Sökning: onr:"swepub:oai:lup.lub.lu.se:818b6352-5193-4ff6-83af-e456e815420e" >
Shape optimization ...
Shape optimization of buckling-based deployable stiff structures
-
- Lee, Ho Min (författare)
- Lund University,Hanyang University
-
- Yoon, Gil Ho (författare)
- Hanyang University
-
- Engqvist, Jonas (författare)
- Lund University,Lunds universitet,Hållfasthetslära,Institutionen för byggvetenskaper,Institutioner vid LTH,Lunds Tekniska Högskola,Solid Mechanics,Department of Construction Sciences,Departments at LTH,Faculty of Engineering, LTH
-
visa fler...
-
- Ristinmaa, Matti (författare)
- Lund University,Lunds universitet,Hållfasthetslära,Institutionen för byggvetenskaper,Institutioner vid LTH,Lunds Tekniska Högskola,Solid Mechanics,Department of Construction Sciences,Departments at LTH,Faculty of Engineering, LTH
-
- Wallin, Mathias (författare)
- Lund University,Lunds universitet,Hållfasthetslära,Institutionen för byggvetenskaper,Institutioner vid LTH,Lunds Tekniska Högskola,Solid Mechanics,Department of Construction Sciences,Departments at LTH,Faculty of Engineering, LTH
-
visa färre...
-
(creator_code:org_t)
- 2024
- 2024
- Engelska.
-
Ingår i: Mechanism and Machine Theory. - 0094-114X. ; 195
- Relaterad länk:
-
http://dx.doi.org/10... (free)
-
visa fler...
-
https://lup.lub.lu.s...
-
https://doi.org/10.1...
-
visa färre...
Abstract
Ämnesord
Stäng
- This study considers deployable structures and presents a novel optimization method that aims to improve the stiffness at the fully deployed state. The considered structures consist of curved beams that deploy through buckling when rotated. The optimization aims to maximize the structural tangent stiffness by modifying the shape of the beam elements. To accurately predict the deformation, Finite Element Method (FEM) simulations were conducted. A design with an increase of up to 19.6% in structural tangent stiffness was achieved, while conserving the structural volume. The approach is validated by manufacturing the deployable structures using laser cutting and performing compression tests. Experimental results show consistency within a 5% range with the optimization results. These findings support the implementation of the optimization scheme for achieving optimum structural designs of deployable structures.
Ämnesord
- TEKNIK OCH TEKNOLOGIER -- Maskinteknik -- Teknisk mekanik (hsv//swe)
- ENGINEERING AND TECHNOLOGY -- Mechanical Engineering -- Applied Mechanics (hsv//eng)
Nyckelord
- Buckling-induced deployment
- Deployable structure
- Shape optimization
- Tangent stiffness
Publikations- och innehållstyp
- art (ämneskategori)
- ref (ämneskategori)
Hitta via bibliotek
Till lärosätets databas