SwePub
Sök i LIBRIS databas

  Utökad sökning

WFRF:(Bader Erik)
 

Sökning: WFRF:(Bader Erik) > Dowel deformations ...

  • Bader, Thomas K.,1980-Linnéuniversitetet,Institutionen för byggteknik (BY),Vienna University of Technology, Austria (författare)

Dowel deformations in multi-dowel LVL-connections under moment loading

  • Artikel/kapitelEngelska2015

Förlag, utgivningsår, omfång ...

  • 2015-08-17
  • Taylor & Francis,2015
  • electronicrdacarrier

Nummerbeteckningar

  • LIBRIS-ID:oai:DiVA.org:lnu-46194
  • https://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-46194URI
  • https://doi.org/10.1080/17480272.2015.1070372DOI
  • https://lup.lub.lu.se/record/7762742URI

Kompletterande språkuppgifter

  • Språk:engelska
  • Sammanfattning på:engelska

Ingår i deldatabas

Klassifikation

  • Ämneskategori:ref swepub-contenttype
  • Ämneskategori:art swepub-publicationtype

Anmärkningar

  • The aim of the experimental study presented herein is the assessment and quantification of the behavior of individual dowels in multi-dowel connections loaded by a bending moment. For this purpose, double-shear, steel-to-timber connections with nine steel dowels arranged in different patterns and with different dowel diameters were tested in four-point bending. In order to achieve a ductile behavior with up to 7° relative rotation, the connections were partly reinforced with self-tapping screws. The reinforcement did not influence the global load–deformation behavior, neither for dowel diameters of 12 mm nor for 20 mm, as long as cracking was not decisive. The deformation of the individual dowels was studied by means of a non-contact deformation measurement system. Thus, the crushing deformation, that is, the deformation at the steel plate, and the bending deformation of the dowels could be quantified. In the case of 12 mm dowels, the bending deformation was larger than the crushing deformation, while it was smaller in the case of 20 mm dowels. Moreover, dowels loaded parallel to the grain showed larger bending deformations than dowels loaded perpendicular to the grain. This indicates that the loading of the individual dowels in the connection differs depending on their location.

Ämnesord och genrebeteckningar

Biuppslag (personer, institutioner, konferenser, titlar ...)

  • Schweigler, MichaelVienna University of Technology, Austria(Swepub:lnu)miscaa (författare)
  • Hochreiner, GeorgVienna University of Technology, Austria (författare)
  • Serrano, Erik,1968-Lund University,Lunds universitet,Byggnadsmekanik,Institutionen för byggvetenskaper,Institutioner vid LTH,Lunds Tekniska Högskola,Structural Mechanics,Department of Construction Sciences,Departments at LTH,Faculty of Engineering, LTH,Lund University, Sweden(Swepub:lu)bygg-ese (författare)
  • Enquist, Bertil,1948-Linnéuniversitetet,Institutionen för byggteknik (BY)(Swepub:lnu)bensot (författare)
  • Dorn, Michael,1978-Linnéuniversitetet,Institutionen för byggteknik (BY)(Swepub:lnu)midoaa (författare)
  • LinnéuniversitetetInstitutionen för byggteknik (BY) (creator_code:org_t)

Sammanhörande titlar

  • Ingår i:Wood Material Science & Engineering: Taylor & Francis10:3, s. 216-2311748-02721748-0280

Internetlänk

Hitta via bibliotek

Till lärosätets databas

Sök utanför SwePub

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy