Improving the layout of recycling centres by use of lean production principles

↓ Direkt till sidans innehåll
↓ Direkt till sidans sekundära innehåll (sidomenyn)

Sökning: WFRF:(Eklund Erik) > Improving the layou...

Sundin, ErikLinköpings universitet,Monteringsteknik,Tekniska högskolan (författare)

Improving the layout of recycling centres by use of lean production principles

Artikel/kapitelEngelska2011

Förlag, utgivningsår, omfång ...

Elsevier Science B.V., Amsterdam.2011
electronicrdacarrier

Nummerbeteckningar

LIBRIS-ID:oai:DiVA.org:liu-68775
https://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-68775URI
https://doi.org/10.1016/j.wasman.2010.12.021DOI
https://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-80307URI

Kompletterande språkuppgifter

Språk:engelska
Sammanfattning på:engelska

Ingår i deldatabas

SwePubSwePub

Klassifikation

Ämneskategori:ref swepub-contenttype
Ämneskategori:art swepub-publicationtype

Anmärkningar

Original Publication: Erik Sundin, Mats Björkman, Mats Eklund, Jörgen Eklund and Inga-Lill Engkvist, Improving the layout of recycling centres by use of lean production principles, 2011, WASTE MANAGEMENT, (31), 6, 1121-1132. http://dx.doi.org/10.1016/j.wasman.2010.12.021 Copyright: Elsevier Science B.V., Amsterdam. http://www.elsevier.com/
QC 20120210. QC 20211016
There has been increased focus on recycling in Sweden during recent years. This focus can be attributed to external environmental factors such as tougher legislation, but also to the potential gains for raw materials suppliers. Recycling centres are important components in the Swedish total recycling system. Recycling centres are manned facilities for waste collection where visitors can bring, sort and discard worn products as well as large-sized, hazardous, and electrical waste. The aim of this paper was to identify and describe the main flows and layout types at Swedish recycling centres. The aim was also to adapt and apply production theory for designing and managing recycling centre operations. More specifically, this means using lean production principles to help develop guidelines for recycling centre design and efficient control. Empirical data for this research was primarily collected through interviews and questionnaires among both visitors and employees at 16 Swedish recycling centres. Furthermore, adapted observation protocols have been used in order to explore visitor activities. There was also close collaboration with a local recycling centre company, which shared their layout experiences with the researchers in this project. The recycling centres studied had a variety of problems such as queues of visitors, overloading of material and improper sorting. The study shows that in order to decrease the problems, the recycling centres should be designed and managed according to lean production principles, i.e. through choosing more suitable layout choices with visible and linear flows, providing better visitor information, and providing suitable technical equipment. Improvements can be achieved through proper planning of the layout and control of the flow of vehicles, with the result of increased efficiency and capacity, shorter visits, and cleaner waste fractions. The benefits of a lean production mindset include increased visitor capacity, waste flexibility, improved sorting quality, shorter time for visits and improved working conditions.

Ämnesord och genrebeteckningar

TEKNIK OCH TEKNOLOGIER Maskinteknik Produktionsteknik, arbetsvetenskap och ergonomi hsv//swe
ENGINEERING AND TECHNOLOGY Mechanical Engineering Production Engineering, Human Work Science and Ergonomics hsv//eng
TECHNOLOGY
TEKNIKVETENSKAP

Biuppslag (personer, institutioner, konferenser, titlar ...)

Björkman, MatsLinköpings universitet,Monteringsteknik,Tekniska högskolan(Swepub:liu)matbj27 (författare)
Eklund, MatsLinköpings universitet,Industriell miljöteknik,Tekniska högskolan(Swepub:liu)matek57 (författare)
Eklund, JörgenKTH,Ergonomi,Division of Environmental Technology and Management, Department of Management and Engineering, Linköping University,Division of Ergonomics, School of Technology and Health, Royal Institute of Technology, Huddinge(Swepub:kth)u1hfpzk0 (författare)
Engkvist, Inga-LillKTH,Ergonomi,Division of Ergonomics, School of Technology and Health, Royal Institute of Technology, Huddinge(Swepub:kth)u1dy0ce8 (författare)
Linköpings universitetMonteringsteknik (creator_code:org_t)

Sammanhörande titlar

Ingår i:WASTE MANAGEMENT: Elsevier Science B.V., Amsterdam.31:6, s. 1121-11320956-053X1879-2456

Internetlänk

Hitta via bibliotek

WASTE MANAGEMENT (Sök värdpublikationen i LIBRIS)

Till lärosätets databas

Hitta mer i SwePub

Av författaren/redakt...: Sundin, Erik; Björkman, Mats; Eklund, Mats; Eklund, Jörgen; Engkvist, Inga-L ...

Om ämnet

TEKNIK OCH TEKNOLOGIER: TEKNIK OCH TEKNO ...; och Maskinteknik; och Produktionstekni ...

Artiklar i publikationen: WASTE MANAGEMENT

Av lärosätet: Linköpings universitet; Kungliga Tekniska Högskolan

Sök utanför SwePub

Sök vidare i:: Google; Google Book Search; Google Scholar

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

LIBRIS.kb.se