Sökning: L773:0177 4832 OR L773:1611 3683
> (2010-2014) >
Determination of Ex...
-
Glaser, BjörnKTH,Mikro-modellering
(författare)
Determination of Experimental Conditions for Applying Hot Wire Method to Thermal Conductivity of Slag
- Artikel/kapitelEngelska2013
Förlag, utgivningsår, omfång ...
-
2013-01-29
-
Wiley,2013
-
printrdacarrier
Nummerbeteckningar
-
LIBRIS-ID:oai:DiVA.org:kth-103330
-
https://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-103330URI
-
https://doi.org/10.1002/srin.201200206DOI
Kompletterande språkuppgifter
-
Språk:engelska
-
Sammanfattning på:engelska
Ingår i deldatabas
Klassifikation
-
Ämneskategori:ref swepub-contenttype
-
Ämneskategori:art swepub-publicationtype
Anmärkningar
-
QC 20130830. Updated from accepted to published.
-
In order to apply the hot wire method for metallurgical slags at steelmaking temperatures, a numerical model was developed, cold model experiments were conducted and test measurements using a high temperature experimental setup were carried out. To minimize natural convection and obtain more reliable measurements, the crucible diameter, the hot-wire diameter, the applied current, the position of the wire in the crucible, and the cooling on the upper surface of the crucible were studied. Investigations into the choice of sheathing material of the circuit exposed to the slag were also made. It was found that only certain materials were suitable for slag measurements depending on slag composition and temperature. The electrical resistivity of the hot wire was measured to make the thermal conductivity calculation more reliable. The wire diameter also played a major role, because of the heat generation per surface area. The thermal conductivity should be derived from the values measured during the first seconds. In this initial stage, the effect of the natural convection as a function of the wire position in the crucible, the cooling on the top surface, and the diameter of the crucible are negligible. A compromise has to be made in choosing the electrical current, since higher current results in higher sensitivity but at the same time in more natural convection.
Ämnesord och genrebeteckningar
Biuppslag (personer, institutioner, konferenser, titlar ...)
-
Ma, LuyaoKTH,Mikro-modellering(Swepub:kth)u1xg2l7d
(författare)
-
Sichen, DuKTH,Mikro-modellering(Swepub:kth)u1n5hwwp
(författare)
-
KTHMikro-modellering
(creator_code:org_t)
Sammanhörande titlar
-
Ingår i:Steel Research International: Wiley84:7, s. 649-6631611-36831869-344X
Internetlänk
Hitta via bibliotek
Till lärosätets databas