Particle formation during pressurized entrained flow gasification of wood powder : Effects of process conditions on chemical composition, nanostructure, and reactivity

• The influence of operating condition on particle formation during pressurized, oxygen blown gasification of wood powder with an ash content of 0.4 wt% was investigated. The investigation was performed with a pilot scale gasifier operated at 7 bar(a). Two loads, 400 and 600 kW were tested, with the oxygen equivalence ratio (λ) varied between 0.25 and 0.50. Particle concentration and mass size distribution was analyzed with a low pressure cascade impactor and the collected particles were characterized for morphology, elemental composition, nanostructure, and reactivity using scanning electron microscopy/high resolution transmission electron microscopy/energy dispersive spectroscopy, and thermogravimetric analysis. In order to quantify the nanostructure of the particles and identify prevalent sub-structures, a novel image analysis framework was used. It was found that the process temperature, affected both by λ and the load of the gasifier, had a significant influence on the particle formation processes. At low temperature (1060 °C), the formed soot particles seemed to be resistant to the oxidation process; however, when the oxidation process started at 1119 °C, the internal burning of the more reactive particle core began. A further increase in temperature (> 1313 °C) lead to the oxidation of the less reactive particle shell. When the shell finally collapsed due to severe oxidation, the original soot particle shape and nanostructure also disappeared and the resulting particle could not be considered as a soot anymore. Instead, the particle shape and nanostructure at the highest temperatures (> 1430 °C) were a function of the inorganic content and of the inorganic elements the individual particle consisted of. All of these effects together lead to the soot particles in the real gasifier environment having less and less ordered nanostructure and higher and higher reactivity as the temperature increased; i.e., they followed the opposite trend of what is observed during laboratory-scale studies with fuels not containing any ash-forming elements and where the temperature was not controlled by λ.

Ämnesord

TEKNIK OCH TEKNOLOGIER  -- Kemiteknik (hsv//swe)

ENGINEERING AND TECHNOLOGY  -- Chemical Engineering (hsv//eng)

TEKNIK OCH TEKNOLOGIER  -- Maskinteknik -- Energiteknik (hsv//swe)

ENGINEERING AND TECHNOLOGY  -- Mechanical Engineering -- Energy Engineering (hsv//eng)

TEKNIK OCH TEKNOLOGIER  -- Maskinteknik (hsv//swe)

ENGINEERING AND TECHNOLOGY  -- Mechanical Engineering (hsv//eng)

TEKNIK OCH TEKNOLOGIER  -- Naturresursteknik (hsv//swe)

ENGINEERING AND TECHNOLOGY  -- Environmental Engineering (hsv//eng)

TEKNIK OCH TEKNOLOGIER  -- Annan teknik (hsv//swe)

ENGINEERING AND TECHNOLOGY  -- Other Engineering and Technologies (hsv//eng)

Nyckelord

Biomass

Gasification

HRTEM

Nanostructure

Soot

Dust

Electron microscopy

High resolution transmission electron microscopy

Internal oxidation

Meteorological instruments

Nanostructures

Oxidation

Oxidation resistance

Scanning electron microscopy

Temperature

Thermogravimetric analysis

Transmission electron microscopy

Elemental compositions

Mass size distribution

Ordered nanostructures

Particle concentrations

Particle formation process

Pressurized entrained flow gasification

Reactive particle shells

Particle size analysis

fuel

inorganic compound

nanomaterial

oxygen

Article

ash

chemical composition

chemical structure

combustion

crystallization

gas flow

heat loss

high temperature

image analysis

partial pressure

particle size

particulate matter

powder

priority journal

solid

thermal analysis

thermodynamics

thermostability

wood

Energiteknik

Publikations- och innehållstyp

ref (ämneskategori)

art (ämneskategori)