SwePub
Sök i LIBRIS databas

  Utökad sökning

onr:"swepub:oai:DiVA.org:ri-57920"
 

Sökning: onr:"swepub:oai:DiVA.org:ri-57920" > Characteristics of ...

  • Yuan, Miwen,1990Chalmers University of Technology, Sweden,Central South University,Chalmers tekniska högskola (författare)

Characteristics of a modified H13 hot-work tool steel fabricated by means of laser beam powder bed fusion

  • Artikel/kapitelEngelska2022

Förlag, utgivningsår, omfång ...

  • Elsevier Ltd,2022
  • printrdacarrier

Nummerbeteckningar

  • LIBRIS-ID:oai:DiVA.org:ri-57920
  • https://urn.kb.se/resolve?urn=urn:nbn:se:ri:diva-57920URI
  • https://doi.org/10.1016/j.msea.2021.142322DOI
  • https://research.chalmers.se/publication/527258URI

Kompletterande språkuppgifter

  • Språk:engelska
  • Sammanfattning på:engelska

Ingår i deldatabas

Klassifikation

  • Ämneskategori:ref swepub-contenttype
  • Ämneskategori:art swepub-publicationtype

Anmärkningar

  •  Funding details: VINNOVA, 2016–03305; Funding details: Chalmers Tekniska Högskola; Funding details: China Scholarship Council, CSC; Funding text 1: This study is supported by Vinnova (Sweden's Innovation Agency) No. 2016–03305 , China Scholarship Council ( CSC ) and Production Area of Advance, Chalmers University of Technology, Sweden .
  • In the present study, a modified H13 hot-work tool steel (M-H13) was fabricated by laser beam powder bed fusion (LB-PBF). The effect of two types of post processing, direct tempering from as-built condition (DT) and conventional quenching followed by tempering (QT), on the microstructure and mechanical properties was evaluated. The typical microstructure in QT condition was tempered martensite with carbides along lath boundaries. In DT condition, melt pool boundaries and cellular structure from as-built condition were still observed. While comparable tensile properties and hardness were obtained, DT samples exhibited significantly lower impact toughness compared to QT samples. This was attributed to the difference in work hardening ability and strain rate sensitivity originating from different microstructures obtained under these two heat treatment conditions. The study was also focused on the softening behavior and the correlation with the microstructure of the two post treatments at the elevated temperatures. It was found that the DT samples showed lower thermal softening compared to QT samples. The evolution of carbides was discussed based on the microanalysis results and the JMatPro simulation. © 2021 The Authors

Ämnesord och genrebeteckningar

Biuppslag (personer, institutioner, konferenser, titlar ...)

  • Cao, Yu,1969Chalmers University of Technology, Sweden; Central South University, China,Chalmers tekniska högskola(Swepub:cth)yucao (författare)
  • Karamchedu, Seshendra,1987Uddeholms AB, Sweden(Swepub:cth)seskar (författare)
  • Hosseini, SeyedRISE,Tillverkningsprocesser,Chalmers University of Technology, Sweden,Chalmers tekniska högskola,RISE Research Institutes of Sweden(Swepub:cth)mi0hobe (författare)
  • Yao, Yiming,1957Chalmers University of Technology, Sweden,Chalmers tekniska högskola(Swepub:cth)yimin (författare)
  • Berglund, JohanRISE,Tillverkningsprocesser,Chalmers University of Technology, Sweden,RISE Research Institutes of Sweden,Chalmers tekniska högskola(Swepub:cth)berjohan (författare)
  • Liu, L.Central South University, China (författare)
  • Nyborg, Lars,1958Chalmers University of Technology, Sweden,Chalmers tekniska högskola(Swepub:cth)nyborg (författare)
  • Chalmers University of Technology, SwedenCentral South University (creator_code:org_t)

Sammanhörande titlar

  • Ingår i:Materials Science & Engineering: Elsevier Ltd8310921-50931873-4936

Internetlänk

Hitta via bibliotek

Till lärosätets databas

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy