Sökning: WFRF:(Inoue Shigeru) >
Characteristics of ...
Characteristics of solid flow and stress distribution including asymmetric phenomena in blast furnace analyzed by discrete element method
-
- Natsui, Shungo (författare)
- Institute of Multidisciplinary Research for Advanced Materials, Tohoku University
-
- Ueda, Shigeru (författare)
- Institute of Multidisciplinary Research for Advanced Materials, Tohoku University
-
- Fan, Zhengyun (författare)
- Institute of Multidisciplinary Research for Advanced Materials, Tohoku University
-
visa fler...
-
- Andersson, Nils (författare)
- Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, Sendai 980-8577, Japan
-
- Kano, Junya (författare)
- Institute of Multidisciplinary Research for Advanced Materials, Tohoku University
-
- Inoue, Ryo (författare)
- Institute of Multidisciplinary Research for Advanced Materials, Tohoku University
-
- Ariyama, Tatsuro (författare)
- Institute of Multidisciplinary Research for Advanced Materials, Tohoku University
-
visa färre...
-
(creator_code:org_t)
- Iron and Steel Institute of Japan, 2010
- 2010
- Engelska.
-
Ingår i: ISIJ International. - : Iron and Steel Institute of Japan. - 0915-1559 .- 1347-5460. ; 50:2, s. 207-214
- Relaterad länk:
-
https://doi.org/10.2...
-
visa fler...
-
https://www.jstage.j...
-
https://urn.kb.se/re...
-
https://doi.org/10.2...
-
visa färre...
Abstract
Ämnesord
Stäng
- Since the solid flow in blast furnace is composed of each particle motion, the discontinuous phenomena of burden descending can be occasionally observed. Understanding of the solid flow is important for blast furnace operation. Discrete Element Method (DEM) can offer the behavior for each particle of burden in the furnace. Three dimensional analysis of solid motion containing the ununiform region became possible with using DEM.In the present study, a blast furnace of 2000 m3 inner volume with 16 tuyeres was taken as the object for the simulation. Firstly, the stream line of solid, velocity variation and stress field in blast furnace were simultaneously analyzed by using the characteristic of DEM on each particle movement. Especially, the transient behavior on velocity and stress distribution during charging and slipping were calculated. The fundamental characteristics of burden descending became clear. Secondly, this study has focused on the asymmetric phenomena in the blast furnace on the basis of the above results. In this calculation, number of active tuyere was intentionally varied. The stress network showed the remarkable change in this case. Moreover, it was found that many local slips between particles were distributed in the bosh and they concentrated on the region nearby the active raceway due to the weakened stress. The stress network is closely related the particle velocity distribution. The consumption rate of coke in the tuyere significantly affected on the circumferential uniformity. Totally, the discontinuous burden descending and the characteristic of particle movement were essentially understood.
Ämnesord
- TEKNIK OCH TEKNOLOGIER -- Materialteknik -- Metallurgi och metalliska material (hsv//swe)
- ENGINEERING AND TECHNOLOGY -- Materials Engineering -- Metallurgy and Metallic Materials (hsv//eng)
Nyckelord
- ironmaking
- blast furnace
- mathematical model
- discrete element method
- stress
- slip
- solid motion
- Teknisk materialvetenskap
- Materials Science and Engineering
Publikations- och innehållstyp
- ref (ämneskategori)
- art (ämneskategori)
Hitta via bibliotek
Till lärosätets databas