Sökning: L773:1359 4311 OR L773:1873 5606 >
Experimental compar...
Experimental comparative analysis of close-contact and constrained melting of n-eicosane in a finned rectangular cavity
-
- Abdi, Amir (författare)
- KTH,Tillämpad termodynamik och kylteknik
-
- Rastan, Hamidreza (författare)
- KTH,Energiteknik
-
(creator_code:org_t)
- Elsevier BV, 2023
- 2023
- Engelska.
-
Ingår i: Applied Thermal Engineering. - : Elsevier BV. - 1359-4311 .- 1873-5606. ; 219
- Relaterad länk:
-
https://doi.org/10.1...
-
visa fler...
-
https://urn.kb.se/re...
-
https://doi.org/10.1...
-
visa färre...
Abstract
Ämnesord
Stäng
- The present study demonstrates and visualizes the two modes of constrained melting and close-contact melting in a rectangular cavity enhanced with fins. Three configurations of fin with different lengths and numbers are tested in different horizontal, inclined, and vertical orientations. N-eicosane is used as the phase change material, and the experiments are performed with water as the heat transfer fluid at the inlet conditions of 50 degrees C, 55 degrees C, and 60 degrees C. In general, the close-contact melting time is shorter by 42-50%, compared to the convection dominated constrained melting in the unenhanced cavity without fins. By using fins to enhance the process, the melting time is reduced by 49% and 35% in the constrained and the close-contact modes, respectively, compared to the unfinned cavity in each mode. The thermal performance is observed to be superior in the horizontal and the inclined orientations. In these orientations, the buoyancy-driven structures are not blocked by fins in the con-strained mode. In the close-contact mode, the solid specimens attain more consistent contact with the base of the cavity and with the extended heat transfer area at the inclined and horizontal conditions. In the vertical orientation, the asymmetrical melting by the fins results in a rotational movement of the solid PCM and close -contact perturbations. The variations in the number of fins are found to have minor effects on the overall close-contact-induced melting. On the other hand, increasing the length of the fins is a more promising measure, providing consistent and prolonged contact.
Ämnesord
- TEKNIK OCH TEKNOLOGIER -- Maskinteknik -- Energiteknik (hsv//swe)
- ENGINEERING AND TECHNOLOGY -- Mechanical Engineering -- Energy Engineering (hsv//eng)
Nyckelord
- Melting
- Rectangular
- Constrained
- Close-contact
- Fin
Publikations- och innehållstyp
- ref (ämneskategori)
- art (ämneskategori)
Hitta via bibliotek
Till lärosätets databas