Influence of tension and compression dwell on the creep-fatigue properties of the austenitic cast iron Ni-resist D5S

• Creep-fatigue tests with either tension or compression dwell and reference low-cycle fatigue test without dwell were conducted on the austenitic cast iron D5S in atmospheric air at 800oC to investigate the influence of dwell time on lifetime and the corresponding failure mechanisms. The addition of tension or compression dwell reduces the lifetime, by up to 50% and 80% in the tested range, respectively. Compared with tension dwell, compression dwell is found to be more detrimental and could further reduce the lifetime by up to 60%. Tension and compression dwell are seen to cause a thicker and thinner gauge length, respectively. Tension dwell causes the formation of creep pinholes at the graphite/matrix interface and subgrain boundaries, leading to the formation of internal microcracks. Compression dwell results in forming large cavities at the graphite/matrix interface. The intermetallics in an untested sample are found to contain G phase, Ni31Si12, ?-Fe, and M7C3. The intermetallics in an LCF-tested sample are found to contain G phase, Ni31Si12, M7C3, and ? phase. Cracks inside intermetallics are found to form at the interfaces between Ni31Si12/? phase, M7C3/? phase, and Ni31Si12/M7C3.

Ämnesord

TEKNIK OCH TEKNOLOGIER  -- Materialteknik -- Metallurgi och metalliska material (hsv//swe)

ENGINEERING AND TECHNOLOGY  -- Materials Engineering -- Metallurgy and Metallic Materials (hsv//eng)

Nyckelord

Creep fatigue

Tension &amp

compression dwell

High-temperature oxidation

Intermetallics

Ni-resist D5S

Publikations- och innehållstyp

ref (ämneskategori)

art (ämneskategori)