| 71. |
- Mehta, Vihang, et al.
(författare)
-
A Spatially Resolved Analysis of Star Formation Burstiness by Comparing UV and Hα in Galaxies at z ∼ 1 with UVCANDELS
- 2023
-
Ingår i: Astrophysical Journal. - 0004-637X .- 1538-4357. ; 952:2
-
Tidskriftsartikel (refereegranskat)abstract
- The UltraViolet imaging of the Cosmic Assembly Near-infrared Deep Extragalactic Legacy Survey Fields (UVCANDELS) program provides Hubble Space Telescope (HST)/UVIS F275W imaging for four CANDELS fields. We combine this UV imaging with existing HST/near-IR grism spectroscopy from 3D-HST+AGHAST to directly compare the resolved rest-frame UV and Hα emission for a sample of 979 galaxies at 0.7 < z < 1.5, spanning a range in stellar mass of 108−11.5M⊙. Using a stacking analysis, we perform a resolved comparison between homogenized maps of rest-UV and Hα to compute the average UV-to-Hα luminosity ratio (an indicator of burstiness in star formation) as a function of galactocentric radius. We find that galaxies below stellar mass of ∼109.5M⊙, at all radii, have a UV-to-Hα ratio higher than the equilibrium value expected from constant star formation, indicating a significant contribution from bursty star formation. Even for galaxies with stellar mass ≳109.5M⊙, the UV-to-Hα ratio is elevated toward their outskirts (R/Reff > 1.5), suggesting that bursty star formation is likely prevalent in the outskirts of even the most massive galaxies, but is likely overshadowed by their brighter cores. Furthermore, we present the UV-to-Hα ratio as a function of galaxy surface brightness, a proxy for stellar mass surface density, and find that regions below ∼107.5M⊙ kpc−2 are consistent with bursty star formation, regardless of their galaxy stellar mass, potentially suggesting that local star formation is independent of global galaxy properties at the smallest scales. Last, we find galaxies at z > 1.1 to have bursty star formation, regardless of radius or surface brightness.
|
|
| 72. |
- Mo, Lixin, et al.
(författare)
-
Nano-Silver Ink of High Conductivity and Low Sintering Temperature for Paper Electronics
- 2019
-
Ingår i: Nanoscale Research Letters. - : Springer New York LLC. - 1931-7573 .- 1556-276X. ; 14
-
Tidskriftsartikel (refereegranskat)abstract
- Highly conductive ink with low sintering temperature is important for printed electronics on paper substrate. Silver nanoparticles (Ag NPs) of different average radii ranging from 48 to 176 nm were synthesized by adjusting the Ag+ concentration in the reaction process. The electric resistivity of the Ag NP-based ink film in relation to Ag NP size, sintering temperature, amount of PVP capping agent on Ag NP surface, and morphology evolution of the film during heating process was investigated. It was found that the resistivity of the films reduced very rapidly with increasing particle size due above all to reduced amount of protective agent capping on the Ag NPs. A semi-empirical relationship between the resistivity and the particle size was proposed. With the help of this mathematical expression, one gains both systematic and detailed insight to the resistivity evaluation with regard to the Ag particle size. The optimal electric resistivity of 4.6 μΩ cm was achieved at 140 °C for 10 min which was very close to the resistivity value of bulk Ag (1.58 μΩ cm). Mechanical flexibility of the printed electronics with the Ag NP-based ink on paper substrates was investigated. The prints on the art coated paper exhibited better flexibility compared to that on the photopaper. This might be attributed to the surface coating composition, surface morphology of the paper, and their corresponding ink absorption property. © 2019, The Author(s).
|
|
| 73. |
- Mo, Lixin, et al.
(författare)
-
Silver Nanoparticles Based Ink with Moderate Sintering in Flexible and Printed Electronics
- 2019
-
Ingår i: International Journal of Molecular Sciences. - : MDPI AG. - 1661-6596 .- 1422-0067. ; 20:9
-
Tidskriftsartikel (refereegranskat)abstract
- Printed electronics on flexible substrates has attracted tremendous research interest research thanks its low cost, large area production capability and environmentally friendly advantages. Optimal characteristics of silver nanoparticles (Ag NPs) based inks are crucial for ink rheology, printing, post-print treatment, and performance of the printed electronics devices. In this review, the methods and mechanisms for obtaining Ag NPs based inks that are highly conductive under moderate sintering conditions are summarized. These characteristics are particularly important when printed on temperature sensitive substrates that cannot withstand sintering of high temperature. Strategies to tailor the protective agents capping on the surface of Ag NPs, in order to optimize the sizes and shapes of Ag NPs as well as to modify the substrate surface, are presented. Different (emerging) sintering technologies are also discussed, including photonic sintering, electrical sintering, plasma sintering, microwave sintering, etc. Finally, applications of the Ag NPs based ink in transparent conductive film (TCF), thin film transistor (TFT), biosensor, radio frequency identification (RFID) antenna, stretchable electronics and their perspectives on flexible and printed electronics are presented.
|
|
| 74. |
- Mu, Liwen, et al.
(författare)
-
Enriching Heteroelements in Lignin as Lubricating Additives for Bioionic Liquids
- 2016
-
Ingår i: ACS Sustainable Chemistry and Engineering. - : American Chemical Society (ACS). - 2168-0485. ; 4:7, s. 3877-3887
-
Tidskriftsartikel (refereegranskat)abstract
- Depolymerization and modification of lignin have been achieved simultaneously in a one-pot chemical reaction. Two heteroelement-rich modifiers, imidazol-1-yl phosphonic dichloride and 1H-1,2,4-triazol-1-yl phosphonic dichloride, were selected to react with lignin in this work. The modified lignin (m-lignin) is demonstrated as an effective lubricating additive for [choline][amino acid] ([CH][AA]) bioionic liquids. Different characterization techniques have been utilized to study the lignin depolymerization, reaction between lignin and modifiers and m-lignin/[CH][AA] interaction. The effect of the molecular structure of the modifiers on the rheological and tribological properties of m-lignin/[CH][AA] lubricants was systematically investigated. Density function theory is used to calculate the electronic structure of lignin, m-lignin, and [CH][AA]. The atomic natural charge analysis revealed the most negative charge on nitrogen bonded to a phosphorus atom and the strongest capability of forming hydrogen bonding with [CH][AA]. The introduced nitrogen and phosphorus elements not only increase the hydrogen bonding density in m-lignin/[CH][AA] but also enhance the polarity of the m-lignin, both of which facilitate a strong adhesion of lubricant on a metal surface and thus promote lubrication. A larger fraction of heteroatom groups in m-lignin contributes to a better lubrication property of these lubricants
|
|
| 75. |
- Nilsson, PO, et al.
(författare)
-
Electronic structure of ultrathin Ge layers buried in Si(100)
- 2001
-
Ingår i: Physical Review B. Condensed Matter and Materials Physics. - 1098-0121 .- 1550-235X. ; 64:11
-
Tidskriftsartikel (refereegranskat)abstract
- Ultrathin Ge wetting layers, buried in Si(100), have been investigated by soft x-ray emission spectroscopy. With the assistance of ab initio density functional theory calculations the electronic structure of the layers could be established. In particular Si bulk states, splitted and resonating in the Ge layers, were identified.
|
|
| 76. |
- Pang, Changbao, et al.
(författare)
-
Maximal estimate and integral operators in Bergman spaces with doubling measure
- 2023
-
Ingår i: Proceedings of the American Mathematical Society. - : American Mathematical Society (AMS). - 0002-9939 .- 1088-6826. ; 151:7, s. 2881-2894
-
Tidskriftsartikel (refereegranskat)abstract
- The boundedness of the maximal operator on the upper half-plane pi+ is established. Here pi+ is equipped with a positive Borel measure d omega(y)dx satisfying the doubling property omega ((0, 2t)) <= C omega ((0, t)). This result is connected to the Carleson embedding theorem, which we use to characterize the boundedness and compactness of the Volterra type integral operators on the Bergman spaces Ap omega(pi+).
|
|
| 77. |
- Qian, Yan, et al.
(författare)
-
Quantification for total demethylation potential of environmental samples utilizing the EGFP reporter gene
- 2016
-
Ingår i: Journal of Hazardous Materials. - : Elsevier. - 0304-3894 .- 1873-3336. ; 306, s. 278-285
-
Tidskriftsartikel (refereegranskat)abstract
- Abstract The demethylation potential of pollutants is arguably an innate component of their toxicity in environmental samples. A method was developed for determining the total demethylation potential of food samples (TDQ). The demethylation epigenetic toxicity was determined using the Hep G2 cell line transfected with pEGFP-C3 plasmids containing a methylated promoter of the EGFP reporter gene. The total demethylation potential of the sample extracts (the 5-AZA-CdR demethylation toxic equivalency) can be quantified within one week by using a standard curve of the 5-AZA-CdR demethylation agent. To explore the applicability of TDQ for environmental samples, 17 groundwater samples were collected from heavy polluted Kuihe river and the total demethylation potentials of the sample extracts were measured successfully. Meaningful demethylation toxic equivalencies ranging from 0.00050 to 0.01747 μM were found in all groundwater sample extracts. Among 19 kinds of inorganic substance, As and Cd played important roles for individual contribution to the total demethylation epigenetic toxicity. The TDQ assay is reliable and fast for quantifying the DNA demethylation potential of environmental sample extracts, which may improve epigenetic toxicity evaluations for human risk assessment, and the consistent consuming of groundwater alongside the Kuihe river pose unexpected epigenetic health risk to the local residents.
|
|
| 78. |
- Ren, Xin, et al.
(författare)
-
The hydrological cycle and ocean circulation of the Maritime Continent in the Pliocene : results from PlioMIP2
- 2023
-
Ingår i: Climate of the Past. - 1814-9324 .- 1814-9332. ; 19:10, s. 2053-2077
-
Tidskriftsartikel (refereegranskat)abstract
- The Maritime Continent (MC) forms the western boundary of the tropical Pacific Ocean, and relatively small changes in this region can impact the climate locally and remotely. In the mid-Piacenzian warm period of the Pliocene (mPWP; 3.264 to 3.025 Ma) atmospheric CO2 concentrations were ∼ 400 ppm, and the subaerial Sunda and Sahul shelves made the land–sea distribution of the MC different to today. Topographic changes and elevated levels of CO2, combined with other forcings, are therefore expected to have driven a substantial climate signal in the MC region at this time. By using the results from the Pliocene Model Intercomparison Project Phase 2 (PlioMIP2), we study the mean climatic features of the MC in the mPWP and changes in Indonesian Throughflow (ITF) with respect to the preindustrial. Results show a warmer and wetter mPWP climate of the MC and lower sea surface salinity in the surrounding ocean compared with the preindustrial. Furthermore, we quantify the volume transfer through the ITF; although the ITF may be expected to be hindered by the subaerial shelves, 10 out of 15 models show an increased volume transport compared with the preindustrial.In order to avoid undue influence from closely related models that are present in the PlioMIP2 ensemble, we introduce a new metric, the multi-cluster mean (MCM), which is based on cluster analysis of the individual models. We study the effect that the choice of MCM versus the more traditional analysis of multi-model mean (MMM) and individual models has on the discrepancy between model results and data. We find that models, which reproduce modern MC climate well, are not always good at simulating the mPWP climate anomaly of the MC. By comparing with individual models, the MMM and MCM reproduce the preindustrial sea surface temperature (SST) of the reanalysis better than most individual models and produce less discrepancy with reconstructed sea surface temperature anomalies (SSTA) than most individual models in the MC. In addition, the clusters reveal spatial signals that are not captured by the MMM, so that the MCM provides us with a new way to explore the results from model ensembles that include similar models.
|
|
| 79. |
- Sattari, Zahra, et al.
(författare)
-
Fraction of Clumpy Star-forming Galaxies at 0.5 ≤ z ≤ 3 in UVCANDELS : Dependence on Stellar Mass and Environment
- 2023
-
Ingår i: Astrophysical Journal. - 0004-637X .- 1538-4357. ; 951:2
-
Tidskriftsartikel (refereegranskat)abstract
- High-resolution imaging of galaxies in rest-frame UV has revealed the existence of giant star-forming clumps prevalent in high-redshift galaxies. Studying these substructures provides important information about their formation and evolution and informs theoretical galaxy evolution models. We present a new method to identify clumps in galaxies' high-resolution rest-frame UV images. Using imaging data from CANDELS and UVCANDELS, we identify star-forming clumps in an HST/F160W ≤ 25 AB mag sample of 6767 galaxies at 0.5 ≤ z ≤ 3 in four fields, GOODS-N, GOODS-S, EGS, and COSMOS. We use a low-passband filter in Fourier space to reconstruct the background image of a galaxy and detect small-scale features (clumps) on the background-subtracted image. Clumpy galaxies are defined as those having at least one off-center clump that contributes a minimum of 10% of the galaxy's total rest-frame UV flux. We measure the fraction of clumpy galaxies (fclumpy) as a function of stellar mass, redshift, and galaxy environment. Our results indicate that fclumpy increases with redshift, reaching ∼65% at z ∼ 1.5. We also find that fclumpy in low-mass galaxies () is 10% higher compared to that of their high-mass counterparts (). Moreover, we find no evidence of significant environmental dependence of fclumpy for galaxies at the redshift range of this study. Our results suggest that the fragmentation of gas clouds under violent disk instability remains the primary driving mechanism for clump formation, and incidents common in dense environments, such as mergers, are not the dominant processes.
|
|
| 80. |
- Schubert, Kaja, et al.
(författare)
-
The electronic structure and deexcitation pathways of an isolated metalloporphyrin ion resolved by metal L-edge spectroscopy
- 2021
-
Ingår i: Chemical Science. - : Royal Society of Chemistry (RSC). - 2041-6520 .- 2041-6539. ; 12:11, s. 3966-3976
-
Tidskriftsartikel (refereegranskat)abstract
- The local electronic structure of the metal-active site and the deexcitation pathways of metalloporphyrins are crucial for numerous applications but difficult to access by commonly employed techniques. Here, we applied near-edge X-ray absorption mass spectrometry and quantum-mechanical restricted active space calculations to investigate the electronic structure of the metal-active site of the isolated cobalt(iii) protoporphyrin IX cation (CoPPIX+) and its deexcitation pathways upon resonant absorption at the cobalt L-edge. The experiments were carried out in the gas phase, thus allowing for control over the chemical state and molecular environment of the metalloporphyrin. The obtained mass spectra reveal that resonant excitations of CoPPIX+at the cobalt L3-edge lead predominantly to the formation of the intact radical dication and doubly charged fragments through losses of charged and neutral side chains from the macrocycle. The comparison between experiment and theory shows that CoPPIX+is in a3A2gtriplet ground state and that competing excitations to metal-centred non-bonding and antibonding σ* molecular orbitals lead to distinct deexcitation pathways.
|
|
