Sökning: id:"swepub:oai:DiVA.org:uu-96667" >
On adhesion of work...
-
Hanson, MagnusUppsala universitet,Tillämpad materialvetenskap
(författare)
On adhesion of work material in metal forming
- Artikel/kapitelEngelska2008
Förlag, utgivningsår, omfång ...
Nummerbeteckningar
-
LIBRIS-ID:oai:DiVA.org:uu-96667
-
https://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-96667URI
-
https://doi.org/10.1504/IJMMP.2008.018744DOI
Kompletterande språkuppgifter
-
Språk:engelska
-
Sammanfattning på:engelska
Ingår i deldatabas
Klassifikation
-
Ämneskategori:ref swepub-contenttype
-
Ämneskategori:art swepub-publicationtype
Anmärkningar
-
The transfer of work material to the tool surface limits the tool life in many forming operations. Using a dedicated load-scanning test equipment with crossed-cylinder geometry, dry forming of austenitic stainless steel was simulated by provoking adhesion to the TiN-coated tool specimen. High-resolution electron microscopy combined with analytical techniques was used to examine the interface between tool and work material. The decisive mechanism for adhesion and transfer of steel to the TiN surface is suggested. The oxide layer on the steel surface, especially the Fe-oxide, initiates the metal transfer. The interfacial oxide acts as a glue between stainless steel and TiN and increases the adhesive forces. Obviously, the adhesion and internal strength of the oxide layer is far stronger than anticipated. It may even be stronger than the bonding to the austenitic steel itself. A consequence of these findings is that the development of galling resistance-forming tool materials and coatings for austenitic stainless steels should not only aim to improve the bulk tool material, but also to reduce the adhesion strength between the tool surface and the oxide layer on the work material.
Ämnesord och genrebeteckningar
-
metal forming
-
adhesion
-
galling
-
stainless steel
-
TiN coating
-
transmission electron microscopy
-
TEM
-
focused ion beam
-
FIB
-
dry forming
-
metal transfer
-
interfacial oxide
-
austenitic steel
-
TECHNOLOGY
-
TEKNIKVETENSKAP
Biuppslag (personer, institutioner, konferenser, titlar ...)
-
Hogmark, StureUppsala universitet,Tillämpad materialvetenskap(Swepub:uu)sturhogm
(författare)
-
Coronel, Ernesto
(författare)
-
Persson, Daniel H.E.
(författare)
-
Uppsala universitetTillämpad materialvetenskap
(creator_code:org_t)
Sammanhörande titlar
-
Ingår i:International journal of microstructure and materials properties3:2-3, s. 401-4121741-8410
Internetlänk
Hitta via bibliotek
Till lärosätets databas