Sökning: L773:1996 1944 OR L773:1996 1944 >
Influence of Carbon...
Influence of Carbon Nanoparticle Addition (and Impurities) on Selective Laser Melting of Pure Copper
-
Jadhav, Suraj Dinkar (författare)
-
- Dadbakhsh, Sasan (författare)
- KTH,Industriell produktion,PMA, Department of Mechanical Engineering, Belgium
-
Vleugels, Jozef (författare)
-
visa fler...
-
Hofkens, Johan (författare)
-
Puyvelde, Peter Van (författare)
-
Yang, Shoufeng (författare)
-
Kruth, Jean-Pierre (författare)
-
Humbeeck, Jan Van (författare)
-
Vanmeensel, Kim (författare)
-
visa färre...
-
(creator_code:org_t)
- 2019-08-02
- 2019
- Engelska.
-
Ingår i: Materials. - : MDPI AG. - 1996-1944. ; 12:15
- Relaterad länk:
-
https://doi.org/10.3...
-
visa fler...
-
https://www.mdpi.com...
-
https://www.mdpi.com...
-
https://urn.kb.se/re...
-
https://doi.org/10.3...
-
visa färre...
Abstract
Ämnesord
Stäng
- The addition of 0.1 wt % carbon nanoparticles significantly improved the optical absorption and flowability of gas-atomized copper powder. This facilitated selective laser melting (SLM) by reducing the required laser energy density to obtain 98% dense parts. Moreover, the carbon addition led to an in situ de-oxidation of the copper parts during the SLM process. The properties of the as-built copper parts were limited to a tensile strength of 125 MPa, a ductility of 3%, and an electrical conductivity of 22.7 × 106 S/m, despite the advantageous effect of carbon on the powder characteristics and SLM behavior. The modest mechanical properties were associated with the segregation of carbon nanoparticles and other impurities, such as phosphorus and oxygen along grain boundaries of epitaxially grown grains. Whereas, the low electrical conductivity was mainly attributed to the phosphorus impurity in solid-solution with copper.
Publikations- och innehållstyp
- ref (ämneskategori)
- art (ämneskategori)
Hitta via bibliotek
Till lärosätets databas