SwePub
Sök i LIBRIS databas

  Utökad sökning

onr:"swepub:oai:DiVA.org:liu-99841"
 

Sökning: onr:"swepub:oai:DiVA.org:liu-99841" > Fatigue Strength of...

  • Lundberg, MattiasLinköpings universitet,Konstruktionsmaterial,Tekniska högskolan (författare)

Fatigue Strength of Machined and Shot Peened Grey Cast Iron : Influence of Graphite Morphology

  • BokEngelska2013

Förlag, utgivningsår, omfång ...

  • 2013
  • printrdacarrier

Nummerbeteckningar

  • LIBRIS-ID:oai:DiVA.org:liu-99841
  • https://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-99841URI

Kompletterande språkuppgifter

  • Språk:engelska
  • Sammanfattning på:engelska

Ingår i deldatabas

Klassifikation

  • Ämneskategori:vet swepub-contenttype
  • Ämneskategori:ovr swepub-publicationtype

Anmärkningar

  • A common opinion is that cast iron, especially grey cast iron, is not as notch sensitive as steel and has therefore not been treated by shot peening to suppress crack initiation. For a heterogeneous material that also is brittle, just like grey cast iron, the shot peening parameters needed to induce beneficial surface residual stresses can be problematic to identify. Fatigue testing under uniaxial loading with an R value of -1, on mechanically polished and shot peened specimens, has been performed to determine the fatigue strength at 107 cycles as well as complete Wöhler-curves. Two different types of specimen geometries were tested, one smooth and one notched specimen having kt equal to 1.05 resp. 1.33. With large shots and high peening intensity (heavy shot peening) the fatigue strength clearly decreased whereas small shots and low peening intensity (gentle shot peening) might have lowered the fatigue strength. A short annealing at 285° after gentle shot peening increased the fatigue strength. The results are discussed and explained based on x-ray diffraction measurements, i.e. residual stress and full width at half maximum profiles, as well as microstructural investigations using scanning electron microscope (SEM).

Ämnesord och genrebeteckningar

Biuppslag (personer, institutioner, konferenser, titlar ...)

  • Peng, RuLinköpings universitet,Konstruktionsmaterial,Tekniska högskolan(Swepub:liu)rupe37 (författare)
  • Ahmad, MaqsoodBase Engine & Materials Technology, Volvo Powertrain, Gothenburg, Sweden (författare)
  • Bäckström, DanielTesting Methods and Testing, Scania CV AB, Södertälje, Sweden (författare)
  • Vuoristo, TainaTesting Methods and Testing, Scania CV AB, Södertälje, Sweden (författare)
  • Johansson, StenLinköpings universitet,Konstruktionsmaterial,Tekniska högskolan(Swepub:liu)stejo02 (författare)
  • Linköpings universitetKonstruktionsmaterial (creator_code:org_t)

Internetlänk

Till lärosätets databas

Sök utanför SwePub

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy