Sökning: (L773:1006 7191 OR L773:2194 1289)
> (2015-2019) >
Cracking Behavior i...
Cracking Behavior in Additively Manufactured Pure Tungsten
-
Wang, Dian-Zheng (författare)
-
Li, Kai-Lun (författare)
-
Yu, Chen-Fan (författare)
-
visa fler...
-
Ma, Jing (författare)
-
Liu, Wei (författare)
-
- Shen, Zhi-Jian (författare)
- Stockholms universitet,Institutionen för material- och miljökemi (MMK),Tsinghua University, China
-
visa färre...
-
(creator_code:org_t)
- 2018-05-19
- 2019
- Engelska.
-
Ingår i: Acta Metallurgica Sinica (English Letters). - : Springer Science and Business Media LLC. - 1006-7191 .- 2194-1289. ; 32:1, s. 127-135
- Relaterad länk:
-
https://www.amse.org...
-
visa fler...
-
https://urn.kb.se/re...
-
https://doi.org/10.1...
-
visa färre...
Abstract
Ämnesord
Stäng
- In this study, near fully dense (96.5%) pure tungsten bulks were additively manufactured and the cracking behavior was investigated. A crack network with a spacing of similar to 100m was observed in the fabricated bulks. It was observed that the laser scanning strategy, which could tailor the microstructure, affected the crack distribution pattern in fabricated tungsten. The calculated surface temperature difference (7300K) was much higher than the cracking criterion (800K) of tungsten, indicating that cracking is almost inevitable in laser additive manufacturing of tungsten. It could be concluded that crack network formed because the cracks emerged in every laser molten track and then interconnected in the layer-by-layer building process.
Ämnesord
- TEKNIK OCH TEKNOLOGIER -- Materialteknik (hsv//swe)
- ENGINEERING AND TECHNOLOGY -- Materials Engineering (hsv//eng)
Nyckelord
- Tungsten
- Selective laser melting
- Cracking
- Microstructure
Publikations- och innehållstyp
- ref (ämneskategori)
- art (ämneskategori)
Hitta via bibliotek
Till lärosätets databas