Sökning: WFRF:(Rashid Farhan Lafta) >
Optimizing Reverse ...
Optimizing Reverse Osmosis Feed Spacer Design for Enhanced Dimethylphenol Removal from Wastewater: A Study of Hydrodynamics and Performance Indicators
-
- Al-Obaidi, Mudhar A. (författare)
- Technical Institute of Baquba, Middle Technical University, Baquba 32001, Iraq;Technical Instructor Training Institute, Middle Technical University, Baghdad 10074, Iraq
-
- Rashid, Farhan Lafta (författare)
- Petroleum Engineering Department, College of Engineering, University of Kerbala, Karbala 56001, Iraq
-
- Ameen, Arman, 1976- (författare)
- Högskolan i Gävle,Energisystem och byggnadsteknik
-
visa fler...
-
- Kadhom, Mohammed (författare)
- Department of Environmental Science, College of Energy and Environmental Science, Al-Karkh University of Science, Baghdad 10081, Iraq
-
- Mujtaba, Iqbal M. (författare)
- Department of Chemical Engineering, Faculty of Engineering and Informatics, University of Bradford, Bradford BD7 1DP, UK
-
visa färre...
-
(creator_code:org_t)
- MDPI, 2024
- 2024
- Engelska.
-
Ingår i: Water. - : MDPI. - 2073-4441. ; 16:6
- Relaterad länk:
-
https://doi.org/10.3...
-
visa fler...
-
https://hig.diva-por... (primary) (Raw object)
-
https://urn.kb.se/re...
-
https://doi.org/10.3...
-
visa färre...
Abstract
Ämnesord
Stäng
- Due to its high pollutant rejection and low energy usage, the spiral wound module of reverse osmosis (RO) process is the most commonly used technology utilised in wastewater treatment. For a spiral wound module, the presence of a feed spacer is important as a key solution to mitigate the concentration polarisation phenomenon, due to disorderly fluid flow, and to improve the mass transfer coefficient. Undoubtedly, improvements in the spiral wound module design, mainly in the symmetrical shape of the feed spacer, can have a significant impact on the cost and probable use of these modules. Despite the wide interest in appraising the impact of feed spacer geometry and orientation on the performance of a spiral wound module for RO process-based water desalination, the hydrodynamics of feed spacers (pressure drop and mass transfer coefficient) and the associated influences of feed spacer design (the height of the feed spacer, the angle of the filaments, and the porosity) on the removal of pollutants from wastewater have not yet been addressed. The current investigation aims to fill this gap by studying the hydrodynamics and design parameters of the selected parallelogram feed spacer type ultrafiltration (UF−3) for the removal of dimethylphenol from wastewater. Using model-based simulation, the impacts of UF−3 feed spacer design parameters, including the height, angle between the filaments (orientation), and porosity on the pressure drop, friction factor, axial flow fluid velocity, mass transfer coefficient, water flux, dimethylphenol rejection, recovery rate, and specific energy consumption are detailed in this study. The study intends to demonstrate the optimum design features of UF−3 feed spacer that should be considered to assure the highest elimination of dimethylphenol from wastewater in addition to the lowest specific energy consumption.
Ämnesord
- TEKNIK OCH TEKNOLOGIER -- Miljöbioteknik -- Vattenbehandling (hsv//swe)
- ENGINEERING AND TECHNOLOGY -- Environmental Biotechnology -- Water Treatment (hsv//eng)
Nyckelord
- wastewater treatment; reverse osmosis (RO) process; spiral wound module; feed spacer type UF−3; hydrodynamics
Publikations- och innehållstyp
- ref (ämneskategori)
- art (ämneskategori)
Hitta via bibliotek
-
Water
(Sök värdpublikationen i LIBRIS)
Till lärosätets databas