-7526 .- 2050-7534. ; 5:23, s. 5824-5830
-
Journal article (peer-reviewed)abstract
- The conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) is well known for its electrochromic properties in the visible region. Less focus has been devoted to the infrared (IR) wavelength range, although tunable IR properties could enable a wide range of novel applications. As an example, modern day vehicles have thermal cameras to identify pedestrians and animals in total darkness, but road and speed signs cannot be easily visualized by these imaging systems. IR electrochromism could enable a new generation of dynamic road signs that are compatible with thermal imaging, while simultaneously providing contrast also in the visible region. Here, we present the first metal-free flexible IR electrochromic devices, based on PEDOT:Tosylate as both the electrochromic material and electrodes. Lateral electrochromic devices enabled a detailed investigation of the IR electrochromism of thin PEDOT:Tosylate films, revealing large changes in their thermal signature, with effective temperature changes up to 10 °C between the oxidized (1.5 V) and reduced (-1.5 V) states of the polymer. Larger scale (7 × 7 cm) vertical electrochromic devices demonstrate practical suitability and showed effective temperature changes of approximately 7 °C, with good optical memory and fast switching (1.9 s from the oxidized state to the reduced state and 3.3 s for the reversed switching). The results are highly encouraging for using PEDOT:Tosylate for IR electrochromic applications.
|
|
8. |
- Che, Canyan, 1988-, et al.
(author)
-
Twinning Lignosulfonate with a Conducting Polymer via Counter-Ion Exchange for Large-Scale Electrical Storage
- 2019
-
In: Advanced Sustainable Systems. - : Wiley-VCH Verlag. - 2366-7486. ; 3:9
-
Journal article (peer-reviewed)abstract
- Lignosulfonate (LS) is a large-scale surplus product of the forest and paper industries, and has primarily been utilized as a low-cost plasticizer in making concrete for the construction industry. LS is an anionic redox-active polyelectrolyte and is a promising candidate to boost the charge capacity of the positive electrode (positrode) in redox-supercapacitors. Here, the physical-chemical investigation of how this biopolymer incorporates into the conducting polymer PEDOT matrix, of the positrode, by means of counter-ion exchange is reported. Upon successful incorporation, an optimal access to redox moieties is achieved, which provides a 63% increase of the resulting stored electrical charge by reversible redox interconversion. The effects of pH, ionic strength, and concentrations, of included components, on the polymer–polymer interactions are optimized to exploit the biopolymer-associated redox currents. Further, the explored LS-conducting polymer incorporation strategy, via aqueous synthesis, is evaluated in an up-scaling effort toward large-scale electrical energy storage technology. By using an up-scaled production protocol, integration of the biopolymer within the conducting polymer matrix by counter-ion exchange is confirmed and the PEDOT-LS synthesized through optimized strategy reaches an improved charge capacity of 44.6 mAh g−1.
|
|
9. |
- Chen, Shangzhi, et al.
(author)
-
Redox-tunable structural colour images by UV-patterned conducting polymer nanofilms on metal surfaces
-
Other publication (other academic/artistic)abstract
- Precise manipulation of light-matter interaction has enabled a wide variety of approaches to create bright and vivid structural colours. Techniques utilizing photonic crystals, Fabry-Pérot cavities, plasmonics, or high-refractive index dielectric metasurfaces have been studied for applications ranging from optical coatings to reflective displays. However, complicated fabrication procedures for sub-wavelength nanostructures, limited active areas, and inherent absence of tunability of these approaches significantly impede their further development towards flexible, large-scale, and switchable devices compatible with facile and cost-effective production. Herein, we present a simple and efficient method to generate structural colours based on nanoscale conducting polymer films prepared on metallic surfaces via vapour phase polymerization and ultraviolet (UV) light patterning. Varying the UV dose enables synergistic control of both nanoscale film thickness and polymer permittivity, which generates controllable colours from violet to red. Together with greyscale photomasks this enables fabrication of high-resolution colour images using single exposure steps. We further demonstrate spatiotemporal tuning of the structurally coloured surfaces and images via electrochemical modulation of the polymer redox state. The simple structure, facile fabrication, wide colour gamut, and dynamic colour tuning make this concept competitive for future multi-functional and smart displays.
|
|
10. |
- Chen, Shangzhi, et al.
(author)
-
Tunable Structural Color Images by UV-Patterned Conducting Polymer Nanofilms on Metal Surfaces.
- 2021
-
In: Advanced Materials. - : Wiley. - 0935-9648 .- 1521-4095. ; 33:33
-
Journal article (peer-reviewed)abstract
- Precise manipulation of light-matter interactions has enabled a wide variety of approaches to create bright and vivid structural colors. Techniques utilizing photonic crystals, Fabry-Pérot cavities, plasmonics, or high-refractive-index dielectric metasurfaces have been studied for applications ranging from optical coatings to reflective displays. However, complicated fabrication procedures for sub-wavelength nanostructures, limited active areas, and inherent absence of tunability of these approaches impede their further development toward flexible, large-scale, and switchable devices compatible with facile and cost-effective production. Here, a novel method is presented to generate structural color images based on monochromic conducting polymer films prepared on metallic surfaces via vapor phase polymerization and ultraviolet (UV) light patterning. Varying the UV dose enables synergistic control of both nanoscale film thickness and polymer permittivity, which generates controllable structural colors from violet to red. Together with grayscale photomasks this enables facile fabrication of high-resolution structural color images. Dynamic tuning of colored surfaces and images via electrochemical modulation of the polymer redox state is further demonstrated. The simple structure, facile fabrication, wide color gamut, and dynamic color tuning make this concept competitive for applications like multifunctional displays.
|
|