Sökning: id:"swepub:oai:DiVA.org:ltu-8861" >
Review of the lubri...
-
Baart, Pieter
(författare)
Review of the lubrication, sealing, and pumping mechanisms in oil- and grease-lubricated radial lip seals
- Artikel/kapitelEngelska2009
Förlag, utgivningsår, omfång ...
Nummerbeteckningar
-
LIBRIS-ID:oai:DiVA.org:ltu-8861
-
https://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-8861URI
-
https://doi.org/10.1243/13506501JET473DOI
Kompletterande språkuppgifter
-
Språk:engelska
-
Sammanfattning på:engelska
Ingår i deldatabas
Klassifikation
-
Ämneskategori:ref swepub-contenttype
-
Ämneskategori:art swepub-publicationtype
Anmärkningar
-
Validerad; 2009; 20090312 (ysko)
-
Radial lip seals are successfully used since the 1940s to seal lubricated systems. Despite extensive experimental and theoretical research in the field, it is still not fully clear how these seals function. Experimental studies, found in the public literature, show that the relatively high surface roughness of the seal lip is very important for good and reliable performance. In addition, the pressure distribution under the lip seems to be a critical factor. Six fundamental hypotheses are presented on the lubrication, pumping, and sealing mechanisms to explain the working principles of these seals. It is generally accepted that lubrication results from micro-elastohydrodynamic film build up between the rough seal surface and the shaft. Non-symmetrical tangential deformations of the lip surface are observed during experiments and assumed to act like spiral groove bearings that generate a pumping action and lubricant film. Another hypothesis suggests that the lubricant will behave non-Newtonian under the very high shear rates experienced in operating conditions. This will reduce friction because of shear-thinning and enhances sealing. Macroscopic aids, like hydrodynamic pumping aids and engineered asperity patterns on the shaft, do improve seal performance. Almost all public literature discusses oil-lubricated radial lip seals while many seals are grease lubricated, especially in certain technical fields. Due to the non-Newtonian behaviour of grease, the lubrication, sealing, and pumping mechanisms are assumed to differ from the oil-lubricated seals. Lower friction and improved protection against contamination are measured, and it is expected that the interest in grease lubrication will rapidly grow in future.
Ämnesord och genrebeteckningar
Biuppslag (personer, institutioner, konferenser, titlar ...)
-
Lugt, Piet
(författare)
-
Prakash, BrahamLuleå tekniska universitet,Maskinelement(Swepub:ltu)brap
(författare)
-
Luleå tekniska universitetMaskinelement
(creator_code:org_t)
Sammanhörande titlar
-
Ingår i:Proceedings of the Institution of mechanical engineers. Part J, journal of engineering tribology223:3, s. 347-3581350-65012041-305X
Internetlänk
Hitta via bibliotek
Till lärosätets databas