Sökning: id:"swepub:oai:DiVA.org:hv-13054" >
KCI-induced corrosi...
-
Jafari, R.Tarbiat Modares University, Department of Material Science and Engineering, Tehran, 14115, Iran
(författare)
KCI-induced corrosion behavior of HVAF-sprayed Ni-based coatings in ambient air
- Artikel/kapitelEngelska2017
Förlag, utgivningsår, omfång ...
-
Curran Associates, Inc.2017
-
printrdacarrier
Nummerbeteckningar
-
LIBRIS-ID:oai:DiVA.org:hv-13054
-
https://urn.kb.se/resolve?urn=urn:nbn:se:hv:diva-13054URI
Kompletterande språkuppgifter
-
Språk:engelska
-
Sammanfattning på:engelska
Ingår i deldatabas
Klassifikation
-
Ämneskategori:ref swepub-contenttype
-
Ämneskategori:kon swepub-publicationtype
Anmärkningar
-
It is well known that the presence of KCl deposited on superheater tubes in biomass- and waste-fired boilers leads to a severe corrosion and premature damage. In order to protect such critical components which are routinely exposed to aggressive environments, thermal spray coatings are frequently proposed as a potential solution. By virtue of the techno-commercial benefits that provides as a direct outcome of its ability to cost-effectively deposit coatings virtually free of porosity and in situ formed oxides, the high velocity air-fuel (HVAF) process offers a particularly attractive approach. In the present work, the influence of KCl on the oxidation behavior of four HVAF-sprayed Ni-based coatings (Ni21Cr, Ni5AI, Ni21Cr7AI1Y, and Ni21Cr9Mo) has been investigated. The coatings were deposited onto specimens of 16Mo3 steel, a widely used boiler tube material. High temperature corrosion tests were carried out in ambient air at 600°C, with 0.1 mg/cm2 KCl being sprayed onto the samples prior to the exposure. Uncoated substrates and an identical test environment without KCl were used as reference. SEM/EDS and XRD techniques were utilized to characterize the as-sprayed and exposed samples. The results showed that the small addition of KCl significantly accelerated damage to the coatings. It was further revealed that the alumina-forming NiAl coating was capable of forming a more protective oxide scale compared to other chromia and mixed-oxide scale forming coatings. In general, the oxidation resistance of the coatings based on the kinetic studies had the following ranking (from the best to the worst): NiAl >NiCr> NiCrAlY> NiCrMo. © Copyright 2017 by DVS Media GmbH. All rights reserved.
Ämnesord och genrebeteckningar
Biuppslag (personer, institutioner, konferenser, titlar ...)
-
Sadeghimeresht, Esmaeil,1985-Högskolan Väst,Avdelningen för avverkande och additativa tillverkningsprocesser (AAT),PTW(Swepub:hv)esasad
(författare)
-
Shahrabi Farahani, T.Tarbiat Modares University, Department of Material Science and Engineering, Tehran, 14115, Iran
(författare)
-
Markocsan, Nicolaie,1967-Högskolan Väst,Avdelningen för avverkande och additativa tillverkningsprocesser (AAT),PTW(Swepub:hv)tnm
(författare)
-
Joshi, Shrikant V.,1960-Högskolan Väst,Forskningsmiljön produktionsteknik(PTW),PTW(Swepub:hv)shrjos
(författare)
-
Tarbiat Modares University, Department of Material Science and Engineering, Tehran, 14115, IranAvdelningen för avverkande och additativa tillverkningsprocesser (AAT)
(creator_code:org_t)
Sammanhörande titlar
-
Ingår i:Proceedings of the International Thermal Spray Conference & Exposition (ITSC 2017): Curran Associates, Inc., s. 946-9509781510858220
Internetlänk
Hitta via bibliotek
Till lärosätets databas