The effect of disintegrated iron-ore pellet dust on deposit formation in a pilot-scale pulverized coal combustion furnace. Part II : Thermochemical equilibrium calculations and viscosity estimations

• Fly ash particles from the combustion of solid-fuels together with disintegrated particles arising from iron-ore pellets result in accumulation of deposits on the refractory linings of the grate-kiln induration machine during the iron-ore pelletizing process. The deposits amass in the high-temperature regions of the induration furnace thus disturbing the flow of gas and pellets. Therefore, to tackle the above-mentioned issues, an understanding of deposit formation mechanism is of crucial importance. This study was conducted with the objective of addressing the effect of disintegrated iron-ore pellet dust on deposit formation and the mechanisms behind deposition (slagging) in the grate-kiln process. A comprehensive set of experiments was conducted in a 0.4 MW pilot-scale pulverized-coal- fired furnace where three different scenarios were considered as follows; Case 1 (reference case): Coal was combusted without the presence of pellet dust. Case 2: Natural gas was combusted together with simultaneous addition of pellet dust to the gas stream. Case 3: Coal was combusted together with the addition of pellet dust simulating the situation in the large-scale setup. Fly ash particles and short-term deposits were characterized and deposition was addressed in Part I of this study. In light of the experimental observations (Part I) and the thermochemical equilibrium calculations (Part II), a scheme of ash transformation during the iron-ore pelletizing process was proposed. The dissolution of hematite particles into the Ca-rich-aluminosilicate melt (from the coal-ash constituents) decreased the viscosity and resulted in the formation of stronger (heavily sintered) deposits. Overall, this pilot-scale work forms part of a wider study which aims at deepening the understanding of ash transformation phenomena during the large-scale pelletizing process.

Ämnesord

TEKNIK OCH TEKNOLOGIER  -- Maskinteknik -- Energiteknik (hsv//swe)

ENGINEERING AND TECHNOLOGY  -- Mechanical Engineering -- Energy Engineering (hsv//eng)

TEKNIK OCH TEKNOLOGIER  -- Kemiteknik (hsv//swe)

ENGINEERING AND TECHNOLOGY  -- Chemical Engineering (hsv//eng)

TEKNIK OCH TEKNOLOGIER  -- Materialteknik -- Metallurgi och metalliska material (hsv//swe)

ENGINEERING AND TECHNOLOGY  -- Materials Engineering -- Metallurgy and Metallic Materials (hsv//eng)

TEKNIK OCH TEKNOLOGIER  -- Kemiteknik -- Kemiska processer (hsv//swe)

ENGINEERING AND TECHNOLOGY  -- Chemical Engineering -- Chemical Process Engineering (hsv//eng)

Nyckelord

Coal combustion

Deposition (slagging)

Iron-ore pellet dust

Iron-ore pelletizing

Thermochemical equilibrium calculations

Calcium compounds

Coal

Coal ash

Coal deposits

Coal dust

Deposits

Economic geology

Fly ash

Furnaces

Hematite

Iron deposits

Iron ore pellets

Iron ores

Kilns

Pelletizing

Pulverized fuel

Viscosity

Alumino-silicate melts

Combustion of solid fuels

Deposit formation mechanism

Iron ore pelletizing

Pulverized coal combustion

Pulverized coal-fired furnaces

Thermochemical equilibrium

Viscosity estimation

Energy Engineering

Chemical Technology

Process Metallurgy

Publikations- och innehållstyp

ref (ämneskategori)

art (ämneskategori)