Continuous catalytic depolymerisation and conversion of industrial kraft lignin into low-molecular-weight aromatics

Abdelaziz, OmarLund University,Lunds universitet,Avdelningen för kemiteknik,Institutionen för processteknik och tillämpad biovetenskap,Institutioner vid LTH,Lunds Tekniska Högskola,Division of Chemical Engineering,Department of Process and Life Science Engineering,Departments at LTH,Faculty of Engineering, LTH (author)

Base-catalysed depolymerisation of lignin using sodium hydroxide has been shown to be an effective approach towards exploiting industrial (technical) lignins within the pulp and paper industry. In the present work, a pine kraft lignin (Indulin AT) which is precipitated from black liquor of linerboard-grade pulp was depolymerised via base catalysis to produce low-molecular-mass aromatics without any organic solvent/capping agent in a continuous-flow reactor setup for the first time. The catalytic conversion of lignin was performed/screened at temperatures varying from 170 to 250 °C, using NaOH/lignin weight ratio ≈ 1 with 5 wt% lignin solids loadings for residence times of 1, 2 and 4 min, respectively, with comprehensive characterisation of substrate and produced reaction mixtures. The products were characterised using size exclusion chromatography (SEC), nuclear magnetic resonance spectroscopy (NMR) and supercritical fluid chromatography-diode array detector-tandem mass spectrometry (SFC-MS). The optimum operating conditions for such depolymerisation appeared to be at 240 °C and 30 h−1, yielding the highest concentration of low-molecular-weight phenolics below the coking point. It was also found that the depolymerised lignin products exhibited better chemical stability during long-term storage at lower temperatures (~ 4 °C).

Li, KenaLund University,Lunds universitet,Avdelningen för kemiteknik,Institutionen för processteknik och tillämpad biovetenskap,Institutioner vid LTH,Lunds Tekniska Högskola,Division of Chemical Engineering,Department of Process and Life Science Engineering,Departments at LTH,Faculty of Engineering, LTH(Swepub:lu)ke3113li (author)
Tunå, PerLund University,Lunds universitet,Avdelningen för kemiteknik,Institutionen för processteknik och tillämpad biovetenskap,Institutioner vid LTH,Lunds Tekniska Högskola,Division of Chemical Engineering,Department of Process and Life Science Engineering,Departments at LTH,Faculty of Engineering, LTH(Swepub:lu)vok-prt (author)
Hulteberg, ChristianLund University,Lunds universitet,Avdelningen för kemiteknik,Institutionen för processteknik och tillämpad biovetenskap,Institutioner vid LTH,Lunds Tekniska Högskola,Division of Chemical Engineering,Department of Process and Life Science Engineering,Departments at LTH,Faculty of Engineering, LTH(Swepub:lu)chem-chu (author)
Avdelningen för kemiteknikInstitutionen för processteknik och tillämpad biovetenskap (creator_code:org_t)

In:Biomass Conversion and Biorefinery: Springer Science and Business Media LLC8:2, s. 455-4702190-68232190-6815

By the author/editor: Abdelaziz, Omar; Li, Kena; Tunå, Per; Hulteberg, Chris ...

About the subject

ENGINEERING AND TECHNOLOGY: ENGINEERING AND ...; and Materials Engine ...; and Paper Pulp and F ...

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.