Sökning: onr:"swepub:oai:DiVA.org:bth-15095" >
Anisotropic Elastic...
-
Kroon, MartinLinnéuniversitetet,Institutionen för maskinteknik (MT),Linnaeus University, SWE
(författare)
Anisotropic Elastic-Viscoplastic Properties at Finite Strains of Injection-Moulded Low-Density Polyethylene
- Artikel/kapitelEngelska2018
Förlag, utgivningsår, omfång ...
-
2017-08-18
-
Springer New York LLC,2018
-
electronicrdacarrier
Nummerbeteckningar
-
LIBRIS-ID:oai:DiVA.org:bth-15095
-
https://urn.kb.se/resolve?urn=urn:nbn:se:bth-15095URI
-
https://doi.org/10.1007/s11340-017-0322-yDOI
-
https://urn.kb.se/resolve?urn=urn:nbn:se:mau:diva-2677URI
-
https://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-68972URI
Kompletterande språkuppgifter
-
Språk:engelska
-
Sammanfattning på:engelska
Ingår i deldatabas
Klassifikation
-
Ämneskategori:ref swepub-contenttype
-
Ämneskategori:art swepub-publicationtype
Anmärkningar
-
Open access
-
Injection-moulding is one of the most common manufacturing processes used for polymers. In many applications, the mechanical properties of the product is of great importance. Injection-moulding of thin-walled polymer products tends to leave the polymer structure in a state where the mechanical properties are anisotropic, due to alignment of polymer chains along the melt flow direction. The anisotropic elastic-viscoplastic properties of low-density polyethylene, that has undergone an injection-moulding process, are therefore examined in the present work. Test specimens were punched out from injection-moulded plates and tested in uniaxial tension. Three in-plane material directions were investigated. Because of the small thickness of the plates, only the in-plane properties could be determined. Tensile tests with both monotonic and cyclic loading were performed, and the local strains on the surface of the test specimens were measured using image analysis. True stress vs. true strain diagrams were constructed, and the material response was evaluated using an elastic-viscoplasticity law. The components of the anisotropic compliance matrix were determined together with the direction-specific plastic hardening parameters. © 2017 The Author(s)
Ämnesord och genrebeteckningar
Biuppslag (personer, institutioner, konferenser, titlar ...)
-
Andreasson, EskilBlekinge Tekniska Högskola,Institutionen för maskinteknik,Tetra Pak, Sweden;Blekinge Institute of Technology, Sweden(Swepub:bth)esk
(författare)
-
Persson Jutemar, ElinTetra Pak AB, SWE,Tetra Pak, Sweden
(författare)
-
Petersson, ViktorTetra Pak AB, SWE,Tetra Pak, Sweden
(författare)
-
Persson, LeoTetra Pak AB, SWE,Tetra Pak, Sweden
(författare)
-
Dorn, Michael,1978-Linnéuniversitetet,Institutionen för byggteknik (BY),Linnaeus University, SWE(Swepub:lnu)midoaa
(författare)
-
Olsson, Pär A T,1981-Malmö universitet,Institutionen för materialvetenskap och tillämpad matematik (MTM),Malmö University, Sweden,Malmö högskola, SWE(Swepub:mau)tspaol
(författare)
-
LinnéuniversitetetInstitutionen för maskinteknik (MT)
(creator_code:org_t)
Sammanhörande titlar
-
Ingår i:Experimental mechanics: Springer New York LLC58:1, s. 75-860014-48511741-2765
Internetlänk
Hitta via bibliotek
Till lärosätets databas