| 1. |
- Ding, Xin, et al.
(författare)
-
Artificial photosynthesis : A two-electrode photoelectrochemical cell for light driven water oxidation with molecular components
- 2014
-
Ingår i: Electrochimica Acta. - : Elsevier BV. - 0013-4686 .- 1873-3859. ; 149, s. 337-340
-
Tidskriftsartikel (refereegranskat)abstract
- An efficient two-electrode molecular PEC was assembled, in which a photoanode was constructed using a co-adsorbed method with a molecular photosensitizer (PS) 1 and a molecular catalyst 2 on TiO2-sintered FTO electrode (TiO2(1 + 2)). Without applied bias against a reference electrode, the system achieves remarkable photocurrent densities and carries out light driven water oxidation as evidenced by Clark electrode measurements in solution. A photocurrent density of 70 mA/cm(2) has been obtained within 10 s illumination time, and a TON of about 220 was obtained with a maximum turnover frequency (TOF) of ca. 4 min(-1) within the initial 5 minutes illumination duration.
|
|
| 2. |
- Ding, Xin, et al.
(författare)
-
Assembling Supramolecular Dye-Sensitized Photoelectrochemical Cells for Water Splitting
- 2015
-
Ingår i: ChemSusChem. - : Wiley-VCH Verlagsgesellschaft. - 1864-5631 .- 1864-564X. ; 8:23, s. 3992-3995
-
Tidskriftsartikel (refereegranskat)abstract
- The method used to assemble dye-sensitized photoelectrochemical (DS-PEC) devices plays a vital role in determining its photoactivity and stability. We report a simple and effective method to assemble supramolecular DS-PECs introducing PMMA as support material and a catalyst modified with long carbon chains as photoanodes. The long carbon chains in combination with PMMA allow to better immobilize the catalyst. DS-PECs obtained by this simple method have display excellent photoactivities and stabilities. A photocurrent density of 1.1mAcm(-2) and a maximum IPCE of 9.5% have been obtained with a 0.2V vs NHE external bias.
|
|
| 3. |
- Ding, Xin, et al.
(författare)
-
Silicon Compound Decorated Photoanode for Performance Enhanced Visible Light Driven Water Splitting
- 2016
-
Ingår i: Electrochimica Acta. - : Elsevier. - 0013-4686 .- 1873-3859. ; 215, s. 682-688
-
Tidskriftsartikel (refereegranskat)abstract
- An efficient dye (1) sensitized photoelectrochemical cell (DS-PEC) has been assembled with a silicon compound (3-chloropropyl) trimethoxy-silane (Si-Cl) decorated working electrode (WE) TiO2(1 + 2). The introduction of this Si-Cl molecule on photoanode leads to better performances on efficiency than untreated ones for light driven water splitting. The firm Si-O layer formed on TiO2 increased the resistance of the TiO2/catalyst interface which is assumed to decrease charge recombination from TiO2 to the oxidized catalyst 2. The work presented here provides an effective method to improve the performances of DS-PECs.
|
|
| 4. |
- Ding, Xin, et al.
(författare)
-
Visible Light-Driven Water Splitting in Photoelectrochemical Cells with Supramolecular Catalysts on Photoanodes
- 2014
-
Ingår i: ACS Catalysis. - : American Chemical Society (ACS). - 2155-5435 .- 2155-5435. ; 4:7, s. 2347-2350
-
Tidskriftsartikel (refereegranskat)abstract
- By using a supramolecular self-assembly method, a functional water splitting device based on a photoactive anode TiO2(1+2) has been successfully assembled with a molecular photosensitizer 1 and a molecular catalyst 2 connected by coordination of 1 and 2 with Zr4+ ions on the surface of nanostructured TiO2. On the basis of this photoanode in a three-electrode photoelectrochemical cell, a maximal incident photon to current conversion efficiency of 4.1% at similar to 450 nm and a photocurrent density of similar to 0.48 mA cm(-2) were successfully obtained.
|
|
| 5. |
- Gao, Yan, et al.
(författare)
-
Artificial photosynthesis : photosensitizer/catalyst supramolecular assemblies for light driven water oxidation
- 2014
-
Ingår i: Faraday discussions. - : Royal Society of Chemistry (RSC). - 1359-6640 .- 1364-5498. ; 176, s. 225-232
-
Tidskriftsartikel (refereegranskat)abstract
- Three new supramolecular assemblies SA1-SA3 with different linkages between the photosensitizer and catalyst have been synthesized for light driven water oxidation. With flexible -CH2-CH2- chains as the linkage, the assembly SA3 displays the best performance for photocatalytic water oxidation compared with the other two assemblies, a turnover number of 34 has been obtained based on the molecular assembly SA3 in a homogeneous system. This type of assembly connected with flexible linkages represents suitable candidates to construct photoanodes for light driven water splitting in dye sensitized photoelectrochemical devices.
|
|
| 6. |
- Gao, Yan, et al.
(författare)
-
Artificial photosynthesis - functional devices for light driven water splitting with photoactive anodes based on molecular catalysts
- 2014
-
Ingår i: Physical Chemistry, Chemical Physics - PCCP. - : Royal Society of Chemistry (RSC). - 1463-9076 .- 1463-9084. ; 16:24, s. 12008-12013
-
Tidskriftsartikel (refereegranskat)abstract
- Photoactive anodes consisting of Ru(bpy)(3) type photosensitizer 1 and molecular catalysts 2 and 3 on nanostructured TiO2 have been assembled in functional devices for successful light driven water splitting. From their performance measurements we found that the photoanode TiO2(1 + 3) in which the molecular ruthenium catalyst and the phosphonate anchoring group are linked by a flexible -CH(2)CH(2)CH(2)chain showed a significantly higher photocurrent density than the photoanode TiO2(1 + 2) with only -CH2- linkage. The possible reasons for the different water splitting performance of otherwise identical devices are discussed.
|
|
| 7. |
- Gao, Yan, et al.
(författare)
-
Visible Light Driven Water Splitting in a Molecular Device with Unprecedentedly High Photocurrent Density
- 2013
-
Ingår i: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 0002-7863 .- 1520-5126. ; 135:11, s. 4219-4222
-
Tidskriftsartikel (refereegranskat)abstract
- A molecular water oxidation catalyst (2) has been synthesized and immobilized together with a molecular photosensitizer (1) on nanostructured TiO2 particles on FTO conducting glass, forming a photoactive anode (TiO2(1+2)). By using the TiO2(1+2) as working electrode in a three-electrode photoelectrochemical cell (PEC), visible light driven water splitting has been successfully demonstrated in a phosphate buffer solution (pH 6.8), with oxygen and hydrogen bubbles evolved respectively from the working electrode and counter electrode. By applying 0.2 V external bias vs NHE, a high photocurrent density of more than 1.7 rnA.cm(-2) has been achieved. This value is higher than any PEC devices with molecular components reported in literature.
|
|
| 8. |
- Zhang, Linlin, et al.
(författare)
-
High-Performance Photoelectrochemical Cells Based on a Binuclear Ruthenium Catalyst for Visible-Light-Driven Water Oxidation
- 2014
-
Ingår i: ChemSusChem. - : Wiley. - 1864-5631 .- 1864-564X. ; 7:10, s. 2801-2804
-
Tidskriftsartikel (refereegranskat)abstract
- Two photoanodes based on a binuclear (2) and a mononuclear ruthenium (3) water oxidation catalysts were assembled in combination with a molecular photosensitizer (1) by using a co-adsorption method. The anodes were used in dye-sensitized photoelectrochemical cells (DS-PECs) for visible-light-driven water splitting. A DS-PEC device using TiO2(1+2) as working electrode (WE) exhibits better performance than TiO2(1+3) as WE in light-driven water splitting. Detailed photoelectrochemical studies on these DS-PEC devices are discussed.
|
|
