Fe2MoO4 as a precursor material for Mo alloying in steel : (Part II): Upscaling test

• The Mo yield when using three different alloying mixtures (MoO3 +C; MoO3 +C + FeOx; and MoO3+ C + CaO) was tested both in laboratory experiments (16 g and 0.5 kg scale) and industrial trials (3 ton scale). The alloying is based on in-situ formation of compounds of Mo in the mixtures from molybdenite concentrate with industrial grade Fe 2O3. Thermogravimetry (TGA) and X-ray diffraction (XRD) analyses were performed to identify the reduction steps and final products of the alloying mixtures. At least two steps of mass change were discovered during the reduction of all tested mixtures by carbon. The Mo yield for MoO3 + C mixture is 93% which was confirmed by both laboratory and industrial experiments. The Mo yield for MoO3 + C + CaO mixture is around 92% during 16 g scale laboratory and 3 ton scale industrial tests. The best results were obtained in the case of the mixture which contained FeOx, MoO3 and C, resulting in the Mo yield up to 98% at all the experiment scale levels. It was found that the combination of both lower evaporation and fast reduction by carbon of the mixture along with further dissolution in steel are necessary to provide high Mo yield during steel alloying. The calculated mass balance of 3 ton trial heats showed that only a small part of initial Mo amount (8-13 ppm) has gone into slag. Copyright

Ämnesord

TEKNIK OCH TEKNOLOGIER  -- Materialteknik -- Metallurgi och metalliska material (hsv//swe)

ENGINEERING AND TECHNOLOGY  -- Materials Engineering -- Metallurgy and Metallic Materials (hsv//eng)

Nyckelord

Fe2MoO4

industrial test

Mo yields

steel alloying

Metallurgical process engineering

Metallurgisk processteknik

Publikations- och innehållstyp

ref (ämneskategori)

art (ämneskategori)